Resources
A wooden crate of mass is sliding down a fixed ramp inclined at an angle of above the horizontal. An instrumentation sensor records that the magnitude of the net force acting along the inclined surface (parallel to the ramp, pointing down-slope) is exactly . Set up the free-body diagram equations along the axes parallel and perpendicular to the incline with . Using this dynamic snapshot, work backward to determine: (a) the magnitude of the normal force exerted by the ramp, (b) the magnitude of the kinetic friction force , and (c) the coefficient of kinetic friction between the crate and the ramp.
Answer and steps
Final answer
(a) ; (b) ; (c) .
Steps
Set Up the Coordinate System and Free-Body Diagram
To analyze the motion on an inclined plane, choose a tilted Cartesian coordinate system aligned with the ramp:
- Let the -axis point down along the incline (in the direction of sliding).
- Let the -axis point perpendicular to and away from the inclined surface.
Three distinct forces act on the crate of mass :
- Gravity (), acting vertically downward with magnitude:
Resolving along the chosen axes:
- Perpendicular component: (directed in the direction)
- Parallel component: (directed in the direction)
- Normal force (), exerted perpendicularly outward by the ramp in the direction.
- Kinetic friction force (), opposing the downward sliding motion and directed up the incline in the direction.
Determine the Normal Force (Part a)
Because the crate stays in contact with the ramp without lifting off or breaking through, there is no acceleration perpendicular to the incline ():
Substitute the given values:
Determine the Kinetic Friction Force (Part b)
Apply Newton's second law along the parallel axis ( directed down the ramp):
Rearranging to solve for the friction force :
Calculate the downhill component of gravity:
Now subtract the measured net parallel force:
(Common Pitfall: Do not confuse the net parallel force with the friction force . The net force is the resultant of the downhill gravity component and the opposing uphill friction force.)
Determine the Coefficient of Kinetic Friction (Part c)
The model for kinetic friction is related to the normal force by:
Solving for the coefficient of kinetic friction :
Substitute the values found in parts (a) and (b):
Typical errors
01 The student swaps the sine and cosine trigonometric projections for the inclined plane components.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Along the axis perpendicular to the ramp (-axis), the angle between gravity and the normal axis is . Therefore, the perpendicular component of gravity is adjacent to the angle , giving , which balances .
- Step 2Correct
The component of gravity pulling the crate down along the slope is opposite the angle in the force-resolution right triangle, so it is , not .
- Step 3Correct
You correctly applied the relationship , but your calculated value was affected by the swapped trigonometric components from parts (a) and (b).
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that the normal force balances the perpendicular component of gravity because there is no perpendicular acceleration.
You correctly applied Newton's second law along the incline to express friction in terms of the downhill gravitational component and the net parallel force.
You correctly set up the definition of the coefficient of kinetic friction as .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou inverted the sine and cosine functions when projecting the weight vector onto the tilted coordinate axes.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisWhen setting up coordinates on an incline of angle measured from the horizontal, the angle between the downward vertical weight vector and the perpendicular-to-ramp axis is equal to . Consequently, the perpendicular component is adjacent to (), and the parallel downhill component is opposite to ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Identify the reference angle in the gravity triangle
For a ramp inclined at angle above the horizontal, the angle between (straight down) and the normal axis (perpendicular to the incline) is exactly .
Always draw the right triangle formed by and its components, and verify that the perpendicular component is adjacent to .
- Sanity-check extreme angles
If the incline angle (flat ground), the downhill force must vanish () and the normal force must equal full weight ().
Substitute into your component formulas as a quick mental check: parallel must use , and perpendicular must use .
CORRECTED PATH
ACEpath Teacher's DemonstrationSet up perpendicular equilibrium: .
Apply Newton's second law down the ramp: .
Compute the coefficient of kinetic friction: .
(a) ; (b) ; (c)
02 The student assumes the normal force on an incline is simply equal to the full weight m * g.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You set the normal force equal to the total weight . On an incline tilted at an angle , the surface supports only the perpendicular component of gravity, .
- Step 2
- Step 3Correct
Your relationship is correct, but your final value was affected by substituting the incorrect normal force from part (a).
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly resolved the component of gravity parallel to the incline as .
You accurately related the net parallel force to the downhill gravity component and uphill friction.
You correctly used the definition of the coefficient of kinetic friction, .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou equated to instead of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the normal force as an automatic constant equal to rather than setting up equilibrium along the axis perpendicular to the tilted surface ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Perpendicular Equilibrium
On a ramp of inclination with no additional perpendicular forces, .
Always establish a tilted coordinate system and balance forces along the normal axis before writing an expression for .
CORRECTED PATH
ACEpath Teacher's DemonstrationRecalculate the normal force: .
Substitute the corrected normal force into the friction formula: .
(a) , (b) , (c)
03 The student adds rather than subtracts the friction force in the parallel force balance equation.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Because the crate is sliding down the incline, kinetic friction acts up the incline to oppose the motion. Therefore, the net parallel force pointing downhill is , not .
- Step 3Correct
You correctly applied the definition of the coefficient of kinetic friction, but your numerical result was affected by the incorrect value of from the previous step.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly resolved gravity perpendicular to the incline to find the normal force .
You correctly recalled the relationship between kinetic friction and the normal force, .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou treated friction as acting down the ramp in the same direction as the downhill component of gravity, rather than opposing the sliding motion.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisMisidentifying the direction of kinetic friction in the free-body diagram. Kinetic friction always opposes relative motion between contacting surfaces. When an object slides down a ramp, friction points up the ramp, meaning it must have a negative sign when defining the downhill direction as positive.
REASONING PATH
Your ACEpath teacher’s suggested approach- Identify Motion and Friction Direction
Kinetic friction always points opposite to the direction of sliding velocity along the surface.
Draw a velocity vector down the ramp first, then draw pointing directly up the incline.
- Set Up the Net Force Equation Along the Incline
Taking downhill as positive, the downhill gravity component is positive () and friction is negative ().
Write before substituting numerical values.
CORRECTED PATH
ACEpath Teacher's DemonstrationSet up Newton's second law along the incline with the downhill direction as positive: .
Solve for the friction force: .
Calculate the coefficient of kinetic friction: .
(a) ; (b) ; (c)
Lock it in
On a surface inclined at angle above the horizontal, which trigonometric component of gravity acts perpendicular to the surface?
. The perpendicular axis is adjacent to the angle between the downward vertical and the normal axis.
Similar question
A block of mass sits on a frictionless ramp inclined at above the horizontal. Calculate the magnitude of the normal force and the acceleration of the block down the ramp ().
Answer
Normal force: . Acceleration: .
A trunk is pulled up a incline at constant speed by a rope parallel to the ramp. If the coefficient of kinetic friction is , find the magnitude of the normal force , the kinetic friction force , and the tension in the rope ().
Answer
. Friction: . Since speed is constant, .
A skier of mass glides down a slope. A headwind exerts a resistive aerodynamic force directed up along the slope. If the skier accelerates down the slope at , find the normal force and the coefficient of kinetic friction ().
Answer
. Along the slope: . Then .