Resources

A solid cylindrical elastomer shock-absorber bushing of unstressed height H0=120.0 mmH_0 = 120.0\text{ mm} and unstressed outer diameter D0=60.0 mmD_0 = 60.0\text{ mm} is positioned vertically along the zz-axis between two parallel rigid plates. A compressive axial force of magnitude Fz=24.0 kNF_z = 24.0\text{ kN} is applied along the negative zz-direction, compressing the bushing elastically by an axial displacement of ΔH=−3.60 mm\Delta H = -3.60\text{ mm}. The material exhibits an elastic Young's modulus of E=2.50×107 PaE = 2.50 \times 10^7\text{ Pa} and a Poisson's ratio of ν=0.450\nu = 0.450. Using standard mechanics of materials sign conventions (where tensile strain is positive and compressive strain is negative): (a) state the signed axial strain εz\varepsilon_z, (b) calculate the signed transverse lateral strain εx=εy\varepsilon_x = \varepsilon_y, and (c) find the resulting expanded diameter DfinalD_{\text{final}} of the bushing under full load.

Answer and steps

Final answer

(a) εz=−0.0300\varepsilon_z = -0.0300; (b) εx=εy=+0.0135\varepsilon_x = \varepsilon_y = +0.0135; (c) Dfinal=60.81 mmD_{\text{final}} = 60.81\text{ mm}

Steps

01

Calculate the Signed Axial Strain (εz\varepsilon_z)

Normal strain along an axis is defined as the change in length divided by the original unstressed length:

εz=ΔHH0\varepsilon_z = \frac{\Delta H}{H_0}

Given:

  • Initial height H0=120.0 mmH_0 = 120.0\text{ mm}
  • Axial displacement ΔH=−3.60 mm\Delta H = -3.60\text{ mm} (negative indicates compression)

Substitute the values:

εz=−3.60 mm120.0 mm=−0.0300\varepsilon_z = \frac{-3.60\text{ mm}}{120.0\text{ mm}} = -0.0300

The negative sign confirms compressive axial strain.


02

Calculate the Lateral Transverse Strain (εx=εy\varepsilon_x = \varepsilon_y)

When an isotropic material is compressed along one axis, it bulges outwards laterally. Poisson's ratio (ν\nu) relates transverse strain to axial strain under uniaxial loading by:

ν=−εtransverseεaxial=−εxεz\nu = -\frac{\varepsilon_{\text{transverse}}}{\varepsilon_{\text{axial}}} = -\frac{\varepsilon_x}{\varepsilon_z}

Rearranging to solve for the lateral strain εx\varepsilon_x (which is equal to εy\varepsilon_y for a cylinder due to symmetry):

εx=εy=−νεz\varepsilon_x = \varepsilon_y = -\nu \varepsilon_z

Substitute ν=0.450\nu = 0.450 and εz=−0.0300\varepsilon_z = -0.0300:

εx=−(0.450)(−0.0300)=+0.0135\varepsilon_x = -(0.450)(-0.0300) = +0.0135

The positive sign indicates tensile (expansive) strain in the radial and circumferential directions.


03

Determine the Final Expanded Diameter (DfinalD_{\text{final}})

The lateral strain defines the relative fractional change in diameter:

εx=ΔDD0\varepsilon_x = \frac{\Delta D}{D_0}

Solving for the change in diameter ΔD\Delta D:

ΔD=εx⋅D0\Delta D = \varepsilon_x \cdot D_0

Substitute εx=+0.0135\varepsilon_x = +0.0135 and D0=60.0 mmD_0 = 60.0\text{ mm}:

ΔD=(+0.0135)(60.0 mm)=+0.81 mm\Delta D = (+0.0135)(60.0\text{ mm}) = +0.81\text{ mm}

Add this expansion to the original diameter to find the final diameter under load:

Dfinal=D0+ΔD=60.0 mm+0.81 mm=60.81 mmD_{\text{final}} = D_0 + \Delta D = 60.0\text{ mm} + 0.81\text{ mm} = 60.81\text{ mm}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets the negative sign in the Poisson's ratio definition, resulting in a negative lateral strain and an incorrect reduction in diameter.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    εz=ΔHH0=−3.60 mm120.0 mm=−0.0300\varepsilon_z = \frac{\Delta H}{H_0} = \frac{-3.60\text{ mm}}{120.0\text{ mm}} = -0.0300

  2. Step 2

    εx=ν∗εz=0.450∗(−0.0300)=−0.0135\varepsilon_x = \nu * \varepsilon_z = 0.450 * (-0.0300) = -0.0135

    Correct

    εx=−νεz=−(0.450)(−0.0300)=+0.0135\varepsilon_x = -\nu \varepsilon_z = -(0.450)(-0.0300) = +0.0135

    You omitted the negative sign in Poisson's ratio formula. Under uniaxial loading, lateral strain is related to axial strain by εx=−νεz\varepsilon_x = -\nu \varepsilon_z. Compressing a cylinder vertically causes it to expand laterally, so εx\varepsilon_x must be positive.

  3. Step 3

    ΔD=εx∗D0=−0.0135∗60.0 mm=−0.810 mm  ⟹  Dfinal=D0+ΔD=60.0 mm−0.810 mm=59.19 mm\Delta D = \varepsilon_x * D_0 = -0.0135 * 60.0\text{ mm} = -0.810\text{ mm} \implies D_{\text{final}} = D_0 + \Delta D = 60.0\text{ mm} - 0.810\text{ mm} = 59.19\text{ mm}

    Correct

    ΔD=εxD0=(+0.0135)(60.0 mm)=+0.81 mm  ⟹  Dfinal=D0+ΔD=60.0 mm+0.81 mm=60.81 mm\Delta D = \varepsilon_x D_0 = (+0.0135)(60.0\text{ mm}) = +0.81\text{ mm} \implies D_{\text{final}} = D_0 + \Delta D = 60.0\text{ mm} + 0.81\text{ mm} = 60.81\text{ mm}

    Your method for calculating diameter change and final diameter from lateral strain was logically sound, but the numerical answer was affected by the negative lateral strain from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the definition of axial normal strain εz=ΔHH0\varepsilon_z = \frac{\Delta H}{H_0} and preserved the negative sign for compression.

You correctly identified the relationship connecting lateral strain to total diameter change and added that change to D0D_0.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of negative sign in Poisson's ratio definition

You wrote εx=νεz\varepsilon_x = \nu \varepsilon_z instead of εx=−νεz\varepsilon_x = -\nu \varepsilon_z, forgetting the negative sign that accounts for opposite transverse deformation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated Poisson's ratio as a direct proportionality factor rather than a ratio of opposite signed deformations. Because Poisson's ratio ν\nu is defined positive for conventional materials, the definition carries an explicit negative sign, ν=−εtransverseεaxial\nu = -\frac{\varepsilon_{\text{transverse}}}{\varepsilon_{\text{axial}}}, ensuring that axial compression ( εz<0 \,\varepsilon_z < 0\,) yields lateral expansion ( εtransverse>0 \,\varepsilon_{\text{transverse}} > 0\,).

REASONING PATH
Your ACEpath teacher’s suggested approach
Poisson's Ratio Definition
  • Under uniaxial stress along the zz-axis, ν=−εtransverseεaxial\nu = -\frac{\varepsilon_{\text{transverse}}}{\varepsilon_{\text{axial}}}, so εx=εy=−νεz\varepsilon_x = \varepsilon_y = -\nu \varepsilon_z.

  • Always write down the explicit negative sign before substituting values: εx=−νεz\varepsilon_x = -\nu \varepsilon_z.

Physical Reality Check
  • Compressing a solid rubber cylinder along its height forces the material outward, increasing its diameter.

  • Verify whether the loaded diameter should be larger or smaller than the original diameter before finalizing your answer.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the standard definition of Poisson's ratio with its negative sign: εx=−νεz=−(0.450)(−0.0300)=+0.0135\varepsilon_x = -\nu \varepsilon_z = -(0.450)(-0.0300) = +0.0135.

  2. Compute the diametral expansion: ΔD=εxD0=(+0.0135)(60.0 mm)=+0.81 mm\Delta D = \varepsilon_x D_0 = (+0.0135)(60.0\text{ mm}) = +0.81\text{ mm}.

  3. Add the diametral change to the unstressed diameter: Dfinal=D0+ΔD=60.0 mm+0.81 mm=60.81 mmD_{\text{final}} = D_0 + \Delta D = 60.0\text{ mm} + 0.81\text{ mm} = 60.81\text{ mm}.

Final answer

(a) εz=−0.0300\varepsilon_z = -0.0300; (b) εx=εy=+0.0135\varepsilon_x = \varepsilon_y = +0.0135; (c) Dfinal=60.81 mmD_{\text{final}} = 60.81\text{ mm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the governing definition ν=−εtransverseεaxial\nu = -\frac{\varepsilon_{\text{transverse}}}{\varepsilon_{\text{axial}}} and note why the negative sign is mandatory.

  • Practice checking the physical direction of deformation (e.g., squishing vertically means bulging horizontally) to catch sign errors immediately.

OverviewACEpath Teacher's Diagnosis

02 The student ignores the negative sign on compressive axial strain, concluding that axial strain is positive, which leads to negative lateral strain and a contracted diameter.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    εz=∣ΔH∣H0=3.60 mm120.0 mm=0.0300\varepsilon_z = \frac{|\Delta H|}{H_0} = \frac{3.60\text{ mm}}{120.0\text{ mm}} = 0.0300

    Correct

    εz=ΔHH0=−3.60 mm120.0 mm=−0.0300\varepsilon_z = \frac{\Delta H}{H_0} = \frac{-3.60\text{ mm}}{120.0\text{ mm}} = -0.0300

    You calculated the magnitude of the strain, but compression requires a negative sign under standard sign conventions, so εz\varepsilon_z must be −0.0300-0.0300.

  2. Step 2

    εx=−ν⋅εz=−0.450⋅0.0300=−0.0135\varepsilon_x = -\nu \cdot \varepsilon_z = -0.450 \cdot 0.0300 = -0.0135

    Correct

    εx=−ν⋅εz=−(0.450)(−0.0300)=+0.0135\varepsilon_x = -\nu \cdot \varepsilon_z = -(0.450)(-0.0300) = +0.0135

    You correctly stated the relationship εx=−νεz\varepsilon_x = -\nu \varepsilon_z, but substituting the positive value of εz\varepsilon_z from Step 1 carried forward the sign error and produced a negative lateral strain.

  3. Step 3

    ΔD=−0.0135⋅60.0 mm=−0.810 mm  ⟹  Dfinal=60.0 mm−0.810 mm=59.19 mm\Delta D = -0.0135 \cdot 60.0\text{ mm} = -0.810\text{ mm} \implies D_{\text{final}} = 60.0\text{ mm} - 0.810\text{ mm} = 59.19\text{ mm}

    Correct

    ΔD=εx⋅D0=(+0.0135)(60.0 mm)=+0.81 mm  ⟹  Dfinal=60.0 mm+0.81 mm=60.81 mm\Delta D = \varepsilon_x \cdot D_0 = (+0.0135)(60.0\text{ mm}) = +0.81\text{ mm} \implies D_{\text{final}} = 60.0\text{ mm} + 0.81\text{ mm} = 60.81\text{ mm}

    You correctly computed the diameter change from your lateral strain, but because of the sign error, the cylinder contracted instead of bulging outward under compression.

WHAT YOU DID WELL
Compliments from Your Teacher

You used the correct definition of normal strain as change in length over initial length.

You applied the correct Poisson's ratio formula εx=−νεz\varepsilon_x = -\nu \varepsilon_z relating lateral and axial strains.

You correctly calculated the final dimension using the product of lateral strain and original diameter.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign convention omission in compressive strain

You introduced an absolute value ∣ΔH∣|\Delta H| when calculating the axial strain εz\varepsilon_z, dropping the negative sign for compressive deformation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated compressive strain as an unsigned magnitude rather than a signed quantity. In mechanics of materials, Poisson's ratio formula ν=−εlatεaxial\nu = -\frac{\varepsilon_{\text{lat}}}{\varepsilon_{\text{axial}}} is built around the signed convention where compression is negative and tension is positive. When the negative sign of εaxial\varepsilon_{\text{axial}} is omitted, the formula flips the physical behavior, predicting lateral shrinkage during axial compression.

REASONING PATH
Your ACEpath teacher’s suggested approach
Sign Convention for Normal Strain
  • Tensile strain (elongation) is positive (++); compressive strain (shortening) is negative (−-).

  • Always substitute compressive displacements as negative values into ε=ΔLL0\varepsilon = \frac{\Delta L}{L_0}.

Physical Reality Check with Poisson's Ratio
  • For ordinary materials with ν>0\nu > 0, axial compression causes lateral expansion, meaning εaxial<0  ⟹  εlat>0\varepsilon_{\text{axial}} < 0 \implies \varepsilon_{\text{lat}} > 0.

  • Verify that your resulting lateral strain produces an increase in cross-sectional dimensions when an object is squashed.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set signed axial strain: εz=ΔHH0=−3.60 mm120.0 mm=−0.0300\varepsilon_z = \frac{\Delta H}{H_0} = \frac{-3.60\text{ mm}}{120.0\text{ mm}} = -0.0300

  2. Calculate lateral strain: εx=−νεz=−(0.450)(−0.0300)=+0.0135\varepsilon_x = -\nu \varepsilon_z = -(0.450)(-0.0300) = +0.0135

  3. Calculate diameter expansion: ΔD=εx⋅D0=(+0.0135)(60.0 mm)=+0.81 mm\Delta D = \varepsilon_x \cdot D_0 = (+0.0135)(60.0\text{ mm}) = +0.81\text{ mm}

  4. Find final diameter: Dfinal=D0+ΔD=60.0 mm+0.81 mm=60.81 mmD_{\text{final}} = D_0 + \Delta D = 60.0\text{ mm} + 0.81\text{ mm} = 60.81\text{ mm}

Final answer

(a) εz=−0.0300\varepsilon_z = -0.0300; (b) εx=εy=+0.0135\varepsilon_x = \varepsilon_y = +0.0135; (c) Dfinal=60.81 mmD_{\text{final}} = 60.81\text{ mm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Avoid using absolute value bars on displacement ΔL\Delta L unless you are asked purely for an unsigned magnitude.

  • Perform a physical check whenever you finish a Poisson's ratio problem: compressing a cylinder axially must make it expand radially.

OverviewACEpath Teacher's Diagnosis

03 The student divides by Poisson's ratio instead of multiplying by it when relating lateral strain to axial strain.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    εz=−3.60 mm/120.0 mm=−0.0300\varepsilon_z = -3.60\text{ mm} / 120.0\text{ mm} = -0.0300

  2. Step 2

    εx=−εzν=−(−0.0300)0.450=+0.0667\varepsilon_x = \frac{-\varepsilon_z}{\nu} = \frac{-(-0.0300)}{0.450} = +0.0667

    Correct

    εx=−νεz=−(0.450)(−0.0300)=+0.0135\varepsilon_x = -\nu \varepsilon_z = -(0.450)(-0.0300) = +0.0135

    Poisson's ratio is defined as ν=−εtransverseεaxial\nu = -\frac{\varepsilon_{\text{transverse}}}{\varepsilon_{\text{axial}}}. Solving for lateral strain requires multiplying axial strain by −ν-\nu, not dividing by it.

  3. Step 3

    ΔD=0.0667×60.0 mm=4.00 mm  ⟹  Dfinal=60.0 mm+4.00 mm=64.00 mm\Delta D = 0.0667 \times 60.0\text{ mm} = 4.00\text{ mm} \implies D_{\text{final}} = 60.0\text{ mm} + 4.00\text{ mm} = 64.00\text{ mm}

    Correct

    ΔD=εxD0=(+0.0135)(60.0 mm)=+0.81 mm  ⟹  Dfinal=60.0 mm+0.81 mm=60.81 mm\Delta D = \varepsilon_x D_0 = (+0.0135)(60.0\text{ mm}) = +0.81\text{ mm} \implies D_{\text{final}} = 60.0\text{ mm} + 0.81\text{ mm} = 60.81\text{ mm}

    Your method for finding ΔD\Delta D and the final diameter was logically sound, but the numerical values carry over the incorrect lateral strain from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the axial compressive strain εz\varepsilon_z using the initial height and displacement.

You tracked the negative sign convention for compressive deformation consistently.

You correctly related transverse strain to dimensional change to obtain the final diameter.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula inversion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You rearranged the definition of Poisson's ratio ν=−εlatεaxial\nu = -\frac{\varepsilon_{\text{lat}}}{\varepsilon_{\text{axial}}} incorrectly into εlat=−εaxialν\varepsilon_{\text{lat}} = -\frac{\varepsilon_{\text{axial}}}{\nu} instead of isolating the numerator as εlat=−νεaxial\varepsilon_{\text{lat}} = -\nu \varepsilon_{\text{axial}}. Because ν<1\nu < 1, dividing instead of multiplying produced a lateral expansion that was unrealistically large.

REASONING PATH
Your ACEpath teacher’s suggested approach
Poisson's Ratio Definition
  • ν=−εtransverseεaxial\nu = -\frac{\varepsilon_{\text{transverse}}}{\varepsilon_{\text{axial}}}

  • Multiply both sides by −εaxial-\varepsilon_{\text{axial}} to isolate lateral strain: εtransverse=−νεaxial\varepsilon_{\text{transverse}} = -\nu \varepsilon_{\text{axial}}.

Physical Reality Check
  • For ordinary stable isotropic materials, 0<ν≤0.50 < \nu \le 0.5.

  • Since ν<1\nu < 1, the magnitude of lateral strain ∣εtransverse∣|\varepsilon_{\text{transverse}}| must always be strictly smaller than the magnitude of axial strain ∣εaxial∣|\varepsilon_{\text{axial}}| under uniaxial loading.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the corrected lateral strain formula: εx=−νεz=−(0.450)(−0.0300)=+0.0135\varepsilon_x = -\nu \varepsilon_z = -(0.450)(-0.0300) = +0.0135.

  2. Calculate the transverse diameter change: ΔD=εx⋅D0=(+0.0135)(60.0 mm)=+0.81 mm\Delta D = \varepsilon_x \cdot D_0 = (+0.0135)(60.0\text{ mm}) = +0.81\text{ mm}.

  3. Compute the final diameter: Dfinal=D0+ΔD=60.0 mm+0.81 mm=60.81 mmD_{\text{final}} = D_0 + \Delta D = 60.0\text{ mm} + 0.81\text{ mm} = 60.81\text{ mm}.

Final answer

(a) εz=−0.0300\varepsilon_z = -0.0300; (b) εx=εy=+0.0135\varepsilon_x = \varepsilon_y = +0.0135; (c) Dfinal=60.81 mmD_{\text{final}} = 60.81\text{ mm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the algebraic rearrangement of ratio definitions so that numerators are isolated by multiplication.

  • Perform a magnitude check after computing strains: verify that lateral strain is smaller in magnitude than axial strain whenever ν<1\nu < 1.

Lock it in

Similar question

01

A cylindrical polyurethane mount with unstressed height H0=80.0 mmH_0 = 80.0\text{ mm} and diameter D0=40.0 mmD_0 = 40.0\text{ mm} is compressed axially by ΔH=−2.00 mm\Delta H = -2.00\text{ mm}. If Poisson's ratio is ν=0.400\nu = 0.400, find the lateral strain εx\varepsilon_x and the loaded diameter DfinalD_{\text{final}}.

Answer

εz=−2.00 mm80.0 mm=−0.0250\varepsilon_z = \frac{-2.00\text{ mm}}{80.0\text{ mm}} = -0.0250. Lateral strain εx=−νεz=−(0.400)(−0.0250)=+0.0100\varepsilon_x = -\nu \varepsilon_z = -(0.400)(-0.0250) = +0.0100. Expansion ΔD=εxD0=(+0.0100)(40.0 mm)=+0.40 mm\Delta D = \varepsilon_x D_0 = (+0.0100)(40.0\text{ mm}) = +0.40\text{ mm}. Final diameter Dfinal=40.0 mm+0.40 mm=40.40 mmD_{\text{final}} = 40.0\text{ mm} + 0.40\text{ mm} = 40.40\text{ mm}.

02

A square rubber block (50.0 mm×50.0 mm50.0\text{ mm} \times 50.0\text{ mm} cross section, length L0=150.0 mmL_0 = 150.0\text{ mm}) is pulled in tension along its length with an axial strain of εaxial=+0.0600\varepsilon_{\text{axial}} = +0.0600. If Poisson's ratio is ν=0.480\nu = 0.480, calculate the signed transverse strain and the new side dimension of the cross section.

Answer

Transverse strain εtransverse=−νεaxial=−(0.480)(+0.0600)=−0.0288\varepsilon_{\text{transverse}} = -\nu \varepsilon_{\text{axial}} = -(0.480)(+0.0600) = -0.0288. Change in side width Δw=(−0.0288)(50.0 mm)=−1.44 mm\Delta w = (-0.0288)(50.0\text{ mm}) = -1.44\text{ mm}. New side dimension wfinal=50.0 mm−1.44 mm=48.56 mmw_{\text{final}} = 50.0\text{ mm} - 1.44\text{ mm} = 48.56\text{ mm}.

03

A solid metal tie-rod of initial diameter D0=20.0 mmD_0 = 20.0\text{ mm} and length L0=1.00 mL_0 = 1.00\text{ m} is subjected to a tensile force. The measured reduction in diameter is ΔD=−0.0036 mm\Delta D = -0.0036\text{ mm}. Given ν=0.300\nu = 0.300 and Young's modulus E=200 GPaE = 200\text{ GPa}, determine: (a) the transverse strain εtransverse\varepsilon_{\text{transverse}}, (b) the axial strain εaxial\varepsilon_{\text{axial}}, and (c) the elongation ΔL\Delta L.

Answer

(a) εtransverse=−0.0036 mm20.0 mm=−1.80×10−4\varepsilon_{\text{transverse}} = \frac{-0.0036\text{ mm}}{20.0\text{ mm}} = -1.80 \times 10^{-4}. (b) Using εtransverse=−νεaxial\varepsilon_{\text{transverse}} = -\nu \varepsilon_{\text{axial}}, εaxial=−εtransverseν=−−1.80×10−40.300=+6.00×10−4\varepsilon_{\text{axial}} = -\frac{\varepsilon_{\text{transverse}}}{\nu} = -\frac{-1.80 \times 10^{-4}}{0.300} = +6.00 \times 10^{-4}. (c) ΔL=εaxialL0=(+6.00×10−4)(1000 mm)=+0.600 mm\Delta L = \varepsilon_{\text{axial}} L_0 = (+6.00 \times 10^{-4})(1000\text{ mm}) = +0.600\text{ mm}.

Loading workspace…