Resources
A cargo block of mass rests on an incline tilted at an angle above the horizontal. A worker pulls a light rope attached to the block parallel to the incline such that the block moves up the incline at a constant velocity of . The coefficient of kinetic friction between the block and the incline is . Let . (a) Calculate the magnitude of the total contact force vector (the vector sum of the normal force and kinetic friction) exerted by the inclined ramp on the cargo block. (b) Identify the magnitude, direction, and recipient body of the Newton's third law reaction partner to .
Answer and steps
Final answer
(a) ; (b) The reaction force is the total contact force exerted by the block on the incline ramp, having an equal magnitude of , directed at an angle of measured downward from the upward incline surface (or downhill from the perpendicular inward normal), acting on the ramp.
Steps
Part (a): Magnitude of the Total Contact Force on the Cargo Block
1. Identify the contact force components The surface of the incline exerts two distinct contact forces on the cargo block:
- The normal force (), perpendicular to the incline ramp and pointing outward away from the surface.
- The kinetic friction force (), parallel to the incline ramp opposing the direction of relative motion.
Since the block is moving up the incline at a constant velocity, it is in dynamic equilibrium ().
2. Calculate the normal force () Along the axis perpendicular to the incline, the block experiences no acceleration:
Substitute the given values (, , and ):
3. Calculate the kinetic friction force () The kinetic friction force depends on the normal force and the coefficient of kinetic friction :
4. Determine the magnitude of the total contact force () Because the normal force and the friction force are mutually perpendicular, their vector sum has a magnitude given by the Pythagorean theorem:
Rounding to three significant figures gives:
Part (b): Newton's Third Law Reaction Partner
According to Newton's Third Law, if body exerts a force on body , then body exerts an equal and opposite force on body :
- Recipient Body: The force acts on the incline ramp.
- Magnitude: Exactly equal to the action force:
- Direction: Exactly opposite to the contact force exerted on the block.
- The angle between the total contact force and the normal direction is:
- Measured downward into the incline from the uphill surface, the direction is downward from the upward incline surface (corresponding to downhill from the perpendicular inward normal vector).
Common Pitfall: Students often mistake the normal force for the "Newton's third law reaction to gravity." Gravitational force is an interaction between the Earth and the block, whereas the contact force is an interaction between the block and the ramp surface. The reaction partner to any force exerted by the ramp on the block is strictly the corresponding force exerted by the block on the ramp.
Typical errors
01 The student calculates the total contact force by simply adding the magnitudes of the normal force and friction as scalars instead of taking their vector sum.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
Normal force is perpendicular to the incline, while kinetic friction is parallel to the incline. Because these two component forces are perpendicular ( apart), their resultant magnitude must be found using the Pythagorean theorem, not simple scalar addition.
- Step 4
, ,
Correct, directed opposite to ( downward from the uphill incline), acting on the inclined ramp.
You correctly recognized that the reaction force acts on the ramp and points in the exact opposite direction, but the magnitude was affected by the earlier calculation error in part (a).
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly resolved the forces perpendicular to the incline to find the normal force.
You calculated the kinetic friction force accurately using .
You correctly identified the recipient body of the reaction force as the inclined ramp.
You stated the correct relative orientation for Newton's third law pair as directly opposite.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou summed and as regular numbers instead of using the Pythagorean theorem for perpendicular vectors.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the total vector contact force magnitude with the algebraic sum of its component magnitudes . When two vector components are orthogonal, the magnitude of their resultant is given by .
REASONING PATH
Your ACEpath teacher’s suggested approach- Component Geometry Check
The normal force is always perpendicular to the contact surface, while friction is always parallel to it.
Sketch the two force vectors with their right angle before combining them.
- Vector Magnitude Rule
For mutually perpendicular vector components , the magnitude of their resultant vector is .
Use whenever finding total contact force magnitude.
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify that , so the angle between them is .
Apply the Pythagorean theorem: .
Compute: .
Apply Newton's Third Law for part (b): Magnitude , recipient is the inclined ramp, direction is opposite to .
(a) ; (b) The reaction force acts on the inclined ramp with magnitude , directed opposite to the contact force on the block ( downward from the upward incline surface).
02 The student misidentifies the normal force as M * g instead of M * g * cos(θ), neglecting the incline angle.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Because the block is on a ramp inclined at , only the component of gravity perpendicular to the surface balances the normal force. Setting neglects the slope angle.
- Step 2Correct
You applied the kinetic friction formula correctly, but the numerical value inherited the error from your normal force in Step 1.
- Step 3Correct
You correctly used the Pythagorean theorem to find the resultant magnitude of the perpendicular components and , but the result was affected by the initial normal force calculation.
- Step 4Correct
; \text{Direction: opposite to } \vec{R}_{\text{surface on block}} \text{ (104.0^$\circ downward from uphill incline)}; \text{Recipient: inclined ramp}
You correctly identified that the Newton's third law pair acts on the inclined ramp with equal magnitude and opposite direction. Only the numerical magnitude was affected by Step 1.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that the total contact force consists of two mutually perpendicular vectors: the normal force and kinetic friction.
You accurately combined the contact force components using the Pythagorean theorem.
You correctly identified the recipient body of the reaction force as the inclined ramp.
You correctly stated that the reaction partner must be directly opposite in direction to the action force.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou set out of habit, overlooking that gravity must be resolved along tilted coordinate axes perpendicular to the incline.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisDefaulting to horizontal-surface equilibrium () instead of setting up a dynamic equilibrium equation along the perpendicular axis ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Establish Tilted Axes
For motion on an inclined plane, set the coordinate axes parallel and perpendicular to the ramp surface.
Always resolve the weight vector into parallel to the slope and perpendicular to the slope.
- Perpendicular Equilibrium
When there is no acceleration off or into the surface, .
Equate the normal force to the sum of all perpendicular opposing forces: (plus or minus any external perpendicular components).
CORRECTED PATH
ACEpath Teacher's DemonstrationBalance forces perpendicular to the incline: .
Compute kinetic friction: .
Find total contact force magnitude: .
State the reaction partner on the ramp: magnitude is , directed opposite to ( downward from the uphill surface).
(a) ; (b) Magnitude: , Direction: opposite to the contact force on the block ( downhill from the perpendicular inward normal), Recipient: inclined ramp.
03 The student confuses Newton's third law reaction partner with an internal balancing force, identifying the recipient body as the cargo block itself.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
- Step 4Correct
Newton's third law action-reaction pairs never act on the same body. Since the ramp exerts the contact force on the block, the reaction force must act on the ramp.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the normal force and kinetic friction force from the incline geometry.
You used vector addition to find the magnitude of the total contact force.
You identified that the reaction force must have an equal magnitude and point in the opposite direction.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the reaction force as an equilibrium or balancing force acting on the same object, overlooking that Newton's third law pairs always act on different interacting bodies.
REASONING PATH
Your ACEpath teacher’s suggested approach- Action-Reaction Pair Reciprocity
If object exerts a force on object (), its Newton's third law pair is always exerted by object on object ().
Always swap the agent and the recipient labels: the reaction to 'surface on block' is strictly 'block on surface'.
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify the agent and recipient of the original force: the inclined ramp (agent) exerts on the cargo block (recipient).
Apply Newton's third law by swapping the two interacting bodies: .
State the recipient body of this reaction force as the inclined ramp.
The recipient body is the inclined ramp (the reaction force is exerted by the block on the ramp).
Lock it in
What are the two components of the total contact force exerted by a surface on an object, and what is the geometric angle between them?
The two components are the normal force (perpendicular to the surface) and the friction force (parallel to the surface). The angle between them is always .
Similar question
A box is pushed along a horizontal floor with kinetic friction coefficient at constant velocity. Taking , find the magnitude of the total contact force exerted by the floor on the box.
Answer
. Key steps: On a level surface, . The friction force is . Because and are perpendicular, the total contact force is .
A block slides down an incline of angle . The normal force exerted by the incline on the block is , and the kinetic friction force is . (a) Calculate the magnitude of the total contact force exerted by the ramp on the block. (b) State the magnitude and recipient of the Newton's third law partner to this total contact force.
Answer
(a) ; (b) , acting on the ramp. Key steps: (a) . (b) By Newton's third law, the reaction force has identical magnitude and acts on the ramp.
A block is at rest on an incline tilted at . (a) Determine the magnitude of the total contact force exerted by the incline on the block. (b) Explain how equilibrium allows you to find this magnitude without calculating explicitly. (Take ).
Answer
(a) ; (b) Since the block is in static equilibrium and only gravity and the ramp act on it, , so and its magnitude must equal the weight . (Checking components: , , and ).