Resources

A 3.00 kg3.00\text{ kg} box is projected up a rough ramp inclined at θ=28.0∘\theta = 28.0^\circ above the horizontal with an initial launch speed vup=6.00 m/sv_{\text{up}} = 6.00\text{ m/s}. The coefficient of kinetic friction between the box and the incline is μk=0.200\mu_k = 0.200. The box travels up to its turning point and then slides back down to its initial release point. While students often assume that the thermal energy dissipated during the ascent equals that during the descent, and that the travel times are identical: (a) calculate the ratio of the mechanical energy lost to thermal energy on the ascent, Eth, upE_{\text{th, up}}, to the thermal energy lost on the descent, Eth, downE_{\text{th, down}}, and (b) calculate the ratio of the descent time to the ascent time, tdowntup\frac{t_{\text{down}}}{t_{\text{up}}}. Take g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer and steps

Final answer

(a) Eth, upEth, down=1.00\frac{E_{\text{th, up}}}{E_{\text{th, down}}} = 1.00, (b) tdowntup=1.50\frac{t_{\text{down}}}{t_{\text{up}}} = 1.50

Steps

01

Acceleration on the Ascent

Part (a): Thermal Energy Dissipated

When an object slides on an inclined plane of angle θ\theta, the normal force exerted by the surface on the box is: N=mgcos⁡θN = mg \cos\theta The magnitude of the kinetic friction force depends only on the normal force and the coefficient of kinetic friction μk\mu_k: fk=μkN=μkmgcos⁡θf_k = \mu_k N = \mu_k mg \cos\theta Because mm, gg, θ\theta, and μk\mu_k are constant throughout both parts of the motion, the magnitude of the friction force is identical during the ascent and the descent: fk,up=fk,down=μkmgcos⁡θf_{k, \text{up}} = f_{k, \text{down}} = \mu_k mg \cos\theta The box is launched upward, reaches a momentary stop at a distance dd along the ramp, and then slides back down the same distance dd. The thermal energy generated by friction along a path of length dd is: Eth=fkdE_{\text{th}} = f_k d Comparing the energy dissipated during ascent and descent: Eth, upEth, down=fkdfkd=1.00\frac{E_{\text{th, up}}}{E_{\text{th, down}}} = \frac{f_k d}{f_k d} = 1.00

Part (b): Ratio of Travel Times

As the box slides up the ramp, both the component of gravity parallel to the incline and the kinetic friction force point down the ramp (opposing the upward motion): ΣFup=−mgsin⁡θ−fk=−m(gsin⁡θ+μkgcos⁡θ)\Sigma F_{\text{up}} = -mg \sin\theta - f_k = -m(g\sin\theta + \mu_k g\cos\theta)

The magnitude of the upward deceleration is: aup=g(sin⁡θ+μkcos⁡θ)a_{\text{up}} = g(\sin\theta + \mu_k \cos\theta)

Using the kinematic relation v2=v02−2aupdv^2 = v_0^2 - 2a_{\text{up}}d with final speed v=0v = 0: d=12auptup2  ⟹  tup=2daupd = \frac{1}{2} a_{\text{up}} t_{\text{up}}^2 \implies t_{\text{up}} = \sqrt{\frac{2d}{a_{\text{up}}}}

02

Acceleration on the Descent

As the box slides down the ramp, gravity pulls it downward along the incline, while kinetic friction opposes the motion by pointing upward along the incline: ΣFdown=mgsin⁡θ−fk=m(gsin⁡θ−μkgcos⁡θ)\Sigma F_{\text{down}} = mg \sin\theta - f_k = m(g\sin\theta - \mu_k g\cos\theta)

The magnitude of the downward acceleration is: adown=g(sin⁡θ−μkcos⁡θ)a_{\text{down}} = g(\sin\theta - \mu_k \cos\theta)

Starting from rest (v0=0v_0 = 0) and traveling the same distance dd: d=12adowntdown2  ⟹  tdown=2dadownd = \frac{1}{2} a_{\text{down}} t_{\text{down}}^2 \implies t_{\text{down}} = \sqrt{\frac{2d}{a_{\text{down}}}}

03

Ratio of the Times

Taking the ratio of tdownt_{\text{down}} to tupt_{\text{up}}: tdowntup=aupadown=sin⁡θ+μkcos⁡θsin⁡θ−μkcos⁡θ=tan⁡θ+μktan⁡θ−μk\frac{t_{\text{down}}}{t_{\text{up}}} = \sqrt{\frac{a_{\text{up}}}{a_{\text{down}}}} = \sqrt{\frac{\sin\theta + \mu_k \cos\theta}{\sin\theta - \mu_k \cos\theta}} = \sqrt{\frac{\tan\theta + \mu_k}{\tan\theta - \mu_k}}

Substitute the given values θ=28.0∘\theta = 28.0^\circ and μk=0.200\mu_k = 0.200: sin⁡(28.0∘)≈0.4695,cos⁡(28.0∘)≈0.8829\sin(28.0^\circ) \approx 0.4695, \quad \cos(28.0^\circ) \approx 0.8829 μkcos⁡(28.0∘)=0.200×0.8829≈0.1766\mu_k \cos(28.0^\circ) = 0.200 \times 0.8829 \approx 0.1766

Evaluating the accelerations per unit gg: aup∝0.4695+0.1766=0.6461a_{\text{up}} \propto 0.4695 + 0.1766 = 0.6461 adown∝0.4695−0.1766=0.2929a_{\text{down}} \propto 0.4695 - 0.1766 = 0.2929

Thus: tdowntup=0.64610.2929≈2.206≈1.50\frac{t_{\text{down}}}{t_{\text{up}}} = \sqrt{\frac{0.6461}{0.2929}} \approx \sqrt{2.206} \approx 1.50

Key Pitfall: While the thermal energy dissipated is identical (Eth, up=Eth, downE_{\text{th, up}} = E_{\text{th, down}}) because friction magnitude and distance are the same, the travel times are not equal. Friction opposes the motion in both directions, making the net retarding force larger during the ascent (aup>adowna_{\text{up}} > a_{\text{down}}), which results in a shorter ascent time and a longer descent time (tdown>tupt_{\text{down}} > t_{\text{up}}).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets that time is inversely proportional to the square root of acceleration and directly inverts the acceleration ratio without taking the square root.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    dup=ddown=d  ⟹  fk=μkmgcos⁡(28.0∘)  ⟹  Eth, up=fkd, Eth, down=fkd  ⟹  Eth, upEth, down=1.00d_{\text{up}} = d_{\text{down}} = d \implies f_k = \mu_k m g \cos(28.0^\circ) \implies E_{\text{th, up}} = f_k d, \, E_{\text{th, down}} = f_k d \implies \frac{E_{\text{th, up}}}{E_{\text{th, down}}} = 1.00

  2. Step 2

    aup=g(sin⁡(28.0∘)+0.200cos⁡(28.0∘))=9.80(0.4695+0.1766)=6.33 m/s2  ⟹  adown=g(sin⁡(28.0∘)−0.200cos⁡(28.0∘))=9.80(0.4695−0.1766)=2.87 m/s2a_{\text{up}} = g(\sin(28.0^\circ) + 0.200\cos(28.0^\circ)) = 9.80(0.4695 + 0.1766) = 6.33\text{ m/s}^2 \implies a_{\text{down}} = g(\sin(28.0^\circ) - 0.200\cos(28.0^\circ)) = 9.80(0.4695 - 0.1766) = 2.87\text{ m/s}^2

  3. Step 3

    tdowntup=6.332.87=2.21\frac{t_{\text{down}}}{t_{\text{up}}} = \frac{6.33}{2.87} = 2.21

    Correct

    tdowntup=aupadown=6.332.87≈1.50\frac{t_{\text{down}}}{t_{\text{up}}} = \sqrt{\frac{a_{\text{up}}}{a_{\text{down}}}} = \sqrt{\frac{6.33}{2.87}} \approx 1.50

    For an object traveling a distance dd from or to rest under constant acceleration, kinematics gives d=12at2d = \frac{1}{2}at^2, which means t=2dat = \sqrt{\frac{2d}{a}}. Therefore, the ratio of times depends on the square root of the inverse acceleration ratio, not the linear ratio.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the normal force and friction force magnitudes do not change when the direction of motion reverses.

You recognized that the parallel component of gravity and friction add during ascent and oppose each other during descent.

You calculated accurate numerical values for both aupa_{\text{up}} and adowna_{\text{down}}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Kinematic Scaling Error

You set the time ratio equal to aup/adowna_{\text{up}} / a_{\text{down}} instead of aup/adown\sqrt{a_{\text{up}} / a_{\text{down}}}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You connected acceleration and time linearly (t∝1/at \propto 1/a) as if velocity were constant or distance varied, forgetting that over a fixed displacement dd with a zero-velocity endpoint, time scales inversely with the square root of acceleration (t=2d/at = \sqrt{2d/a}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Constant Acceleration Displacement Formula
  • When an object starts from rest or comes to rest over distance dd, d=12at2d = \frac{1}{2} a t^2.

  • Always solve for tt explicitly as t=2dat = \sqrt{\frac{2d}{a}} before taking ratios across two intervals with equal distance.

Ratio Scaling Check
  • For constant distance dd, t1t2=a2a1\frac{t_1}{t_2} = \sqrt{\frac{a_2}{a_1}}.

  • Check the exponent: if acceleration is quadrupled over the same distance, the travel time halves, not quarters.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the kinematic relation for distance dd starting from rest (descent) or ending at rest (ascent): d=12at2d = \frac{1}{2} a t^2.

  2. Express travel time in terms of distance and acceleration: t=2dat = \sqrt{\frac{2d}{a}}.

  3. Form the ratio of descent time to ascent time: tdowntup=2d/adown2d/aup=aupadown\frac{t_{\text{down}}}{t_{\text{up}}} = \frac{\sqrt{2d/a_{\text{down}}}}{\sqrt{2d/a_{\text{up}}}} = \sqrt{\frac{a_{\text{up}}}{a_{\text{down}}}}.

  4. Substitute your acceleration values: tdowntup=6.33 m/s22.87 m/s2=2.206≈1.50\frac{t_{\text{down}}}{t_{\text{up}}} = \sqrt{\frac{6.33\text{ m/s}^2}{2.87\text{ m/s}^2}} = \sqrt{2.206} \approx 1.50.

Final answer

(a) Eth, upEth, down=1.00\frac{E_{\text{th, up}}}{E_{\text{th, down}}} = 1.00, (b) tdowntup=1.50\frac{t_{\text{down}}}{t_{\text{up}}} = 1.50

NEXT STEPS
Final Takeaways from Your Teacher
  • Review kinematic scaling relations for constant displacement versus constant time.

  • Practice deriving ratios symbolically before substituting numerical values to prevent missing roots or powers.

OverviewACEpath Teacher's Diagnosis

02 The student reverses the sign of friction during descent by assuming friction always acts down the incline, leading to equal accelerations and an incorrect time ratio of 1.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    fk=μkmgcos⁡θ  ⟹  Eth, up=fkd,  Eth, down=fkd  ⟹  Eth, upEth, down=1.00f_k = \mu_k m g \cos\theta \implies E_{\text{th, up}} = f_k d, \; E_{\text{th, down}} = f_k d \implies \frac{E_{\text{th, up}}}{E_{\text{th, down}}} = 1.00

  2. Step 2

    aup=gsin⁡(28.0∘)+μkgcos⁡(28.0∘)a_{\text{up}} = g\sin(28.0^\circ) + \mu_k g\cos(28.0^\circ)

  3. Step 3

    adown=gsin⁡(28.0∘)+μkgcos⁡(28.0∘)  ⟹  aup=adowna_{\text{down}} = g\sin(28.0^\circ) + \mu_k g\cos(28.0^\circ) \implies a_{\text{up}} = a_{\text{down}}

    Correct

    adown=gsin⁡(28.0∘)−μkgcos⁡(28.0∘)a_{\text{down}} = g\sin(28.0^\circ) - \mu_k g\cos(28.0^\circ)

    Kinetic friction always opposes the direction of relative motion. On the descent, the box slides downward, so kinetic friction acts up the ramp, opposing gravity along the incline and reducing the net acceleration: adown=g(sin⁡θ−μkcos⁡θ)a_{\text{down}} = g(\sin\theta - \mu_k\cos\theta).

  4. Step 4

    tdowntup=aupadown=1.00\frac{t_{\text{down}}}{t_{\text{up}}} = \sqrt{\frac{a_{\text{up}}}{a_{\text{down}}}} = 1.00

    Correct

    tdowntup\frac{t_{\text{down}}}{t_{\text{up}}} = aupadown\sqrt{\frac{a_{\text{up}}}{a_{\text{down}}}} = sin⁡(28.0∘)+0.200cos⁡(28.0∘)sin⁡(28.0∘)−0.200cos⁡(28.0∘)\sqrt{\frac{\sin(28.0^\circ) + 0.200\cos(28.0^\circ)}{\sin(28.0^\circ) - 0.200\cos(28.0^\circ)}} ≈\approx 1.50

    Your kinematic formula relating the time ratio to the inverse square root of acceleration is correct, but substituting aup=adowna_{\text{up}} = a_{\text{down}} propagated the sign error from Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly evaluated the normal force and kinetic friction magnitude on the inclined plane.

You correctly determined that identical distances and friction magnitudes yield an energy dissipation ratio of 1.001.00.

You recognized that travel time over a fixed distance from rest scales inversely with the square root of acceleration.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Friction Direction Error

No, this is a conceptual error regarding the directional dependence of kinetic friction on velocity.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that the parallel component of gravity and the kinetic friction force combine with the same sign during descent as they do during ascent, forgetting that kinetic friction switches direction to oppose the downward motion.

REASONING PATH
Your ACEpath teacher’s suggested approach
Direction of Kinetic Friction
  • fkf_k always opposes the instantaneous velocity v⃗\vec{v} relative to the contact surface.

  • Draw a separate free-body diagram for each phase of motion: on ascent v⃗\vec{v} is up the incline so fkf_k points down; on descent v⃗\vec{v} is down the incline so fkf_k points up.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Evaluate the numerical values for the trigonometric terms: sin⁡(28.0∘)≈0.4695\sin(28.0^\circ) \approx 0.4695 and μkcos⁡(28.0∘)=0.200×0.8829≈0.1766\mu_k \cos(28.0^\circ) = 0.200 \times 0.8829 \approx 0.1766.

  2. Calculate the correct downward acceleration: adown=g(0.4695−0.1766)=0.2929ga_{\text{down}} = g(0.4695 - 0.1766) = 0.2929g.

  3. Calculate the upward deceleration: aup=g(0.4695+0.1766)=0.6461ga_{\text{up}} = g(0.4695 + 0.1766) = 0.6461g.

  4. Evaluate the time ratio: tdowntup=aupadown=0.64610.2929≈2.206≈1.50\frac{t_{\text{down}}}{t_{\text{up}}} = \sqrt{\frac{a_{\text{up}}}{a_{\text{down}}}} = \sqrt{\frac{0.6461}{0.2929}} \approx \sqrt{2.206} \approx 1.50.

Final answer

(a) Eth, upEth, down=1.00\frac{E_{\text{th, up}}}{E_{\text{th, down}}} = 1.00, (b) tdowntup=1.50\frac{t_{\text{down}}}{t_{\text{up}}} = 1.50

NEXT STEPS
Final Takeaways from Your Teacher
  • Always sketch separate free-body diagrams for the upward and downward motions whenever friction is present.

  • Check that aup>adowna_{\text{up}} > a_{\text{down}} physically makes sense: friction slows the object down faster on the way up, but slows its speed-up on the way down, making the descent take longer.

OverviewACEpath Teacher's Diagnosis

03 The student inverts the relationship between time and acceleration, setting t_down / t_up = √(a_down / a_up) instead of √(a_up / a_down).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Distance traveled up equals distance traveled down.  ⟹  fk is constant in magnitude both ways.  ⟹  Eth, up=fk⋅d and Eth, down=fk⋅d  ⟹  Eth, upEth, down=1.00\text{Distance traveled up equals distance traveled down.} \implies f_k \text{ is constant in magnitude both ways.} \implies E_{\text{th, up}} = f_k \cdot d \text{ and } E_{\text{th, down}} = f_k \cdot d \implies \frac{E_{\text{th, up}}}{E_{\text{th, down}}} = 1.00

  2. Step 2

    aup=9.80⋅(sin⁡(28.0∘)+0.200⋅cos⁡(28.0∘))=6.33 m/s2  ⟹  adown=9.80⋅(sin⁡(28.0∘)−0.200⋅cos⁡(28.0∘))=2.87 m/s2a_{\text{up}} = 9.80 \cdot (\sin(28.0^\circ) + 0.200 \cdot \cos(28.0^\circ)) = 6.33\text{ m/s}^2 \implies a_{\text{down}} = 9.80 \cdot (\sin(28.0^\circ) - 0.200 \cdot \cos(28.0^\circ)) = 2.87\text{ m/s}^2

  3. Step 3

    tdowntup=adownaup\frac{t_{\text{down}}}{t_{\text{up}}} = \sqrt{\frac{a_{\text{down}}}{a_{\text{up}}}}

    Correct

    tdowntup=aupadown\frac{t_{\text{down}}}{t_{\text{up}}} = \sqrt{\frac{a_{\text{up}}}{a_{\text{down}}}}

    Because d=12at2d = \frac{1}{2}at^2 (from rest at the turning point or coming to rest at the top), t=2dat = \sqrt{\frac{2d}{a}}. Time is inversely proportional to a\sqrt{a}, so the ratio tdowntup\frac{t_{\text{down}}}{t_{\text{up}}} must equal aupadown\sqrt{\frac{a_{\text{up}}}{a_{\text{down}}}}, not adownaup\sqrt{\frac{a_{\text{down}}}{a_{\text{up}}}}.

  4. Step 4

    tdowntup=2.876.33=0.673\frac{t_{\text{down}}}{t_{\text{up}}} = \sqrt{\frac{2.87}{6.33}} = 0.673

    Correct

    tdowntup=6.332.87≈1.50\frac{t_{\text{down}}}{t_{\text{up}}} = \sqrt{\frac{6.33}{2.87}} \approx 1.50

    Substituting into the inverted ratio produced 0.6730.673, which implies a faster descent than ascent, whereas the smaller descent acceleration actually requires more time (tdown>textupt_{\text{down}} > t_{ ext{up}}).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly reasoned that identical friction magnitudes over equal path lengths dissipate equal thermal energy.

You correctly accounted for the direction of friction to find the upward and downward accelerations.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Kinematic Ratio

You accidentally inverted the acceleration ratio when solving for the ratio of travel times.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing direct and inverse proportionality when taking ratios of derived quantities from d=12at2d = \frac{1}{2}at^2. Since acceleration appears in the denominator (t∝1at \propto \frac{1}{\sqrt{a}}), a smaller acceleration requires a longer time.

REASONING PATH
Your ACEpath teacher’s suggested approach
Kinematic Time from Rest over Distance $d$
  • d=12at2  ⟹  t=2dad = \frac{1}{2}at^2 \implies t = \sqrt{\frac{2d}{a}}

  • Express time explicitly before setting up ratios to ensure terms in the denominator invert properly: t1t2=a2a1\frac{t_1}{t_2} = \sqrt{\frac{a_2}{a_1}}.

Physical Reality Check
  • Smaller net acceleration over the same distance means lower average speed, which always requires more travel time.

  • Check whether adown<aextupa_{\text{down}} < a_{ ext{up}} implies tdown>textupt_{\text{down}} > t_{ ext{up}} before finalizing your numerical ratio.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Express the kinematic relation for time over distance dd: t=2dat = \sqrt{\frac{2d}{a}}.

  2. Form the ratio: tdowntup=2d/adown2d/aup=aupadown\frac{t_{\text{down}}}{t_{\text{up}}} = \frac{\sqrt{2d / a_{\text{down}}}}{\sqrt{2d / a_{\text{up}}}} = \sqrt{\frac{a_{\text{up}}}{a_{\text{down}}}}.

  3. Substitute the calculated values: tdowntup=6.33 m/s22.87 m/s2=2.206≈1.50\frac{t_{\text{down}}}{t_{\text{up}}} = \sqrt{\frac{6.33\text{ m/s}^2}{2.87\text{ m/s}^2}} = \sqrt{2.206} \approx 1.50.

Final answer

Eth, upEth, down=1.00,tdowntup=1.50\frac{E_{\text{th, up}}}{E_{\text{th, down}}} = 1.00, \quad \frac{t_{\text{down}}}{t_{\text{up}}} = 1.50

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the full fraction 2d/a12d/a2\frac{\sqrt{2d/a_1}}{\sqrt{2d/a_2}} rather than setting up the radical ratio by visual intuition.

  • Perform a sanity check on ratios: if an object experiences less acceleration on the way down, verify that your calculated ratio tdowntup\frac{t_{\text{down}}}{t_{\text{up}}} is greater than 11.

Lock it in

Similar question

01

A sled is pulled from rest across two different horizontal snow patches, each of length L=18 mL = 18\text{ m}. On Patch 1, the net acceleration is a1=4.0 m/s2a_1 = 4.0\text{ m/s}^2. On Patch 2, friction is higher and the net acceleration is a2=1.0 m/s2a_2 = 1.0\text{ m/s}^2. Find the ratio of travel times t2/t1t_2 / t_1.

Answer

Using L=12at2L = \frac{1}{2}at^2, t=2L/at = \sqrt{2L/a}. Thus t2/t1=a1/a2=4.0/1.0=2.0t_2 / t_1 = \sqrt{a_1 / a_2} = \sqrt{4.0 / 1.0} = 2.0.

02

A block is launched up a ramp inclined at θ=37.0∘\theta = 37.0^\circ where μk=0.250\mu_k = 0.250. It slides up to a halt and slides back down. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, find: (a) the ratio of accelerations aup/adowna_{\text{up}} / a_{\text{down}}, and (b) the ratio of times tdown/tupt_{\text{down}} / t_{\text{up}}. (Use sin⁡37.0∘≈0.600\sin 37.0^\circ \approx 0.600, cos⁡37.0∘≈0.800\cos 37.0^\circ \approx 0.800.)

Answer

(a) aup=g(sin⁡θ+μkcos⁡θ)=g(0.600+0.200)=0.800ga_{\text{up}} = g(\sin\theta + \mu_k\cos\theta) = g(0.600 + 0.200) = 0.800g. adown=g(sin⁡θ−μkcos⁡θ)=g(0.600−0.200)=0.400ga_{\text{down}} = g(\sin\theta - \mu_k\cos\theta) = g(0.600 - 0.200) = 0.400g. Ratio aup/adown=0.800/0.400=2.00a_{\text{up}} / a_{\text{down}} = 0.800 / 0.400 = 2.00. (b) Since distance dd is identical, tdown/tup=aup/adown=2.00≈1.41t_{\text{down}} / t_{\text{up}} = \sqrt{a_{\text{up}} / a_{\text{down}}} = \sqrt{2.00} \approx 1.41.

03

A box slides up a rough incline with initial kinetic energy K0K_0. At the highest point, a fraction η=0.20\eta = 0.20 of its initial mechanical energy has been converted to thermal energy. The box then slides back down to the release point. (a) What fraction of K0K_0 is dissipated as thermal energy on the descent? (b) If the descent takes 1.251.25 times as long as the ascent (tdown/tup=1.25t_{\text{down}}/t_{\text{up}} = 1.25), find the ratio of the net accelerations aup/adowna_{\text{up}} / a_{\text{down}}.

Answer

(a) Friction magnitude and distance are identical in both directions, so Eth, down=Eth, up=0.20K0E_{\text{th, down}} = E_{\text{th, up}} = 0.20 K_0. (b) Since d=12at2d = \frac{1}{2}at^2, tdown/tup=aup/adownt_{\text{down}} / t_{\text{up}} = \sqrt{a_{\text{up}} / a_{\text{down}}}. Therefore, aup/adown=(tdown/tup)2=(1.25)2=1.56a_{\text{up}} / a_{\text{down}} = (t_{\text{down}} / t_{\text{up}})^2 = (1.25)^2 = 1.56.

Loading workspace…