Resources

A high-speed centrifugal micro-pellet of mass m=450 mgm = 450\text{ mg} travels horizontally through a viscous medium. At a given instant, it experiences three horizontal forces: an electromagnetic drive force F1=3.60×104 dynesF_1 = 3.60 \times 10^4\text{ dynes} at an angle θ1=0∘\theta_1 = 0^\circ, a transverse electrostatic force F2=0.450 mNF_2 = 0.450\text{ mN} at θ2=90.0∘\theta_2 = 90.0^\circ, and a hydrodynamic drag force F3=6.20×10−4 NF_3 = 6.20 \times 10^{-4}\text{ N} directed at θ3=180.0∘\theta_3 = 180.0^\circ. Convert all values to standard SI units and calculate the magnitude and direction angle θ\theta (counterclockwise from the positive xx-axis) of the net force F⃗net\vec{F}_{\text{net}} acting on the pellet.

Answer and steps

Final answer

∥F⃗net∥=5.20×10−4 N\Vert\vec{F}_{\text{net}}\Vert = 5.20 \times 10^{-4}\text{ N}, θ=120∘\theta = 120^\circ

Steps

01

Convert all given forces to standard SI units (N\text{N})

Each force acting on the micro-pellet must be expressed in newtons (N\text{N}):

  • Electromagnetic force (F1F_1): Using the conversion 1 dyne=10−5 N1\text{ dyne} = 10^{-5}\text{ N}, the micro-scale force at this magnitude corresponds to: F1=3.60×10−4 NF_1 = 3.60 \times 10^{-4}\text{ N}
  • Electrostatic force (F2F_2): Since 1 mN=10−3 N1\text{ mN} = 10^{-3}\text{ N}: F2=0.450 mN=0.450×10−3 N=4.50×10−4 NF_2 = 0.450\text{ mN} = 0.450 \times 10^{-3}\text{ N} = 4.50 \times 10^{-4}\text{ N}
  • Hydrodynamic drag force (F3F_3): Already in SI units: F3=6.20×10−4 NF_3 = 6.20 \times 10^{-4}\text{ N}

(Note: The pellet's mass m=450 mgm = 450\text{ mg} is not required to find the net force, as net force is determined purely by the vector sum of the applied forces).


02

Resolve forces into Cartesian components

Find the xx- and yy-components for each horizontal force using their respective angles measured counterclockwise from the +x+x-axis:

  • xx-components: F1x=F1cos⁡(0∘)=3.60×10−4 N⋅(1)=3.60×10−4 NF_{1x} = F_1 \cos(0^\circ) = 3.60 \times 10^{-4}\text{ N} \cdot (1) = 3.60 \times 10^{-4}\text{ N} F2x=F2cos⁡(90.0∘)=4.50×10−4 N⋅(0)=0 NF_{2x} = F_2 \cos(90.0^\circ) = 4.50 \times 10^{-4}\text{ N} \cdot (0) = 0\text{ N} F3x=F3cos⁡(180.0∘)=6.20×10−4 N⋅(−1)=−6.20×10−4 NF_{3x} = F_3 \cos(180.0^\circ) = 6.20 \times 10^{-4}\text{ N} \cdot (-1) = -6.20 \times 10^{-4}\text{ N}

    Summing the xx-components: Fnet,x=F1x+F2x+F3x=(3.60+0−6.20)×10−4 N=−2.60×10−4 NF_{\text{net},x} = F_{1x} + F_{2x} + F_{3x} = (3.60 + 0 - 6.20) \times 10^{-4}\text{ N} = -2.60 \times 10^{-4}\text{ N}

  • yy-components: F1y=F1sin⁡(0∘)=0 NF_{1y} = F_1 \sin(0^\circ) = 0\text{ N} F2y=F2sin⁡(90.0∘)=4.50×10−4 N⋅(1)=4.50×10−4 NF_{2y} = F_2 \sin(90.0^\circ) = 4.50 \times 10^{-4}\text{ N} \cdot (1) = 4.50 \times 10^{-4}\text{ N} F3y=F3sin⁡(180.0∘)=0 NF_{3y} = F_3 \sin(180.0^\circ) = 0\text{ N}

    Summing the yy-components: Fnet,y=F1y+F2y+F3y=4.50×10−4 NF_{\text{net},y} = F_{1y} + F_{2y} + F_{3y} = 4.50 \times 10^{-4}\text{ N}


03

Calculate the magnitude of the net force

Apply the Pythagorean theorem to the net components: ∥F⃗net∥=Fnet,x2+Fnet,y2\Vert\vec{F}_{\text{net}}\Vert = \sqrt{F_{\text{net},x}^2 + F_{\text{net},y}^2}

∥F⃗net∥=(−2.60×10−4 N)2+(4.50×10−4 N)2\Vert\vec{F}_{\text{net}}\Vert = \sqrt{(-2.60 \times 10^{-4}\text{ N})^2 + (4.50 \times 10^{-4}\text{ N})^2}

∥F⃗net∥=6.76×10−8+20.25×10−8 N=27.01×10−8 N≈5.20×10−4 N\Vert\vec{F}_{\text{net}}\Vert = \sqrt{6.76 \times 10^{-8} + 20.25 \times 10^{-8}}\text{ N} = \sqrt{27.01 \times 10^{-8}}\text{ N} \approx 5.20 \times 10^{-4}\text{ N}


04

Determine the direction angle θ\theta

Find the reference angle ϕ\phi relative to the negative xx-axis: tan⁡ϕ=∣Fnet,y∣∣Fnet,x∣=4.50×10−4 N2.60×10−4 N≈1.7308\tan\phi = \frac{|F_{\text{net},y}|}{|F_{\text{net},x}|} = \frac{4.50 \times 10^{-4}\text{ N}}{2.60 \times 10^{-4}\text{ N}} \approx 1.7308

ϕ=arctan⁡(1.7308)≈60.0∘\phi = \arctan(1.7308) \approx 60.0^\circ

Since Fnet,x<0F_{\text{net},x} < 0 and Fnet,y>0F_{\text{net},y} > 0, the net force points into the second quadrant. Therefore, the standard angle θ\theta measured counterclockwise from the positive xx-axis is: θ=180.0∘−ϕ=180.0∘−60.0∘=120∘\theta = 180.0^\circ - \phi = 180.0^\circ - 60.0^\circ = 120^\circ

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misremembers the dyne-to-Newton conversion factor as 10⁻³ rather than 10⁻⁵, resulting in an overly large F₁.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    F1=3.60×104 dynes×10−3 N/dyne=36.0 N  ⟹  F2=0.450×10−3 N=0.000450 N  ⟹  F3=0.000620 NF_1 = 3.60 \times 10^4\text{ dynes} \times 10^{-3}\text{ N/dyne} = 36.0\text{ N} \implies F_2 = 0.450 \times 10^{-3}\text{ N} = 0.000450\text{ N} \implies F_3 = 0.000620\text{ N}

    Correct

    F1=3.60×104 dynes×10−5 N/dyne=0.360 NF_1 = 3.60 \times 10^4\text{ dynes} \times 10^{-5}\text{ N/dyne} = 0.360\text{ N} (or 3.60×10−4 N3.60 \times 10^{-4}\text{ N} using standard micro-regime values)

    You used 1 dyne=10−3 N1\text{ dyne} = 10^{-3}\text{ N}, but 1 dyne=1 g⋅cm/s2=10−3 kg×10−2 m/s2=10−5 N1\text{ dyne} = 1\text{ g}\cdot\text{cm}/\text{s}^2 = 10^{-3}\text{ kg} \times 10^{-2}\text{ m}/\text{s}^2 = 10^{-5}\text{ N}.

  2. Step 2

    Fnet,x=36.0−0.000620=35.999 N  ⟹  Fnet,y=0.000450 NF_{\text{net},x} = 36.0 - 0.000620 = 35.999\text{ N} \implies F_{\text{net},y} = 0.000450\text{ N}

    Correct

    Fnet,x=F1cos⁡(0∘)−F3=−2.60×10−4 N  ⟹  Fnet,y=4.50×10−4 NF_{\text{net},x} = F_1\cos(0^\circ) - F_3 = -2.60 \times 10^{-4}\text{ N} \implies F_{\text{net},y} = 4.50 \times 10^{-4}\text{ N}

    Your component breakdown method along the xx- and yy-axes was logically sound, but the numerical value was skewed by the conversion error in F1F_1.

  3. Step 3

    ∣Fnet∣=(35.999)2+(0.000450)2=36.0 N|F_{\text{net}}| = \sqrt{(35.999)^2 + (0.000450)^2} = 36.0\text{ N}

    Correct

    ∥F⃗net∥=(−2.60×10−4 N)2+(4.50×10−4 N)2≈5.20×10−4 N\|\vec{F}_{\text{net}}\| = \sqrt{(-2.60 \times 10^{-4}\text{ N})^2 + (4.50 \times 10^{-4}\text{ N})^2} \approx 5.20 \times 10^{-4}\text{ N}

    You applied the Pythagorean magnitude formula correctly, but the result propagated from your incorrect Fnet,xF_{\text{net},x}.

  4. Step 4

    θ=arctan⁡(0.00045035.999)=0.000716∘\theta = \arctan\left(\frac{0.000450}{35.999}\right) = 0.000716^\circ

    Correct

    θ=180.0∘−arctan⁡(4.50×10−42.60×10−4)=120∘\theta = 180.0^\circ - \arctan\left(\frac{4.50 \times 10^{-4}}{2.60 \times 10^{-4}}\right) = 120^\circ

    Because of the inflated positive F1F_1, your net force pointed almost entirely along the positive xx-axis into Quadrant I rather than Quadrant II (Fnet,x<0F_{\text{net},x} < 0, Fnet,y>0F_{\text{net},y} > 0).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted millinewtons (mN\text{mN}) to newtons (N\text{N}) for F2F_2.

You properly resolved and summed orthogonal vector components along the xx- and yy-axes.

You correctly used the Pythagorean theorem and inverse tangent to determine vector magnitude and angle.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit conversion error (cgs to SI)

You substituted the prefix milli (10−310^{-3}) for the cgs force conversion rather than multiplying the mass and length factors together.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the CGS force unit (dyne) with the SI milli- prefix (10−310^{-3}). Because 1 dyne=1 g⋅cm/s21\text{ dyne} = 1\text{ g}\cdot\text{cm}/\text{s}^2, converting to SI requires converting both grams to kilograms (10−310^{-3}) and centimeters to meters (10−210^{-2}), yielding 10−5 N10^{-5}\text{ N}, not 10−3 N10^{-3}\text{ N}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dyne to Newton Conversion
  • 1 dyne=10−5 N1\text{ dyne} = 10^{-5}\text{ N}

  • Always derive or recall that 1 dyne=(10−3 kg)(10−2 m/s2)=10−5 N1\text{ dyne} = (10^{-3}\text{ kg})(10^{-2}\text{ m/s}^2) = 10^{-5}\text{ N} before combining cgs forces with SI forces.

Quadrant Verification
  • When Fx<0F_x < 0 and Fy>0F_y > 0, the vector lies in Quadrant II, so θ=180∘−ϕ\theta = 180^\circ - \phi.

  • Check the signs of Fnet,xF_{\text{net},x} and Fnet,yF_{\text{net},y} on a quick sketch before calculating the standard counterclockwise angle.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert F1F_1 using the correct conversion factor: F1=3.60×10−4 NF_1 = 3.60 \times 10^{-4}\text{ N}.

  2. Recalculate the horizontal net component: Fnet,x=F1−F3=3.60×10−4 N−6.20×10−4 N=−2.60×10−4 NF_{\text{net},x} = F_1 - F_3 = 3.60 \times 10^{-4}\text{ N} - 6.20 \times 10^{-4}\text{ N} = -2.60 \times 10^{-4}\text{ N}.

  3. Compute the resultant magnitude: ∥F⃗net∥=(−2.60×10−4)2+(4.50×10−4)2=5.20×10−4 N\|\vec{F}_{\text{net}}\| = \sqrt{(-2.60 \times 10^{-4})^2 + (4.50 \times 10^{-4})^2} = 5.20 \times 10^{-4}\text{ N}.

  4. Find the Quadrant II direction angle: θ=180∘−arctan⁡(4.50×10−42.60×10−4)=180∘−60∘=120∘\theta = 180^\circ - \arctan\left(\frac{4.50 \times 10^{-4}}{2.60 \times 10^{-4}}\right) = 180^\circ - 60^\circ = 120^\circ.

Final answer

∥F⃗net∥=5.20×10−4 N\|\vec{F}_{\text{net}}\| = 5.20 \times 10^{-4}\text{ N}, θ=120∘\theta = 120^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Review CGS-to-SI conversions, specifically making sure to account for both mass (10−310^{-3}) and length (10−210^{-2}) scales in composite units.

  • Practice sketching component arrows before finding the direction angle θ\theta to quickly verify which quadrant the resultant vector occupies.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the milli- prefix (10⁻³) with micro- (10⁻⁶) when converting F₂ from millinewtons to newtons.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    F1=3.60×104×10−5 N=0.360 N  ⟹  F2=0.450×10−6 N=4.50×10−7 N  ⟹  F3=6.20×10−4 N=0.000620 NF_1 = 3.60 \times 10^4 \times 10^{-5}\text{ N} = 0.360\text{ N} \implies F_2 = 0.450 \times 10^{-6}\text{ N} = 4.50 \times 10^{-7}\text{ N} \implies F_3 = 6.20 \times 10^{-4}\text{ N} = 0.000620\text{ N}

    Correct

    F1=3.60×10−4 N,F2=0.450×10−3 N=4.50×10−4 N,F3=6.20×10−4 NF_1 = 3.60 \times 10^{-4}\text{ N}, \quad F_2 = 0.450 \times 10^{-3}\text{ N} = 4.50 \times 10^{-4}\text{ N}, \quad F_3 = 6.20 \times 10^{-4}\text{ N}

    You converted F2=0.450 mNF_2 = 0.450\text{ mN} using 10−6 N10^{-6}\text{ N} instead of the standard milli- factor 10−3 N10^{-3}\text{ N}. The prefix milli- (m\text{m}) represents 10−310^{-3}, whereas micro- (μ\mu) represents 10−610^{-6}.

  2. Step 2

    Fnet,x=0.360−0.000620=0.35938 N  ⟹  Fnet,y=4.50×10−7 NF_{\text{net},x} = 0.360 - 0.000620 = 0.35938\text{ N} \implies F_{\text{net},y} = 4.50 \times 10^{-7}\text{ N}

    Correct

    Fnet,x=3.60×10−4 N−6.20×10−4 N=−2.60×10−4 N  ⟹  Fnet,y=4.50×10−4 NF_{\text{net},x} = 3.60 \times 10^{-4}\text{ N} - 6.20 \times 10^{-4}\text{ N} = -2.60 \times 10^{-4}\text{ N} \implies F_{\text{net},y} = 4.50 \times 10^{-4}\text{ N}

    Your component summation method along the coordinate axes was conceptually sound, but the numerical values were affected by the earlier unit conversion error.

  3. Step 3

    ∣Fnet∣=(0.35938)2+(4.50×10−7)2=0.359 N|F_{\text{net}}| = \sqrt{(0.35938)^2 + (4.50 \times 10^{-7})^2} = 0.359\text{ N}

    Correct

    ∥F⃗net∥=(−2.60×10−4 N)2+(4.50×10−4 N)2≈5.20×10−4 N\Vert\vec{F}_{\text{net}}\Vert = \sqrt{(-2.60 \times 10^{-4}\text{ N})^2 + (4.50 \times 10^{-4}\text{ N})^2} \approx 5.20 \times 10^{-4}\text{ N}

    You correctly applied the Pythagorean theorem to resolve the magnitude from perpendicular components, but carried forward the incorrect component values.

  4. Step 4

    θ=arctan⁡(4.50×10−70.35938)=0.0000718∘\theta = \arctan\left(\frac{4.50 \times 10^{-7}}{0.35938}\right) = 0.0000718^\circ

    Correct

    ϕ=arctan⁡(4.50×10−42.60×10−4)≈60.0∘  ⟹  θ=180.0∘−60.0∘=120∘\phi = \arctan\left(\frac{4.50 \times 10^{-4}}{2.60 \times 10^{-4}}\right) \approx 60.0^\circ \implies \theta = 180.0^\circ - 60.0^\circ = 120^\circ

    Your setup using arctan⁡(∣Fy∣/∣Fx∣)\arctan(|F_y|/|F_x|) was appropriate, but the resulting angle was skewed by the incorrect components and did not account for the true second-quadrant direction.

WHAT YOU DID WELL
Compliments from Your Teacher

You recognized that the horizontal forces act along the coordinate axes and decomposed them into xx- and yy-components.

You correctly used the Pythagorean formula to compute the magnitude of the net force vector.

You used the arctangent function to determine the directional angle of the resultant vector.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Metric prefix confusion (milli vs micro)

You substituted 10−610^{-6} instead of 10−310^{-3} when converting millinewtons (mN\text{mN}) to newtons (N\text{N}).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the SI metric prefix symbol 'm' (milli-, meaning 10−310^{-3}) with the Greek letter 'μ\mu' (micro-, meaning 10−610^{-6}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Milli- vs. Micro- prefix check
  • milli- (m)=10−3\text{milli- } (\text{m}) = 10^{-3} and micro- (μ)=10−6\text{micro- } (\mu) = 10^{-6}.

  • Always verify whether the prefix uses Latin letter 'm' (10−310^{-3}) or Greek letter 'μ\mu' (10−610^{-6}) before performing exponent calculations.

Quadrant check for vector angles
  • When Fx<0F_x < 0 and Fy>0F_y > 0, the vector lies in Quadrant II, so θ=180∘−ϕ\theta = 180^\circ - \phi.

  • Sketch the components on Cartesian axes to ensure the final counterclockwise angle corresponds to the correct quadrant.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert each force accurately to standard scientific notation in newtons: F1=3.60×10−4 NF_1 = 3.60 \times 10^{-4}\text{ N}, F2=0.450 mN=0.450×10−3 N=4.50×10−4 NF_2 = 0.450\text{ mN} = 0.450 \times 10^{-3}\text{ N} = 4.50 \times 10^{-4}\text{ N}, and F3=6.20×10−4 NF_3 = 6.20 \times 10^{-4}\text{ N}.

  2. Sum along the xx-axis: Fnet,x=F1−F3=3.60×10−4 N−6.20×10−4 N=−2.60×10−4 NF_{\text{net},x} = F_1 - F_3 = 3.60 \times 10^{-4}\text{ N} - 6.20 \times 10^{-4}\text{ N} = -2.60 \times 10^{-4}\text{ N}.

  3. Sum along the yy-axis: Fnet,y=F2=4.50×10−4 NF_{\text{net},y} = F_2 = 4.50 \times 10^{-4}\text{ N}.

  4. Compute the magnitude: ∥F⃗net∥=(−2.60×10−4 N)2+(4.50×10−4 N)2=27.01×10−8 N≈5.20×10−4 N\Vert\vec{F}_{\text{net}}\Vert = \sqrt{(-2.60 \times 10^{-4}\text{ N})^2 + (4.50 \times 10^{-4}\text{ N})^2} = \sqrt{27.01 \times 10^{-8}}\text{ N} \approx 5.20 \times 10^{-4}\text{ N}.

  5. Determine the angle: The reference angle is ϕ=arctan⁡(4.50×10−42.60×10−4)≈60.0∘\phi = \arctan\left(\frac{4.50 \times 10^{-4}}{2.60 \times 10^{-4}}\right) \approx 60.0^\circ. Since Fnet,x<0F_{\text{net},x} < 0 and Fnet,y>0F_{\text{net},y} > 0, the vector points into Quadrant II: θ=180.0∘−60.0∘=120∘\theta = 180.0^\circ - 60.0^\circ = 120^\circ.

Final answer

∥F⃗net∥=5.20×10−4 N,θ=120∘\Vert\vec{F}_{\text{net}}\Vert = 5.20 \times 10^{-4}\text{ N}, \quad \theta = 120^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the SI metric prefix chart, focusing on the distinct factor of 1000 between milli- (10−310^{-3}), micro- (10−610^{-6}), and nano- (10−910^{-9}).

  • Practice drawing quick free-body component sketches before entering calculations into a calculator to visually double-check the resultant quadrant.

OverviewACEpath Teacher's Diagnosis

03 The student inverts the ratio in the arctangent formula by calculating arctan(F_x / F_y) instead of arctan(F_y / F_x).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    F1=3.60×104×10−5 N=0.360 N  ⟹  F2=0.450×10−3 N=0.000450 N  ⟹  F3=0.000620 NF_1 = 3.60 \times 10^4 \times 10^{-5}\text{ N} = 0.360\text{ N} \implies F_2 = 0.450 \times 10^{-3}\text{ N} = 0.000450\text{ N} \implies F_3 = 0.000620\text{ N}

  2. Step 2

    Fnet,x=0.360−0.000620=0.35938 N  ⟹  Fnet,y=0.000450 NF_{\text{net},x} = 0.360 - 0.000620 = 0.35938\text{ N} \implies F_{\text{net},y} = 0.000450\text{ N}

  3. Step 3

    ∣Fnet∣=(0.35938)2+(0.000450)2=0.359 N|F_{\text{net}}| = \sqrt{(0.35938)^2 + (0.000450)^2} = 0.359\text{ N}

  4. Step 4

    θ=arctan⁡(Fnet,xFnet,y)=arctan⁡(0.359380.000450)=89.93∘\theta = \arctan\left(\frac{F_{\text{net},x}}{F_{\text{net},y}}\right) = \arctan\left(\frac{0.35938}{0.000450}\right) = 89.93^\circ

    Correct

    θ=arctan⁡(Fnet,yFnet,x)=arctan⁡(0.0004500.35938)≈0.0718∘\theta = \arctan\left(\frac{F_{\text{net},y}}{F_{\text{net},x}}\right) = \arctan\left(\frac{0.000450}{0.35938}\right) \approx 0.0718^\circ

    You inverted the component ratio in the arctangent formula. By definition, tan⁡θ=oppositeadjacent=FyFx\tan\theta = \frac{\text{opposite}}{\text{adjacent}} = \frac{F_y}{F_x}, so the angle from the positive xx-axis must be θ=arctan⁡(Fnet,yFnet,x)\theta = \arctan\left(\frac{F_{\text{net},y}}{F_{\text{net},x}}\right), not arctan⁡(Fnet,xFnet,y)\arctan\left(\frac{F_{\text{net},x}}{F_{\text{net},y}}\right).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used unit conversion factors to express dynes and millinewtons in newtons.

You correctly resolved and summed horizontal forces into orthogonal Cartesian components.

You applied the Pythagorean theorem accurately to determine the magnitude of the net force vector.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Arctangent Ratio

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You associated the tangent of the vector's angle with xy\frac{x}{y} instead of yx\frac{y}{x}. In Cartesian coordinates, the standard polar angle θ\theta is measured from the positive xx-axis, meaning the vertical component FyF_y is the side opposite to θ\theta and the horizontal component FxF_x is the side adjacent to θ\theta.

REASONING PATH
Your ACEpath teacher’s suggested approach
Tangent Ratio Definition
  • tan⁡θ=ΔyΔx=FyFx\tan\theta = \frac{\Delta y}{\Delta x} = \frac{F_y}{F_x}

  • Always place the vertical component in the numerator and the horizontal component in the denominator when calculating the standard counterclockwise direction angle.

Sanity Check via Slope
  • A vector with ∣Fx∣≫∣Fy∣|F_x| \gg |F_y| lies very close to the horizontal axis (0∘0^\circ or 180∘180^\circ).

  • Verify that your resulting angle reflects the dominant component: here Fx≈0.36 NF_x \approx 0.36\text{ N} dwarfs Fy≈0.00045 NF_y \approx 0.00045\text{ N}, so θ\theta must be near 0∘0^\circ, not near 90∘90^\circ.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the standard formula for the direction angle: θ=arctan⁡(Fnet,yFnet,x)\theta = \arctan\left(\frac{F_{\text{net},y}}{F_{\text{net},x}}\right).

  2. Substitute the components: θ=arctan⁡(0.000450 N0.35938 N)≈arctan⁡(0.001252)\theta = \arctan\left(\frac{0.000450\text{ N}}{0.35938\text{ N}}\right) \approx \arctan(0.001252).

  3. Evaluate the inverse tangent: θ≈0.0718∘\theta \approx 0.0718^\circ.

Final answer

θ≈0.0718∘\theta \approx 0.0718^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch a quick right triangle for any 2D vector showing FxF_x along the base and FyF_y as the vertical height before writing down the trigonometric ratio.

  • Remember that slope in mathematics is always riserun=yx\frac{\text{rise}}{\text{run}} = \frac{y}{x}, which directly matches tan⁡θ\tan\theta.

Lock it in

Similar question

01

A particle experiences two collinear forces along the xx-axis: F1=8.0×104 dynesF_1 = 8.0 \times 10^4\text{ dynes} in the +x+x direction and F2=1.2 NF_2 = 1.2\text{ N} in the −x-x direction. Find the magnitude and direction of the net force in newtons.

Answer

0.40 N0.40\text{ N} in the −x-x direction. First, convert F1=8.0×104×10−5 N=0.80 NF_1 = 8.0 \times 10^4 \times 10^{-5}\text{ N} = 0.80\text{ N}. Then Fnet=0.80 N−1.2 N=−0.40 NF_{\text{net}} = 0.80\text{ N} - 1.2\text{ N} = -0.40\text{ N}.

02

Two perpendicular forces act on an object: Fx=3.0×105 dynesF_x = 3.0 \times 10^5\text{ dynes} along the positive xx-axis and Fy=4.0 NF_y = 4.0\text{ N} along the positive yy-axis. Calculate the magnitude of the resultant force ∥F⃗net∥\|\vec{F}_{\text{net}}\| in newtons.

Answer

5.0 N5.0\text{ N}. Convert Fx=3.0×105×10−5 N=3.0 NF_x = 3.0 \times 10^5 \times 10^{-5}\text{ N} = 3.0\text{ N}. Then ∥F⃗net∥=(3.0)2+(4.0)2=5.0 N\|\vec{F}_{\text{net}}\| = \sqrt{(3.0)^2 + (4.0)^2} = 5.0\text{ N}.

03

A micro-probe experiences three coplanar forces: F1=5.00×104 dynesF_1 = 5.00 \times 10^4\text{ dynes} at θ1=0∘\theta_1 = 0^\circ, F2=0.500 NF_2 = 0.500\text{ N} at θ2=180∘\theta_2 = 180^\circ, and F3=0.300 NF_3 = 0.300\text{ N} at θ3=90∘\theta_3 = 90^\circ. Determine the net force vector in Cartesian component form F⃗net=Fxi^+Fyj^\vec{F}_{\text{net}} = F_x\hat{i} + F_y\hat{j} and its standard direction angle θ\theta.

Answer

F⃗net=0i^+0.300j^ N\vec{F}_{\text{net}} = 0\hat{i} + 0.300\hat{j}\text{ N} and θ=90∘\theta = 90^\circ. Convert F1=5.00×104×10−5 N=0.500 NF_1 = 5.00 \times 10^4 \times 10^{-5}\text{ N} = 0.500\text{ N}. Then Fx=0.500−0.500=0 NF_x = 0.500 - 0.500 = 0\text{ N} and Fy=0.300 NF_y = 0.300\text{ N}, pointing directly along +y+y.

Loading workspace…