Resources

A simple pendulum consisting of a small bob of mass m=0.250 kgm = 0.250\text{ kg} is attached to a light, inextensible string of length L=1.60 mL = 1.60\text{ m}. The pendulum is displaced by a small angle θ0=4.00∘\theta_0 = 4.00^\circ from the vertical and released from rest in a standard gravitational field where g=9.80 m/s2g = 9.80\text{ m/s}^2. Under the small-angle approximation, determine: (a) the period TT of oscillation, (b) the maximum linear speed vmaxv_{\text{max}} of the pendulum bob, and (c) the tension in the string FTF_T as the bob passes through its lowest equilibrium position.

Answer and steps

Final answer

(a) T=2.54 sT = 2.54\text{ s}; (b) vmax=0.276 m/sv_{\text{max}} = 0.276\text{ m/s}; (c) FT=2.46 NF_T = 2.46\text{ N}

Steps

Part (a): Period of the Pendulum

For small angular displacements (θ≤10∘\theta \le 10^\circ or about 0.17 rad0.17\text{ rad}), the restoring torque is approximately proportional to the angular displacement, so the pendulum executes simple harmonic motion (SHM).

The period TT of a simple pendulum depends only on its length LL and the acceleration due to gravity gg:

T=2πLgT = 2\pi \sqrt{\frac{L}{g}}

Substitute the given values:

T=2π1.60 m9.80 m/s2=2π0.1633 s2≈2.54 sT = 2\pi \sqrt{\frac{1.60\text{ m}}{9.80\text{ m/s}^2}} = 2\pi \sqrt{0.1633\text{ s}^2} \approx 2.54\text{ s}


Part (b): Maximum Linear Speed

The angular frequency of the motion is:

ω=gL=9.80 m/s21.60 m≈2.475 rad/s\omega = \sqrt{\frac{g}{L}} = \sqrt{\frac{9.80\text{ m/s}^2}{1.60\text{ m}}} \approx 2.475\text{ rad/s}

Convert the initial angular amplitude θ0\theta_0 from degrees to radians:

θ0=4.00∘×(π rad180∘)≈0.06981 rad\theta_0 = 4.00^\circ \times \left(\frac{\pi\text{ rad}}{180^\circ}\right) \approx 0.06981\text{ rad}

The linear amplitude along the circular arc is:

smax=Lθ0=(1.60 m)(0.06981 rad)≈0.1117 ms_{\text{max}} = L\theta_0 = (1.60\text{ m})(0.06981\text{ rad}) \approx 0.1117\text{ m}

In simple harmonic motion, maximum speed occurs as the bob passes through the equilibrium position and is given by:

vmax=ωsmax=(2.475 rad/s)(0.1117 m)≈0.276 m/sv_{\text{max}} = \omega s_{\text{max}} = \left(2.475\text{ rad/s}\right)(0.1117\text{ m}) \approx 0.276\text{ m/s}

(Alternative method via conservation of energy): The vertical drop from the release point is h=L(1−cos⁡θ0)≈12Lθ02h = L(1 - \cos\theta_0) \approx \frac{1}{2}L\theta_0^2. Using vmax=2ghv_{\text{max}} = \sqrt{2gh}, we obtain the same result, vmax≈0.276 m/sv_{\text{max}} \approx 0.276\text{ m/s}.

Pitfall: When using equations like s=Lθs = L\theta or evaluating small-angle approximations, the angle θ\theta must always be expressed in radians, not degrees.


Part (c): Tension at the Lowest Point

At the lowest (equilibrium) point of the swing, the bob moves along a circular path of radius R=LR = L with instantaneous speed vmaxv_{\text{max}}.

Two vertical forces act on the bob:

  1. Tension FTF_T, directed upward toward the pivot.
  2. Gravity mgmg, directed downward.

According to Newton's second law for uniform circular motion:

Fnet=FT−mg=mvmax2LF_{\text{net}} = F_T - mg = \frac{m v_{\text{max}}^2}{L}

Solving for the tension FTF_T:

FT=mg+mvmax2LF_T = mg + \frac{m v_{\text{max}}^2}{L}

Calculate each component:

  • Gravitational force: mg=(0.250 kg)(9.80 m/s2)=2.450 Nmg = (0.250\text{ kg})(9.80\text{ m/s}^2) = 2.450\text{ N}
  • Centripetal force: mvmax2L=(0.250 kg)(0.2764 m/s)21.60 m≈0.012 N\frac{m v_{\text{max}}^2}{L} = \frac{(0.250\text{ kg})(0.2764\text{ m/s})^2}{1.60\text{ m}} \approx 0.012\text{ N}

Combine the forces:

FT=2.450 N+0.012 N≈2.46 NF_T = 2.450\text{ N} + 0.012\text{ N} \approx 2.46\text{ N}

Pitfall: A common error is assuming the tension equals the weight (FT=mgF_T = mg) at the lowest position. Because the bob is following a curved path, there is an upward centripetal acceleration, meaning the string tension must exceed gravity by mv2L\frac{m v^2}{L}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert the angle from degrees to radians when using the small-angle amplitude formula v_max = √(gL)θ₀.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    T=2πLg=2π1.609.80  ⟹  T=2.54 sT = 2\pi \sqrt{\frac{L}{g}} = 2\pi \sqrt{\frac{1.60}{9.80}} \implies T = 2.54\text{ s}

  2. Step 2

    vmax=ω(Lθ0)=gL(Lθ0)=gLθ0  ⟹  vmax=9.80×1.60×4.00=3.96×4.00=15.8 m/sv_{\text{max}} = \omega (L\theta_0) = \sqrt{\frac{g}{L}}(L\theta_0) = \sqrt{gL}\theta_0 \implies v_{\text{max}} = \sqrt{9.80 \times 1.60} \times 4.00 = 3.96 \times 4.00 = 15.8\text{ m/s}

    Correct

    θ0=4.00∘×(π180∘)≈0.06981 rad  ⟹  vmax=gLθ0=(9.80)(1.60)(0.06981)≈0.276 m/s\theta_0 = 4.00^\circ \times \left(\frac{\pi}{180^\circ}\right) \approx 0.06981\text{ rad} \implies v_{\text{max}} = \sqrt{gL}\theta_0 = \sqrt{(9.80)(1.60)}(0.06981) \approx 0.276\text{ m/s}

    Your algebraic derivation vmax=gLθ0v_{\text{max}} = \sqrt{gL}\theta_0 is excellent, but arc length s=Lθs = L\theta and small-angle relations require θ\theta to be in dimensionless radians. Substituting 4.00∘4.00^\circ directly overestimates the speed by a factor of 180/π≈57.3180/\pi \approx 57.3.

  3. Step 3

    FT−mg=m(vmax)2L  ⟹  FT=0.250(9.80)+0.250(15.8)21.60=2.45+39.0=41.5 NF_T - mg = \frac{m(v_{\text{max}})^2}{L} \implies F_T = 0.250(9.80) + \frac{0.250(15.8)^2}{1.60} = 2.45 + 39.0 = 41.5\text{ N}

    Correct

    FT=mg+mvmax2L=0.250(9.80)+0.250(0.2764)21.60=2.450+0.012=2.46 NF_T = mg + \frac{m v_{\text{max}}^2}{L} = 0.250(9.80) + \frac{0.250(0.2764)^2}{1.60} = 2.450 + 0.012 = 2.46\text{ N}

    Your Newton's second law setup for circular motion at the bottom of the swing is completely correct. The resulting value 41.5 N41.5\text{ N} is incorrect solely because it uses the erroneous speed from part (b).

WHAT YOU DID WELL
Compliments from Your Teacher

You used the correct period formula for a simple pendulum and calculated T=2.54 sT = 2.54\text{ s} accurately.

You correctly derived the relationship vmax=ωsmax=gLθ0v_{\text{max}} = \omega s_{\text{max}} = \sqrt{gL}\theta_0 using simple harmonic motion kinematics.

You correctly accounted for both gravitational force and upward centripetal acceleration when setting up the net force at the lowest position.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Degree-to-radian conversion omitted

You plugged 4.004.00 directly into gLθ0\sqrt{gL}\theta_0 without converting degrees to radians.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating angular amplitude as an arbitrary numerical coefficient rather than recognizing that linear-angular kinematic formulas (s=rθs = r\theta, v=rωv = r\omega) are strictly derived under the radian definition of angle.

REASONING PATH
Your ACEpath teacher’s suggested approach
Angular Measurement in Kinematics
  • Any formula relating linear quantities to angular quantities (s=Lθs = L\theta, at=Lαa_t = L\alpha) requires angles to be measured in radians.

  • Whenever you see an angle given in degrees in a kinematics or calculus-based formula, immediately convert it using θrad=θdeg×π180∘\theta_{\text{rad}} = \theta_{\text{deg}} \times \frac{\pi}{180^\circ} before computing.

Physical Reasonableness Check
  • A pendulum bob released from rest at a tiny angle of 4.00∘4.00^\circ should have a maximum speed of a few tens of centimeters per second.

  • Compare your calculated speed against simple energy estimates: h≈12Lθ2h \approx \frac{1}{2}L\theta^2 gives a drop of only about 4 mm4\text{ mm}, which cannot yield a speed of nearly 16 m/s16\text{ m/s} (about 35 mph35\text{ mph}).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the release angle to radians: θ0=4.00∘×π180∘=0.06981 rad\theta_0 = 4.00^\circ \times \frac{\pi}{180^\circ} = 0.06981\text{ rad}.

  2. Calculate maximum speed: vmax=(9.80 m/s2)(1.60 m)×0.06981 rad=(3.960 m/s)(0.06981)≈0.276 m/sv_{\text{max}} = \sqrt{(9.80\text{ m/s}^2)(1.60\text{ m})} \times 0.06981\text{ rad} = (3.960\text{ m/s})(0.06981) \approx 0.276\text{ m/s}.

  3. Substitute vmax=0.2764 m/sv_{\text{max}} = 0.2764\text{ m/s} into your tension equation: FT=mg+mvmax2L=2.450 N+(0.250 kg)(0.2764 m/s)21.60 m=2.450 N+0.012 N=2.46 NF_T = mg + \frac{m v_{\text{max}}^2}{L} = 2.450\text{ N} + \frac{(0.250\text{ kg})(0.2764\text{ m/s})^2}{1.60\text{ m}} = 2.450\text{ N} + 0.012\text{ N} = 2.46\text{ N}.

Final answer

(a) T=2.54 sT = 2.54\text{ s}; (b) vmax=0.276 m/sv_{\text{max}} = 0.276\text{ m/s}; (c) FT=2.46 NF_T = 2.46\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the explicit unit factor ×π rad180∘\times \frac{\pi\text{ rad}}{180^\circ} right next to any given degree measure before doing algebra.

  • Practice estimating the vertical drop h=L(1−cos⁡θ)h = L(1 - \cos\theta) as an independent sanity check on speed via v=2ghv = \sqrt{2gh}.

OverviewACEpath Teacher's Diagnosis

02 The student neglects the centripetal acceleration at the bottom of the swing and assumes the tension simply balances gravity.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    T=2πLg=2π1.609.80  ⟹  T=2.54 sT = 2\pi \sqrt{\frac{L}{g}} = 2\pi \sqrt{\frac{1.60}{9.80}} \implies T = 2.54\text{ s}

  2. Step 2

    vmax=2gL(1−cos⁡θ0)=2×9.80×1.60×(1−cos⁡4.00∘)  ⟹  vmax=0.276 m/sv_{\text{max}} = \sqrt{2gL(1 - \cos\theta_0)} = \sqrt{2 \times 9.80 \times 1.60 \times (1 - \cos 4.00^\circ)} \implies v_{\text{max}} = 0.276\text{ m/s}

  3. Step 3

    At equilibrium, vertical forces balance: \text{At equilibrium, vertical forces balance: } F_T = mg   ⟹  \implies F_T = 0.250 ×\times 9.80   ⟹  \implies F_T = 2.45 N\text{ N}

    Correct

    Fnet=FT−mg=mvmax2L  ⟹  FT=mg+mvmax2L=2.450 N+0.012 N≈2.46 NF_{\text{net}} = F_T - mg = \frac{m v_{\text{max}}^2}{L} \implies F_T = mg + \frac{m v_{\text{max}}^2}{L} = 2.450\text{ N} + 0.012\text{ N} \approx 2.46\text{ N}

    Although the bob passes through the vertical equilibrium line, it is moving along a curved circular path of radius LL. Because it has non-zero velocity vmaxv_{\text{max}}, it experiences an upward centripetal acceleration ac=vmax2La_c = \frac{v_{\text{max}}^2}{L}. Therefore, string tension must exceed gravity: FT=mg+mvmax2LF_T = mg + \frac{m v_{\text{max}}^2}{L}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the formula for the period of a simple pendulum.

You correctly related vertical height displacement to angle and applied energy conservation to find the maximum speed.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Neglecting centripetal acceleration at equilibrium

You treated the lowest point as a static equilibrium where net vertical force is zero, setting FT=mgF_T = mg.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating dynamic equilibrium position with static equilibrium. In circular motion, passing through the lowest point means the net tangential force is zero, but the radial net force is non-zero because the velocity is at a maximum and directed along a circular arc.

REASONING PATH
Your ACEpath teacher’s suggested approach
Net Force in Curved Motion
  • Whenever an object follows a circular path of radius RR at speed vv, Newton's second law along the radial direction is Frad, net=mv2RF_{\text{rad, net}} = \frac{m v^2}{R}.

  • Draw a free-body diagram and identify the acceleration direction toward the center of curvature before setting up ∑F=ma\sum F = ma.

Tension at Bottom of Swing
  • At the lowest position of a pendulum, tension points toward the pivot and weight points downward: FT−mg=mv2LF_T - mg = \frac{m v^2}{L}.

  • Add the centripetal term mv2L\frac{m v^2}{L} to the weight mgmg to find the total tension.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the forces acting on the bob at the lowest point: tension FTF_T directed upward toward the pivot and gravity mgmg directed downward.

  2. Write Newton's second law for the radial direction: ∑Fradial=FT−mg=mvmax2L\sum F_{\text{radial}} = F_T - mg = \frac{m v_{\text{max}}^2}{L}.

  3. Solve for tension: FT=mg+mvmax2L=(0.250)(9.80)+(0.250)(0.2764)21.60=2.450+0.0119≈2.46 NF_T = mg + \frac{m v_{\text{max}}^2}{L} = (0.250)(9.80) + \frac{(0.250)(0.2764)^2}{1.60} = 2.450 + 0.0119 \approx 2.46\text{ N}.

Final answer

FT=2.46 NF_T = 2.46\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always check whether an object passing through 'equilibrium' is stationary or moving along a curved path.

  • Practice drawing radial vs. tangential force components for pendulums at arbitrary angles.

OverviewACEpath Teacher's Diagnosis

03 The student inverts the ratio inside the period formula, using √(g/L) instead of √(L/g).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    T=2πgL  ⟹  T=2π9.801.60  ⟹  T=15.5 sT = 2\pi\sqrt{\frac{g}{L}} \implies T = 2\pi\sqrt{\frac{9.80}{1.60}} \implies T = 15.5\text{ s}

    Correct

    T=2πLg=2π1.60 m9.80 m/s2≈2.54 sT = 2\pi\sqrt{\frac{L}{g}} = 2\pi\sqrt{\frac{1.60\text{ m}}{9.80\text{ m/s}^2}} \approx 2.54\text{ s}

    You used g/L\sqrt{g/L} instead of L/g\sqrt{L/g}. The expression g/L\sqrt{g/L} represents angular frequency ω\omega, whereas the period T=2πω=2πLgT = \frac{2\pi}{\omega} = 2\pi\sqrt{\frac{L}{g}}.

  2. Step 2

    vmax=2gL(1−cos⁡θ0)  ⟹  vmax=2×9.80×1.60×(1−cos⁡4.00∘)  ⟹  vmax=0.276 m/sv_{\text{max}} = \sqrt{2gL(1 - \cos\theta_0)} \implies v_{\text{max}} = \sqrt{2 \times 9.80 \times 1.60 \times (1 - \cos 4.00^\circ)} \implies v_{\text{max}} = 0.276\text{ m/s}

  3. Step 3

    FT=mg+m(vmax)2L  ⟹  FT=0.250×9.80+0.250×(0.276)21.60  ⟹  FT=2.46 NF_T = mg + \frac{m(v_{\text{max}})^2}{L} \implies F_T = 0.250 \times 9.80 + 0.250 \times \frac{(0.276)^2}{1.60} \implies F_T = 2.46\text{ N}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied conservation of energy to determine the maximum speed at the bottom of the swing.

You properly identified and summed the forces acting on the bob at the lowest point, including centripetal acceleration.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted ratio in period formula

You inverted the ratio inside the square root of the period formula, using g/L\sqrt{g/L} rather than L/g\sqrt{L/g}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You likely confused the period T=2πL/gT = 2\pi\sqrt{L/g} with the angular frequency ω=g/L\omega = \sqrt{g/L}. Checking units is an effective safeguard: L/g\sqrt{L/g} yields units of m/(m/s2)=s\sqrt{\text{m}/(\text{m/s}^2)} = \text{s}, which matches time, whereas g/L\sqrt{g/L} yields s−1\text{s}^{-1}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Period vs. Angular Frequency
  • For a simple pendulum, ω=gL\omega = \sqrt{\frac{g}{L}} and T=2πω=2πLgT = \frac{2\pi}{\omega} = 2\pi\sqrt{\frac{L}{g}}.

  • Ensure length LL is in the numerator when calculating time period TT.

Dimensional Verification
  • Period TT must have units of seconds (s\text{s}).

  • Perform a unit check: [L/g]=m/(m/s2)=s2[L/g] = \text{m} / (\text{m}/\text{s}^2) = \text{s}^2, so L/g\sqrt{L/g} has units of seconds.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the period formula: T=2πLgT = 2\pi\sqrt{\frac{L}{g}}.

  2. Substitute the given parameters: T=2π1.60 m9.80 m/s2T = 2\pi\sqrt{\frac{1.60\text{ m}}{9.80\text{ m/s}^2}}.

  3. Evaluate the numerical result: T=2π0.1633≈2.54 sT = 2\pi\sqrt{0.1633} \approx 2.54\text{ s}.

Final answer

(a) T=2.54 sT = 2.54\text{ s}; (b) vmax=0.276 m/sv_{\text{max}} = 0.276\text{ m/s}; (c) FT=2.46 NF_T = 2.46\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice checking dimensions whenever working with square-root formulas in oscillations.

  • Remember that longer pendulums swing more slowly (larger TT), so LL must be in the numerator of the period equation.

Lock it in

Similar question

01

A simple pendulum of length L=0.900 mL = 0.900\text{ m} swings with an angular amplitude of θ0=5.00∘\theta_0 = 5.00^\circ in a region where g=9.80 m/s2g = 9.80\text{ m/s}^2. What is the linear arc amplitude smaxs_{\text{max}} and the maximum speed vmaxv_{\text{max}} of the bob?

Answer

smax=0.0785 ms_{\text{max}} = 0.0785\text{ m}, vmax=0.259 m/sv_{\text{max}} = 0.259\text{ m/s}. Key steps: Convert angle to radians θ0=5.00∘×π180∘=0.08727 rad\theta_0 = 5.00^\circ \times \frac{\pi}{180^\circ} = 0.08727\text{ rad}. Then smax=Lθ0=(0.900)(0.08727)=0.0785 ms_{\text{max}} = L\theta_0 = (0.900)(0.08727) = 0.0785\text{ m}. With ω=g/L=9.80/0.900≈3.300 rad/s\omega = \sqrt{g/L} = \sqrt{9.80/0.900} \approx 3.300\text{ rad/s}, vmax=ωsmax=(3.300)(0.0785)≈0.259 m/sv_{\text{max}} = \omega s_{\text{max}} = (3.300)(0.0785) \approx 0.259\text{ m/s}.

02

A pendulum with mass m=0.400 kgm = 0.400\text{ kg} and length L=2.50 mL = 2.50\text{ m} is released from rest at θ0=6.00∘\theta_0 = 6.00^\circ. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, find the maximum kinetic energy KmaxK_{\text{max}} of the bob and the tension FTF_T in the string at the lowest point.

Answer

Kmax=0.0214 JK_{\text{max}} = 0.0214\text{ J}, FT=3.94 NF_T = 3.94\text{ N}. Key steps: θ0=6.00×π180=0.1047 rad\theta_0 = 6.00 \times \frac{\pi}{180} = 0.1047\text{ rad}. Maximum speed is vmax=gLθ0=(9.80)(2.50)(0.1047)=0.5183 m/sv_{\text{max}} = \sqrt{gL}\theta_0 = \sqrt{(9.80)(2.50)}(0.1047) = 0.5183\text{ m/s}. Thus Kmax=12mvmax2=12(0.400)(0.5183)2≈0.0214 JK_{\text{max}} = \frac{1}{2}m v_{\text{max}}^2 = \frac{1}{2}(0.400)(0.5183)^2 \approx 0.0214\text{ J}. String tension at bottom is FT=mg+mvmax2L=(0.400)(9.80)+2(0.0214)2.50=3.920+0.017≈3.94 NF_T = mg + \frac{m v_{\text{max}}^2}{L} = (0.400)(9.80) + \frac{2(0.0214)}{2.50} = 3.920 + 0.017 \approx 3.94\text{ N}.

03

A clockmaker designs a simple pendulum of mass m=0.150 kgm = 0.150\text{ kg} to have a maximum speed of vmax=0.120 m/sv_{\text{max}} = 0.120\text{ m/s} when released from θ0=3.50∘\theta_0 = 3.50^\circ. What must be the length LL of the pendulum string? (Use g=9.80 m/s2g = 9.80\text{ m/s}^2.)

Answer

L≈0.395 mL \approx 0.395\text{ m}. Key steps: Convert angle to radians: θ0=3.50∘×π180∘≈0.06109 rad\theta_0 = 3.50^\circ \times \frac{\pi}{180^\circ} \approx 0.06109\text{ rad}. Using vmax=gL θ0v_{\text{max}} = \sqrt{gL}\,\theta_0, solve for LL: L=vmaxg θ0=0.1209.80×0.06109=0.1200.19125≈0.6274\sqrt{L} = \frac{v_{\text{max}}}{\sqrt{g}\,\theta_0} = \frac{0.120}{\sqrt{9.80} \times 0.06109} = \frac{0.120}{0.19125} \approx 0.6274. Squaring gives L=(0.6274)2≈0.394 mL = (0.6274)^2 \approx 0.394\text{ m} (or 0.395 m0.395\text{ m} with unrounded intermediates).

Loading workspace…