Resources
In human visual phototransduction, the conventional boundary separating ultraviolet radiation from visible violet light is defined at a threshold wavelength of , while the boundary separating red visible light from near-infrared is defined at . (a) Calculate the exact threshold frequencies and corresponding to these two boundaries using . (b) If an excimer laser emits photons of frequency , determine whether this beam lies strictly within the visible domain or has crossed the boundary into the ultraviolet regime.
Answer and steps
Final answer
(a) and ; (b) Visible violet domain (since , )
Steps
Part (a): Calculating the Boundary Frequencies
The relationship between the speed of light , frequency , and wavelength in a vacuum is given by the wave speed equation:
First, convert the boundary wavelengths from nanometers () to meters ():
Now, compute the corresponding threshold frequency for each boundary using :
-
Ultraviolet / Visible Violet Boundary ():
-
Visible Red / Infrared Boundary ():
Part (b): Classifying the Laser Emission
To classify the radiation emitted at , compare it to the visible frequency range:
Because wavelength and frequency are inversely related ():
- Higher frequencies () correspond to shorter wavelengths (), which define the ultraviolet (UV) region.
- Lower frequencies down to correspond to the visible spectrum.
Comparing the values:
Alternatively, calculating the equivalent wavelength gives:
Since (and ), the photon has not crossed into the ultraviolet regime; it lies strictly within the visible domain at the deep violet edge.
Typical errors
01 The student misremembers the relationship between frequency, wavelength, and regime, concluding that higher frequency corresponds to infrared rather than ultraviolet or reversing the threshold comparison.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
Because is very close to and exceeds , the beam has crossed the boundary into the ultraviolet regime.
CorrectBecause , the beam lies strictly within the visible domain.
To enter the ultraviolet spectrum, the frequency must strictly exceed the boundary frequency (, corresponding to ). Because , the light remains on the visible violet side of the threshold.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the wave speed relationship to convert wavelengths into frequencies.
You handled unit prefixes accurately by converting nanometers to meters.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou treated proximity to a threshold or exceeding an unrelated number as crossing the boundary, rather than checking the strict inequality .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou did not apply the exact mathematical inequality governing spectral regimes: ultraviolet light requires (or ), so a frequency below remains strictly inside the visible spectrum.
REASONING PATH
Your ACEpath teacher’s suggested approach- Strict Spectral Inequality
For a boundary wavelength and threshold frequency , crossing into the higher-energy (shorter wavelength) regime requires , not merely being close to .
Always compare the test value directly to the boundary value using an inequality ( or ) before drawing a categorical conclusion.
CORRECTED PATH
ACEpath Teacher's DemonstrationState the frequency interval defining the visible domain: .
Compare the laser frequency to the upper boundary: .
Conclude that because the frequency does not exceed , the beam lies strictly within the visible domain.
The beam lies strictly within the visible domain.
02 The student fails to convert nanometers to meters by omitting 10^-9, resulting in threshold frequencies that are nine orders of magnitude too small.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You did not convert the wavelength from nanometers to meters. Since , the denominator must be .
- Step 2Correct
You omitted the factor of here as well, resulting in a value that is times too small.
- Step 3
is much greater than , so the beam has crossed the boundary into the ultraviolet regime.
Correct, so the beam lies strictly within the visible domain.
Your comparison followed logically from your erroneous frequency in Step 1, but comparing against the correct threshold shows that , meaning the beam is still inside the visible violet range.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recalled the relationship between wave speed, frequency, and wavelength ().
You performed the numerical division accurately for the base digits.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou substituted raw numerical wavelength values in nanometers directly into an equation where the speed of light is in meters per second.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOverlooking unit consistency before substituting values into SI wave formulas. Whenever speed is expressed in , wavelength must be converted to base meters () using .
REASONING PATH
Your ACEpath teacher’s suggested approach- Unit Alignment Check
In , if is in and is in (), must be in meters ().
Always convert to by multiplying by before computing.
- Visible Light Frequency Scale
Optical frequencies of visible light are typically on the order of hundreds of terahertz ().
If your calculated optical frequency is around (radio band), immediately check for missing or factors.
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert boundary wavelengths to SI units: and .
Compute boundary frequencies: , and .
Compare the laser frequency to the visible band: since , the laser is within the visible spectrum (violet).
(a) and ; (b) Visible violet domain
03 The student multiplies the speed of light by the wavelength instead of dividing, using f = c * λ.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You used the formula rather than rearranging into . Multiplying speed by wavelength yields units of , not ().
- Step 2Correct
You repeated the multiplication for the red/infrared boundary instead of dividing by .
- Step 3
The visible range is to . Since is much larger than , the laser has crossed into the ultraviolet regime.
CorrectSince , the laser lies strictly within the visible domain.
Your comparison followed logically from your calculated frequencies, but because those threshold values were incorrect, your conclusion that the beam crossed into the ultraviolet regime is incorrect.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recalled and applied the metric prefix conversion to both boundary wavelengths.
You recognized that classifying the laser requires comparing its frequency against the boundary frequencies.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou wrote instead of solving for .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated wave speed, frequency, and wavelength as a direct product rather than using the fundamental wave relationship , which requires division to isolate frequency.
REASONING PATH
Your ACEpath teacher’s suggested approach- Rearranging the Wave Speed Equation
and
Always write down the base equation first, then algebraically divide both sides by to isolate before substituting numerical values.
- Dimensional Analysis Check
Check your units: multiplying gives , signaling that the variables were combined incorrectly.
CORRECTED PATH
ACEpath Teacher's DemonstrationDivide the speed of light by the violet boundary wavelength: .
Divide the speed of light by the red boundary wavelength: .
Define the visible range in frequency: .
Compare the laser frequency : since , it remains below the UV threshold and lies within the visible violet band.
(a) and ; (b) Visible violet domain
Lock it in
What is the relationship between wavelength and frequency for electromagnetic waves in a vacuum?
, meaning frequency and wavelength are inversely proportional: shorter wavelengths correspond to higher frequencies.
Similar question
A green laser emits light at . Using , calculate its frequency and confirm whether it falls inside the visible range ( to ).
Answer
. Since , it lies strictly within the visible spectrum.
An optical communication diode emits radiation at frequency . Given the visible-infrared threshold at (), determine whether this emission is visible red or infrared.
Answer
Since , its frequency is lower than the red cutoff (equivalent to ), so the emission lies in the infrared regime.
A tunable laser sweeps across frequencies near the UV-visible cutoff at . If the laser frequency is increased from to , identify the exact threshold frequency at which the beam transitions into the ultraviolet regime, and state the regime for both endpoints.
Answer
The threshold frequency is . At , the beam is visible violet. At , the beam has crossed into the ultraviolet regime.