Resources

A mechanical catapult consists of a class-3 lever pivoted at one end (the fulcrum). An internal hydraulic cylinder exerts an upward effort force perpendicular to the arm at a distance of dE=0.400 md_E = 0.400\text{ m} from the pivot. The payload bucket is located at the free end at a distance of dL=2.40 md_L = 2.40\text{ m} from the pivot and holds a stone of mass m=15.0 kgm = 15.0\text{ kg}. The lever arm is initially horizontal and is rotated upward through an angle of θ=30.0∘\theta = 30.0^\circ while the hydraulic cylinder exerts a constant perpendicular force of Feffort=1600 NF_{\text{effort}} = 1600\text{ N}. Neglecting the arm's mass and friction, and using g=9.80 m/s2g = 9.80\text{ m/s}^2: (a) calculate the total work done by the hydraulic effort force during this angular displacement, and (b) using the work-energy theorem, determine the launch speed vv of the stone at the instant the arm reaches θ=30.0∘\theta = 30.0^\circ.

Answer and steps

Final answer

(a) Weffort=335 JW_{\text{effort}} = 335\text{ J}; (b) v=4.59 m/sv = 4.59\text{ m/s}

Steps

Part (a): Work Done by the Hydraulic Effort Force

  1. Convert the angular displacement to radians: The arm rotates upward through an angle of: θ=30.0∘=30.0∘×π180∘=π6 rad≈0.5236 rad\theta = 30.0^\circ = 30.0^\circ \times \frac{\pi}{180^\circ} = \frac{\pi}{6}\text{ rad} \approx 0.5236\text{ rad}
  2. Calculate the torque exerted by the effort force: Because the hydraulic cylinder exerts a force that remains perpendicular to the arm at a fixed distance dE=0.400 md_E = 0.400\text{ m} from the fulcrum, the torque τeffort\tau_{\text{effort}} is constant throughout the rotation: τeffort=Feffort⋅dE=1600 N⋅0.400 m=640 N⋅m\tau_{\text{effort}} = F_{\text{effort}} \cdot d_E = 1600\text{ N} \cdot 0.400\text{ m} = 640\text{ N}\cdot\text{m}
  3. Compute the rotational work done: The work done by a constant torque through an angular displacement θ\theta is: Weffort=τeffort⋅θ=640 N⋅m⋅π6 rad≈335.1 JW_{\text{effort}} = \tau_{\text{effort}} \cdot \theta = 640\text{ N}\cdot\text{m} \cdot \frac{\pi}{6}\text{ rad} \approx 335.1\text{ J}

    Rounding to three significant figures gives: Weffort=335 JW_{\text{effort}} = 335\text{ J}


Part (b): Launch Speed of the Stone Using the Work-Energy Theorem

  1. Calculate the vertical height gained by the stone: Starting from the horizontal position, the payload bucket moves along an arc of radius dL=2.40 md_L = 2.40\text{ m}. At an angle θ=30.0∘\theta = 30.0^\circ, its vertical displacement hh is: h=dLsin⁡θ=2.40 m⋅sin⁡(30.0∘)=2.40 m⋅0.500=1.20 mh = d_L \sin\theta = 2.40\text{ m} \cdot \sin(30.0^\circ) = 2.40\text{ m} \cdot 0.500 = 1.20\text{ m}
  2. Determine the work done against gravity: The downward gravitational force does negative work as the stone rises: Wg=−mgh=−(15.0 kg)(9.80 m/s2)(1.20 m)=−176.4 JW_g = -mgh = -(15.0\text{ kg})(9.80\text{ m/s}^2)(1.20\text{ m}) = -176.4\text{ J}
  3. Apply the work-energy theorem: The net work done on the system equals the change in kinetic energy ΔK\Delta K. Since the stone starts from rest (Ki=0K_i = 0): Wnet=Weffort+Wg=ΔKW_{\text{net}} = W_{\text{effort}} + W_g = \Delta K Wnet=335.1 J−176.4 J≈158.7 JW_{\text{net}} = 335.1\text{ J} - 176.4\text{ J} \approx 158.7\text{ J}

    (Note: Retaining intermediate rounded values gives 335 J−177 J≈158 J335\text{ J} - 177\text{ J} \approx 158\text{ J}.)

  4. Solve for the tangential speed vv: 12mv2=Wnet\frac{1}{2} m v^2 = W_{\text{net}} v=2Wnetm=2⋅158 J15.0 kg=21.07 m2/s2≈4.59 m/sv = \sqrt{\frac{2 W_{\text{net}}}{m}} = \sqrt{\frac{2 \cdot 158\text{ J}}{15.0\text{ kg}}} = \sqrt{21.07\text{ m}^2/\text{s}^2} \approx 4.59\text{ m/s}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student uses degrees instead of radians when computing the arc length displacement for the work done by the effort force.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    sE=dE⋅θ  ⟹  sE=0.400 m⋅30.0=12.0 m  ⟹  Weffort=Feffort⋅sE=1600 N⋅12.0 m=19200 Js_E = d_E \cdot \theta \implies s_E = 0.400\text{ m} \cdot 30.0 = 12.0\text{ m} \implies W_{\text{effort}} = F_{\text{effort}} \cdot s_E = 1600\text{ N} \cdot 12.0\text{ m} = 19200\text{ J}

    Correct

    sE=dE⋅θ=0.400 m⋅(30.0∘×π180∘)≈0.2094 m  ⟹  Weffort=Feffort⋅sE=1600 N⋅0.2094 m≈335 Js_E = d_E \cdot \theta = 0.400\text{ m} \cdot \left(30.0^\circ \times \frac{\pi}{180^\circ}\right) \approx 0.2094\text{ m} \implies W_{\text{effort}} = F_{\text{effort}} \cdot s_E = 1600\text{ N} \cdot 0.2094\text{ m} \approx 335\text{ J}

    The arc length formula s=rθs = r\theta and rotational work formula W=τθW = \tau\theta require the angle θ\theta to be in radians. Multiplying by 30.0∘30.0^\circ directly overestimates the displacement by a factor of 180π≈57.3\frac{180}{\pi} \approx 57.3.

  2. Step 2

    h=dL⋅sin⁡(30.0∘)=2.40 m⋅0.5=1.20 m  ⟹  Wgrav=−m⋅g⋅h=−15.0 kg⋅9.80 m/s2⋅1.20 m=−176.4 Jh = d_L \cdot \sin(30.0^\circ) = 2.40\text{ m} \cdot 0.5 = 1.20\text{ m} \implies W_{\text{grav}} = -m \cdot g \cdot h = -15.0\text{ kg} \cdot 9.80\text{ m/s}^2 \cdot 1.20\text{ m} = -176.4\text{ J}

  3. Step 3

    Wnet=19200 J−176.4 J=19023.6 J  ⟹  12mv2=Wnet  ⟹  v2=2⋅19023.615.0=2536.48 m2/s2  ⟹  v=50.4 m/sW_{\text{net}} = 19200\text{ J} - 176.4\text{ J} = 19023.6\text{ J} \implies \frac{1}{2}mv^2 = W_{\text{net}} \implies v^2 = \frac{2 \cdot 19023.6}{15.0} = 2536.48\text{ m}^2/\text{s}^2 \implies v = 50.4\text{ m/s}

    Correct

    Wnet=335.1 J−176.4 J=158.7 J  ⟹  v=2Wnetm=2(158.7 J)15.0 kg≈4.59 m/sW_{\text{net}} = 335.1\text{ J} - 176.4\text{ J} = 158.7\text{ J} \implies v = \sqrt{\frac{2 W_{\text{net}}}{m}} = \sqrt{\frac{2(158.7\text{ J})}{15.0\text{ kg}}} \approx 4.59\text{ m/s}

    Your application of the work-energy theorem ΔK=Wnet\Delta K = W_{\text{net}} and your algebra were completely sound, but the final speed inherited the incorrect work value from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the vertical rise of the payload depends on sin⁡θ\sin\theta.

You correctly calculated the work done against gravity.

You correctly formulated the work-energy theorem 12mv2=Wnet\frac{1}{2}mv^2 = W_{\text{net}} to solve for the final speed.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Degree-Radian Conversion Omission

You used θ=30.0\theta = 30.0 as a dimensionless pure number instead of converting 30.0∘30.0^\circ into radians ( π6 rad )\,\frac{\pi}{6}\text{ rad}\,) when computing the arc length displacement.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

The formula s=rθs = r\theta is derived from the definition of a radian (arc length divided by radius). Degrees are an arbitrary unit of angle (360∘360^\circ per revolution), so using degrees directly makes the arc length roughly 57 times too large.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Angle Units in Kinematics and Work Formulas
  • Any physics formula relating linear and angular quantities (s=rθs = r\theta, v=rωv = r\omega, W=τθW = \tau\theta) is valid only when θ\theta is expressed in radians.

  • Whenever you see an angle given in degrees in rotational motion or arc displacement problems, convert it immediately to radians via θrad=θdeg×π180∘\theta_{\text{rad}} = \theta_{\text{deg}} \times \frac{\pi}{180^\circ} before computing distances or work.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert θ=30.0∘\theta = 30.0^\circ to radians: θ=30.0∘×π180∘=π6 rad≈0.5236 rad\theta = 30.0^\circ \times \frac{\pi}{180^\circ} = \frac{\pi}{6}\text{ rad} \approx 0.5236\text{ rad}.

  2. Compute the displacement of the effort force: sE=dEθ=0.400 m×0.5236 rad≈0.2094 ms_E = d_E \theta = 0.400\text{ m} \times 0.5236\text{ rad} \approx 0.2094\text{ m}.

  3. Calculate the effort work: Weffort=FeffortsE=1600 N×0.2094 m≈335.1 JW_{\text{effort}} = F_{\text{effort}} s_E = 1600\text{ N} \times 0.2094\text{ m} \approx 335.1\text{ J}.

  4. Compute net work: Wnet=335.1 J−176.4 J=158.7 JW_{\text{net}} = 335.1\text{ J} - 176.4\text{ J} = 158.7\text{ J}.

  5. Solve for speed: v=2(158.7 J)15.0 kg≈4.59 m/sv = \sqrt{\frac{2(158.7\text{ J})}{15.0\text{ kg}}} \approx 4.59\text{ m/s}.

Final answer

(a) Weffort=335 JW_{\text{effort}} = 335\text{ J}; (b) v=4.59 m/sv = 4.59\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting angle measures immediately to radians as Step 0 of any rotation problem.

  • Perform a quick sanity check on physical dimensions: a lever arm of 0.4 m0.4\text{ m} sweeping 30∘30^\circ cannot travel 12 m12\text{ m}, as the full perimeter of a circle of radius 0.4 m0.4\text{ m} is only ≈2.51 m\approx 2.51\text{ m}.

OverviewACEpath Teacher's Diagnosis

02 The student neglects the negative work done by gravity on the stone during its ascent when applying the work-energy theorem.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    θ=30.0∘⋅π180∘=π6 rad≈0.5236 rad  ⟹  sE=dE⋅θ=0.400 m⋅0.5236 rad=0.2094 m  ⟹  Weffort=1600 N⋅0.2094 m=335.1 J\theta = 30.0^\circ \cdot \frac{\pi}{180^\circ} = \frac{\pi}{6}\text{ rad} \approx 0.5236\text{ rad} \implies s_E = d_E \cdot \theta = 0.400\text{ m} \cdot 0.5236\text{ rad} = 0.2094\text{ m} \implies W_{\text{effort}} = 1600\text{ N} \cdot 0.2094\text{ m} = 335.1\text{ J}

  2. Step 2

    Wnet=Weffort=335.1 JW_{\text{net}} = W_{\text{effort}} = 335.1\text{ J}

    Correct

    Wnet=Weffort+Wg=Weffort−mgh=335.1 J−(15.0 kg)(9.80 m/s2)(2.40 m⋅sin⁡30.0∘)=335.1 J−176.4 J=158.7 JW_{\text{net}} = W_{\text{effort}} + W_g = W_{\text{effort}} - mgh = 335.1\text{ J} - (15.0\text{ kg})(9.80\text{ m/s}^2)(2.40\text{ m} \cdot \sin 30.0^\circ) = 335.1\text{ J} - 176.4\text{ J} = 158.7\text{ J}

    You equated the net work solely to the work done by the effort force. As the stone ascends, gravity exerts a downward force and does negative work (Wg=−mghW_g = -mgh), which reduces the net work available to increase kinetic energy.

  3. Step 3

    (12)⋅m⋅v2=335.1 J  ⟹  v2=2⋅335.1 J15.0 kg=44.68 m2/s2  ⟹  v=6.68 m/s\left(\frac{1}{2}\right) \cdot m \cdot v^2 = 335.1\text{ J} \implies v^2 = \frac{2 \cdot 335.1\text{ J}}{15.0\text{ kg}} = 44.68\text{ m}^2/\text{s}^2 \implies v = 6.68\text{ m/s}

    Correct

    v=2Wnetm=2(158.7 J)15.0 kg≈4.59 m/sv = \sqrt{\frac{2 W_{\text{net}}}{m}} = \sqrt{\frac{2(158.7\text{ J})}{15.0\text{ kg}}} \approx 4.59\text{ m/s}

    Your algebraic setup for the kinetic energy is correct, but the final velocity is too high because it was computed using the uncorrected net work.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately converted the rotational angle of 30.0∘30.0^\circ into radians.

You correctly calculated the displacement arc length and the resulting work done by the hydraulic cylinder.

You properly applied the kinetic energy formula 12mv2\frac{1}{2}mv^2 to solve for velocity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Gravitational Work in Work-Energy Balance

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the input work as being entirely converted into kinetic energy, overlooking that the payload gains gravitational potential energy as it is lifted.

REASONING PATH
Your ACEpath teacher’s suggested approach
Account for All External Forces
  • The net work on a system equals the algebraic sum of work done by all acting forces: Wnet=∑Wi=Weffort+WgW_{\text{net}} = \sum W_i = W_{\text{effort}} + W_g.

  • Always identify every force acting on the object during motion, especially gravity whenever the elevation changes.

Calculate Vertical Rise for Rotational Arms
  • For a lever rotating through an angle θ\theta from the horizontal, the vertical height gained is h=Lsin⁡θh = L \sin\theta.

  • Multiply the payload distance from the fulcrum by the sine of the angle to find the vertical displacement before computing Wg=−mghW_g = -mgh.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute the vertical height gained by the stone: h=dLsin⁡30.0∘=2.40 m⋅0.500=1.20 mh = d_L \sin 30.0^\circ = 2.40\text{ m} \cdot 0.500 = 1.20\text{ m}.

  2. Compute the work done by gravity: Wg=−mgh=−(15.0 kg)(9.80 m/s2)(1.20 m)=−176.4 JW_g = -mgh = -(15.0\text{ kg})(9.80\text{ m/s}^2)(1.20\text{ m}) = -176.4\text{ J}.

  3. Find the true net work: Wnet=Weffort+Wg=335.1 J−176.4 J=158.7 JW_{\text{net}} = W_{\text{effort}} + W_g = 335.1\text{ J} - 176.4\text{ J} = 158.7\text{ J}.

  4. Solve for the launch speed: v=2Wnetm=2(158.7 J)15.0 kg≈4.59 m/sv = \sqrt{\frac{2 W_{\text{net}}}{m}} = \sqrt{\frac{2(158.7\text{ J})}{15.0\text{ kg}}} \approx 4.59\text{ m/s}.

Final answer

(a) Weffort=335 JW_{\text{effort}} = 335\text{ J}; (b) v=4.59 m/sv = 4.59\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw a free-body diagram showing both the applied upward force and downward gravity whenever an object moves vertically.

  • Write out Wnet=ΔKW_{\text{net}} = \Delta K explicitly by listing Weffort+Wg=Kf−KiW_{\text{effort}} + W_g = K_f - K_i before substituting numerical values.

  • Practice checking whether an alternative approach—such as conservation of energy (Weffort=ΔK+ΔUgW_{\text{effort}} = \Delta K + \Delta U_g)—yields the identical governing equation.

OverviewACEpath Teacher's Diagnosis

03 The student calculates the displacement for work along the vertical component d_E · sin(θ) instead of along the circular arc path followed by the perpendicular force.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    hE=dE⋅sin⁡(30.0∘)=0.400 m⋅0.5=0.200 m  ⟹  Weffort=Feffort⋅hE=1600 N⋅0.200 m=320 Jh_E = d_E \cdot \sin(30.0^\circ) = 0.400\text{ m} \cdot 0.5 = 0.200\text{ m} \implies W_{\text{effort}} = F_{\text{effort}} \cdot h_E = 1600\text{ N} \cdot 0.200\text{ m} = 320\text{ J}

    Correct

    Weffort=τθ=(FeffortdE)θ=(1600 N)(0.400 m)(π6 rad)≈335 JW_{\text{effort}} = \tau \theta = (F_{\text{effort}} d_E)\theta = (1600\text{ N})(0.400\text{ m})\left(\frac{\pi}{6}\text{ rad}\right) \approx 335\text{ J}

    The problem states that the effort force remains perpendicular to the lever arm throughout the rotation. Because the force acts tangentially along a circular arc of radius dEd_E, its displacement is the arc length sE=dEθs_E = d_E \theta (with θ\theta in radians), not the vertical height dEsin⁡θd_E \sin\theta. Alternatively, you can compute work as torque multiplied by angular displacement: W=τθW = \tau \theta.

  2. Step 2

    h=dL⋅sin⁡(30.0∘)=2.40 m⋅0.5=1.20 m  ⟹  Wgrav=−m⋅g⋅h=−15.0 kg⋅9.80 m/s2⋅1.20 m=−176.4 Jh = d_L \cdot \sin(30.0^\circ) = 2.40\text{ m} \cdot 0.5 = 1.20\text{ m} \implies W_{\text{grav}} = -m \cdot g \cdot h = -15.0\text{ kg} \cdot 9.80\text{ m/s}^2 \cdot 1.20\text{ m} = -176.4\text{ J}

  3. Step 3

    Wnet=320 J−176.4 J=143.6 J  ⟹  (12)mv2=Wnet  ⟹  v2=2⋅143.6 J15.0 kg=19.15 m2/s2  ⟹  v=4.38 m/sW_{\text{net}} = 320\text{ J} - 176.4\text{ J} = 143.6\text{ J} \implies \left(\frac{1}{2}\right) m v^2 = W_{\text{net}} \implies v^2 = \frac{2 \cdot 143.6\text{ J}}{15.0\text{ kg}} = 19.15\text{ m}^2/\text{s}^2 \implies v = 4.38\text{ m/s}

    Correct

    Wnet=335.1 J−176.4 J=158.7 J  ⟹  v=2(158.7 J)15.0 kg≈4.59 m/sW_{\text{net}} = 335.1\text{ J} - 176.4\text{ J} = 158.7\text{ J} \implies v = \sqrt{\frac{2(158.7\text{ J})}{15.0\text{ kg}}} \approx 4.59\text{ m/s}

    Your work-energy setup and algebra are completely sound, but your final speed is affected by the value of WeffortW_{\text{effort}} calculated in Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the vertical elevation h=dLsin⁡θh = d_L \sin\theta gained by the stone.

You correctly computed the work done against gravity as Wgrav=−mghW_{\text{grav}} = -mgh.

You correctly set up and solved the work-energy theorem ΔK=Wnet\Delta K = W_{\text{net}} to find the launch speed.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Linear vs. Rotational Work Misconception

Using vertical displacement hE=dEsin⁡θh_E = d_E \sin\theta instead of arc length s=dEθs = d_E \theta or rotational work W=τθW = \tau\theta.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed the effort force acted in a fixed vertical direction like gravity. However, the force is continuously directed perpendicular to the rotating arm, which means it is always parallel to the circular path of its contact point. Therefore, the work must be calculated along the curved arc path s=dEθs = d_E \theta or via constant torque W=τθW = \tau\theta.

REASONING PATH
Your ACEpath teacher’s suggested approach
Direction of Applied Force
  • If a force remains perpendicular to a pivoting lever arm, it acts tangentially along a circular arc at all times.

  • Check whether the applied force has a constant orientation in space (like gravity) or rotates with the lever (remaining tangent to the arc).

Rotational Work Formula
  • For a constant torque τ=F⋅r⊥\tau = F \cdot r_{\perp} acting through an angle θ\theta (in radians), W=τθ=F(rθ)W = \tau \theta = F (r \theta).

  • Convert the angular displacement to radians before computing rotational work: θ=30.0∘×π180∘=π6 rad\theta = 30.0^\circ \times \frac{\pi}{180^\circ} = \frac{\pi}{6}\text{ rad}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the torque exerted by the perpendicular effort force: τ=FeffortdE=(1600 N)(0.400 m)=640 N⋅m\tau = F_{\text{effort}} d_E = (1600\text{ N})(0.400\text{ m}) = 640\text{ N}\cdot\text{m}.

  2. Convert the angle to radians: θ=30.0∘=π6 rad≈0.5236 rad\theta = 30.0^\circ = \frac{\pi}{6}\text{ rad} \approx 0.5236\text{ rad}.

  3. Calculate the rotational work: Weffort=τθ=(640 N⋅m)(π6 rad)≈335.1 JW_{\text{effort}} = \tau \theta = (640\text{ N}\cdot\text{m})\left(\frac{\pi}{6}\text{ rad}\right) \approx 335.1\text{ J}.

  4. Find the net work: Wnet=335.1 J−176.4 J=158.7 JW_{\text{net}} = 335.1\text{ J} - 176.4\text{ J} = 158.7\text{ J}.

  5. Solve for the speed: v=2Wnetm=2(158.7 J)15.0 kg≈4.59 m/sv = \sqrt{\frac{2 W_{\text{net}}}{m}} = \sqrt{\frac{2(158.7\text{ J})}{15.0\text{ kg}}} \approx 4.59\text{ m/s}.

Final answer

(a) Weffort=335 JW_{\text{effort}} = 335\text{ J}; (b) v=4.59 m/sv = 4.59\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between work done by a unidirectional field force (like gravity, W=−mghW = -mgh) and work done by a follower force that stays tangent to an arc (W=Fs=FrθW = F s = F r \theta).

  • Practice converting angular displacements from degrees to radians whenever using rotational kinematics or rotational work equations.

Lock it in

Similar question

01

A torque of τ=50.0 N⋅m\tau = 50.0\text{ N}\cdot\text{m} acts on a flywheel while it rotates through an angle of θ=60.0∘\theta = 60.0^\circ. Calculate the total work done by this torque.

Answer

W=52.4 JW = 52.4\text{ J}. Key steps: Convert angle to radians: θ=60.0∘×π180∘=π3 rad≈1.047 rad\theta = 60.0^\circ \times \frac{\pi}{180^\circ} = \frac{\pi}{3}\text{ rad} \approx 1.047\text{ rad}. Then W=τθ=50.0 N⋅m×1.047 rad≈52.4 JW = \tau\theta = 50.0\text{ N}\cdot\text{m} \times 1.047\text{ rad} \approx 52.4\text{ J}.

02

A light lever pivoted at one end is pushed by a force F=250 NF = 250\text{ N} applied perpendicularly at a distance r=0.600 mr = 0.600\text{ m} from the pivot. The lever swings from horizontal through an angle of 45.0∘45.0^\circ. If a mass of m=4.00 kgm = 4.00\text{ kg} is attached at the tip (L=1.20 mL = 1.20\text{ m} from pivot), find the work done by the force FF and the vertical height gained by the mass.

Answer

WF=118 JW_F = 118\text{ J} and h=0.849 mh = 0.849\text{ m}. Key steps: (1) Angle in radians: θ=45.0∘×π180∘=π4 rad\theta = 45.0^\circ \times \frac{\pi}{180^\circ} = \frac{\pi}{4}\text{ rad}. (2) WF=F(rθ)=250×(0.600×π4)≈117.8 JW_F = F(r\theta) = 250 \times (0.600 \times \frac{\pi}{4}) \approx 117.8\text{ J}. (3) Tip height: h=Lsin⁡(45.0∘)=1.20 m×22≈0.849 mh = L\sin(45.0^\circ) = 1.20\text{ m} \times \frac{\sqrt{2}}{2} \approx 0.849\text{ m}.

03

A uniform catapult arm has a length of 2.00 m2.00\text{ m} and negligible mass. It launches a 5.00 kg5.00\text{ kg} projectile positioned at its tip. A constant upward perpendicular force F=600 NF = 600\text{ N} is applied at a point 0.500 m0.500\text{ m} from the pivot. The arm starts from rest horizontally and releases the projectile at an angle of θ=37.0∘\theta = 37.0^\circ above horizontal. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2 and sin⁡(37.0∘)=0.600\sin(37.0^\circ) = 0.600, find the launch speed of the projectile using the work-energy theorem.

Answer

v=7.37 m/sv = 7.37\text{ m/s}. Key steps: (1) Convert angle: θ=37.0∘×π180∘=0.6458 rad\theta = 37.0^\circ \times \frac{\pi}{180^\circ} = 0.6458\text{ rad}. (2) Effort work: Weffort=F⋅(dEθ)=600×(0.500×0.6458)=193.7 JW_{\text{effort}} = F \cdot (d_E \theta) = 600 \times (0.500 \times 0.6458) = 193.7\text{ J}. (3) Height of projectile: h=Lsin⁡(37.0∘)=2.00×0.600=1.20 mh = L\sin(37.0^\circ) = 2.00 \times 0.600 = 1.20\text{ m}. (4) Gravity work: Wg=−mgh=−(5.00)(9.80)(1.20)=−58.8 JW_g = -mgh = -(5.00)(9.80)(1.20) = -58.8\text{ J}. (5) Work-energy theorem: 12mv2=193.7−58.8=134.9 J  ⟹  v=2(134.9)5.00≈7.37 m/s\frac{1}{2}mv^2 = 193.7 - 58.8 = 134.9\text{ J} \implies v = \sqrt{\frac{2(134.9)}{5.00}} \approx 7.37\text{ m/s}.

Loading workspace…