Resources

A space probe of mass m=1200 kgm = 1200\text{ kg} is launched radially outward from the surface of an airless spherical asteroid of mass M=4.50×1018 kgM = 4.50 \times 10^{18}\text{ kg} and radius R=8.00×104 mR = 8.00 \times 10^4\text{ m}. Because the altitude varies over planetary scales, the local uniform field approximation Ug=mghU_g = mgh breaks down, requiring the asymptotic gravitational potential energy formula Ug(r)=−GMmrU_g(r) = -\frac{G M m}{r} with Ug(∞)=0 JU_g(\infty) = 0\text{ J}, where G=6.674×10−11 N⋅m2/kg2G = 6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2. (a) Calculate the gravitational potential energy Ug,0U_{g,0} of the probe at the asteroid's surface. (b) Determine the escape speed vescv_{\text{esc}} required for the probe to reach an infinite distance (r→∞r \to \infty) with zero residual kinetic energy (K∞=0 JK_\infty = 0\text{ J}). (c) If the probe is launched with an initial speed of v0=120 m/sv_0 = 120\text{ m/s}, calculate its kinetic energy K∞K_\infty and asymptotic speed v∞v_\infty as r→∞r \to \infty.

Answer and steps

Final answer

(a) Ug,0=−4.51×106 JU_{g,0} = -4.51 \times 10^6\text{ J}; (b) vesc=86.6 m/sv_{\text{esc}} = 86.6\text{ m/s}; (c) K∞=4.13×106 JK_\infty = 4.13 \times 10^6\text{ J}, v∞=83.0 m/sv_\infty = 83.0\text{ m/s}.

Steps

Part (a): Gravitational Potential Energy at the Surface

For distances on a planetary scale, the gravitational potential energy of a two-body system is defined with the reference point at infinity (Ug(∞)=0 JU_g(\infty) = 0\text{ J}):

Ug(r)=−GMmrU_g(r) = -\frac{G M m}{r}

At the asteroid's surface, the radial distance from the center of mass is equal to the radius RR:

Ug,0=−GMmRU_{g,0} = -\frac{G M m}{R}

Substitute the given values:

Ug,0=−(6.674×10−11 N⋅m2/kg2)(4.50×1018 kg)(1200 kg)8.00×104 mU_{g,0} = -\frac{(6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2)(4.50 \times 10^{18}\text{ kg})(1200\text{ kg})}{8.00 \times 10^4\text{ m}}

Ug,0=−3.604×1011 J⋅m8.00×104 m≈−4.51×106 JU_{g,0} = -\frac{3.604 \times 10^{11}\text{ J}\cdot\text{m}}{8.00 \times 10^4\text{ m}} \approx -4.51 \times 10^6\text{ J}

(Pitfall note: Potential energy in this convention is strictly negative for bound states, representing a gravitational potential well.)


Part (b): Escape Speed

Since gravity is a conservative force and no atmospheric drag is present, total mechanical energy is conserved:

E=K+Ug=constantE = K + U_g = \text{constant}

To just escape the asteroid's gravitational pull, the probe must reach r→∞r \to \infty with zero residual kinetic energy (K∞=0 JK_\infty = 0\text{ J}). Since Ug(∞)=0 JU_g(\infty) = 0\text{ J}, the total energy at escape threshold is E=0 JE = 0\text{ J}:

Esurface=K0+Ug,0=0E_{\text{surface}} = K_0 + U_{g,0} = 0

12mvesc2−GMmR=0\frac{1}{2}m v_{\text{esc}}^2 - \frac{G M m}{R} = 0

Dividing by mass mm and solving for vescv_{\text{esc}}:

vesc=2GMRv_{\text{esc}} = \sqrt{\frac{2 G M}{R}}

Substitute the values:

vesc=2(6.674×10−11 N⋅m2/kg2)(4.50×1018 kg)8.00×104 m=6.007×1088.00×104≈7508.25≈86.6 m/sv_{\text{esc}} = \sqrt{\frac{2(6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2)(4.50 \times 10^{18}\text{ kg})}{8.00 \times 10^4\text{ m}}} = \sqrt{\frac{6.007 \times 10^8}{8.00 \times 10^4}} \approx \sqrt{7508.25} \approx 86.6\text{ m/s}


Part (c): Kinetic Energy and Speed at Infinity

When launched with v0=120 m/sv_0 = 120\text{ m/s}, the initial kinetic energy at the surface is:

K0=12mv02=12(1200 kg)(120 m/s)2=8.64×106 JK_0 = \frac{1}{2}m v_0^2 = \frac{1}{2}(1200\text{ kg})(120\text{ m/s})^2 = 8.64 \times 10^6\text{ J}

By the conservation of mechanical energy:

K0+Ug,0=K∞+Ug(∞)K_0 + U_{g,0} = K_\infty + U_g(\infty)

Since Ug(∞)=0 JU_g(\infty) = 0\text{ J}:

K∞=K0+Ug,0=8.64×106 J+(−4.505×106 J)≈4.13×106 JK_\infty = K_0 + U_{g,0} = 8.64 \times 10^6\text{ J} + (-4.505 \times 10^6\text{ J}) \approx 4.13 \times 10^6\text{ J}

Now solve for the asymptotic speed v∞v_\infty:

K∞=12mv∞2  ⟹  v∞=2K∞mK_\infty = \frac{1}{2}m v_\infty^2 \implies v_\infty = \sqrt{\frac{2 K_\infty}{m}}

v∞=2(4.135×106 J)1200 kg=6891.7≈83.0 m/sv_\infty = \sqrt{\frac{2(4.135 \times 10^6\text{ J})}{1200\text{ kg}}} = \sqrt{6891.7} \approx 83.0\text{ m/s}

(Alternative check: Using velocity relations directly, v∞=v02−vesc2=1202−86.652≈83.0 m/sv_\infty = \sqrt{v_0^2 - v_{\text{esc}}^2} = \sqrt{120^2 - 86.65^2} \approx 83.0\text{ m/s}.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student treats gravitational potential energy as a positive quantity by dropping the negative sign, leading to an incorrect positive surface potential energy.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    U_{g,0} = GMmR\frac{GMm}{R} = (6.674×10−11)(4.50×1018)(1200)8.00×104\frac{(6.674 \times 10^{-11})(4.50 \times 10^{18})(1200)}{8.00 \times 10^4}   ⟹  \implies U_{g,0} = 4.50 ×\times 10^6 J\text{ J}

    Correct

    U_{g,0} = -GMmR\frac{GMm}{R} = -(6.674×10−11 N⋅m2/kg2)(4.50×1018 kg)(1200 kg)8.00×104 m\frac{(6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2)(4.50 \times 10^{18}\text{ kg})(1200\text{ kg})}{8.00 \times 10^4\text{ m}} ≈\approx -4.51 ×\times 10^6 J\text{ J}_

    You used the positive formula GMmR\frac{GMm}{R} instead of −GMmR-\frac{GMm}{R}. By convention, when the reference zero is set at infinity (Ug(∞)=0 JU_g(\infty) = 0\text{ J}), gravitational potential energy for any finite distance is strictly negative.

  2. Step 2

    12\frac{1}{2}m v_{esc\text{esc}}^2 - GMmR\frac{GMm}{R} = 0   ⟹  \implies v_{esc\text{esc}} = 2GMR\sqrt{\frac{2GM}{R}} = 2(6.674×10−11)(4.50×1018)8.00×104\sqrt{\frac{2(6.674 \times 10^{-11})(4.50 \times 10^{18})}{8.00 \times 10^4}}   ⟹  \implies v_{esc\text{esc}} = 86.6 m/s\text{ m/s}_

  3. Step 3

    K_0 = 12\frac{1}{2}(1200)(120)^2 = 8.64 ×\times 10^6 J\text{ J}   ⟹  \implies K_0 + U_{g,0} = K_∞\infty + 0   ⟹  \implies K_∞\infty = 8.64 ×\times 10^6 - 4.50 ×\times 10^6 = 4.14 ×\times 10^6 J\text{ J}   ⟹  \implies v_∞\infty = 2(4.14×106)1200\sqrt{\frac{2(4.14 \times 10^6)}{1200}} = 83.0 m/s\text{ m/s}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly derived and calculated the escape speed using energy conservation.

You accurately calculated the initial kinetic energy and solved for both the residual kinetic energy and speed at infinity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of negative sign in gravitational potential energy

You omitted the negative sign in the gravitational potential energy formula Ug(r)=−GMmrU_g(r) = -\frac{GMm}{r} when calculating the surface potential energy Ug,0U_{g,0}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the absolute potential energy convention (U(∞)=0 JU(\infty) = 0\text{ J}, where all bound states lie in a negative potential well) with local uniform approximations (mghmgh, where potential energy is often taken as positive above a chosen surface).

REASONING PATH
Your ACEpath teacher’s suggested approach
Gravitational Potential Well Convention
  • When the reference point is chosen at infinity (Ug(∞)=0U_g(\infty) = 0), gravitational potential energy is always negative: Ug(r)=−GMmrU_g(r) = -\frac{GMm}{r}.

  • Always write the explicit negative sign for two-body gravitational potential energy when using the asymptotic reference point.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the asymptotic formula with the leading negative sign: Ug,0=−GMmRU_{g,0} = -\frac{GMm}{R}.

  2. Substitute the given parameters: Ug,0=−(6.674×10−11)(4.50×1018)(1200)8.00×104 JU_{g,0} = -\frac{(6.674 \times 10^{-11})(4.50 \times 10^{18})(1200)}{8.00 \times 10^4}\text{ J}.

  3. Compute the value to three significant figures: Ug,0≈−4.51×106 JU_{g,0} \approx -4.51 \times 10^6\text{ J}.

Final answer

(a) Ug,0=−4.51×106 JU_{g,0} = -4.51 \times 10^6\text{ J}; (b) vesc=86.6 m/sv_{\text{esc}} = 86.6\text{ m/s}; (c) K∞=4.13×106 JK_\infty = 4.13 \times 10^6\text{ J}, v∞=83.0 m/sv_\infty = 83.0\text{ m/s}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize that celestial gravitational potential energy is strictly negative when zero is defined at infinity.

  • Double-check that algebraic signs in conservation of energy equations match the defined reference state.

OverviewACEpath Teacher's Diagnosis

02 The student forgets the factor of 2 when equating kinetic and gravitational potential energy for escape velocity, using v = √(GM/R) instead of √(2GM/R).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    U(g,0)=−GMmR=−(6.674×10−11)(4.50×1018)(1200)8.00×104=−4.50×106 JU_{(g,0)} = -\frac{GMm}{R} = -\frac{(6.674 \times 10^{-11})(4.50 \times 10^{18})(1200)}{8.00 \times 10^4} = -4.50 \times 10^6\text{ J}

  2. Step 2

    12mvesc2=GMmR  ⟹  vesc=GMR=(6.674×10−11)(4.50×1018)8.00×104=3754.125=61.3 m/s\frac{1}{2}mv_{\text{esc}}^2 = \frac{GMm}{R} \implies v_{\text{esc}} = \sqrt{\frac{GM}{R}} = \sqrt{\frac{(6.674 \times 10^{-11})(4.50 \times 10^{18})}{8.00 \times 10^4}} = \sqrt{3754.125} = 61.3\text{ m/s}

    Correct

    12mvesc2−GMmR=0  ⟹  vesc=2GMR≈86.6 m/s\frac{1}{2}mv_{\text{esc}}^2 - \frac{GMm}{R} = 0 \implies v_{\text{esc}} = \sqrt{\frac{2GM}{R}} \approx 86.6\text{ m/s}

    When solving 12mvesc2=GMmR\frac{1}{2}mv_{\text{esc}}^2 = \frac{GMm}{R} for vescv_{\text{esc}}, multiplying both sides by 22 gives vesc2=2GMRv_{\text{esc}}^2 = \frac{2GM}{R}. Omitting this factor of 22 yields the circular orbital speed formula vorb=GMRv_{\text{orb}} = \sqrt{\frac{GM}{R}} instead of the escape speed formula vesc=2GMRv_{\text{esc}} = \sqrt{\frac{2GM}{R}}.

  3. Step 3

    K0=12(1200)(120)2=8.64×106 J  ⟹  Emech=K0+U(g,0)=8.64×106−4.50×106=4.14×106 J  ⟹  K∞=4.14×106 J  ⟹  v∞=2(4.14×106)1200=83.0 m/sK_0 = \frac{1}{2}(1200)(120)^2 = 8.64 \times 10^6\text{ J} \implies E_{\text{mech}} = K_0 + U_{(g,0)} = 8.64 \times 10^6 - 4.50 \times 10^6 = 4.14 \times 10^6\text{ J} \implies K_\infty = 4.14 \times 10^6\text{ J} \implies v_\infty = \sqrt{\frac{2(4.14 \times 10^6)}{1200}} = 83.0\text{ m/s}

WHAT YOU DID WELL
Compliments from Your Teacher

You remembered that gravitational potential energy relative to infinity is negative.

You successfully applied mechanical energy conservation E=K+UgE = K + U_g across planetary distances.

You correctly computed kinetic energy and extracted speed from K=12mv2K = \frac{1}{2}mv^2 in part (c).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted factor of 2 in escape velocity derivation

You set up 12mvesc2=GMmR\frac{1}{2}mv_{\text{esc}}^2 = \frac{GMm}{R} correctly on your first line of part (b), but dropped the coefficient 22 when isolating vescv_{\text{esc}}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the algebraic isolation of kinetic energy with circular orbital equilibrium, or dropping the 12\frac{1}{2} prefactor when solving for velocity.

REASONING PATH
Your ACEpath teacher’s suggested approach
Clear the half first
  • 12mv2=X  ⟹  v2=2Xm\frac{1}{2}mv^2 = X \implies v^2 = \frac{2X}{m}

  • Always multiply by 22 before taking the square root when solving for any velocity from a kinetic energy expression.

Escape vs. Orbit sanity check
  • vesc=2 vorbv_{\text{esc}} = \sqrt{2}\,v_{\text{orb}}

  • Verify that your escape speed is 2≈1.414\sqrt{2} \approx 1.414 times larger than the circular orbital speed at the same radius.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Start from the zero total energy condition at infinity: K0+Ug,0=0K_0 + U_{g,0} = 0.

  2. Substitute explicit formulas: 12mvesc2−GMmR=0\frac{1}{2}m v_{\text{esc}}^2 - \frac{GMm}{R} = 0.

  3. Cancel mass mm and multiply both sides by 22: vesc2=2GMRv_{\text{esc}}^2 = \frac{2GM}{R}.

  4. Take the square root and evaluate: vesc=2(6.674×10−11)(4.50×1018)8.00×104=7508.25≈86.6 m/sv_{\text{esc}} = \sqrt{\frac{2(6.674 \times 10^{-11})(4.50 \times 10^{18})}{8.00 \times 10^4}} = \sqrt{7508.25} \approx 86.6\text{ m/s}.

Final answer

vesc≈86.6 m/sv_{\text{esc}} \approx 86.6\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between the circular orbital speed formula v=GM/Rv = \sqrt{GM/R} (derived from Fnet=macF_{\text{net}} = ma_c) and escape speed v=2GM/Rv = \sqrt{2GM/R} (derived from Emech=0E_{\text{mech}} = 0).

  • Practice solving two-body energy conservation equations while explicitly showing the multiplication by 22 when clearing 12mv2\frac{1}{2}mv^2.

OverviewACEpath Teacher's Diagnosis

03 The student subtracts speeds directly (v_∞ = v_0 - v_esc) instead of applying conservation of mechanical energy to determine the speed at infinity.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ug,0=−GMmR  ⟹  Ug,0=−(6.674×10−11)(4.50×1018)(1200)8.00×104  ⟹  Ug,0=−4.50×106 JU_{g,0} = -\frac{G M m}{R} \implies U_{g,0} = -\frac{(6.674 \times 10^{-11})(4.50 \times 10^{18})(1200)}{8.00 \times 10^4} \implies U_{g,0} = -4.50 \times 10^6\text{ J}

  2. Step 2

    12mvesc2−GMmR=0  ⟹  vesc=2GMR=2(6.674×10−11)(4.50×1018)8.00×104  ⟹  vesc=86.6 m/s\frac{1}{2}m v_{\text{esc}}^2 - \frac{G M m}{R} = 0 \implies v_{\text{esc}} = \sqrt{\frac{2 G M}{R}} = \sqrt{\frac{2(6.674 \times 10^{-11})(4.50 \times 10^{18})}{8.00 \times 10^4}} \implies v_{\text{esc}} = 86.6\text{ m/s}

  3. Step 3

    v∞=v0−vesc  ⟹  v∞=120−86.6=33.4 m/sv_\infty = v_0 - v_{\text{esc}} \implies v_\infty = 120 - 86.6 = 33.4\text{ m/s}

    Correct

    K∞=K0+Ug,0=12mv02−GMmR  ⟹  v∞=v02−vesc2=1202−86.652≈83.0 m/sK_\infty = K_0 + U_{g,0} = \frac{1}{2}m v_0^2 - \frac{G M m}{R} \implies v_\infty = \sqrt{v_0^2 - v_{\text{esc}}^2} = \sqrt{120^2 - 86.65^2} \approx 83.0\text{ m/s}

    You subtracted the speeds linearly (v∞=v0−vescv_\infty = v_0 - v_{\text{esc}}). Kinetic energy depends on speed squared (K∝v2K \propto v^2), so energy is conserved, not speed.

  4. Step 4

    K∞=12mv∞2=12(1200)(33.4)2  ⟹  K∞=6.69×105 JK_\infty = \frac{1}{2}m v_\infty^2 = \frac{1}{2}(1200)(33.4)^2 \implies K_\infty = 6.69 \times 10^5\text{ J}

    Correct

    K∞=K0+Ug,0=8.64×106 J−4.51×106 J≈4.13×106 JK_\infty = K_0 + U_{g,0} = 8.64 \times 10^6\text{ J} - 4.51 \times 10^6\text{ J} \approx 4.13 \times 10^6\text{ J}

    You computed kinetic energy from the incorrect asymptotic speed obtained in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the planetary gravitational potential energy formula Ug=−GMmrU_g = -\frac{G M m}{r}.

You correctly applied energy conservation to derive and compute the escape speed vesc=86.6 m/sv_{\text{esc}} = 86.6\text{ m/s}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Linear subtraction of speeds instead of energy conservation

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated speed as a conserved quantity that subtracts linearly against the escape velocity, overlooking that gravity removes kinetic energy (K∝v2K \propto v^2), so velocities combine in quadrature (v∞=v02−vesc2v_\infty = \sqrt{v_0^2 - v_{\text{esc}}^2}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Quadrature vs. Linear Subtraction
  • Etotal=K+UgE_{\text{total}} = K + U_g is constant, meaning K∞=K0−KescK_\infty = K_0 - K_{\text{esc}}, which gives v∞2=v02−vesc2v_\infty^2 = v_0^2 - v_{\text{esc}}^2.

  • Always write down the full mechanical energy conservation equation K0+U0=K∞+U∞K_0 + U_0 = K_\infty + U_\infty before solving for the final velocity.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the total mechanical energy at launch: E0=K0+Ug,0=12(1200 kg)(120 m/s)2+(−4.505×106 J)=8.64×106 J−4.505×106 J=4.135×106 JE_0 = K_0 + U_{g,0} = \frac{1}{2}(1200\text{ kg})(120\text{ m/s})^2 + (-4.505 \times 10^6\text{ J}) = 8.64 \times 10^6\text{ J} - 4.505 \times 10^6\text{ J} = 4.135 \times 10^6\text{ J}.

  2. Set E∞=E0E_\infty = E_0, where E∞=K∞+Ug(∞)=K∞+0 JE_\infty = K_\infty + U_g(\infty) = K_\infty + 0\text{ J}, giving K∞=4.13×106 JK_\infty = 4.13 \times 10^6\text{ J}.

  3. Solve for asymptotic speed: v∞=2K∞m=2(4.135×106 J)1200 kg≈83.0 m/sv_\infty = \sqrt{\frac{2 K_\infty}{m}} = \sqrt{\frac{2(4.135 \times 10^6\text{ J})}{1200\text{ kg}}} \approx 83.0\text{ m/s}.

Final answer

(a) Ug,0=−4.51×106 JU_{g,0} = -4.51 \times 10^6\text{ J}; (b) vesc=86.6 m/sv_{\text{esc}} = 86.6\text{ m/s}; (c) K∞=4.13×106 JK_\infty = 4.13 \times 10^6\text{ J}, v∞=83.0 m/sv_\infty = 83.0\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice using v∞=v02−vesc2v_\infty = \sqrt{v_0^2 - v_{\text{esc}}^2} whenever launch speed exceeds escape velocity.

  • Remember that velocities never add or subtract linearly when work is done by a non-uniform conservative field.

Lock it in

Similar question

01

A small satellite of mass m=500 kgm = 500\text{ kg} orbits a planet of mass M=2.00×1024 kgM = 2.00 \times 10^{24}\text{ kg} at a distance r=1.00×107 mr = 1.00 \times 10^7\text{ m} from its center. Calculate its gravitational potential energy relative to infinity (G=6.674×10−11 N⋅m2/kg2G = 6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2).

Answer

Ug=−6.67×109 JU_g = -6.67 \times 10^9\text{ J}. Key steps: Ug=−GMmr=−(6.674×10−11)(2.00×1024)(500)1.00×107≈−6.67×109 JU_g = -\frac{GMm}{r} = -\frac{(6.674 \times 10^{-11})(2.00 \times 10^{24})(500)}{1.00 \times 10^7} \approx -6.67 \times 10^9\text{ J}.

02

A projectile is launched vertically upward from the surface of a moon (M=7.20×1022 kgM = 7.20 \times 10^{22}\text{ kg}, R=1.80×106 mR = 1.80 \times 10^6\text{ m}) with an initial speed v0=1000 m/sv_0 = 1000\text{ m/s}. Find the maximum radial distance rmaxr_{\text{max}} from the moon's center reached by the projectile.

Answer

rmax≈2.21×106 mr_{\text{max}} \approx 2.21 \times 10^6\text{ m}. Key steps: At maximum height, v=0v = 0. By energy conservation, 12mv02−GMmR=−GMmrmax\frac{1}{2}m v_0^2 - \frac{GMm}{R} = -\frac{GMm}{r_{\text{max}}}. Dividing by mm gives GMrmax=GMR−12v02=2.670×106−0.500×106=2.170×106 J/kg\frac{GM}{r_{\text{max}}} = \frac{GM}{R} - \frac{1}{2}v_0^2 = 2.670 \times 10^6 - 0.500 \times 10^6 = 2.170 \times 10^6\text{ J/kg}. Thus rmax=4.805×10122.170×106≈2.21×106 mr_{\text{max}} = \frac{4.805 \times 10^{12}}{2.170 \times 10^6} \approx 2.21 \times 10^6\text{ m}.

03

A meteoroid of mass mm is released from rest at a distance r=4Rr = 4R from the center of a spherical planet of mass MM and radius RR. Find its impact speed vv when it strikes the surface, in terms of GG, MM, and RR.

Answer

v=3GM2Rv = \sqrt{\frac{3GM}{2R}}. Key steps: Mechanical energy conservation yields Ei=Ef  ⟹  −GMm4R=12mv2−GMmRE_i = E_f \implies -\frac{GMm}{4R} = \frac{1}{2}m v^2 - \frac{GMm}{R}. Rearranging gives 12v2=GMR−GM4R=3GM4R\frac{1}{2}v^2 = \frac{GM}{R} - \frac{GM}{4R} = \frac{3GM}{4R}, so v=3GM2Rv = \sqrt{\frac{3GM}{2R}}.

Loading workspace…