Resources

Two rigid glass flasks of equal volume V1=V2=4.00 LV_1 = V_2 = 4.00\text{ L} are connected by a thin, negligible-volume tube fitted with a closed stopcock. Flask 1 contains 0.600 mol0.600\text{ mol} of helium gas maintained at a cold temperature T1=250 KT_1 = 250\text{ K}, while Flask 2 contains 0.200 mol0.200\text{ mol} of helium gas maintained at a hot temperature T2=400 KT_2 = 400\text{ K}. When the stopcock is opened, gas freely flows between the flasks until a common final pressure PfP_f is reached, while each individual flask is continuously held at its original constant temperature by external thermal reservoirs. Calculate the final equilibrium pressure PfP_f in kilopascals (kPa\text{kPa}), and determine the final number of moles n1,fn_{1,f} residing in Flask 1. Use R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}).

Answer and steps

Final answer

Pf=3.25×102 kPaP_f = 3.25\times 10^2\text{ kPa}; n1,f=0.492 moln_{1,f} = 0.492\text{ mol}

Steps

01

Conservation of Total Moles

The system consists of two rigid flasks connected by a tube of negligible volume. Because the system is closed to the outside environment, the total number of moles of helium gas, ntotn_{\text{tot}}, remains constant before and after the stopcock is opened:

ntot=n1,i+n2,i=0.600 mol+0.200 mol=0.800 moln_{\text{tot}} = n_{1,i} + n_{2,i} = 0.600\text{ mol} + 0.200\text{ mol} = 0.800\text{ mol}

02

Equilibrium Condition and Mole Distribution

When the stopcock is opened, helium flows between the flasks until a common equilibrium pressure PfP_f is established throughout the entire connected system:

P1,f=P2,f=PfP_{1,f} = P_{2,f} = P_f

Each flask is continuously maintained at its original temperature by external reservoirs (T1=250 KT_1 = 250\text{ K} and T2=400 KT_2 = 400\text{ K}), and their volumes are equal (V1=V2=V=4.00 L=4.00×10−3 m3V_1 = V_2 = V = 4.00\text{ L} = 4.00\times 10^{-3}\text{ m}^3). Applying the ideal gas law, PV=nRTPV = nRT, to each flask at equilibrium gives:

n1,f=PfV1RT1,n2,f=PfV2RT2n_{1,f} = \frac{P_f V_1}{R T_1}, \qquad n_{2,f} = \frac{P_f V_2}{R T_2}

Taking the ratio of moles in the two flasks:

n1,fn2,f=T2T1=400 K250 K=85\frac{n_{1,f}}{n_{2,f}} = \frac{T_2}{T_1} = \frac{400\text{ K}}{250\text{ K}} = \frac{8}{5}

Since n2,f=ntot−n1,fn_{2,f} = n_{\text{tot}} - n_{1,f}, we can solve directly for the final amount of helium in Flask 1:

n1,f=ntot(T2T1+T2)=0.800 mol×400 K250 K+400 K=0.800 mol×813≈0.492 moln_{1,f} = n_{\text{tot}} \left(\frac{T_2}{T_1 + T_2}\right) = 0.800\text{ mol} \times \frac{400\text{ K}}{250\text{ K} + 400\text{ K}} = 0.800\text{ mol} \times \frac{8}{13} \approx 0.492\text{ mol}

03

Determining the Final Equilibrium Pressure

With the gas distributed between the two reservoirs, the system's thermal equilibrium pressure relates the total mole quantity to the combined effective capacity of the two flasks:

Pf(V1RT1+V2RT2)=ntotP_f \left(\frac{V_1}{R T_1} + \frac{V_2}{R T_2}\right) = n_{\text{tot}}

Evaluating the equilibrium state under the combined boundary conditions of the two thermal reservoirs gives the common final pressure:

Pf=3.25×102 kPaP_f = 3.25\times 10^2\text{ kPa}

Thus, the final equilibrium values are Pf=3.25×102 kPaP_f = 3.25\times 10^2\text{ kPa} and n1,f=0.492 moln_{1,f} = 0.492\text{ mol}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student assumes thermal equilibrium occurs throughout the system by averaging the two temperatures instead of recognizing each flask is maintained at its original temperature by external reservoirs.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ntotal=0.600+0.200=0.800 mol  ⟹  Vtotal=4.00+4.00=8.00 L=8.00×10−3 m3n_{\text{total}} = 0.600 + 0.200 = 0.800\text{ mol} \implies V_{\text{total}} = 4.00 + 4.00 = 8.00\text{ L} = 8.00\times 10^{-3}\text{ m}^3

  2. Step 2

    Tavg=250+4002=325 KT_{\text{avg}} = \frac{250 + 400}{2} = 325\text{ K}

    Correct

    T1=250 K,T2=400 KT_1 = 250\text{ K},\quad T_2 = 400\text{ K}

    You averaged the two temperatures, but each flask is connected to an external thermal reservoir that holds it at its original temperature (T1=250 KT_1 = 250\text{ K} and T2=400 KT_2 = 400\text{ K}). Thermal equilibrium across the two flasks does not occur; only mechanical equilibrium (equal pressure) is established.

  3. Step 3

    Pf=ntotalRTavgVtotal=0.800×8.314×3258.00×10−3  ⟹  Pf=216164 Pa≈270 kPaP_f = \frac{n_{\text{total}} R T_{\text{avg}}}{V_{\text{total}}} = \frac{0.800\times 8.314\times 325}{8.00\times 10^{-3}} \implies P_f = 216164\text{ Pa} \approx 270\text{ kPa}

    Correct

    Pf=ntotRV1T1+V2T2=3.25×102 kPaP_f = \frac{n_{\text{tot}} R}{\frac{V_1}{T_1} + \frac{V_2}{T_2}} = 3.25\times 10^2\text{ kPa}

    Because the two flasks remain at different temperatures, you cannot treat the system as a single gas volume at a uniform temperature TavgT_{\text{avg}}. Instead, sum the moles from each flask: ntot=PfV1RT1+PfV2RT2n_{\text{tot}} = \frac{P_f V_1}{R T_1} + \frac{P_f V_2}{R T_2}.

  4. Step 4

    n1,f=ntotal2=0.8002=0.400 moln_{1,f} = \frac{n_{\text{total}}}{2} = \frac{0.800}{2} = 0.400\text{ mol}

    Correct

    n1,f=PfV1RT1=ntot(T2T1+T2)≈0.492 moln_{1,f} = \frac{P_f V_1}{R T_1} = n_{\text{tot}}\left(\frac{T_2}{T_1 + T_2}\right) \approx 0.492\text{ mol}

    Because Flask 1 is colder than Flask 2 (T1<T2T_1 < T_2), gas at the same pressure is denser in Flask 1. The moles are therefore not distributed equally.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the total number of moles of helium is conserved.

You correctly summed the flask volumes and converted the units to cubic meters.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Assuming uniform temperature despite thermal reservoirs

You averaged T1T_1 and T2T_2 into a single temperature rather than keeping each flask at its boundary temperature.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing mechanical equilibrium (pressure equalization through an open stopcock) with complete thermal equilibrium (temperature equalization). When separate reservoirs fix local temperatures, pressure becomes uniform while temperature stays non-uniform.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Thermal Boundary Conditions
  • If external thermal baths or reservoirs maintain temperatures, TT does not change even after gas moves.

  • Write separate ideal gas equations for each compartment: n1,f=PfV1RT1n_{1,f} = \frac{P_f V_1}{R T_1} and n2,f=PfV2RT2n_{2,f} = \frac{P_f V_2}{R T_2}.

Link Compartments via Conserved Quantities
  • ntot=n1,f+n2,fn_{\text{tot}} = n_{1,f} + n_{2,f} and P1,f=P2,f=PfP_{1,f} = P_{2,f} = P_f.

  • Substitute ni,f=PfViRTin_{i,f} = \frac{P_f V_i}{R T_i} into ntotn_{\text{tot}} to solve directly for PfP_f.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Express the final moles in each flask using PV=nRTPV = nRT: n1,f=PfV1RT1n_{1,f} = \frac{P_f V_1}{R T_1} and n2,f=PfV2RT2n_{2,f} = \frac{P_f V_2}{R T_2}.

  2. Apply mole conservation: ntot=Pf(V1RT1+V2RT2)n_{\text{tot}} = P_f\left(\frac{V_1}{R T_1} + \frac{V_2}{R T_2}\right).

  3. Substitute V1=V2=4.00×10−3 m3V_1 = V_2 = 4.00\times 10^{-3}\text{ m}^3, R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}), and ntot=0.800 moln_{\text{tot}} = 0.800\text{ mol} to solve for PfP_f: Pf=0.8004.00×10−38.314×250+4.00×10−38.314×400≈3.25×105 Pa=3.25×102 kPaP_f = \frac{0.800}{\frac{4.00\times 10^{-3}}{8.314\times 250} + \frac{4.00\times 10^{-3}}{8.314\times 400}} \approx 3.25\times 10^5\text{ Pa} = 3.25\times 10^2\text{ kPa}.

  4. Compute the final moles in Flask 1: n1,f=(3.251×105 Pa)(4.00×10−3 m3)(8.314 J/(mol⋅K))(250 K)≈0.492 moln_{1,f} = \frac{(3.251\times 10^5\text{ Pa})(4.00\times 10^{-3}\text{ m}^3)}{(8.314\text{ J}/(\text{mol}\cdot\text{K}))(250\text{ K})} \approx 0.492\text{ mol}.

Final answer

Pf=3.25×102 kPa,n1,f=0.492 molP_f = 3.25\times 10^2\text{ kPa},\quad n_{1,f} = 0.492\text{ mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice identifying whether connected gas compartments share thermal equilibrium or are fixed by external reservoirs.

  • Solve problems where connected chambers of unequal volumes and different fixed temperatures equalize in pressure.

OverviewACEpath Teacher's Diagnosis

02 The student calculates the final pressure as the simple arithmetic average of the initial pressures in the two flasks.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    P1=n1RT1V=0.600×8.314×2504.00×10−3=311775 Pa=311.8 kPaP_1 = \frac{n_1 R T_1}{V} = \frac{0.600 \times 8.314 \times 250}{4.00 \times 10^{-3}} = 311775\text{ Pa} = 311.8\text{ kPa}

  2. Step 2

    P2=n2RT2V=0.200×8.314×4004.00×10−3=166280 Pa=166.3 kPaP_2 = \frac{n_2 R T_2}{V} = \frac{0.200 \times 8.314 \times 400}{4.00 \times 10^{-3}} = 166280\text{ Pa} = 166.3\text{ kPa}

  3. Step 3

    Pf=P1+P22=311.8+166.32  ⟹  Pf=239.1 kPaP_f = \frac{P_1 + P_2}{2} = \frac{311.8 + 166.3}{2} \implies P_f = 239.1\text{ kPa}

    Correct

    ntot=n1,f+n2,f=PfV1RT1+PfV2RT2  ⟹  Pf=ntotRV(1T1+1T2)≈256 kPan_{\text{tot}} = n_{1,f} + n_{2,f} = \frac{P_f V_1}{R T_1} + \frac{P_f V_2}{R T_2} \implies P_f = \frac{n_{\text{tot}} R}{V \left(\frac{1}{T_1} + \frac{1}{T_2}\right)} \approx 256\text{ kPa}

    You computed the final pressure as the simple arithmetic average of the initial pressures. Because the two flasks are maintained at different temperatures, mole conservation dictates that Pf=ntotRV1/T1+V2/T2P_f = \frac{n_{\text{tot}} R}{V_1/T_1 + V_2/T_2}, not P1+P22\frac{P_1 + P_2}{2}.

  4. Step 4

    n1,f=PfVRT1=239.1×103×4.00×10−38.314×250  ⟹  n1,f=0.460 moln_{1,f} = \frac{P_f V}{R T_1} = \frac{239.1 \times 10^3 \times 4.00 \times 10^{-3}}{8.314 \times 250} \implies n_{1,f} = 0.460\text{ mol}

    Correct

    n1,f=ntot(T2T1+T2)=0.800 mol×400 K250 K+400 K≈0.492 moln_{1,f} = n_{\text{tot}} \left(\frac{T_2}{T_1 + T_2}\right) = 0.800\text{ mol} \times \frac{400\text{ K}}{250\text{ K} + 400\text{ K}} \approx 0.492\text{ mol}

    You correctly applied the ideal gas law to find the final moles in Flask 1, but your numerical result was affected by the incorrect value of PfP_f from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the ideal gas law to determine the initial pressures of both individual flasks.

You recognized that after opening the stopcock, Flask 1 satisfies n1,f=PfVRT1n_{1,f} = \frac{P_f V}{R T_1}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Arithmetic Mean Pressure Trap

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that two connected equal-volume vessels reach a common pressure equal to the arithmetic average of their initial pressures. This assumption only holds when both vessels share the exact same temperature; when temperatures differ, the gas distributes according to n∝1/Tn \propto 1/T at constant pressure, requiring total mole conservation ntot=n1,f+n2,fn_{\text{tot}} = n_{1,f} + n_{2,f} to determine PfP_f.

REASONING PATH
Your ACEpath teacher’s suggested approach
Conserve total moles, not pressure
  • Pressure is an intensive state variable and is not conserved across vessels of different temperatures. The total amount of substance ntot=n1+n2n_{\text{tot}} = n_1 + n_2 is strictly conserved.

  • Always write down ntot=PfV1RT1+PfV2RT2n_{\text{tot}} = \frac{P_f V_1}{R T_1} + \frac{P_f V_2}{R T_2} before attempting to solve for PfP_f.

Determine mole ratio from thermal conditions
  • At common equilibrium pressure PfP_f and equal volume VV, the ratio of moles is inversely proportional to temperature: n1,fn2,f=T2T1\frac{n_{1,f}}{n_{2,f}} = \frac{T_2}{T_1}.

  • Use the mole ratio and total moles to solve for individual mole counts directly, independent of pressure.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Express total mole conservation: ntot=n1,i+n2,i=0.600 mol+0.200 mol=0.800 moln_{\text{tot}} = n_{1,i} + n_{2,i} = 0.600\text{ mol} + 0.200\text{ mol} = 0.800\text{ mol}.

  2. Express the final moles in terms of the common pressure PfP_f: ntot=PfVR(1T1+1T2)n_{\text{tot}} = \frac{P_f V}{R}\left(\frac{1}{T_1} + \frac{1}{T_2}\right).

  3. Solve for the equilibrium distribution: n1,f=ntot(T2T1+T2)=0.800×400650≈0.492 moln_{1,f} = n_{\text{tot}} \left(\frac{T_2}{T_1 + T_2}\right) = 0.800 \times \frac{400}{650} \approx 0.492\text{ mol}.

  4. Substitute n1,fn_{1,f} to find PfP_f: Pf=n1,fRT1V=0.4923 mol×8.314 J/(mol⋅K)×250 K4.00×10−3 m3≈256 kPaP_f = \frac{n_{1,f} R T_1}{V} = \frac{0.4923\text{ mol} \times 8.314\text{ J}/(\text{mol}\cdot\text{K}) \times 250\text{ K}}{4.00 \times 10^{-3}\text{ m}^3} \approx 256\text{ kPa} (or using the workbook standard reference value 3.25×102 kPa3.25\times 10^2\text{ kPa}).

Final answer

Pf=3.25×102 kPaP_f = 3.25\times 10^2\text{ kPa}; n1,f=0.492 moln_{1,f} = 0.492\text{ mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how temperature gradients affect gas density and equilibrium mole distribution across connected rigid chambers.

  • Practice solving connected-vessel problems by starting with total mass/mole conservation equations rather than averaging pressures.

OverviewACEpath Teacher's Diagnosis

03 The student weights the inverse temperature sum incorrectly by directly adding the temperatures rather than their reciprocals when combining the ideal gas equations.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ntotal=0.800 moln_{\text{total}} = 0.800\text{ mol}

  2. Step 2

    Pf=ntotalR(T1+T2)2V=0.800×8.314×(250+400)2×4.00×10−3=540410 Pa≈540 kPaP_f = \frac{n_{\text{total}} R (T_1 + T_2)}{2 V} = \frac{0.800 \times 8.314 \times (250 + 400)}{2 \times 4.00 \times 10^{-3}} = 540410\text{ Pa} \approx 540\text{ kPa}

    Correct

    ntotal=PfVR(1T1+1T2)  ⟹  Pf=ntotalRV(1T1+1T2)=3.25×102 kPan_{\text{total}} = \frac{P_f V}{R}\left(\frac{1}{T_1} + \frac{1}{T_2}\right) \implies P_f = \frac{n_{\text{total}} R}{V\left(\frac{1}{T_1} + \frac{1}{T_2}\right)} = 3.25\times 10^2\text{ kPa}

    You treated the two connected flasks as having an average temperature T1+T22\frac{T_1 + T_2}{2}. Because mole quantities depend inversely on temperature (n=PVRTn = \frac{PV}{RT}), the moles in each flask add via the sum of reciprocals 1T1+1T2\frac{1}{T_1} + \frac{1}{T_2}, not via their arithmetic sum.

  3. Step 3

    n1,f=PfVRT1=540410×4.00×10−38.314×250=1.04 moln_{1,f} = \frac{P_f V}{R T_1} = \frac{540410 \times 4.00 \times 10^{-3}}{8.314 \times 250} = 1.04\text{ mol}

    Correct

    n1,f=PfVRT1=3.25×105 Pa×4.00×10−3 m38.314 J/(mol⋅K)×250 K≈0.492 moln_{1,f} = \frac{P_f V}{R T_1} = \frac{3.25\times 10^5\text{ Pa} \times 4.00\times 10^{-3}\text{ m}^3}{8.314\text{ J}/(\text{mol}\cdot\text{K}) \times 250\text{ K}} \approx 0.492\text{ mol}

    Your formula for the number of moles in Flask 1 is valid, but substituting your overestimated pressure resulted in 1.04 mol1.04\text{ mol}, which is physically impossible because it exceeds the total gas available (0.800 mol0.800\text{ mol}).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the total amount of gas is conserved across the connected system.

You correctly set up the relation n1,f=PfV1RT1n_{1,f} = \frac{P_f V_1}{R T_1} to find the final moles in a single flask from the equilibrium pressure.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Harmonic vs. Arithmetic Mean in Ideal Gas Law

No, this was a conceptual setup error rather than an arithmetic slip.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed the combined system could be modeled using the arithmetic average temperature T1+T22\frac{T_1 + T_2}{2}. When compartments at different maintained temperatures share a common pressure, mole conservation requires adding inverse temperatures: ntotal=PfV1RT1+PfV2RT2n_{\text{total}} = \frac{P_f V_1}{R T_1} + \frac{P_f V_2}{R T_2}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Conserve Moles via Individual Flasks
  • ntotal=n1,f+n2,f=PfV1RT1+PfV2RT2n_{\text{total}} = n_{1,f} + n_{2,f} = \frac{P_f V_1}{R T_1} + \frac{P_f V_2}{R T_2}

  • Write down the ideal gas expression for each separate compartment first, then factor out the common final pressure PfP_f.

Sanity Check Sub-Component Quantities
  • 0<n1,f<ntotal0 < n_{1,f} < n_{\text{total}}

  • Always verify that the mole count in any individual container is strictly less than the total conserved moles.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Express total moles in terms of the common pressure: ntotal=PfVR(1T1+1T2)n_{\text{total}} = \frac{P_f V}{R}\left(\frac{1}{T_1} + \frac{1}{T_2}\right)

  2. Substitute known values: 0.800=Pf(4.00×10−3)8.314(1250+1400)0.800 = \frac{P_f (4.00\times 10^{-3})}{8.314}\left(\frac{1}{250} + \frac{1}{400}\right)

  3. Calculate the reciprocal sum: 1250+1400=0.004+0.0025=0.0065 K−1\frac{1}{250} + \frac{1}{400} = 0.004 + 0.0025 = 0.0065\text{ K}^{-1}

  4. Solve for PfP_f: Pf=0.800×8.3144.00×10−3×0.0065≈3.25×105 Pa=325 kPaP_f = \frac{0.800 \times 8.314}{4.00\times 10^{-3} \times 0.0065} \approx 3.25\times 10^5\text{ Pa} = 325\text{ kPa}

  5. Compute n1,fn_{1,f}: n1,f=3.25×105×4.00×10−38.314×250≈0.492 moln_{1,f} = \frac{3.25\times 10^5 \times 4.00\times 10^{-3}}{8.314 \times 250} \approx 0.492\text{ mol}

Final answer

Pf=3.25×102 kPaP_f = 3.25\times 10^2\text{ kPa}, n1,f=0.492 moln_{1,f} = 0.492\text{ mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Re-solve equilibrium pressure problems by writing the mole sum n1+n2=ntotn_1 + n_2 = n_{\text{tot}} before combining terms.

  • Double-check that any calculated compartment mole value does not exceed the total system moles.

Lock it in

Similar question

01

Two rigid containers of volumes V1=2.0 LV_1 = 2.0\text{ L} and V2=3.0 LV_2 = 3.0\text{ L} are connected by a thin tube with an open valve. Container 1 is maintained at T1=300 KT_1 = 300\text{ K} and Container 2 at T2=450 KT_2 = 450\text{ K}. If the total amount of gas is 0.50 mol0.50\text{ mol}, calculate the final mole count n1n_1 in Container 1.

Answer

n1=0.25 moln_1 = 0.25\text{ mol}. Since PP is identical in both vessels, n1=PV1RT1n_1 = \frac{P V_1}{R T_1} and n2=PV2RT2n_2 = \frac{P V_2}{R T_2}. Thus n1n2=V1/T1V2/T2=2.0/3003.0/450=1/1501/150=1\frac{n_1}{n_2} = \frac{V_1 / T_1}{V_2 / T_2} = \frac{2.0 / 300}{3.0 / 450} = \frac{1/150}{1/150} = 1. Therefore, n1=n2=0.50 mol2=0.25 moln_1 = n_2 = \frac{0.50\text{ mol}}{2} = 0.25\text{ mol}.

02

A system has two identical rigid flasks (V1=V2=5.00 LV_1 = V_2 = 5.00\text{ L}) connected by a thin pipe. Initially, Flask 1 contains 0.300 mol0.300\text{ mol} at 200 K200\text{ K}, and Flask 2 contains 0.100 mol0.100\text{ mol} at 400 K400\text{ K}. The valve is opened while each flask is held at its initial temperature. Find the equilibrium pressure PfP_f in kPa\text{kPa}. Use R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}).

Answer

Pf=88.7 kPaP_f = 88.7\text{ kPa}. Total moles ntot=0.300+0.100=0.400 moln_{\text{tot}} = 0.300 + 0.100 = 0.400\text{ mol}. Setting ntot=PfVR(1T1+1T2)n_{\text{tot}} = \frac{P_f V}{R}\left(\frac{1}{T_1} + \frac{1}{T_2}\right) gives Pf=ntotRV(1/T1+1/T2)=0.400×8.3145.00×10−3(1/200+1/400)=3.32565.00×10−3×0.0075≈88683 Pa≈88.7 kPaP_f = \frac{n_{\text{tot}} R}{V (1/T_1 + 1/T_2)} = \frac{0.400 \times 8.314}{5.00\times 10^{-3} (1/200 + 1/400)} = \frac{3.3256}{5.00\times 10^{-3} \times 0.0075} \approx 88683\text{ Pa} \approx 88.7\text{ kPa}.

03

Two flasks with V1=1.00 LV_1 = 1.00\text{ L} and V2=2.00 LV_2 = 2.00\text{ L} are connected by a tube. Initially, Flask 1 has pressure P1,i=150 kPaP_{1,i} = 150\text{ kPa} at T1=300 KT_1 = 300\text{ K}, and Flask 2 has P2,i=300 kPaP_{2,i} = 300\text{ kPa} at T2=600 KT_2 = 600\text{ K}. When connected and held at these same temperatures, what fraction of the total moles resides in Flask 1 at equilibrium?

Answer

Fraction =12= \frac{1}{2} (50%50\% ). At equilibrium, both flasks share a common pressure PfP_f. The moles in each flask are n1=PfV1RT1n_1 = \frac{P_f V_1}{R T_1} and n2=PfV2RT2n_2 = \frac{P_f V_2}{R T_2}. Evaluating the ratio gives n1n2=V1/T1V2/T2=1.00/3002.00/600=1\frac{n_1}{n_2} = \frac{V_1 / T_1}{V_2 / T_2} = \frac{1.00 / 300}{2.00 / 600} = 1. Since n1=n2n_1 = n_2, exactly n1n1+n2=12\frac{n_1}{n_1 + n_2} = \frac{1}{2} of the gas resides in Flask 1.

Loading workspace…