Resources

A subway train travels along a straight east-west line where the positive xx-axis is defined pointing due east. At t=0 st = 0\text{ s}, the train is located at x0=+450 mx_0 = +450\text{ m} and travels due west with a constant speed of 25.0 m/s25.0\text{ m/s}. Write the complete scalar position function x(t)x(t) with appropriate algebraic signs, calculate the train's position vector at t=30.0 st = 30.0\text{ s}, and determine the exact clock time tt at which the train passes the coordinate origin.

Answer and steps

Final answer

x(t)=450−25.0t mx(t) = 450 - 25.0t\text{ m}; at t=30.0 st = 30.0\text{ s}, x=−300 mx = -300\text{ m} (300 m300\text{ m} west of origin); origin transit occurs at t=18.0 st = 18.0\text{ s}.

Steps

01

Set Up the 1D Coordinate System and Position Function

Uniform linear motion along a straight track is governed by the standard kinematic equation: x(t)=x0+vxtx(t) = x_0 + v_x t

  • Initial position (x0x_0): Given as +450 m+450\text{ m} (east of the origin).
  • Velocity (vxv_x): The train travels at a constant speed of 25.0 m/s25.0\text{ m/s} toward the west. Since the positive direction points east, west corresponds to the negative xx-direction: vx=−25.0 m/sv_x = -25.0\text{ m/s}

Substituting these values yields the complete scalar position function: x(t)=450−25.0t(in meters, where t≥0 is in seconds)x(t) = 450 - 25.0t\quad (\text{in meters, where } t \ge 0\text{ is in seconds})

Common Pitfall: Speed is always a non-negative scalar, but velocity includes directional sign. Writing +25.0t+25.0t instead of −25.0t-25.0t incorrectly models motion toward the east rather than toward the west.


02

Calculate the Position at t=30.0 st = 30.0\text{ s}

Substitute t=30.0 st = 30.0\text{ s} into the position equation: x(30.0)=450−25.0(30.0)x(30.0) = 450 - 25.0(30.0) x(30.0)=450−750=−300 mx(30.0) = 450 - 750 = -300\text{ m}

In terms of physical orientation, the negative sign indicates that the train is located 300 m300\text{ m} west of the coordinate origin.


03

Determine the Time of Origin Transit

The train passes the coordinate origin when its position is x=0 mx = 0\text{ m}. Set x(t)=0x(t) = 0 and solve for tt: 0=450−25.0t0 = 450 - 25.0t 25.0t=45025.0t = 450 t=45025.0=18.0 st = \frac{450}{25.0} = 18.0\text{ s}

The train crosses the origin exactly 18.0 s18.0\text{ s} after t=0 st = 0\text{ s}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student ignores the directional heading 'due west' and assigns a positive sign to velocity, leading to an incorrect position function and downstream calculations.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    x(t)=x0+vt  ⟹  x(t)=450+25.0tx(t) = x_0 + vt \implies x(t) = 450 + 25.0t

    Correct

    x(t)=x0+vxt=450−25.0tx(t) = x_0 + v_x t = 450 - 25.0t

    Because the positive xx-axis points due east, traveling due west requires a negative velocity component: vx=−25.0 m/sv_x = -25.0\text{ m/s}, giving x(t)=450−25.0tx(t) = 450 - 25.0t.

  2. Step 2

    x(30.0)=450+25.0(30.0)  ⟹  x(30.0)=450+750=1200 m  ⟹  r⃗(30.0 s)=1200 mi^x(30.0) = 450 + 25.0(30.0) \implies x(30.0) = 450 + 750 = 1200\text{ m} \implies \vec{r}(30.0\text{ s}) = 1200\text{ m}\hat{i}

    Correct

    x(30.0)=450−25.0(30.0)=−300 m  ⟹  r⃗(30.0 s)=−300 mi^x(30.0) = 450 - 25.0(30.0) = -300\text{ m} \implies \vec{r}(30.0\text{ s}) = -300\text{ m}\hat{i}

    Your arithmetic was accurate based on your formula, but the incorrect sign carried forward. Evaluating x(30.0)=450−750x(30.0) = 450 - 750 gives −300 m-300\text{ m} (or −300 mi^-300\text{ m}\hat{i}).

  3. Step 3

    450+25.0t=0  ⟹  25.0t=−450  ⟹  t=−18.0 s450 + 25.0t = 0 \implies 25.0t = -450 \implies t = -18.0\text{ s}

    Correct

    450−25.0t=0  ⟹  25.0t=450  ⟹  t=18.0 s450 - 25.0t = 0 \implies 25.0t = 450 \implies t = 18.0\text{ s}

    You correctly set the position to zero and solved the linear equation, but the sign error produced an impossible negative transit time. Solving 450−25.0t=0450 - 25.0t = 0 yields t=18.0 st = 18.0\text{ s}.

WHAT YOU DID WELL
Compliments from Your Teacher

You selected the correct standard 1D uniform motion relation x(t)=x0+vxtx(t) = x_0 + v_x t.

You correctly identified the initial coordinate x0=+450 mx_0 = +450\text{ m}.

You solved the linear equation for origin transit using standard algebraic steps.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Velocity sign convention in 1D kinematics

You treated the scalar speed of 25.0 m/s25.0\text{ m/s} as a positive velocity component without aligning its sign with the defined coordinate direction.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing scalar speed (always non-negative) with 1D velocity (which requires an explicit negative sign when motion opposes the positive coordinate axis).

REASONING PATH
Your ACEpath teacher’s suggested approach
Establish coordinate direction before writing equations
  • If an object moves opposite to the designated +x+x direction, its 1D velocity component must be negative (vx=−∣v∣v_x = -|v|).

  • Check the given direction against the axis: 'positive east' plus 'moving west' immediately dictates vx=−25.0 m/sv_x = -25.0\text{ m/s}.

Sanity-check time solutions for future events
  • For motion beginning at t=0t = 0 toward an origin at x=0x = 0, the transit time must satisfy t>0t > 0.

  • A result of t=−18.0 st = -18.0\text{ s} signals that the velocity vector points away from the origin rather than toward it.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute x0=450 mx_0 = 450\text{ m} and vx=−25.0 m/sv_x = -25.0\text{ m/s} into x(t)=x0+vxtx(t) = x_0 + v_x t to obtain x(t)=450−25.0tx(t) = 450 - 25.0t.

  2. Evaluate at t=30.0 st = 30.0\text{ s}: x(30.0)=450−25.0(30.0)=450−750=−300 mx(30.0) = 450 - 25.0(30.0) = 450 - 750 = -300\text{ m}, so r⃗(30.0 s)=−300 mi^\vec{r}(30.0\text{ s}) = -300\text{ m}\hat{i}.

  3. Set x(t)=0x(t) = 0 to find the transit time: 450−25.0t=0  ⟹  25.0t=450  ⟹  t=18.0 s450 - 25.0t = 0 \implies 25.0t = 450 \implies t = 18.0\text{ s}.

Final answer

x(t)=450−25.0t mx(t) = 450 - 25.0t\text{ m}; at t=30.0 st = 30.0\text{ s}, r⃗=−300 mi^\vec{r} = -300\text{ m}\hat{i}; origin transit occurs at t=18.0 st = 18.0\text{ s}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting compass directions (north/south/east/west) into signed 1D velocity components before substituting into formulas.

  • Always review the sign of time answers: obtaining t<0t < 0 when looking for a future crossing is an immediate red flag that a velocity sign was flipped.

OverviewACEpath Teacher's Diagnosis

02 The student calculates scalar position correctly but provides only a scalar magnitude or coordinates rather than a position vector for the second subquestion.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    vx=−25.0 m/s  ⟹  x(t)=450−25.0tv_x = -25.0\text{ m/s} \implies x(t) = 450 - 25.0t

  2. Step 2

    x(30.0)=450−25.0(30.0)  ⟹  x(30.0)=450−750  ⟹  x=−300 mx(30.0) = 450 - 25.0(30.0) \implies x(30.0) = 450 - 750 \implies x = -300\text{ m}

    Correct

    r⃗(30.0)=−300i^ m\vec{r}(30.0) = -300\hat{i}\text{ m} (or 300 m due West300\text{ m}\text{ due West})

    You computed the coordinate value x=−300 mx = -300\text{ m} correctly, but the question requested the position vector. A vector quantity must include direction, written using a unit vector such as r⃗=−300i^ m\vec{r} = -300\hat{i}\text{ m} or stated as 300 m West300\text{ m}\text{ West}.

  3. Step 3

    450−25.0t=0  ⟹  25.0t=450  ⟹  t=18.0 s450 - 25.0t = 0 \implies 25.0t = 450 \implies t = 18.0\text{ s}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that westward travel corresponds to a negative velocity component along the positive east axis.

You evaluated the position at t=30.0 st = 30.0\text{ s} with flawless arithmetic.

You correctly solved for the exact time the train crosses the coordinate origin.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Scalar vs. Vector Representation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the prompt's request for a position vector as a scalar coordinate, omitting unit vector notation or directional specification.

REASONING PATH
Your ACEpath teacher’s suggested approach
Scalar Coordinate vs. Position Vector
  • In one-dimensional kinematics, a scalar coordinate xx specifies location along an axis, while a position vector r⃗\vec{r} points from the origin to that location: r⃗=xi^\vec{r} = x\hat{i}.

  • Whenever a question asks for a position vector, express your answer with vector notation (e.g., r⃗=xi^\vec{r} = x\hat{i}) or explicitly state the magnitude and compass direction.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the scalar coordinate x=−300 mx = -300\text{ m} into vector form along the east-west axis (+x+x is East, so i^\hat{i} points East).

  2. Write the position vector as r⃗(30.0)=−300i^ m\vec{r}(30.0) = -300\hat{i}\text{ m} or as a magnitude with direction: 300 m due West300\text{ m}\text{ due West}.

Final answer

x(t)=450−25.0t mx(t) = 450 - 25.0t\text{ m}; r⃗(30.0 s)=−300i^ m\vec{r}(30.0\text{ s}) = -300\hat{i}\text{ m} (300 m due West300\text{ m}\text{ due West}); t=18.0 st = 18.0\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between 1D coordinates (xx) and 1D position vectors (r⃗=xi^\vec{r} = x\hat{i}).

  • Practice writing final answers in unit-vector form whenever a vector quantity (position, displacement, velocity) is explicitly requested.

OverviewACEpath Teacher's Diagnosis

03 The student calculates the time to reach the origin by taking the initial position divided by speed, but subtracts rather than divides.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    x(t)=450−25.0tx(t) = 450 - 25.0t

  2. Step 2

    x(30.0)=450−25.0(30.0)=−300 m  ⟹  r⃗(30.0 s)=−300 m i^x(30.0) = 450 - 25.0(30.0) = -300\text{ m} \implies \vec{r}(30.0\text{ s}) = -300\text{ m }\hat{i}

  3. Step 3

    0=450−25.0t0 = 450 - 25.0t

  4. Step 4

    t=450−25.0  ⟹  t=425 st = 450 - 25.0 \implies t = 425\text{ s}

    Correct

    25.0t=450  ⟹  t=45025.0=18.0 s25.0t = 450 \implies t = \frac{450}{25.0} = 18.0\text{ s}

    Because 25.025.0 multiplies tt in the term 25.0t25.0t, you need to isolate tt by dividing 450450 by 25.025.0, rather than subtracting 25.025.0.

WHAT YOU DID WELL
Compliments from Your Teacher

You assigned the proper negative sign to velocity for motion in the negative xx-direction.

You evaluated the position function accurately at t=30.0 st = 30.0\text{ s} and included the directional unit vector.

You correctly set the position equal to zero to find when the train crosses the origin.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Algebraic isolation error

You subtracted the velocity coefficient instead of dividing by it when isolating the time variable.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the inverse operation needed to undo multiplication in vt=dv t = d with the operation needed to undo addition.

REASONING PATH
Your ACEpath teacher’s suggested approach
Undoing Multiplicative Coefficients
  • For an equation in the form a⋅t=ba \cdot t = b, isolate tt using division: t=bat = \frac{b}{a}.

  • Rearrange 0=450−25.0t0 = 450 - 25.0t by adding 25.0t25.0t to both sides to get 25.0t=45025.0t = 450, then divide both sides by 25.025.0.

Dimensional and Physical Reality Check
  • Time equals distance divided by speed: [s]=[m][m/s][\text{s}] = \frac{[\text{m}]}{[\text{m/s}]}.

  • Notice that subtracting 450 m−25.0 m/s450\text{ m} - 25.0\text{ m/s} attempts to subtract quantities with different physical units, which signals an algebraic error.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Add 25.0t25.0t to both sides of the equation: 25.0t=45025.0t = 450.

  2. Divide both sides by 25.0 m/s25.0\text{ m/s}: t=45025.0t = \frac{450}{25.0}.

  3. Compute the quotient: t=18.0 st = 18.0\text{ s}.

Final answer

t=18.0 st = 18.0\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review solving one-step linear equations of the form a⋅x=ba \cdot x = b using division.

  • Always perform a quick units check: verifying that metersmeters/second=seconds\frac{\text{meters}}{\text{meters/second}} = \text{seconds} ensures you divided distance by speed.

  • Complete the three targeted practice problems below to master isolating variables in kinematic equations.

Lock it in

Similar question

01

A cyclist moves along an east-west path where east is +x+x. At t=0t = 0, the cyclist is at x0=+180 mx_0 = +180\text{ m} and pedals due west at a constant speed of 12 m/s12\text{ m/s}. Write the position equation x(t)x(t) and find the time when the cyclist reaches the origin.

Answer

Since west is negative, vx=−12 m/sv_x = -12\text{ m/s}. The position function is x(t)=180−12tx(t) = 180 - 12t. Setting x(t)=0x(t) = 0 yields 180−12t=0  ⟹  t=15 s180 - 12t = 0 \implies t = 15\text{ s}.

02

An elevator shaft has a vertical axis with +y+y pointing upward and ground level at y=0 my = 0\text{ m}. At t=0t = 0, an elevator cab starts at y0=+60.0 my_0 = +60.0\text{ m} and descends at a constant speed of 4.0 m/s4.0\text{ m/s}. Determine the cab's position function y(t)y(t), its position at t=20.0 st = 20.0\text{ s}, and when it reaches ground level.

Answer

Descending means vy=−4.0 m/sv_y = -4.0\text{ m/s}, so y(t)=60.0−4.0ty(t) = 60.0 - 4.0t. At t=20.0 st = 20.0\text{ s}, y(20.0)=60.0−4.0(20.0)=−20.0 my(20.0) = 60.0 - 4.0(20.0) = -20.0\text{ m} (below ground). Setting y(t)=0y(t) = 0 yields 60.0−4.0t=0  ⟹  t=15.0 s60.0 - 4.0t = 0 \implies t = 15.0\text{ s}.

03

Two runner robots move along a straight track with the positive axis pointing right. Robot A starts at xA0=+500 mx_{A0} = +500\text{ m} traveling left at 6.0 m/s6.0\text{ m/s}. Robot B starts at xB0=−100 mx_{B0} = -100\text{ m} traveling right at 4.0 m/s4.0\text{ m/s}. Write both position functions and find the time and location where they meet.

Answer

For Robot A, moving left means vA=−6.0 m/s  ⟹  xA(t)=500−6.0tv_A = -6.0\text{ m/s} \implies x_A(t) = 500 - 6.0t. For Robot B, moving right means vB=+4.0 m/s  ⟹  xB(t)=−100+4.0tv_B = +4.0\text{ m/s} \implies x_B(t) = -100 + 4.0t. Equating positions: 500−6.0t=−100+4.0t  ⟹  10.0t=600  ⟹  t=60 s500 - 6.0t = -100 + 4.0t \implies 10.0t = 600 \implies t = 60\text{ s}. Position: xA(60)=500−360=+140 mx_A(60) = 500 - 360 = +140\text{ m}.

Loading workspace…