Resources

A 0.50 kg0.50\text{ kg} aerodynamic test glider moves in a vertical plane such that its two-dimensional position vector is given by r⃗(t)=(6.0t)i^+(20.0t−5.0t2)j^\vec{r}(t) = \left(6.0t\right)\hat{i} + \left(20.0t - 5.0t^2\right)\hat{j}, where distances are in meters (m\text{m}) and tt is in seconds (s\text{s}). Calculate the magnitude of the glider's instantaneous velocity and its kinetic energy at t=3.0 st = 3.0\text{ s}.

Answer and steps

Final answer

Instantaneous speed: 11.7 m/s11.7\text{ m/s}; Kinetic energy: 34.0 J34.0\text{ J}

Steps

01

Find the instantaneous velocity vector as a function of time

Instantaneous velocity is defined as the time derivative of the position vector: v⃗(t)=dr⃗dt\vec{v}(t) = \frac{d\vec{r}}{dt}

Differentiating each component of r⃗(t)=(6.0t)i^+(20.0t−5.0t2)j^\vec{r}(t) = (6.0t)\hat{i} + (20.0t - 5.0t^2)\hat{j} with respect to time tt: vx(t)=ddt(6.0t)=6.0 m/sv_x(t) = \frac{d}{dt}(6.0t) = 6.0\text{ m/s} vy(t)=ddt(20.0t−5.0t2)=20.0−10.0t m/sv_y(t) = \frac{d}{dt}(20.0t - 5.0t^2) = 20.0 - 10.0t\text{ m/s}

Combining the components gives the velocity vector: v⃗(t)=6.0i^+(20.0−10.0t)j^ m/s\vec{v}(t) = 6.0\hat{i} + (20.0 - 10.0t)\hat{j}\text{ m/s}


02

Evaluate the velocity components at t=3.0 st = 3.0\text{ s}

Substitute t=3.0 st = 3.0\text{ s} into each component:

  • Horizontal component: vx(3.0)=6.0 m/sv_x(3.0) = 6.0\text{ m/s}
  • Vertical component: vy(3.0)=20.0−10.0(3.0)=20.0−30.0=−10.0 m/sv_y(3.0) = 20.0 - 10.0(3.0) = 20.0 - 30.0 = -10.0\text{ m/s}

The negative sign indicates that the glider is moving downward at this instant.


03

Calculate the magnitude of the instantaneous velocity (speed)

The magnitude vv of the velocity vector is found using the Pythagorean theorem: v=vx2+vy2v = \sqrt{v_x^2 + v_y^2}

v=(6.0)2+(−10.0)2=36.0+100.0=136 m/s≈11.7 m/sv = \sqrt{(6.0)^2 + (-10.0)^2} = \sqrt{36.0 + 100.0} = \sqrt{136}\text{ m/s} \approx 11.7\text{ m/s}

Common Pitfall: When squaring a negative component, (−10.0)2=+100.0(-10.0)^2 = +100.0. Forgetting parentheses can lead to the incorrect subtraction 36.0−100.036.0 - 100.0.


04

Calculate the kinetic energy

Kinetic energy (EkE_k) depends on the mass mm and the square of the speed v2v^2: Ek=12mv2E_k = \frac{1}{2}mv^2

Using m=0.50 kgm = 0.50\text{ kg} and v2=136 m2/s2v^2 = 136\text{ m}^2/\text{s}^2: Ek=12(0.50 kg)(136 m2/s2)=34.0 JE_k = \frac{1}{2}(0.50\text{ kg})(136\text{ m}^2/\text{s}^2) = 34.0\text{ J}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to differentiate the position vector and incorrectly calculates velocity by dividing position coordinates by time.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    rx(3.0)=6.0(3.0)=18 m  ⟹  ry(3.0)=20.0(3.0)−5.0(3.0)2=15 m  ⟹  vx=183.0=6.0 m/s,vy=153.0=5.0 m/sr_x(3.0) = 6.0(3.0) = 18\text{ m} \implies r_y(3.0) = 20.0(3.0) - 5.0(3.0)^2 = 15\text{ m} \implies v_x = \frac{18}{3.0} = 6.0\text{ m/s}, v_y = \frac{15}{3.0} = 5.0\text{ m/s}

    Correct

    v⃗(t)=dr⃗dt=6.0i^+(20.0−10.0t)j^ m/s  ⟹  vx(3.0)=6.0 m/s,vy(3.0)=−10.0 m/s\vec{v}(t) = \frac{d\vec{r}}{dt} = 6.0\hat{i} + (20.0 - 10.0t)\hat{j}\text{ m/s} \implies v_x(3.0) = 6.0\text{ m/s}, v_y(3.0) = -10.0\text{ m/s}

    You evaluated the position vector at t=3.0 st = 3.0\text{ s} and divided by time. This yields the average velocity from t=0t = 0 to t=3.0 st = 3.0\text{ s}, not the instantaneous velocity. To find instantaneous velocity, you must differentiate the position vector with respect to time: v⃗(t)=dr⃗dt\vec{v}(t) = \frac{d\vec{r}}{dt}.

  2. Step 2

    v=6.02+5.02=36+25=61≈7.8 m/sv = \sqrt{6.0^2 + 5.0^2} = \sqrt{36 + 25} = \sqrt{61} \approx 7.8\text{ m/s}

    Correct

    v=(6.0)2+(−10.0)2=36+100=136≈11.7 m/sv = \sqrt{(6.0)^2 + (-10.0)^2} = \sqrt{36 + 100} = \sqrt{136} \approx 11.7\text{ m/s}

    You applied the vector magnitude formula correctly, but your result was affected by the incorrect vertical velocity component from Step 1.

  3. Step 3

    KE=12mv2=12(0.50)(61)=15.25 JKE = \frac{1}{2}mv^2 = \frac{1}{2}(0.50)(61) = 15.25\text{ J}

    Correct

    Ek=12mv2=12(0.50)(136)=34.0 JE_k = \frac{1}{2}mv^2 = \frac{1}{2}(0.50)(136) = 34.0\text{ J}

    You set up and evaluated the kinetic energy formula correctly using your speed, but the value is incorrect due to the propagated velocity error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly evaluated the position coordinates at t=3.0 st = 3.0\text{ s}.

You applied the Pythagorean theorem appropriately to find the magnitude of a two-dimensional vector.

You correctly set up and calculated kinetic energy using Ek=12mv2E_k = \frac{1}{2}mv^2.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing instantaneous velocity with average position-over-time

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated velocity as position divided by time (v=r/tv = r/t) instead of recognizing that instantaneous velocity is the derivative of position with respect to time (v⃗=dr⃗dt\vec{v} = \frac{d\vec{r}}{dt}). Dividing position by elapsed time only gives average velocity from the origin, which does not equal instantaneous velocity when acceleration is non-zero.

REASONING PATH
Your ACEpath teacher’s suggested approach
Instantaneous vs. Average Velocity
  • v⃗(t)=dr⃗dt\vec{v}(t) = \frac{d\vec{r}}{dt}, whereas v⃗avg=Δr⃗Δt\vec{v}_{\text{avg}} = \frac{\Delta \vec{r}}{\Delta t}.

  • Whenever position is given as a time-dependent function r⃗(t)\vec{r}(t), differentiate with respect to tt before substituting the given time.

Component Differentiation
  • ddt(ctn)=nctn−1\frac{d}{dt}(c t^n) = n c t^{n-1}.

  • Differentiate each unit vector component separately: vx(t)=drxdtv_x(t) = \frac{dr_x}{dt} and vy(t)=drydtv_y(t) = \frac{dr_y}{dt}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Differentiate the position vector with respect to time: v⃗(t)=ddt[(6.0t)i^+(20.0t−5.0t2)j^]=6.0i^+(20.0−10.0t)j^ m/s\vec{v}(t) = \frac{d}{dt}\left[(6.0t)\hat{i} + (20.0t - 5.0t^2)\hat{j}\right] = 6.0\hat{i} + (20.0 - 10.0t)\hat{j}\text{ m/s}.

  2. Substitute t=3.0 st = 3.0\text{ s}: vx(3.0)=6.0 m/sv_x(3.0) = 6.0\text{ m/s} and vy(3.0)=20.0−10.0(3.0)=−10.0 m/sv_y(3.0) = 20.0 - 10.0(3.0) = -10.0\text{ m/s}.

  3. Compute the magnitude: v=(6.0)2+(−10.0)2=36+100=136 m/s≈11.7 m/sv = \sqrt{(6.0)^2 + (-10.0)^2} = \sqrt{36 + 100} = \sqrt{136}\text{ m/s} \approx 11.7\text{ m/s}.

  4. Compute the kinetic energy: Ek=12(0.50 kg)(136 m2/s2)=34.0 JE_k = \frac{1}{2}(0.50\text{ kg})(136\text{ m}^2/\text{s}^2) = 34.0\text{ J}.

Final answer

Instantaneous speed: 11.7 m/s11.7\text{ m/s}; Kinetic energy: 34.0 J34.0\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always take the derivative dr⃗dt\frac{d\vec{r}}{dt} first to find the velocity function before plugging in any specific time value.

  • Remember that the formula v=d/tv = d/t only applies to uniform motion with constant velocity, never to accelerated or polynomial motion.

OverviewACEpath Teacher's Diagnosis

02 The student misapplies the power rule when differentiating the quadratic term by omitting the factor of 2, obtaining v_y = 20.0 - 5.0t instead of 20.0 - 10.0t.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    vx=6.0 m/s  ⟹  vy=20.0−5.0tv_x = 6.0\text{ m/s} \implies v_y = 20.0 - 5.0t

    Correct

    vx(t)=ddt(6.0t)=6.0 m/s  ⟹  vy(t)=ddt(20.0t−5.0t2)=20.0−10.0t m/sv_x(t) = \frac{d}{dt}(6.0t) = 6.0\text{ m/s} \implies v_y(t) = \frac{d}{dt}(20.0t - 5.0t^2) = 20.0 - 10.0t\text{ m/s}

    You differentiated the horizontal component correctly, but you missed multiplying by the exponent 22 when differentiating the quadratic term −5.0t2-5.0t^2, resulting in −5.0t-5.0t instead of −10.0t-10.0t.

  2. Step 2

    vy(3.0)=20.0−5.0(3.0)=5.0 m/sv_y(3.0) = 20.0 - 5.0(3.0) = 5.0\text{ m/s}

    Correct

    vy(3.0)=20.0−10.0(3.0)=−10.0 m/sv_y(3.0) = 20.0 - 10.0(3.0) = -10.0\text{ m/s}

    Your arithmetic evaluation at t=3.0 st = 3.0\text{ s} followed correctly from your previous expression for vy(t)v_y(t), but the result was affected by the differentiation error in Step 1.

  3. Step 3

    v=6.02+5.02=36+25=61≈7.8 m/sv = \sqrt{6.0^2 + 5.0^2} = \sqrt{36 + 25} = \sqrt{61} \approx 7.8\text{ m/s}

    Correct

    v=(6.0)2+(−10.0)2=36.0+100.0=136 m/s≈11.7 m/sv = \sqrt{(6.0)^2 + (-10.0)^2} = \sqrt{36.0 + 100.0} = \sqrt{136}\text{ m/s} \approx 11.7\text{ m/s}

    You correctly used the Pythagorean theorem to find the vector magnitude, but using the incorrect vertical velocity component led to an incorrect speed.

  4. Step 4

    KE = (12)\left(\frac{1}{2}\right)mv^2   ⟹  \implies KE = (12)\left(\frac{1}{2}\right)(0.50)(61) = 15.25 J\text{ J}$

    Correct

    Ek=12mv2=12(0.50)(136)=34.0 JE_k = \frac{1}{2}mv^2 = \frac{1}{2}(0.50)(136) = 34.0\text{ J}

    You correctly applied the formula Ek=12mv2E_k = \frac{1}{2}mv^2, but the numerical value was affected by your earlier speed calculation.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that velocity is the time derivative of the position vector.

You applied the Pythagorean theorem accurately to relate vector components to magnitude.

You correctly recalled and set up the kinetic energy formula Ek=12mv2E_k = \frac{1}{2}mv^2.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Differentiation Power Rule Error

You reduced the power of t2t^2 to tt without multiplying the coefficient by the original power 22.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Incomplete execution of the derivative power rule ddt(atn)=a⋅ntn−1\frac{d}{dt}(a t^n) = a \cdot n t^{n-1}, where the exponent was subtracted by 11 but the prefactor nn was omitted.

REASONING PATH
Your ACEpath teacher’s suggested approach
Power Rule Verification
  • For any term atna t^n, the derivative with respect to tt is ddt(atn)=n⋅atn−1\frac{d}{dt}(a t^n) = n \cdot a t^{n-1}.

  • Always explicitly multiply the existing coefficient by the original exponent before reducing the power by one.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Differentiate y(t)=20.0t−5.0t2y(t) = 20.0t - 5.0t^2 correctly: vy(t)=ddt(20.0t)−ddt(5.0t2)=20.0−2(5.0)t=20.0−10.0tv_y(t) = \frac{d}{dt}(20.0t) - \frac{d}{dt}(5.0t^2) = 20.0 - 2(5.0)t = 20.0 - 10.0t.

  2. Evaluate components at t=3.0 st = 3.0\text{ s}: vx(3.0)=6.0 m/sv_x(3.0) = 6.0\text{ m/s} and vy(3.0)=20.0−10.0(3.0)=−10.0 m/sv_y(3.0) = 20.0 - 10.0(3.0) = -10.0\text{ m/s}.

  3. Compute speed: v=vx2+vy2=6.02+(−10.0)2=36.0+100.0=136 m/s≈11.7 m/sv = \sqrt{v_x^2 + v_y^2} = \sqrt{6.0^2 + (-10.0)^2} = \sqrt{36.0 + 100.0} = \sqrt{136}\text{ m/s} \approx 11.7\text{ m/s}.

  4. Calculate kinetic energy: Ek=12(0.50 kg)(136 m2/s2)=34.0 JE_k = \frac{1}{2}(0.50\text{ kg})(136\text{ m}^2/\text{s}^2) = 34.0\text{ J}.

Final answer

Instantaneous speed: 11.7 m/s11.7\text{ m/s}; Kinetic energy: 34.0 J34.0\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice differentiating polynomial terms by writing out the multiplication step (n⋅a)(n \cdot a) explicitly.

  • Check units and dimensions of your derived velocity expressions to catch missing constant factors.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to square the velocity in the kinetic energy formula, computing KE = (1/2)mv instead of KE = (1/2)mv².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    vx=6.0 m/s  ⟹  vy=20.0−10.0(3.0)=−10.0 m/sv_x = 6.0\text{ m/s} \implies v_y = 20.0 - 10.0(3.0) = -10.0\text{ m/s}

  2. Step 2

    v=6.02+(−10.0)2=136≈11.7 m/sv = \sqrt{6.0^2 + (-10.0)^2} = \sqrt{136} \approx 11.7\text{ m/s}

  3. Step 3

    KE=12mv  ⟹  KE=(12)(0.50)(11.7)=2.9 JKE = \frac{1}{2}mv \implies KE = \left(\frac{1}{2}\right)(0.50)(11.7) = 2.9\text{ J}

    Correct

    KE=12mv2=12(0.50 kg)(136 m2/s2)=34.0 JKE = \frac{1}{2}mv^2 = \frac{1}{2}(0.50\text{ kg})(136\text{ m}^2/\text{s}^2) = 34.0\text{ J}

    You wrote the kinetic energy formula as 12mv\frac{1}{2}mv rather than 12mv2\frac{1}{2}mv^2. Because the velocity magnitude must be squared, the kinetic energy is 12(0.50)(136)=34.0 J\frac{1}{2}(0.50)(136) = 34.0\text{ J}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly found the derivatives of the position components with respect to time.

You correctly substituted t=3.0 st = 3.0\text{ s} to find the velocity components.

You properly computed the magnitude of the velocity vector using the Pythagorean theorem.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula recall error

You omitted the exponent 22 on the speed term when calculating kinetic energy.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated linear momentum (p=mvp = mv) or a half-momentum expression with kinetic energy (KE=12mv2KE = \frac{1}{2}mv^2). Always check the physical dimensions: energy requires mass times velocity squared (kg⋅m2/s2=J\text{kg}\cdot\text{m}^2/\text{s}^2 = \text{J}), whereas 12mv\frac{1}{2}mv yields units of momentum (kg⋅m/s\text{kg}\cdot\text{m/s} or N⋅s\text{N}\cdot\text{s}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Kinetic Energy Definition
  • Kinetic energy is quadratic in speed: KE=12mv2KE = \frac{1}{2}mv^2.

  • Always write down the exponent 22 on vv before plugging in numerical values.

Exact $v^2$ Shortcut
  • From v=vx2+vy2v = \sqrt{v_x^2 + v_y^2}, squaring gives v2=vx2+vy2v^2 = v_x^2 + v_y^2 directly.

  • Use v2=136 m2/s2v^2 = 136\text{ m}^2/\text{s}^2 directly in KE=12mv2KE = \frac{1}{2}mv^2 to avoid rounding error.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the standard kinetic energy formula: KE=12mv2KE = \frac{1}{2}mv^2.

  2. Substitute m=0.50 kgm = 0.50\text{ kg} and v2=136 m2/s2v^2 = 136\text{ m}^2/\text{s}^2: KE=12(0.50 kg)(136 m2/s2)KE = \frac{1}{2}(0.50\text{ kg})(136\text{ m}^2/\text{s}^2).

  3. Multiply to obtain the final value: KE=34.0 JKE = 34.0\text{ J}.

Final answer

Instantaneous speed: 11.7 m/s11.7\text{ m/s}; Kinetic energy: 34.0 J34.0\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check units when writing energy formulas: ensure terms contain velocity squared to match Joules.

  • Practice using v2=vx2+vy2v^2 = v_x^2 + v_y^2 directly when computing kinetic energy from component velocities.

Lock it in

Similar question

01

A particle moves along a straight line with position x(t)=4.0t3−5.0t+2.0x(t) = 4.0t^3 - 5.0t + 2.0, where xx is in meters and tt is in seconds. Find its instantaneous velocity at t=2.0 st = 2.0\text{ s}.

Answer

43 m/s43\text{ m/s}. Differentiate position to find velocity: v(t)=dxdt=12.0t2−5.0v(t) = \frac{dx}{dt} = 12.0t^2 - 5.0. Substitute t=2.0 st = 2.0\text{ s}: v(2.0)=12.0(2.0)2−5.0=48.0−5.0=43 m/sv(2.0) = 12.0(2.0)^2 - 5.0 = 48.0 - 5.0 = 43\text{ m/s}.

02

A 2.0 kg2.0\text{ kg} body moves in the xyxy-plane with position vector r⃗(t)=(3.0t2)i^+(4.0t)j^\vec{r}(t) = (3.0t^2)\hat{i} + (4.0t)\hat{j}, with distances in meters and tt in seconds. Determine its speed and kinetic energy at t=1.0 st = 1.0\text{ s}.

Answer

Speed: 7.2 m/s7.2\text{ m/s}; Kinetic energy: 52 J52\text{ J}. Differentiate to find v⃗(t)=(6.0t)i^+4.0j^\vec{v}(t) = (6.0t)\hat{i} + 4.0\hat{j}. At t=1.0 st = 1.0\text{ s}, v⃗=6.0i^+4.0j^ m/s\vec{v} = 6.0\hat{i} + 4.0\hat{j}\text{ m/s}. Speed is v=6.02+4.02=52≈7.21 m/sv = \sqrt{6.0^2 + 4.0^2} = \sqrt{52} \approx 7.21\text{ m/s}. Kinetic energy is Ek=12mv2=12(2.0)(52)=52 JE_k = \frac{1}{2}mv^2 = \frac{1}{2}(2.0)(52) = 52\text{ J}.

03

A model rocket has a position vector r⃗(t)=(8.0t)i^+(30.0t−5.0t2)j^ m\vec{r}(t) = (8.0t)\hat{i} + (30.0t - 5.0t^2)\hat{j}\text{ m}. At what time tt is the rocket moving purely horizontally, and what is its kinetic energy at that instant if its mass is 0.40 kg0.40\text{ kg}?

Answer

t=3.0 st = 3.0\text{ s}; Kinetic energy: 12.8 J12.8\text{ J}. Velocity is v⃗(t)=8.0i^+(30.0−10.0t)j^\vec{v}(t) = 8.0\hat{i} + (30.0 - 10.0t)\hat{j}. Motion is purely horizontal when vy(t)=0v_y(t) = 0, giving 30.0−10.0t=0  ⟹  t=3.0 s30.0 - 10.0t = 0 \implies t = 3.0\text{ s}. At this time, v⃗=8.0i^ m/s\vec{v} = 8.0\hat{i}\text{ m/s} so v=8.0 m/sv = 8.0\text{ m/s}. Thus Ek=12(0.40)(8.02)=12.8 JE_k = \frac{1}{2}(0.40)(8.0^2) = 12.8\text{ J}.

Loading workspace…