Resources
Consider the paraxial spherical mirror equation for a convex mirror of radius . (a) Evaluate the limiting image distance as the object distance approaches infinity, and describe the physical significance of this location. (b) In the planar mirror limit where the radius of curvature approaches infinity (), show what happens to the mirror equation and derive the resulting relation between image distance and object distance , stating the lateral magnification .
Answer and steps
Final answer
(a) (the image asymptotes to the virtual focal point behind the mirror); (b) As , , which yields a virtual image at equal distance with lateral magnification .
Steps
Part (a): Limiting Image Distance as
- Apply the Paraxial Mirror Equation:
The spherical mirror equation relates the object distance , image distance , and radius of curvature : -
Take the Limit as Object Distance Approaches Infinity:
When an object is placed extremely far away (), incoming rays are parallel to the optical axis, and the term approaches zero:Substituting this into the mirror equation: where is the focal length of the mirror.
- Calculate the Numerical Value:
Given (the negative sign indicates a convex mirror, whose center of curvature lies behind the reflecting surface): - Physical Significance:
The location is the virtual focal point of the convex mirror. Because , the image forms behind the mirror. Parallel incident rays reflect outward as if diverging directly from this virtual focal point.
Part (b): The Planar Mirror Limit ()
- Take the Limit of Flat Curvature:
A flat (planar) mirror has zero curvature, corresponding to an infinite radius of curvature (). As : - Derive the Object-Image Relationship:
The paraxial mirror equation simplifies to: This shows that the image forms behind the mirror at exactly the same distance that the object stands in front of it. The negative sign signifies that the image is virtual. -
Determine the Lateral Magnification:
Lateral magnification is defined as: Substituting :The positive sign indicates an upright image, and a magnitude of indicates that the image is the same size as the object.
Common Pitfall
- Sign Conventions: Remember that for convex mirrors, and are conventionally negative because their center of curvature and focus lie behind the reflective surface. Forgetting the negative sign will lead to an incorrect real focal point in front of the mirror.
Typical errors
01 The student ignores the negative sign convention for a convex mirror's radius of curvature, leading to a positive focal length.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You correctly evaluated the limit as , but you substituted instead of . Convex mirrors curve away from the incident light, so their center of curvature and focal point lie behind the mirror, giving them a negative radius of curvature.
- Step 2Correct
Because of the dropped negative sign in Step 1, you interpreted the positive image distance as a real focal point in front of the mirror. With , the negative sign indicates a virtual focus behind the reflective surface.
- Step 3
- Step 4
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly took the limit as .
You correctly evaluated the planar mirror limit as .
You accurately derived the relationship and calculated the lateral magnification .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou omitted the negative sign given for when writing down the right-hand side of the mirror equation.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou overlooked the Cartesian optical sign convention where reflective surfaces with centers of curvature located behind the reflecting surface (convex mirrors) have negative radii of curvature and negative focal lengths.
REASONING PATH
Your ACEpath teacher’s suggested approach- Spherical Mirror Sign Convention
For a convex mirror, the center of curvature and focal point lie behind the reflective surface, so both and . For a concave mirror, and .
Always double-check the mirror geometry before substituting values into .
- Interpreting Image Distance Signs
A positive image distance () means a real image in front of the mirror, whereas a negative image distance () means a virtual image behind the mirror.
Check whether your physical description (real vs. virtual) matches the sign of your calculated image distance.
CORRECTED PATH
ACEpath Teacher's DemonstrationSubstitute and : .
Solve for the limiting image distance: .
Interpret the physical meaning of : parallel incident rays reflect outward such that their backward extensions converge at a virtual focal point behind the mirror.
(a) (the virtual focal point located behind the mirror); (b) with lateral magnification .
02 The student confuses the focal length relation by writing f = 2R rather than f = R/2, resulting in an erroneous limiting image distance.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
When taking the reciprocal of , you wrote instead of , doubling the radius rather than halving it.
- Step 3
This location represents the virtual focal point behind the mirror.
- Step 4
- Step 5
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly took the limit as .
You correctly identified that the limiting image position corresponds to the virtual focal point behind the mirror.
You successfully performed the planar limit derivation in part (b) and obtained and .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou inverted as instead of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisWhen isolating a variable from a reciprocal equality , you inverted only the left-hand side and multiplied the numerator on the right, confusing the focal length relationship with .
REASONING PATH
Your ACEpath teacher’s suggested approach- Reciprocal Rule
If , then . Therefore, .
Always flip both sides entirely when taking a reciprocal, or cross-multiply: .
CORRECTED PATH
ACEpath Teacher's DemonstrationInvert both sides of to obtain .
Substitute into .
(a) (virtual focal point); (b) ,
03 The student omits the negative sign in the definition of lateral magnification for a mirror, incorrectly reporting m = -1 for a flat mirror.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
(virtual focal point behind the mirror)
- Step 2
- Step 3Correct
The standard definition of lateral magnification for spherical and planar mirrors is . Omitting the leading negative sign caused you to conclude that a plane mirror produces an inverted image () rather than an upright image ().
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly evaluated the limit as to find the virtual focal length of the convex mirror.
You properly interpreted as a virtual image located behind the mirror.
You successfully evaluated the planar mirror limit to obtain .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou wrote instead of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou confused the mirror magnification definition with the thin-lens magnification formula , or overlooked that an upright virtual reflection requires a positive lateral magnification .
REASONING PATH
Your ACEpath teacher’s suggested approach- Mirror vs. Lens Magnification Sign Convention
For all mirrors (concave, convex, and plane), lateral magnification is . For thin lenses, it is or depending on the convention used.
Check your final sign against everyday physical reality: an upright image must have , while an inverted image has .
CORRECTED PATH
ACEpath Teacher's DemonstrationRecall the definition of lateral magnification for a mirror: .
Substitute into the formula: .
(indicating an upright image of identical size)
Lock it in
What are the sign conventions for the radius of curvature and focal length of convex versus concave spherical mirrors?
Convex mirrors have and (virtual focus behind the mirror). Concave mirrors have and (real focus in front of the mirror).
Similar question
An object is placed in front of a convex mirror with a radius of curvature of magnitude . Find the image distance and the lateral magnification .
Answer
, . For a convex mirror, . Using , we get , so . Then .
A concave mirror has a radius of curvature of magnitude . An object is placed in front of it. (a) Determine the image distance . (b) Contrast its image type (real vs. virtual) with that formed by a convex mirror of the same magnitude and object distance.
Answer
(a) ; (b) The concave mirror produces a real image in front of the mirror, while the convex mirror produces a virtual image behind the mirror (). For the concave mirror, , giving (real). For the convex mirror, , giving (virtual).
A passenger-side car mirror is convex with focal length . A trailing vehicle produces an image with lateral magnification . Determine how far the trailing vehicle is from the mirror () and the image distance ().
Answer
, . Magnification is . Substitute into : , yielding . Then .