Resources
In a Millikan-style field-calibration experiment, two large, flat horizontal parallel copper plates separated by in a dry air chamber are connected to a high-voltage DC power supply. An electrostatic voltmeter records a steady potential difference of across the plates. (a) Assuming a uniform electric field between the plates away from the edges, calculate the magnitude of the electric-field strength . (b) If a singly ionized test ion () enters this uniform field region, calculate the magnitude of the electrostatic force exerted on the ion.
Answer and steps
Final answer
(a) ; (b)
Steps
Part (a): Determining the Electric-Field Strength
- Identify the relationship for a uniform electric field:
Between two large, flat parallel conducting plates separated by a distance and held at a potential difference , the electric field away from the edges is uniform. Its magnitude is given by: -
Convert the given quantities into SI base units:
- Potential difference:
- Plate separation:
-
Calculate :
(Note: The unit is equivalent to . A common pitfall is forgetting to convert centimeters to meters or kilovolts to volts before dividing.)
Part (b): Determining the Electrostatic Force on the Ion
- Identify the force formula:
The electrostatic force exerted on a particle of charge placed in an electric field has a magnitude given by: -
Substitute the given charge and calculated field strength:
- Charge of the ion:
- Electric-field strength:
- Round to three significant figures:
Typical errors
01 The student forgets to convert the plate separation from centimeters to meters, resulting in an electric field and subsequent force that are two orders of magnitude too small.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You correctly converted and applied . However, you substituted directly as centimeters instead of converting it to meters (), which made your result times too small.
- Step 2Correct
You correctly applied the relationship and performed the multiplication accurately using your value of , but the final answer is off by two orders of magnitude due to the earlier unit conversion error in Step 1.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted the potential difference from kilovolts to volts: .
You correctly identified and applied the fundamental formulas and .
You carried out the arithmetic for the electrostatic force accurately based on your intermediate field value.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou divided by directly instead of converting the plate separation to meters ().
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou overlooked standard SI base unit consistency for distance () before evaluating the ratio , propagating a factor-of-100 error into the force calculation.
REASONING PATH
Your ACEpath teacher’s suggested approach- Convert All Dimensions to SI Base Units
In SI equations where field strength is expressed in or , distance must always be converted to meters ().
Express centimeters in meters before dividing: .
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert the plate separation to meters: .
Recalculate the electric-field strength: .
Substitute the corrected electric field into the force equation: .
(a) ; (b)
02 The student misremembers the relationship between electric field and potential as E = ΔV × d instead of dividing by distance.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You multiplied the voltage by distance instead of dividing. For a uniform electric field, the relationship is , which gives .
- Step 3Correct
You correctly identified and applied the formula , but the final numerical value was affected by the incorrect value of from Step 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted centimeters to meters and kilovolts to volts.
You correctly identified the electrostatic force relationship and performed the multiplication accurately.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou multiplied the potential difference by the distance instead of dividing by it.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou misremembered the relationship between electric field, potential difference, and plate separation as rather than , which can be prevented by verifying that the units of electric field are volts per meter ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Uniform Field Formula
Between parallel conducting plates, the potential difference is , so the field strength is .
Always divide the potential difference by the plate separation to solve for electric-field strength.
- Dimensional Consistency
The SI unit of electric field is volts per meter () or newtons per coulomb ().
Check your units: multiplying volts by meters gives , not .
CORRECTED PATH
ACEpath Teacher's DemonstrationDivide the potential difference by the distance: .
Substitute the corrected electric field into the force formula: .
Multiply to obtain the electrostatic force: .
(a) ; (b)
03 The student treats the prefix kilo- as 10⁻³ or forgets to convert kilovolts to volts, using ΔV = 1.75 V.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You correctly selected the relationship , but you substituted instead of converting into standard SI units ( or ). This resulted in an electric field of rather than .
- Step 3Correct
You correctly applied the force relation and performed the arithmetic accurately based on your earlier field value, but the final numerical value is off by due to the field calculation in Step 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified and applied the uniform electric field equation .
You properly converted the separation distance from centimeters to meters ().
You selected the correct electrostatic force equation and carried out the arithmetic consistently.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou substituted the raw number from directly into the equation without converting the prefix kilo- () into base volts ().
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOverlooking non-base metric prefixes (such as kilo-, milli-, or micro-) before substituting numbers into standard SI formulas.
REASONING PATH
Your ACEpath teacher’s suggested approach- Check All Metric Prefixes First
Standard SI derived formulas require base units: volts (), meters (), and coulombs (). The prefix kilo- () means .
Always convert prefixes to powers of ten explicitly on your scratch paper before plugging them into a formula (e.g., ).
- Trace Upstream Values Before downstream steps
Any error in an intermediate variable () directly scales all downstream dependent calculations ().
Perform a quick sanity check on intermediate units and order of magnitude before carrying a computed value into subsequent parts.
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert the potential difference to standard SI base units: .
Recalculate the uniform electric field: .
Calculate the electrostatic force using the correct field: .
(a) ; (b)
Lock it in
What SI base unit must be used for distance when calculating electric-field strength ?
Meters (). Centimeters must be converted using so that the resulting field has SI units of .
Similar question
Two parallel plates separated by are connected to a power supply providing a potential difference of . Calculate the magnitude of the uniform electric field between the plates.
Answer
. Convert separation to meters: . Then compute .
A uniform electric field is established across two horizontal plates separated by with . A particle with charge enters the gap. Calculate the magnitude of the electrostatic force acting on the particle.
Answer
. Convert quantities to SI base units: and . The electric field is . The force magnitude is .
An alpha particle () experiences an electrostatic force of magnitude between two parallel conducting plates separated by . Determine the potential difference across the plates.
Answer
. Find the electric field: . Convert separation to meters: . Calculate potential difference: .