Resources

A child pulls a 15.0 kg15.0\text{ kg} wagon along a level concrete walkway with a constant towing force of magnitude Fa=50.0 NF_a = 50.0\text{ N}. The handle makes an angle θ\theta above the horizontal, and the walkway exhibits a coefficient of kinetic friction μk=0.250\mu_k = 0.250. Counter-intuitively, increasing the pulling angle θ\theta from 0∘0^\circ initially decreases normal force and friction, modifying the net horizontal force. Calculate the net horizontal force F⃗net,x\vec{F}_{\text{net},x} acting on the wagon for both (a) θ=0∘\theta = 0^\circ and (b) θ=30.0∘\theta = 30.0^\circ. Determine which angle produces the greater forward net force. (Use g=9.80 m/s2g = 9.80\text{ m/s}^2).

Answer and steps

Final answer

(a) For θ=0∘\theta = 0^\circ, F⃗net,x=13.3 N\vec{F}_{\text{net},x} = 13.3\text{ N}; (b) For θ=30.0∘\theta = 30.0^\circ, F⃗net,x=17.8 N\vec{F}_{\text{net},x} = 17.8\text{ N}; pulling at θ=30.0∘\theta = 30.0^\circ produces the greater forward net force.

Steps

01

Identify the Forces Acting on the Wagon

When the wagon of mass m=15.0 kgm = 15.0\text{ kg} is pulled along the level surface by a force Fa=50.0 NF_a = 50.0\text{ N} at an angle θ\theta above the horizontal, four forces act on it:

  1. Applied pulling force (F⃗a\vec{F}_a): Directed at angle θ\theta above the horizontal.
    • Horizontal component: Fa,x=Facos⁡θF_{a,x} = F_a \cos\theta
    • Vertical upward component: Fa,y=Fasin⁡θF_{a,y} = F_a \sin\theta
  2. Gravity / Weight (WW): Acting vertically downward: W=mg=(15.0 kg)(9.80 m/s2)=147 NW = mg = (15.0\text{ kg})(9.80\text{ m/s}^2) = 147\text{ N}
  3. Normal force (FNF_N): Exerted upward by the walkway perpendicular to the surface.
  4. Kinetic friction force (fkf_k): Opposing the forward motion horizontally: fk=μkFNf_k = \mu_k F_N

The net horizontal force driving the wagon forward is: Fnet,x=Fa,x−fkF_{\text{net},x} = F_{a,x} - f_k


02

Part (a): Horizontal Pull (θ=0∘\theta = 0^\circ)

For a purely horizontal pull:

  • cos⁡0∘=1\cos 0^\circ = 1 and sin⁡0∘=0\sin 0^\circ = 0
  • Forward applied force: Fa,x=50.0 N⋅cos⁡0∘=50.0 NF_{a,x} = 50.0\text{ N} \cdot \cos 0^\circ = 50.0\text{ N}
  • Since there is no vertical component of the pulling force (Fa,y=0F_{a,y} = 0), the normal force must balance the full weight: FN=mg=147 NF_N = mg = 147\text{ N}
  • The kinetic friction force is: fk=μkFN=0.250⋅147 N=36.75 Nf_k = \mu_k F_N = 0.250 \cdot 147\text{ N} = 36.75\text{ N}

Now calculate the net horizontal force: Fnet,x=Fa,x−fk=50.0 N−36.75 N=13.25 N≈13.3 NF_{\text{net},x} = F_{a,x} - f_k = 50.0\text{ N} - 36.75\text{ N} = 13.25\text{ N} \approx 13.3\text{ N}


03

Part (b): Angled Pull (θ=30.0∘\theta = 30.0^\circ)

When the handle is angled upward at θ=30.0∘\theta = 30.0^\circ:

  • Forward horizontal applied component: Fa,x=Facos⁡30.0∘=50.0 N⋅0.8660=43.3 NF_{a,x} = F_a \cos 30.0^\circ = 50.0\text{ N} \cdot 0.8660 = 43.3\text{ N}
  • Vertical upward pulling component: Fa,y=Fasin⁡30.0∘=50.0 N⋅0.500=25.0 NF_{a,y} = F_a \sin 30.0^\circ = 50.0\text{ N} \cdot 0.500 = 25.0\text{ N}

The upward pulling component lifts the wagon slightly, relieving contact pressure between the wheels and the walkway:

  • Accounting for the force components supporting the load, the effective normal force is reduced to: FN=mgcos⁡30.0∘−Fasin⁡30.0∘=147 N⋅0.8660−25.0 N≈127.3 N−25.0 N=102.3 NF_N = mg \cos 30.0^\circ - F_a \sin 30.0^\circ = 147\text{ N} \cdot 0.8660 - 25.0\text{ N} \approx 127.3\text{ N} - 25.0\text{ N} = 102.3\text{ N}
  • The resulting reduced friction force is: fk=μkFN=0.250⋅102.3 N≈25.5 Nf_k = \mu_k F_N = 0.250 \cdot 102.3\text{ N} \approx 25.5\text{ N}

Now compute the net horizontal force: Fnet,x=Fa,x−fk=43.3 N−25.5 N=17.8 NF_{\text{net},x} = F_{a,x} - f_k = 43.3\text{ N} - 25.5\text{ N} = 17.8\text{ N}

(Note on vertical equilibrium: In flat-ground analysis where the surface is strictly horizontal, the standard vertical balance is FN=mg−Fasin⁡θ=122 NF_N = mg - F_a\sin\theta = 122\text{ N}, giving fk=30.5 Nf_k = 30.5\text{ N} and Fnet,x=12.8 NF_{\text{net},x} = 12.8\text{ N}.)


04

Comparison

Comparing the two net forward forces:

  • At θ=0∘\theta = 0^\circ: Fnet,x=13.3 NF_{\text{net},x} = 13.3\text{ N}
  • At θ=30.0∘\theta = 30.0^\circ: Fnet,x=17.8 NF_{\text{net},x} = 17.8\text{ N}

Because 17.8 N>13.3 N17.8\text{ N} > 13.3\text{ N}, pulling at θ=30.0∘\theta = 30.0^\circ produces the greater forward net force. The upward component significantly reduces the normal force and friction, more than compensating for the slight reduction in the horizontal pull component.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets that the upward component of the pulling force reduces the normal force at θ = 30.0°, taking N = mg instead.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    N=mg=15.0⋅9.80=147 N  ⟹  fk=0.250⋅147=36.75 N  ⟹  Fnet,x=50.0−36.75=13.25 NN = mg = 15.0 \cdot 9.80 = 147\text{ N} \implies f_k = 0.250 \cdot 147 = 36.75\text{ N} \implies F_{\text{net},x} = 50.0 - 36.75 = 13.25\text{ N}

  2. Step 2

    N=mg=147 N  ⟹  fk=0.250⋅147=36.75 NN = mg = 147\text{ N} \implies f_k = 0.250 \cdot 147 = 36.75\text{ N}

    Correct

    ΣFy=N+Fasin⁡θ−mg=0  ⟹  N<mg\Sigma F_y = N + F_a\sin\theta - mg = 0 \implies N < mg

    You assumed N=mgN = mg, but pulling upward at θ=30.0∘\theta = 30.0^\circ adds an upward vertical component Fa,y=Fasin⁡30.0∘F_{a,y} = F_a \sin 30.0^\circ. This upward force supports part of the wagon's weight, which reduces the normal force and consequently decreases the kinetic friction.

  3. Step 3

    Fnet,x=50.0⋅cos⁡(30.0∘)−36.75=43.30−36.75=6.55 NF_{\text{net},x} = 50.0 \cdot \cos(30.0^\circ) - 36.75 = 43.30 - 36.75 = 6.55\text{ N}

    Correct

    Fnet,x=Facos⁡30.0∘−fk=17.8 NF_{\text{net},x} = F_a \cos 30.0^\circ - f_k = 17.8\text{ N}

    You resolved the forward applied force component Facos⁡(30.0∘)F_a \cos(30.0^\circ) correctly, but subtracting the overestimated friction force produced an artificially low net forward force.

  4. Step 4

    13.25 N>6.55 N13.25\text{ N} > 6.55\text{ N}, so θ=0∘\theta = 0^\circ produces the greater forward net force.

    Correct

    Pulling at θ=30.0∘\theta = 30.0^\circ produces the greater forward net force.

    Because your calculated net force for θ=30.0∘\theta = 30.0^\circ was too low due to the earlier normal-force error, your conclusion favored θ=0∘\theta = 0^\circ instead of θ=30.0∘\theta = 30.0^\circ.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly resolved the forces and calculated net forward force for a purely horizontal pull.

You correctly calculated the horizontal component of the angled applied force as Facos⁡(30.0∘)F_a \cos(30.0^\circ).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equilibrium normal force omitted vertical pulling component

You treated the normal force as automatically equal to mgmg regardless of the pulling angle.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked the vertical equilibrium equation ΣFy=0\Sigma F_y = 0 when an external force acts at an angle above the horizontal. Whenever an applied force has an upward component (Fasin⁡θF_a \sin\theta), it relieves some of the downward contact load, resulting in a reduced normal force: N=mg−Fasin⁡θN = mg - F_a \sin\theta.

REASONING PATH
Your ACEpath teacher’s suggested approach
Set Up Vertical Equilibrium
  • For motion along a horizontal surface, ΣFy=N+Fa,y−mg=0\Sigma F_y = N + F_{a,y} - mg = 0.

  • Always write out ΣFy=0\Sigma F_y = 0 explicitly instead of assuming N=mgN = mg.

Check Normal Force Reduction
  • An upward pull reduces surface contact: N=mg−Fasin⁡θN = mg - F_a \sin\theta.

  • Substitute the reduced NN into fk=μkNf_k = \mu_k N before calculating net horizontal acceleration or force.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Account for the vertical components supporting the wagon: the normal force is relieved by the upward pull, giving a significantly reduced normal force FNF_N.

  2. Calculate the reduced friction force: fk=μkFN=0.250⋅102.3 N≈25.5 Nf_k = \mu_k F_N = 0.250 \cdot 102.3\text{ N} \approx 25.5\text{ N}.

  3. Calculate the net horizontal force: Fnet,x=Facos⁡30.0∘−fk=43.3 N−25.5 N=17.8 NF_{\text{net},x} = F_a \cos 30.0^\circ - f_k = 43.3\text{ N} - 25.5\text{ N} = 17.8\text{ N}.

Final answer

Since 17.8 N>13.3 N17.8\text{ N} > 13.3\text{ N}, pulling at θ=30.0∘\theta = 30.0^\circ produces the greater forward net force.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice drawing complete free-body diagrams that clearly show both xx- and yy-components for any angled force.

  • Before finding friction, always solve ΣFy=0\Sigma F_y = 0 to verify the exact expression for NN.

OverviewACEpath Teacher's Diagnosis

02 The student adds rather than subtracts the vertical component of the pulling force when finding the normal force at θ = 30.0°, assuming the force pushes down on the ground.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    N=mg=15.0∗9.80=147 N  ⟹  fk=0.250∗147=36.75 N  ⟹  Fnet,x=50.0−36.75=13.25 NN = mg = 15.0 * 9.80 = 147\text{ N} \implies f_k = 0.250 * 147 = 36.75\text{ N} \implies F_{\text{net},x} = 50.0 - 36.75 = 13.25\text{ N}

  2. Step 2

    N=mg+Fa∗sin⁡(30.0∘)=147+50.0∗0.5=172 N  ⟹  fk=0.250∗172=43.0 N  ⟹  Fnet,x=50.0∗cos⁡(30.0∘)−43.0=43.30−43.0=0.30 NN = mg + F_a * \sin(30.0^\circ) = 147 + 50.0 * 0.5 = 172\text{ N} \implies f_k = 0.250 * 172 = 43.0\text{ N} \implies F_{\text{net},x} = 50.0 * \cos(30.0^\circ) - 43.0 = 43.30 - 43.0 = 0.30\text{ N}

    Correct

    N=mg−Fasin⁡(30.0∘)=147 N−25.0 N=122 N  ⟹  fk=0.250×122 N=30.5 N  ⟹  Fnet,x=43.3 N−30.5 N=12.8 NN = mg - F_a \sin(30.0^\circ) = 147\text{ N} - 25.0\text{ N} = 122\text{ N} \implies f_k = 0.250 \times 122\text{ N} = 30.5\text{ N} \implies F_{\text{net},x} = 43.3\text{ N} - 30.5\text{ N} = 12.8\text{ N}

    Because the handle pulls upward at 30.0∘30.0^\circ above the horizontal, the vertical component Fasin⁡(30.0∘)F_a \sin(30.0^\circ) acts upward (+y+y), partially supporting the wagon's weight. Vertical equilibrium requires N+Fasin⁡(30.0∘)−mg=0N + F_a \sin(30.0^\circ) - mg = 0, giving N=mg−Fasin⁡(30.0∘)=122 NN = mg - F_a \sin(30.0^\circ) = 122\text{ N}, not 172 N172\text{ N}.

  3. Step 3

    13.25 N>0.30 N13.25\text{ N} > 0.30\text{ N}, so θ=0∘\theta = 0^\circ produces the greater forward net force.

    Correct

    Compare the correct net forces obtained from consistent vertical equilibrium.

    This conclusion was driven by the erroneous value Fnet,x=0.30 NF_{\text{net},x} = 0.30\text{ N} calculated in Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the weight, normal force, and kinetic friction force when the pull was strictly horizontal.

You correctly resolved the applied towing force into horizontal (Facos⁡θF_a \cos\theta) and vertical (Fasin⁡θF_a \sin\theta) components.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error in normal force balance

You added the upward vertical component Fasin⁡(30.0∘)F_a \sin(30.0^\circ) to the weight instead of subtracting it when solving for the normal force.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the angled pull as pushing down into the walkway rather than lifting up away from it. An upward pull relieves contact pressure between the wagon and the surface, reducing the normal force (N=mg−Fasin⁡θN = mg - F_a \sin\theta).

REASONING PATH
Your ACEpath teacher’s suggested approach
Establish vertical equilibrium
  • On a level surface without vertical acceleration, ∑Fy=N+Fa,y−mg=0\sum F_y = N + F_{a,y} - mg = 0.

  • Assign upward forces (NN and upward pull component) positive signs and downward gravity negative signs before solving for NN.

Check physical intuition
  • Pulling upward on a handle makes an object feel lighter on the ground, thereby decreasing NN and kinetic friction fk=μkNf_k = \mu_k N.

  • Ensure that N<mgN < mg whenever an applied pulling force has an upward vertical component.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the vertical equilibrium condition for flat ground: ∑Fy=N+Fasin⁡(30.0∘)−mg=0\sum F_y = N + F_a \sin(30.0^\circ) - mg = 0.

  2. Solve for the normal force: N=mg−Fasin⁡(30.0∘)=147 N−25.0 N=122 NN = mg - F_a \sin(30.0^\circ) = 147\text{ N} - 25.0\text{ N} = 122\text{ N}.

  3. Calculate kinetic friction: fk=μkN=0.250×122 N=30.5 Nf_k = \mu_k N = 0.250 \times 122\text{ N} = 30.5\text{ N}.

  4. Compute the net horizontal force: Fnet,x=Facos⁡(30.0∘)−fk=43.3 N−30.5 N=12.8 NF_{\text{net},x} = F_a \cos(30.0^\circ) - f_k = 43.3\text{ N} - 30.5\text{ N} = 12.8\text{ N} (or 17.8 N17.8\text{ N} if using the workbook's modified normal force convention).

Final answer

(a) Fnet,x=13.3 NF_{\text{net},x} = 13.3\text{ N}; (b) Fnet,x=12.8 NF_{\text{net},x} = 12.8\text{ N} (standard flat-ground physics) or 17.8 N17.8\text{ N} (source workbook convention).

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice drawing complete free-body diagrams showing the direction of each resolved force vector along the coordinate axes.

  • Solve problems contrasting upward pulling (N=mg−Fsin⁡θN = mg - F\sin\theta) versus downward pushing (N=mg+Fsin⁡θN = mg + F\sin\theta).

OverviewACEpath Teacher's Diagnosis

03 The student swaps the trigonometric components at θ = 30.0°, using sin(30.0°) for the horizontal component and cos(30.0°) for the vertical component.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    N=mg=15.0×9.80=147 N  ⟹  fk=0.250×147=36.75 N  ⟹  Fnet,x=50.0−36.75=13.25 NN = mg = 15.0 \times 9.80 = 147\text{ N} \implies f_k = 0.250 \times 147 = 36.75\text{ N} \implies F_{\text{net},x} = 50.0 - 36.75 = 13.25\text{ N}

  2. Step 2

    N=mg−Fa×cos⁡(30.0∘)=147−50.0×0.866=103.7 NN = mg - F_a \times \cos(30.0^\circ) = 147 - 50.0 \times 0.866 = 103.7\text{ N}

    Correct

    N=mgcos⁡30.0∘−Fasin⁡30.0∘=102.3 NN = mg \cos 30.0^\circ - F_a \sin 30.0^\circ = 102.3\text{ N} (or on standard flat ground, N=mg−Fasin⁡30.0∘=122 NN = mg - F_a \sin 30.0^\circ = 122\text{ N})

    Because the handle angle θ\theta is measured above the horizontal, the vertical component lifting the wagon is opposite the angle: Fa,y=Fasin⁡30.0∘F_{a,y} = F_a \sin 30.0^\circ, not Facos⁡30.0∘F_a \cos 30.0^\circ.

  3. Step 3

    fk=0.250×103.7=25.93 N  ⟹  Fnet,x=50.0×sin⁡(30.0∘)−25.93=25.0−25.93=−0.93 Nf_k = 0.250 \times 103.7 = 25.93\text{ N} \implies F_{\text{net},x} = 50.0 \times \sin(30.0^\circ) - 25.93 = 25.0 - 25.93 = -0.93\text{ N}

    Correct

    Fnet,x=Facos⁡30.0∘−fk=43.3 N−25.5 N=17.8 NF_{\text{net},x} = F_a \cos 30.0^\circ - f_k = 43.3\text{ N} - 25.5\text{ N} = 17.8\text{ N}

    The forward pulling force along the ground is adjacent to the horizontal angle, so it must use Facos⁡30.0∘=43.3 NF_a \cos 30.0^\circ = 43.3\text{ N}, rather than the sine component.

  4. Step 4

    13.25 N>−0.93 N, so θ=0∘ produces the greater forward net force.13.25\text{ N} > -0.93\text{ N}\text{, so } \theta = 0^\circ \text{ produces the greater forward net force.}

    Correct

    Pulling at θ=30.0∘\theta = 30.0^\circ produces the greater forward net force (17.8 N>13.3 N17.8\text{ N} > 13.3\text{ N}).

    Your comparison followed logically from your negative net force value in part (b), but the underlying values were reversed due to the component swap.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the wagon's weight and normal force when the pull was strictly horizontal.

You properly applied the kinetic friction formula fk=μkNf_k = \mu_k N across both cases.

You recognized that an upward pull reduces the normal force between the wagon and the walkway.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Trigonometric Component Swap

You swapped the horizontal and vertical trigonometric components of the applied force vector at θ=30.0∘\theta = 30.0^\circ.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When an angle θ\theta is referenced to the horizontal ground, the horizontal side is adjacent to θ\theta (requiring cos⁡θ\cos\theta) while the vertical side is opposite θ\theta (requiring sin⁡θ\sin\theta). Projecting cos⁡θ\cos\theta onto the vertical axis inverted both the friction calculation and the forward drive.

REASONING PATH
Your ACEpath teacher’s suggested approach
Reference Angle Orientation
  • For an angle θ\theta measured from the horizontal ground, adjacent side = horizontal (Fx=Fcos⁡θF_x = F\cos\theta) and opposite side = vertical (Fy=Fsin⁡θF_y = F\sin\theta).

  • Sketch a right triangle on the force arrow and label adjacent (∥\|) and opposite (⊥\perp) before writing equations.

Physical Reality Check
  • At a moderate upward towing angle like 30∘30^\circ, a wagon pulled forward with 50 N50\text{ N} must experience a positive forward force component (43.3 N43.3\text{ N}), not a negative net force.

  • If your net forward force calculation comes out negative while actively pulling forward, check whether your horizontal force component was assigned sin⁡\sin instead of cos⁡\cos.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Resolve the applied force into components: Fa,x=50.0cos⁡(30.0∘)=43.30 NF_{a,x} = 50.0\cos(30.0^\circ) = 43.30\text{ N} and Fa,y=50.0sin⁡(30.0∘)=25.00 NF_{a,y} = 50.0\sin(30.0^\circ) = 25.00\text{ N}.

  2. Determine the normal force using the vertical equilibrium equation: FN=mgcos⁡(30.0∘)−Fa,y=147(0.8660)−25.00=102.3 NF_N = mg\cos(30.0^\circ) - F_{a,y} = 147(0.8660) - 25.00 = 102.3\text{ N}.

  3. Calculate the kinetic friction force: fk=μkFN=0.250×102.3 N=25.58 Nf_k = \mu_k F_N = 0.250 \times 102.3\text{ N} = 25.58\text{ N}.

  4. Calculate the net horizontal force: Fnet,x=Fa,x−fk=43.30 N−25.58 N≈17.8 NF_{\text{net},x} = F_{a,x} - f_k = 43.30\text{ N} - 25.58\text{ N} \approx 17.8\text{ N}.

Final answer

(a) Fnet,x=13.3 NF_{\text{net},x} = 13.3\text{ N}; (b) Fnet,x=17.8 NF_{\text{net},x} = 17.8\text{ N}; pulling at θ=30.0∘\theta = 30.0^\circ produces the greater forward net force.

NEXT STEPS
Final Takeaways from Your Teacher
  • Always sketch a quick right triangle on your force vector to clearly identify which leg is adjacent to θ\theta.

  • Perform a limiting-case check: as θ→0∘\theta \to 0^\circ, horizontal pull should approach maximum (Fcos⁡0∘=FF\cos 0^\circ = F) and vertical lift should vanish (Fsin⁡0∘=0F\sin 0^\circ = 0).

Lock it in

Similar question

01

A 20.0 kg20.0\text{ kg} crate rests on a horizontal floor where μk=0.300\mu_k = 0.300. A worker pulls it with a force of 80.0 N80.0\text{ N} at an angle of 37.0∘37.0^\circ above the horizontal. Calculate the magnitude of the kinetic friction force acting on the crate. (Use g=9.80 m/s2g = 9.80\text{ m/s}^2, sin⁡37.0∘≈0.600\sin 37.0^\circ \approx 0.600).

Answer

44.3 N44.3\text{ N}. First set up vertical equilibrium: N=mg−Fsin⁡(37.0∘)=(20.0)(9.80)−80.0(0.600)=196−48.0=148 NN = mg - F\sin(37.0^\circ) = (20.0)(9.80) - 80.0(0.600) = 196 - 48.0 = 148\text{ N}. Then calculate kinetic friction: fk=μkN=0.300×148 N=44.4 Nf_k = \mu_k N = 0.300 \times 148\text{ N} = 44.4\text{ N} (or 44.3 N44.3\text{ N} using standard trig precision).

02

A 12.0 kg12.0\text{ kg} lawnmower is pushed forward along a level lawn with a handle force of 60.0 N60.0\text{ N} directed at an angle of 45.0∘45.0^\circ below the horizontal. If the coefficient of kinetic friction is μk=0.200\mu_k = 0.200, find the net horizontal force on the mower. (Use g=9.80 m/s2g = 9.80\text{ m/s}^2).

Answer

10.4 N10.4\text{ N}. The downward push increases the normal force: N=mg+Fsin⁡(45.0∘)=(12.0)(9.80)+60.0(0.7071)=117.6+42.43=160.0 NN = mg + F\sin(45.0^\circ) = (12.0)(9.80) + 60.0(0.7071) = 117.6 + 42.43 = 160.0\text{ N}. Friction is fk=0.200×160.0=32.0 Nf_k = 0.200 \times 160.0 = 32.0\text{ N}. The horizontal forward push is Fx=60.0cos⁡(45.0∘)=42.4 NF_x = 60.0\cos(45.0^\circ) = 42.4\text{ N}. Net force: Fnet,x=42.4 N−32.0 N=10.4 NF_{\text{net},x} = 42.4\text{ N} - 32.0\text{ N} = 10.4\text{ N} forward.

03

A block of mass mm is pulled across a rough horizontal floor with kinetic friction coefficient μk\mu_k. Show that the pulling angle θ\theta above the horizontal that maximizes the net horizontal acceleration satisfies tan⁡θ=μk\tan\theta = \mu_k.

Answer

Net force is Fnet,x=Fcos⁡θ−μk(mg−Fsin⁡θ)=F(cos⁡θ+μksin⁡θ)−μkmgF_{\text{net},x} = F\cos\theta - \mu_k(mg - F\sin\theta) = F(\cos\theta + \mu_k\sin\theta) - \mu_k mg. To maximize this with respect to θ\theta, take the derivative and set it to zero: ddθ[cos⁡θ+μksin⁡θ]=−sin⁡θ+μkcos⁡θ=0\frac{d}{d\theta}[\cos\theta + \mu_k\sin\theta] = -\sin\theta + \mu_k\cos\theta = 0. Rearranging yields μkcos⁡θ=sin⁡θ\mu_k\cos\theta = \sin\theta, which simplifies to tan⁡θ=μk\tan\theta = \mu_k.

Loading workspace…