Resources
A thermally insulated, rigid container is divided into two equal compartments of volume each by a thin membrane. One compartment contains of an ideal gas at , while the second compartment is completely evacuated. The membrane suddenly ruptures, allowing the gas to undergo a free expansion into the vacuum to occupy the total volume of . (a) Determine the work done by the gas , the heat exchanged , and the change in internal energy for this unrestrained free expansion. (b) For comparison at this expansion boundary, calculate the work and heat that would be required if the same gas had instead expanded reversibly and isothermally at between the exact same initial and final volumes ().
Answer and steps
Final answer
(a) , , ; (b) , .
Steps
Part (a): Free Expansion into a Vacuum
- Evaluate Heat Exchanged ():
The container is specified as thermally insulated, meaning there is no heat flow between the gas and its surroundings: - Evaluate Work Done ():
Work done by an expanding gas against an external pressure is given by: Because the gas expands into a vacuum (an evacuated compartment), the opposing external pressure is zero (). Consequently, the gas does no mechanical work on its surroundings: - Determine the Change in Internal Energy ():
Applying the First Law of Thermodynamics, :
Key Pitfall: Do not use the ideal gas pressure to compute the work of free expansion. Work depends on the external force or pressure opposing the moving boundary, not the internal pressure of the gas.
Part (b): Reversible Isothermal Expansion
-
Calculate the Work Done ():
For a reversible expansion, the gas pressure is balanced with the external pressure at every stage (). For an isothermal process at constant temperature :Substitute the given values:
-
Calculate the Heat Exchanged ():
The internal energy of an ideal gas depends solely on its temperature. Since the process is isothermal, , which gives:Using the First Law of Thermodynamics:
Typical errors
01 The student confuses free expansion into a vacuum with reversible expansion and incorrectly calculates work using the reversible isothermal formula for the free expansion.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
because the container is insulated.
- Step 2Correct
Thermodynamic work is done against an opposing external pressure (). Because the gas expands freely into an evacuated chamber, , so no mechanical work is performed.
- Step 3Correct
You applied the First Law of Thermodynamics correctly, but the result was affected by using the incorrect non-zero value for .
- Step 4
- Step 5
WHAT YOU DID WELL
Compliments from Your TeacherYou recognized that thermal insulation means .
You correctly used the First Law of Thermodynamics, .
You accurately calculated reversible isothermal work and heat in part (b).
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakenone
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the unrestrained free expansion as if it were performing work against a quasistatic resisting pressure equal to internal gas pressure, rather than recognizing that expansion into a vacuum has .
REASONING PATH
Your ACEpath teacher’s suggested approach- Expansion against vacuum ($P_{\text{ext}} = 0$)
Thermodynamic boundary work is calculated from external pressure: . When expanding into a vacuum, , which implies .
Check whether the boundary moves against a force or into empty space before selecting a work formula.
CORRECTED PATH
ACEpath Teacher's DemonstrationSet for expansion into an evacuated space.
Evaluate work: .
Apply the First Law: .
(a) , , ; (b) , .
02 The student uses common logarithm (base 10) instead of the natural logarithm (ln) when evaluating the reversible isothermal work formula.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
The integral of with respect to evaluates to the natural logarithm (base ), not the common logarithm (base 10). Using yields .
- Step 3Correct
Your thermodynamic reasoning that and for an isothermal ideal gas expansion is correct, but your numerical value is affected by the logarithm error in the previous step.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that adiabatic insulation implies .
You recognized that expanding against a vacuum () performs zero work.
You properly applied the First Law of Thermodynamics to both processes.
You correctly related heat and work in an isothermal expansion of an ideal gas using .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou evaluated instead of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating the calculus antiderivative with the common logarithm base 10 (). In thermodynamic work integrals derived from calculus, logarithmic volume ratios always use the natural logarithm base .
REASONING PATH
Your ACEpath teacher’s suggested approach- Calculus Foundation of Reversible Work
Whenever integrating , use (natural log, base ), never .
CORRECTED PATH
ACEpath Teacher's Demonstration(a) , , ; (b) ,
03 The student misinterprets the isothermal condition in subquestion (b) as adiabatic or assumes zero heat exchange, setting Q_rev = 0 J and concluding ΔU_rev = -W_rev.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Thermally insulated container gives . ⟹ Expansion into vacuum gives . ⟹ .
- Step 2
- Step 3
The container is insulated so ⟹
Correct(since for an ideal gas) ⟹
In part (b), the prompt specifies an isothermal process at , not an insulated (adiabatic) one. Because internal energy of an ideal gas depends only on temperature, , so maintaining constant temperature while doing work requires absorbing heat from a reservoir: .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that expansion into a vacuum does zero work.
You applied the First Law of Thermodynamics accurately in part (a).
You correctly evaluated the reversible isothermal work formula .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou carried the thermally insulated condition from the initial setup of part (a) into the hypothetical isothermal process in part (b).
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the constraints of an isothermal process with an adiabatic process: an expanding ideal gas at constant temperature must absorb heat () to prevent its temperature from dropping.
REASONING PATH
Your ACEpath teacher’s suggested approach- Check the Process Type
For an ideal gas undergoing an isothermal process, , which guarantees .
Always set first for an isothermal ideal gas, then use via the First Law.
- Insulated vs. Isothermal
A thermally insulated process implies (adiabatic), whereas maintaining constant temperature during an expansion requires thermal contact with a heat reservoir.
Do not enforce when a problem specifically asks for an alternative isothermal process.
CORRECTED PATH
ACEpath Teacher's DemonstrationRecognize that for an ideal gas, internal energy depends solely on temperature: .
Because the expansion in part (b) is explicitly held isothermal at , , which means .
Apply the First Law of Thermodynamics: .
,
Lock it in
What is the boundary work done by an ideal gas during free expansion (unrestrained expansion into a vacuum)?
. Work is defined by , and expanding into a vacuum means .
Similar question
A rigid, thermally insulated box is split into two halves. One half holds of helium gas at , and the other half is a vacuum. The divider is removed and the gas fills the entire box. Determine the change in temperature , the work done , and the heat exchanged .
Answer
, , . Because the box is insulated, . Since expansion is into a vacuum (), . By the First Law, . For an ideal gas, , which yields .
A cylinder fitted with a frictionless piston contains of an ideal gas at and an initial volume of . The gas expands isothermally at to against a constant external pressure of . Calculate the work done by the gas and compare it to the reversible isothermal work between the same states.
Answer
and . For constant external pressure: . For reversible isothermal expansion: .
An ideal gas undergoes free expansion from to in an adiabatic chamber. It is then compressed reversibly and isothermally back to its initial volume . Find the net work and net heat for the complete two-step cycle in terms of .
Answer
and . Step 1 (free expansion): , , so and remains unchanged. Step 2 (reversible isothermal compression): , and , so . Summing gives and .