Resources

In a Young's double-slit experiment, monochromatic light of wavelength λ=532 nm\lambda = 532\text{ nm} illuminates two parallel slits separated by a distance d=0.180 mmd = 0.180\text{ mm}. An observation screen is placed parallel to the plane of the slits at a distance L=1.60 mL = 1.60\text{ m}. Calculate the linear distance yy on the screen between the central maximum (m=0m = 0) and the third-order bright fringe (m=3m = 3). Assume the small-angle approximation holds.

Answer and steps

Final answer

1.42×10−2 m1.42\times 10^{-2}\text{ m} (or 1.42 cm1.42\text{ cm})

Steps

01

Identify the Condition for Constructive Interference

In Young's double-slit experiment, bright fringes (maxima) occur where waves from the two slits interfere constructively. The path length difference Δr\Delta r between the two rays must equal an integer multiple of the wavelength λ\lambda:

Δr=dsin⁡θ=mλ(m=0,±1,±2,… )\Delta r = d \sin\theta = m\lambda \quad (m = 0, \pm 1, \pm 2, \dots)

where:

  • dd is the separation between the slits,
  • θ\theta is the angle between the central axis and the direction to the fringe,
  • mm is the fringe order.
02

Apply the Small-Angle Approximation

Because the distance to the screen LL is vastly larger than the slit separation dd and the fringe displacement yy (L≫yL \gg y), the angle θ\theta is very small. Under the small-angle approximation:

sin⁡θ≈tan⁡θ=yL\sin\theta \approx \tan\theta = \frac{y}{L}

Substituting this into the interference condition gives:

d(ymL)=mλ  ⟹  ym=mλLdd\left(\frac{y_m}{L}\right) = m\lambda \implies y_m = \frac{m\lambda L}{d}

03

Convert Given Values to Standard SI Units

  • Wavelength: λ=532 nm=532×10−9 m\lambda = 532\text{ nm} = 532 \times 10^{-9}\text{ m}
  • Slit separation: d=0.180 mm=0.180×10−3 md = 0.180\text{ mm} = 0.180 \times 10^{-3}\text{ m}
  • Screen distance: L=1.60 mL = 1.60\text{ m}
  • Fringe order: m=3m = 3 (third-order bright fringe)
04

Calculate the Linear Distance y3y_3

Substitute the values into the formula:

y3=3⋅(532×10−9 m)⋅(1.60 m)0.180×10−3 my_3 = \frac{3 \cdot (532 \times 10^{-9}\text{ m}) \cdot (1.60\text{ m})}{0.180 \times 10^{-3}\text{ m}}

y3=2.5536×10−6 m20.180×10−3 m≈1.4187×10−2 my_3 = \frac{2.5536 \times 10^{-6}\text{ m}^2}{0.180 \times 10^{-3}\text{ m}} \approx 1.4187 \times 10^{-2}\text{ m}

Rounding to three significant figures gives:

y=1.42×10−2 m(or 1.42 cm)y = 1.42 \times 10^{-2}\text{ m} \quad (\text{or } 1.42\text{ cm})

Common Pitfall: Always ensure that all lengths (λ\lambda, dd, and LL) are converted to the same base unit (meters) before computing. Mixing nanometers or millimeters with meters is a frequent source of power-of-ten errors.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert the slit separation from millimeters to meters, underestimating the distance d by a factor of 1000 and yielding an answer 1000 times too large.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    y=m⋅λ⋅Ld  ⟹  λ=532 nm=5.32×10−7 my = \frac{m \cdot \lambda \cdot L}{d} \implies \lambda = 532\text{ nm} = 5.32 \times 10^{-7}\text{ m}

  2. Step 2

    d=0.180  ⟹  y=3⋅(5.32×10−7)⋅1.600.180d = 0.180 \implies y = \frac{3 \cdot (5.32 \times 10^{-7}) \cdot 1.60}{0.180}

    Correct

    d=0.180 mm=0.180×10−3 m=1.80×10−4 m  ⟹  y=3⋅(5.32×10−7 m)⋅1.60 m1.80×10−4 md = 0.180\text{ mm} = 0.180 \times 10^{-3}\text{ m} = 1.80 \times 10^{-4}\text{ m} \implies y = \frac{3 \cdot (5.32 \times 10^{-7}\text{ m}) \cdot 1.60\text{ m}}{1.80 \times 10^{-4}\text{ m}}

    You omitted the metric prefix conversion for the slit separation dd. Because dd was given in millimeters (0.180 mm0.180\text{ mm}), it must be converted to base SI units (0.180×10−3 m0.180 \times 10^{-3}\text{ m}) before calculating.

  3. Step 3

    y=1.42×10−5 my = 1.42 \times 10^{-5}\text{ m}

    Correct

    y=1.42×10−2 my = 1.42 \times 10^{-2}\text{ m}

    Your arithmetic follows correctly from substituting d=0.180d = 0.180, but because the denominator was missing the factor of 10−310^{-3}, your final value is 10001000 times too small.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the double-slit fringe position formula y=mλLdy = \frac{m\lambda L}{d}.

You successfully converted the wavelength from nanometers to meters as 5.32×10−7 m5.32 \times 10^{-7}\text{ m}.

You correctly substituted the fringe order m=3m = 3 and distance to the screen L=1.60 mL = 1.60\text{ m}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing Unit Conversion (Metric Prefix)

You treated d=0.180 mmd = 0.180\text{ mm} as 0.180 m0.180\text{ m} when substituting it into the denominator.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Forgetting that standard wave optics calculations require all geometric distances (yy, dd, LL, and λ\lambda) to be in uniform base SI units (meters) before performing multiplication and division.

REASONING PATH
Your ACEpath teacher’s suggested approach
SI Base Unit Uniformity
  • Every length quantity in wave optics equations (y=mλLdy = \frac{m\lambda L}{d}) must be expressed in meters (m\text{m}) before substituting numerical values.

  • Write down each variable explicitly with its SI unit conversion (1 nm=10−9 m1\text{ nm} = 10^{-9}\text{ m}, 1 mm=10−3 m1\text{ mm} = 10^{-3}\text{ m}) before plugging them into the fraction.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write out the slit separation in meters: d=0.180 mm=0.180×10−3 m=1.80×10−4 md = 0.180\text{ mm} = 0.180 \times 10^{-3}\text{ m} = 1.80 \times 10^{-4}\text{ m}.

  2. Substitute all quantities in meters: y3=3⋅(5.32×10−7 m)⋅(1.60 m)1.80×10−4 my_3 = \frac{3 \cdot (5.32 \times 10^{-7}\text{ m}) \cdot (1.60\text{ m})}{1.80 \times 10^{-4}\text{ m}}.

  3. Compute the product in the numerator: 3⋅(5.32×10−7)⋅1.60=2.5536×10−6 m23 \cdot (5.32 \times 10^{-7}) \cdot 1.60 = 2.5536 \times 10^{-6}\text{ m}^2.

  4. Divide by the corrected denominator: y3=2.5536×10−6 m21.80×10−4 m≈1.4187×10−2 my_3 = \frac{2.5536 \times 10^{-6}\text{ m}^2}{1.80 \times 10^{-4}\text{ m}} \approx 1.4187 \times 10^{-2}\text{ m}.

Final answer

1.42×10−2 m1.42 \times 10^{-2}\text{ m} (or 1.42 cm1.42\text{ cm})

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write the unit symbol alongside every numerical value on your scratch paper to immediately catch unconverted prefixes like mm\text{mm}.

  • Perform a quick physical reality check: typical double-slit fringe separations on a screen placed 1 to 2 m1\text{ to }2\text{ m} away are usually on the order of millimeters or centimeters (10−3 to 10−2 m10^{-3}\text{ to }10^{-2}\text{ m}), never micrometers (10−5 m10^{-5}\text{ m}).

OverviewACEpath Teacher's Diagnosis

02 The student uses the dark fringe (destructive interference) condition y = (m + 1/2) * λ * L / d instead of the bright fringe condition for m = 3, resulting in 16.5 mm instead of 14.2 mm.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    y=(m+12)∗λ∗Ld  ⟹  m=3, so m+12=3.5y = (m + \frac{1}{2}) * \frac{\lambda * L}{d} \implies m = 3\text{, so } m + \frac{1}{2} = 3.5

    Correct

    ym=mλLd  ⟹  m=3y_m = \frac{m\lambda L}{d} \implies m = 3

    You selected the position formula for destructive interference (dark fringes or minima). Bright fringes occur when the path difference is an integer multiple of wavelength (dsin⁡θ=mλd\sin\theta = m\lambda), which gives y=mλLdy = \frac{m\lambda L}{d} for the mm-th order maximum.

  2. Step 2

    y=3.5∗(5.32×10−7 m)∗(1.60 m)1.80×10−4 m  ⟹  y=1.65×10−2 my = \frac{3.5 * (5.32 \times 10^{-7}\text{ m}) * (1.60\text{ m})}{1.80 \times 10^{-4}\text{ m}} \implies y = 1.65 \times 10^{-2}\text{ m}

    Correct

    y3=3⋅(5.32×10−7 m)⋅(1.60 m)1.80×10−4 m=1.42×10−2 my_3 = \frac{3 \cdot (5.32 \times 10^{-7}\text{ m}) \cdot (1.60\text{ m})}{1.80 \times 10^{-4}\text{ m}} = 1.42 \times 10^{-2}\text{ m}

    Your unit conversions and calculation are mathematically sound, but substituting the incorrect half-integer multiplier led to an off-target fringe position.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the wavelength to 5.32×10−7 m5.32 \times 10^{-7}\text{ m} and the slit separation to 1.80×10−4 m1.80 \times 10^{-4}\text{ m}.

You identified m=3m = 3 as the order specified in the problem statement.

You evaluated your chosen algebraic expression with correct arithmetic and appropriate significant figures.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Interference Condition Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the condition for constructive interference (bright fringes, where Δr=mλ\Delta r = m\lambda) with destructive interference (dark fringes, where Δr=(m+12)λ\Delta r = (m + \frac{1}{2})\lambda).

REASONING PATH
Your ACEpath teacher’s suggested approach
Interference Type Check
  • Bright fringes require waves from both slits to arrive in phase, meaning path difference Δr=mλ\Delta r = m\lambda. Dark fringes require waves to arrive exactly out of phase, meaning Δr=(m+12)λ\Delta r = (m + \frac{1}{2})\lambda.

  • Always verify whether the problem asks for a bright fringe (use integer mm) or a dark fringe (use half-integer m+12m + \frac{1}{2}) before selecting your formula.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the constructive interference condition: ym=mλLdy_m = \frac{m\lambda L}{d}.

  2. Substitute m=3m = 3, λ=5.32×10−7 m\lambda = 5.32 \times 10^{-7}\text{ m}, L=1.60 mL = 1.60\text{ m}, and d=1.80×10−4 md = 1.80 \times 10^{-4}\text{ m}:

  3. y3=3×(5.32×10−7 m)×1.60 m1.80×10−4 m=1.4187×10−2 my_3 = \frac{3 \times (5.32 \times 10^{-7}\text{ m}) \times 1.60\text{ m}}{1.80 \times 10^{-4}\text{ m}} = 1.4187 \times 10^{-2}\text{ m}.

Final answer

1.42×10−2 m1.42 \times 10^{-2}\text{ m} (or 1.42 cm1.42\text{ cm})

NEXT STEPS
Final Takeaways from Your Teacher
  • Create a side-by-side reference chart showing path differences and screen positions for double-slit maxima versus minima.

  • Practice identifying the key keyword ('bright' vs. 'dark', 'maxima' vs. 'minima') in interference problems before writing down any equations.

  • Review how waves add constructively (peaks aligning with peaks) versus destructively (peaks aligning with troughs) to anchor the math in physical intuition.

OverviewACEpath Teacher's Diagnosis

03 The student inverts the positions of d and L in the formula by writing y = m * λ * d / L, resulting in an incorrect dependence and magnitude of 1.80 × 10⁻⁷ m.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    y=m∗λ∗d/L  ⟹  y=3∗(5.32×10−7 m)∗(1.80×10−4 m)/(1.60 m)y = m * \lambda * d / L \implies y = 3 * (5.32 \times 10^{-7}\text{ m}) * (1.80 \times 10^{-4}\text{ m}) / (1.60\text{ m})

    Correct

    y=mλLd=3⋅(5.32×10−7 m)⋅(1.60 m)1.80×10−4 my = \frac{m\lambda L}{d} = \frac{3 \cdot (5.32 \times 10^{-7}\text{ m}) \cdot (1.60\text{ m})}{1.80 \times 10^{-4}\text{ m}}

    You inverted the variables dd and LL. From the interference condition dsin⁡θ=mλd\sin\theta = m\lambda and the small-angle approximation sin⁡θ≈yL\sin\theta \approx \frac{y}{L}, isolating yy yields y=mλLdy = \frac{m\lambda L}{d}, not mλdL\frac{m\lambda d}{L}.

  2. Step 2

    y=1.80×10−7 my = 1.80 \times 10^{-7}\text{ m}

    Correct

    y=1.42×10−2 my = 1.42 \times 10^{-2}\text{ m}

    This result was directly affected by using the inverted formula in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the fringe order as m=3m = 3.

You properly converted the wavelength and slit separation into meters using scientific notation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula inversion

You placed the slit spacing dd in the numerator and the screen distance LL in the denominator instead of dividing by dd and multiplying by LL.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You likely memorized the formula without verifying its algebraic derivation from d(yL)=mλd\left(\frac{y}{L}\right) = m\lambda or checking the physical intuition that moving the screen farther away (LL) must spread the fringes farther apart (yy).

REASONING PATH
Your ACEpath teacher’s suggested approach
Derive from the path difference
  • The constructive interference condition is dsin⁡θ=mλd\sin\theta = m\lambda. With sin⁡θ≈yL\sin\theta \approx \frac{y}{L}, substituting gives d(yL)=mλd\left(\frac{y}{L}\right) = m\lambda.

  • Always isolate yy algebraically by multiplying both sides by LL and dividing by dd, giving y=mλLdy = \frac{m\lambda L}{d}.

Perform a physical reality check
  • Diffraction and interference patterns spread out as the projection distance increases and compress when the slit separation increases.

  • Check that fringe spacing yy is directly proportional to LL and inversely proportional to dd before calculating.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. y3=mλLdy_3 = \frac{m\lambda L}{d}

  2. y3=3⋅(5.32×10−7 m)⋅(1.60 m)1.80×10−4 my_3 = \frac{3 \cdot (5.32 \times 10^{-7}\text{ m}) \cdot (1.60\text{ m})}{1.80 \times 10^{-4}\text{ m}}

  3. y3=2.5536×10−6 m21.80×10−4 m=1.4187×10−2 my_3 = \frac{2.5536 \times 10^{-6}\text{ m}^2}{1.80 \times 10^{-4}\text{ m}} = 1.4187 \times 10^{-2}\text{ m}

Final answer

1.42×10−2 m1.42 \times 10^{-2}\text{ m} (or 1.42 cm1.42\text{ cm})

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the geometric derivation of the double-slit equation relating Δr=dsin⁡θ\Delta r = d\sin\theta to the screen geometry tan⁡θ≈y/L\tan\theta \approx y/L.

  • Practice checking whether formula variables belong in the numerator or denominator by thinking about what happens when each variable grows very large.

Lock it in

Similar question

01

Light of wavelength λ=600 nm\lambda = 600\text{ nm} passes through two slits separated by d=0.20 mmd = 0.20\text{ mm}. A screen is positioned at a distance L=2.0 mL = 2.0\text{ m}. Find the distance y2y_2 from the central bright fringe to the second-order bright fringe (m=2m = 2).

Answer

Convert units to meters: λ=6.00×10−7 m\lambda = 6.00 \times 10^{-7}\text{ m}, d=2.0×10−4 md = 2.0 \times 10^{-4}\text{ m}, L=2.0 mL = 2.0\text{ m}. Apply y2=2λLd=2⋅(6.00×10−7 m)⋅2.0 m2.0×10−4 m=1.20×10−2 my_2 = \frac{2\lambda L}{d} = \frac{2 \cdot (6.00 \times 10^{-7}\text{ m}) \cdot 2.0\text{ m}}{2.0 \times 10^{-4}\text{ m}} = 1.20 \times 10^{-2}\text{ m} (or 1.2 cm1.2\text{ cm}).

02

In a double-slit experiment with slit spacing d=0.150 mmd = 0.150\text{ mm} and screen distance L=1.20 mL = 1.20\text{ m}, the distance between adjacent bright fringes is measured to be Δy=4.40 mm\Delta y = 4.40\text{ mm}. Calculate the wavelength λ\lambda of the light in nanometers.

Answer

Convert distances to meters: d=1.50×10−4 md = 1.50 \times 10^{-4}\text{ m}, L=1.20 mL = 1.20\text{ m}, Δy=4.40×10−3 m\Delta y = 4.40 \times 10^{-3}\text{ m}. Rearrange Δy=λLd\Delta y = \frac{\lambda L}{d} to find λ=Δy⋅dL=(4.40×10−3 m)(1.50×10−4 m)1.20 m=5.50×10−7 m=550 nm\lambda = \frac{\Delta y \cdot d}{L} = \frac{(4.40 \times 10^{-3}\text{ m})(1.50 \times 10^{-4}\text{ m})}{1.20\text{ m}} = 5.50 \times 10^{-7}\text{ m} = 550\text{ nm}.

03

A double-slit apparatus is illuminated by monochromatic laser light of wavelength 632.8 nm632.8\text{ nm}. The observation screen is at L=2.50 mL = 2.50\text{ m}. If the distance between the central maximum and the fifth dark fringe (m=4m = 4 for minimum condition dsin⁡θ=(m+12)λd\sin\theta = (m + \frac{1}{2})\lambda) is 2.85 cm2.85\text{ cm}, determine the slit separation dd in millimeters.

Answer

For the 5th minimum, the path difference is Δr=(4.5)λ\Delta r = (4.5)\lambda. Convert values: λ=6.328×10−7 m\lambda = 6.328 \times 10^{-7}\text{ m}, y=0.0285 my = 0.0285\text{ m}, L=2.50 mL = 2.50\text{ m}. Using y=4.5λLdy = \frac{4.5\lambda L}{d}, solve for dd: d=4.5⋅(6.328×10−7 m)⋅2.50 m0.0285 m≈2.498×10−4 m=0.250 mmd = \frac{4.5 \cdot (6.328 \times 10^{-7}\text{ m}) \cdot 2.50\text{ m}}{0.0285\text{ m}} \approx 2.498 \times 10^{-4}\text{ m} = 0.250\text{ mm}.

Loading workspace…