Resources
A gymnast of mass steps off a raised beam and lands vertically on a safety foam pit with a downward speed of . The maximum downward impact force that the gymnast's lower leg bones can safely tolerate before risking structural injury is (5.0 times the body weight). If the landing surface is a high-density mat that allows a maximum deceleration duration of before full compression, determine: (a) the magnitude of the net impulse required to stop the gymnast, (b) the actual average upward normal force exerted by the mat during the landing interval (accounting for gravity, ), and (c) whether this safety mat prevents injury by remaining within the allowable threshold.
Answer and steps
Final answer
(a) , (b) , (c) The mat exceeds the structural limit of by , failing to keep forces within the safe threshold and risking injury.
Steps
Part (a): Net Impulse Required to Bring the Gymnast to Rest
According to the impulse-momentum theorem, the net impulse delivered to an object equals its total change in momentum :
Define the upward vertical direction as positive. The gymnast's initial velocity is downward, so , and the final velocity when brought to a stop is .
Substitute the given values:
Taking the magnitude:
Part (b): Average Upward Normal Force Exerted by the Mat
The average net force acting on the gymnast during the deceleration interval is:
During the landing, two vertical forces act on the gymnast:
- The upward normal force exerted by the mat, .
- The downward force of gravity, .
Setting up Newton's second law in the vertical direction:
Rearranging to solve for :
Calculate the gravitational force:
Substitute the values:
Common Pitfall: Forgetting to include gravity () leads to equating the net force directly to the contact force from the mat (). Because gravity constantly pulls downward, the landing surface must overcome gravity in addition to providing the decelerating net force.
Part (c): Safety Evaluation
The maximum force the gymnast's legs can safely withstand is .
Comparing this threshold to the actual force exerted by the landing mat:
The average contact force exceeds the structural threshold by:
Therefore, this high-density mat stops the gymnast too quickly ( is too short), failing to keep the landing force within safe limits and risking structural injury.
Typical errors
01 The student confuses the net stopping force with the contact force exerted by the mat by omitting the downward gravitational force.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
The quantity gives the net upward force , not the total contact force . Because gravity constantly pulls downward with , the mat must push upward with enough force to both cancel gravity and decelerate the gymnast: .
- Step 3
, so the safety mat prevents injury.
Correct, so the safety mat fails to prevent injury.
Because your calculated contact force omitted the gravitational force, you concluded that the force stayed within the safe limit. Using the correct contact force of , the force exceeds the safe threshold of by , meaning the mat risks injury.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the impulse-momentum relation to find the net impulse.
You accurately calculated the numerical quotient for the net force.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakenone
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou conflated the net stopping force with the contact normal force exerted by the surface. When an object decelerates while moving vertically, the normal force must support the object's weight in addition to providing the net upward decelerating force.
REASONING PATH
Your ACEpath teacher’s suggested approach- Distinguish Net Force from Contact Force
Always draw a free-body diagram during deceleration to sum all individual forces before equating them to the net stopping force.
- Vertical Landing Force Balance
For upward deceleration:
Add the downward weight to the required net upward stopping force to find the total force exerted by the landing surface.
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify that the net upward force required for stopping is .
Set up the vertical force balance: .
Calculate the gravitational force: .
Solve for the contact force: .
Compare with the structural safety limit: since , the mat exceeds the tolerance threshold and risks injury.
(a) , (b) , (c) The mat exceeds the threshold of by and does not prevent injury.
02 The student subtracts the weight from the net stopping force instead of adding it when setting up the vertical force balance.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
Because the gymnast decelerates while moving downward, the net acceleration is directed upward. Setting upward as positive gives , which means the mat must support the weight while also decelerating the body: .
- Step 4Correct
Because this comparison relies on the contact force from Step 3, your conclusion was reversed. The actual force of exceeds the safe structural threshold by .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the impulse-momentum relationship to find the net impulse stopping the gymnast.
You correctly calculated the average net upward stopping force from impulse and time.
You accurately calculated the gravitational force acting on the gymnast.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou subtracted the gravitational force () from the required net upward force (ar{F}_{\text{net}}) rather than adding it. During an upward deceleration, the upward normal force must both overcome downward gravity and supply the net force required to stop the downward motion: .
REASONING PATH
Your ACEpath teacher’s suggested approach- Newton's Second Law for Deceleration on Landing
(taking upward as positive).
Always draw a free-body diagram for vertical landings: since normal force points up and gravity points down, .
CORRECTED PATH
ACEpath Teacher's DemonstrationSet up Newton's second law along the vertical axis with upward as positive: .
Solve for the contact force by adding weight to both sides: .
Compare the calculated contact force against the allowable limit: , showing that the mat stops the gymnast too quickly and risks injury.
(a) , (b) , (c) The mat exceeds the safe threshold by and does not prevent injury.
03 The student confuses impulse with kinetic energy and uses the work-energy theorem formula instead of momentum change.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You used the kinetic energy formula to find impulse. Impulse is defined as the change in linear momentum, .
- Step 2Correct
Your free-body equation and your weight calculation are physically sound, but the numerical result is affected by the incorrect impulse from step 1.
- Step 3
, so the safety mat does not prevent injury.
Correct, so the safety mat does not prevent injury (exceeds safe threshold by ).
Your qualitative conclusion is correct, but it is based on the inflated force value from earlier calculation errors.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly accounted for gravity by recognizing that the upward normal force from the mat must balance both weight and provide the deceleration force: .
You correctly divided impulse by the collision time to compute average force.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou substituted the kinetic energy expression where the change in linear momentum was required.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisImpulse () measures force accumulated over time and scales linearly with velocity (), whereas kinetic energy () measures work accumulated over distance.
REASONING PATH
Your ACEpath teacher’s suggested approach- Impulse-Momentum Theorem
Net impulse equals the change in momentum: .
Always compute momentum change using first-power velocity (), not squared velocity.
- Work vs. Impulse Distinction
Force over time is impulse (); force over distance is work ().
When given collision duration , apply momentum and impulse, not kinetic energy.
CORRECTED PATH
ACEpath Teacher's DemonstrationCompute the change in momentum: .
Determine average net force: .
Add the downward weight to find the normal force: .
Compare to the threshold: (exceeds threshold by ).
(a) , (b) , (c) The safety mat does not prevent injury because the required force of exceeds the threshold.
Lock it in
What is the difference between the net force and the contact force during a vertical landing?
is the vector sum of all forces. The surface must oppose both gravity and inertia: .
Similar question
A stunt performer drops vertically onto an airbag with an impact speed of and comes to rest in . Taking , find the average upward contact force exerted by the airbag.
Answer
. Key steps: . Downward weight is . Thus, .
A person jumps from a ledge and lands stiff-legged, coming to a halt from a downward speed of . The maximum safe normal force the knees can endure is . Using , determine the minimum stopping time needed to avoid exceeding this contact force limit.
Answer
. Key steps: The maximum allowable net stopping force is . Since , .
A elevator car moving downward at strikes an emergency buffer spring at the base of the shaft. The buffer compresses over a distance of while bringing the car to rest with constant deceleration. Using , calculate the average upward force exerted by the buffer during compression.
Answer
. Key steps: From kinematics, . The net upward force is . The buffer must support weight plus net deceleration: .