Resources

An aerospace test vehicle of total mass M=2.40 metric tonsM = 2.40\text{ metric tons} (1 metric ton=1.00×103 kg1\text{ metric ton} = 1.00 \times 10^3\text{ kg}) cruises in deep space far from any celestial gravitational bodies at a constant velocity of v0=4.50 km/sv_0 = 4.50\text{ km/s} along the +x+x-axis. A small onboard probe of mass m=125 lbm = 125\text{ lb} (1 lb=0.4536 kg1\text{ lb} = 0.4536\text{ kg}) is released unattached inside an interior payload bay of length L=8.50 mL = 8.50\text{ m}. (a) State Newton's first law and determine the net external force ΣF⃗\Sigma \vec{F} acting on the probe while the vehicle cruises at constant velocity. (b) Convert the probe's mass to standard SI units (kilograms). (c) While the vehicle is cruising, the probe is at rest relative to the bay. An attitude thruster then fires for a duration of Δt=250 ms\Delta t = 250\text{ ms}, exerting a uniform forward thrust of Fthrust=7.20 kNF_{\text{thrust}} = 7.20\text{ kN} on the main vehicle along the +x+x-axis. Because the probe is untethered and frictionless, it experiences no thrust force. Determine the distance Δxrel\Delta x_{\text{rel}} the probe shifts relative to the payload bay during the 250 ms250\text{ ms} burn.

Answer and steps

Final answer

(a) According to Newton's first law, an object continues in its state of rest or uniform motion in a straight line unless acted upon by a net external force; here ΣF⃗=0 N\Sigma \vec{F} = 0\text{ N}, so the probe maintains its constant speed of 4.50 km/s4.50\text{ km/s}. (b) m=56.7 kgm = 56.7\text{ kg}. (c) Δxrel=0.0938 m\Delta x_{\text{rel}} = 0.0938\text{ m} (9.38 cm9.38\text{ cm} backward relative to the bay)

Steps

Part (a): Newton's First Law and Net Force

Newton's first law of motion states that an object remains at rest or continues to move at a constant velocity in a straight line unless acted upon by a net external force: ΣF⃗=0  ⟹  a⃗=0(v⃗=constant)\Sigma \vec{F} = 0 \implies \vec{a} = 0 \quad (\vec{v} = \text{constant})

Since the vehicle cruises through deep space at a constant velocity v⃗0=4.50 km/s i^\vec{v}_0 = 4.50\text{ km/s}\,\hat{i} in the absence of gravity and atmospheric drag, its acceleration is zero. By Newton's first law, the net external force acting on the floating probe is: ΣF⃗=0 N\Sigma \vec{F} = 0\text{ N}


Part (b): Mass Conversion to SI Units

Given that the mass of the probe is m=125 lbm = 125\text{ lb} and 1 lb=0.4536 kg1\text{ lb} = 0.4536\text{ kg}: m=125 lb×0.4536 kg/lb=56.7 kgm = 125\text{ lb} \times 0.4536\text{ kg/lb} = 56.7\text{ kg}


Part (c): Relative Displacement During the Burn

  1. Convert given quantities to standard SI units:

    • Duration of thrust: Δt=250 ms=0.250 s\Delta t = 250\text{ ms} = 0.250\text{ s}
    • Thrust force: Fthrust=7.20 kN=7.20×103 N=7200 NF_{\text{thrust}} = 7.20\text{ kN} = 7.20 \times 10^3\text{ N} = 7200\text{ N}
    • Mass of the vehicle: M=2.40 metric tons=2.40×103 kg=2400 kgM = 2.40\text{ metric tons} = 2.40 \times 10^3\text{ kg} = 2400\text{ kg}
  2. Acceleration of the vehicle: The thrust acts directly on the main vehicle along the +x+x-axis. Applying Newton's second law: aveh=FthrustM=7200 N2400 kg=3.00 m/s2a_{\text{veh}} = \frac{F_{\text{thrust}}}{M} = \frac{7200\text{ N}}{2400\text{ kg}} = 3.00\text{ m/s}^2
  3. Motion in an inertial reference frame:

    • Probe: Because the probe is untethered and experiences no friction or thrust force (ΣFprobe=0\Sigma F_{\text{probe}} = 0), Newton's first law dictates that its velocity remains constant at v0v_0. In time Δt\Delta t, its position changes by: Δxprobe=v0Δt\Delta x_{\text{probe}} = v_0 \Delta t
    • Vehicle: The vehicle accelerates at aveha_{\text{veh}}, so its position changes by: Δxveh=v0Δt+12aveh(Δt)2\Delta x_{\text{veh}} = v_0 \Delta t + \frac{1}{2} a_{\text{veh}} (\Delta t)^2
  4. Relative shift: The displacement of the vehicle ahead of the probe (or equivalently, the probe's backward shift relative to the payload bay) is: Δxrel=Δxveh−Δxprobe=12aveh(Δt)2\Delta x_{\text{rel}} = \Delta x_{\text{veh}} - \Delta x_{\text{probe}} = \frac{1}{2} a_{\text{veh}} (\Delta t)^2 Δxrel=12(3.00 m/s2)(0.250 s)2=12(3.00)(0.0625)=0.09375 m≈0.0938 m(9.38 cm)\Delta x_{\text{rel}} = \frac{1}{2} (3.00\text{ m/s}^2) (0.250\text{ s})^2 = \frac{1}{2} (3.00) (0.0625) = 0.09375\text{ m} \approx 0.0938\text{ m} \quad (9.38\text{ cm})

Relative to the bay, the probe appears to drift toward the rear bulkhead by 0.0938 m0.0938\text{ m} (9.38 cm9.38\text{ cm}).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student uses the probe's mass instead of the vehicle's mass to calculate the acceleration during the burn.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    An object maintains constant velocity unless a net external force acts on it.  ⟹  ΣF=0 N\text{An object maintains constant velocity unless a net external force acts on it.} \implies \Sigma F = 0\text{ N}

  2. Step 2

    m=125×0.4536  ⟹  m=56.7 kgm = 125 \times 0.4536 \implies m = 56.7\text{ kg}

  3. Step 3

    a=Fm=720056.7=127 m/s2a = \frac{F}{m} = \frac{7200}{56.7} = 127\text{ m/s}^2

    Correct

    aveh=FthrustM=7200 N2400 kg=3.00 m/s2a_{\text{veh}} = \frac{F_{\text{thrust}}}{M} = \frac{7200\text{ N}}{2400\text{ kg}} = 3.00\text{ m/s}^2

    The thruster fires on the main aerospace vehicle of mass M=2.40 metric tons=2400 kgM = 2.40\text{ metric tons} = 2400\text{ kg}, not on the untethered probe. By Newton's first law, the probe experiences no thrust force and does not accelerate.

  4. Step 4

    Δt=0.250 s  ⟹  Δxrel=(12)a(Δt)2=(12)(127)(0.250)2=3.97 m\Delta t = 0.250\text{ s} \implies \Delta x_{\text{rel}} = \left(\frac{1}{2}\right)a(\Delta t)^2 = \left(\frac{1}{2}\right)(127)(0.250)^2 = 3.97\text{ m}

    Correct

    Δxrel=12aveh(Δt)2=12(3.00 m/s2)(0.250 s)2=0.0938 m\Delta x_{\text{rel}} = \frac{1}{2}a_{\text{veh}}(\Delta t)^2 = \frac{1}{2}(3.00\text{ m/s}^2)(0.250\text{ s})^2 = 0.0938\text{ m}

    Your kinematic formula for relative displacement is correct, but your numerical result was affected by the incorrect acceleration value from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly stated Newton's first law of motion and deduced that the cruising probe experiences zero net external force.

You accurately converted the probe's mass from pounds to kilograms.

You correctly set up the relative displacement formula Δxrel=12a(Δt)2\Delta x_{\text{rel}} = \frac{1}{2}a(\Delta t)^2 using the correct time conversion.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Wrong System Mass in Newton's Second Law

You divided the thruster force by the probe's mass mm instead of the vehicle's mass MM.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You associated the thruster force with the probe rather than the main vehicle. Since the probe is untethered and floating freely, the thrust force acts entirely on the vehicle hull, accelerating the vehicle while the probe continues cruising at constant velocity by inertia.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify the Object Experiencing the Force
  • When applying Newton's second law a⃗=ΣF⃗m\vec{a} = \frac{\Sigma \vec{F}}{m}, the mass in the denominator must belong specifically to the object or system that the force is physically acting upon.

  • Before calculating acceleration, explicitly ask: which physical body does this force push or pull?

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the vehicle's total mass to kilograms: M=2.40 metric tons=2400 kgM = 2.40\text{ metric tons} = 2400\text{ kg}.

  2. Apply Newton's second law to find the vehicle's forward acceleration: aveh=FthrustM=7200 N2400 kg=3.00 m/s2a_{\text{veh}} = \frac{F_{\text{thrust}}}{M} = \frac{7200\text{ N}}{2400\text{ kg}} = 3.00\text{ m/s}^2.

  3. Substitute aveh=3.00 m/s2a_{\text{veh}} = 3.00\text{ m/s}^2 into the relative displacement equation: Δxrel=12(3.00 m/s2)(0.250 s)2=0.09375 m≈0.0938 m\Delta x_{\text{rel}} = \frac{1}{2}(3.00\text{ m/s}^2)(0.250\text{ s})^2 = 0.09375\text{ m} \approx 0.0938\text{ m}.

Final answer

Δxrel=0.0938 m  (9.38 cm)\Delta x_{\text{rel}} = 0.0938\text{ m} \; (9.38\text{ cm})

NEXT STEPS
Final Takeaways from Your Teacher
  • Always draw or write out a quick system boundary to confirm which object receives the applied force before writing a=Fma = \frac{F}{m}.

  • Practice solving relative motion problems from an external inertial frame to clearly see how Newton's first law keeps untethered objects moving at constant velocity.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to square the time interval in the kinematic displacement formula.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    An object remains at constant velocity unless acted upon by a net force. ΣF=0 N\Sigma F = 0\text{ N}

  2. Step 2

    m=125×0.4536=56.7 kgm = 125 \times 0.4536 = 56.7\text{ kg}

  3. Step 3

    M=2400 kg  ⟹  a=7200/2400=3.00 m/s2M = 2400\text{ kg} \implies a = 7200 / 2400 = 3.00\text{ m/s}^2

  4. Step 4

    Δt=0.250 s  ⟹  Δxrel=(12)aΔt=(12)(3.00)(0.250)=0.375 m\Delta t = 0.250\text{ s} \implies \Delta x_{\text{rel}} = \left(\frac{1}{2}\right) a \Delta t = \left(\frac{1}{2}\right)(3.00)(0.250) = 0.375\text{ m}

    Correct

    Δxrel=12a(Δt)2=12(3.00 m/s2)(0.250 s)2=0.0938 m\Delta x_{\text{rel}} = \frac{1}{2} a (\Delta t)^2 = \frac{1}{2}(3.00\text{ m/s}^2)(0.250\text{ s})^2 = 0.0938\text{ m}

    You wrote the kinematic formula with linear time 12aΔt\frac{1}{2} a \Delta t instead of quadratic time 12a(Δt)2\frac{1}{2} a (\Delta t)^2. The expression 12aΔt\frac{1}{2} a \Delta t has units of speed (m/s\text{m/s}), not distance (m\text{m}).

WHAT YOU DID WELL
Compliments from Your Teacher

You clearly articulated Newton's first law and deduced that the net force on the untethered probe is zero.

You accurately converted units for mass, force, and time into standard SI units.

You applied Newton's second law correctly to determine the vehicle's forward acceleration.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Kinematics formula error (omitted exponent)

You dropped the exponent 22 on time Δt\Delta t in the displacement equation Δx=12a(Δt)2\Delta x = \frac{1}{2} a (\Delta t)^2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the form of kinematic equations or writing them too quickly without checking units. Notice that a⋅Δt=(m/s2)(s)=m/sa \cdot \Delta t = (\text{m/s}^2)(\text{s}) = \text{m/s}, which yields a velocity rather than a displacement.

REASONING PATH
Your ACEpath teacher’s suggested approach
Kinematic Displacement from Rest
  • For constant acceleration starting from rest relative to the frame, Δx=12a(Δt)2\Delta x = \frac{1}{2} a (\Delta t)^2.

  • Always write down the general formula before substituting numbers, ensuring that the time term is squared.

Dimensional Analysis
  • [a][t]2=(m/s2)(s2)=m[a][t]^2 = (\text{m/s}^2)(\text{s}^2) = \text{m}, whereas [a][t]=m/s[a][t] = \text{m/s}.

  • Perform a rapid dimensional check on your formula before calculating to make sure it evaluates to the correct physical dimension.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. The vehicle accelerates forward at a=3.00 m/s2a = 3.00\text{ m/s}^2 while the probe continues at constant velocity by inertia.

  2. The relative shift between the accelerating bay and the floating probe is given by Δxrel=12a(Δt)2\Delta x_{\text{rel}} = \frac{1}{2} a (\Delta t)^2.

  3. Substitute a=3.00 m/s2a = 3.00\text{ m/s}^2 and Δt=0.250 s\Delta t = 0.250\text{ s}:

  4. Δxrel=12(3.00)(0.250)2=12(3.00)(0.0625)=0.09375 m≈0.0938 m\Delta x_{\text{rel}} = \frac{1}{2}(3.00)(0.250)^2 = \frac{1}{2}(3.00)(0.0625) = 0.09375\text{ m} \approx 0.0938\text{ m}.

Final answer

Δxrel=0.0938 m\Delta x_{\text{rel}} = 0.0938\text{ m} (or 9.38 cm9.38\text{ cm} backward relative to the bay)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the basic kinematic relationships for constant acceleration: v=v0+atv = v_0 + at and Δx=v0t+12at2\Delta x = v_0 t + \frac{1}{2} a t^2.

  • Always perform a quick units check on every algebraic formula you write down before plugging in numerical values.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to convert the burn time from milliseconds to seconds, using 250 s instead of 0.250 s.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Newton's first law: an object moves at constant velocity if net force is zero. ⟹ ΣF=0 N\Sigma F = 0\text{ N}

  2. Step 2

    m=125×0.4536=56.7 kgm = 125 \times 0.4536 = 56.7\text{ kg}

  3. Step 3

    M=2400 kg  ⟹  a=72002400=3.00 m/s2M = 2400\text{ kg} \implies a = \frac{7200}{2400} = 3.00\text{ m/s}^2

  4. Step 4

    Δt=250 s\Delta t = 250\text{ s}

    Correct

    Δt=250 ms=250×10−3 s=0.250 s\Delta t = 250\text{ ms} = 250 \times 10^{-3}\text{ s} = 0.250\text{ s}

    You treated the duration Δt=250 ms\Delta t = 250\text{ ms} as 250 s250\text{ s} without converting from milliseconds to seconds (1 ms=10−3 s1\text{ ms} = 10^{-3}\text{ s}).

  5. Step 5

    Δxrel=(12)a(Δt)2=(12)(3.00)(250)2=93750 m\Delta x_{\text{rel}} = \left(\frac{1}{2}\right) a (\Delta t)^2 = \left(\frac{1}{2}\right)(3.00)(250)^2 = 93750\text{ m}

    Correct

    Δxrel=12a(Δt)2=12(3.00 m/s2)(0.250 s)2=0.0938 m\Delta x_{\text{rel}} = \frac{1}{2} a (\Delta t)^2 = \frac{1}{2}(3.00\text{ m/s}^2)(0.250\text{ s})^2 = 0.0938\text{ m}

    Your kinematic formula is correct, but propagating the unconverted time value produced an incorrect final displacement.

WHAT YOU DID WELL
Compliments from Your Teacher

You clearly stated Newton's first law and deduced that the net force on the cruising probe is zero.

You correctly carried out unit conversions for pounds to kilograms and metric tons to kilograms.

You correctly used Newton's second law to calculate the vehicle's forward acceleration.

You correctly identified that the relative shift equals 12a(Δt)2\frac{1}{2} a (\Delta t)^2 because the probe maintains constant velocity by inertia.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit conversion omission (milliseconds to seconds)

You copied the numerical value 250250 directly as seconds instead of converting milliseconds (250 ms=0.250 s250\text{ ms} = 0.250\text{ s}).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking metric SI prefixes (milli- means 10−310^{-3}) before substituting values into kinematic equations.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check SI Prefixes
  • Standard kinematic and dynamic equations require time in seconds (s\text{s}), where 1 ms=10−3 s1\text{ ms} = 10^{-3}\text{ s}.

  • Always convert any given prefix (extms ext{ms}, extkm ext{km}, extkN ext{kN}) to base SI units before substituting into equations.

Sanity Check Relative Scale
  • An internal shift cannot exceed the bay length (L=8.50 mL = 8.50\text{ m}) during a brief thruster pulse.

  • Compare your calculated displacement against the physical geometry given in the problem.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert time to standard units: Δt=250 ms=0.250 s\Delta t = 250\text{ ms} = 0.250\text{ s}.

  2. Substitute into the relative displacement formula: Δxrel=12a(Δt)2=12(3.00 m/s2)(0.250 s)2\Delta x_{\text{rel}} = \frac{1}{2} a (\Delta t)^2 = \frac{1}{2}(3.00\text{ m/s}^2)(0.250\text{ s})^2.

  3. Evaluate: Δxrel=12(3.00)(0.0625)=0.09375 m≈0.0938 m\Delta x_{\text{rel}} = \frac{1}{2}(3.00)(0.0625) = 0.09375\text{ m} \approx 0.0938\text{ m}.

Final answer

Δxrel=0.0938 m\Delta x_{\text{rel}} = 0.0938\text{ m} (9.38 cm9.38\text{ cm} backward relative to the bay)

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting SI unit prefixes (extmilli− ext{milli-}, extmicro− ext{micro-}, extkilo− ext{kilo-}) before setting up kinematics problems.

  • Check that your final numerical answer makes physical sense within the stated dimensions (8.50 m8.50\text{ m} payload bay).

Lock it in

Similar question

01

A 1500 kg1500\text{ kg} elevator accelerates upward at 2.0 m/s22.0\text{ m/s}^2. A passenger drops a 0.20 kg0.20\text{ kg} tennis ball while standing inside. Neglecting air resistance and taking g=9.8 m/s2g = 9.8\text{ m/s}^2, what is the downward acceleration of the ball relative to the elevator floor?

Answer

arel=11.8 m/s2a_{\text{rel}} = 11.8\text{ m/s}^2. In an inertial frame, the ball accelerates downward at aball=9.8 m/s2a_{\text{ball}} = 9.8\text{ m/s}^2, while the elevator accelerates upward at aelev=+2.0 m/s2a_{\text{elev}} = +2.0\text{ m/s}^2. The relative acceleration is arel=g+aelev=9.8+2.0=11.8 m/s2a_{\text{rel}} = g + a_{\text{elev}} = 9.8 + 2.0 = 11.8\text{ m/s}^2 downward.

02

A 5000 kg5000\text{ kg} spacecraft glides through deep space at 1200 m/s1200\text{ m/s}. Inside an open cargo compartment, a 40 kg40\text{ kg} scientific package floats freely at rest relative to the ship. A rocket engine fires on the spacecraft with a constant thrust of 15.0 kN15.0\text{ kN} for 0.40 s0.40\text{ s}. How far does the spacecraft move relative to the floating package during this burn?

Answer

Δxrel=0.24 m\Delta x_{\text{rel}} = 0.24\text{ m}. The thrust acts on the spacecraft: aship=FM=15000 N5000 kg=3.0 m/s2a_{\text{ship}} = \frac{F}{M} = \frac{15000\text{ N}}{5000\text{ kg}} = 3.0\text{ m/s}^2. The package experiences zero force, so apkg=0a_{\text{pkg}} = 0. The relative shift is Δxrel=12aship(Δt)2=12(3.0)(0.40)2=0.24 m\Delta x_{\text{rel}} = \frac{1}{2} a_{\text{ship}} (\Delta t)^2 = \frac{1}{2}(3.0)(0.40)^2 = 0.24\text{ m}.

03

A 1200 kg1200\text{ kg} flatbed truck carries an untethered 300 kg300\text{ kg} crate on a frictionless bed of length 4.0 m4.0\text{ m}. The truck starts from rest and accelerates forward with a constant engine driving force of 3600 N3600\text{ N}. (a) What is the acceleration of the truck? (b) How much time elapses before the crate slides off the rear edge of the 4.0 m4.0\text{ m} bed?

Answer

(a) atruck=3.0 m/s2a_{\text{truck}} = 3.0\text{ m/s}^2; (b) t=1.63 st = 1.63\text{ s}. Key steps: Because the bed is frictionless, no horizontal force acts on the crate, so the driving force acts only on the truck mass: atruck=3600 N1200 kg=3.0 m/s2a_{\text{truck}} = \frac{3600\text{ N}}{1200\text{ kg}} = 3.0\text{ m/s}^2. Relative to the truck bed, the crate shifts backward by d=12atruckt2  ⟹  4.0=12(3.0)t2  ⟹  t=8.03.0≈1.63 sd = \frac{1}{2}a_{\text{truck}}t^2 \implies 4.0 = \frac{1}{2}(3.0)t^2 \implies t = \sqrt{\frac{8.0}{3.0}} \approx 1.63\text{ s}.

Loading workspace…