Resources

A rectangular cargo transport ship has proper dimensions: length L0=250 mL_0 = 250\text{ m} along the xx-axis and height H0=40.0 mH_0 = 40.0\text{ m} along the transverse yy-axis. The ship moves at a relativistic velocity v⃗=0.866c i^\vec{v} = 0.866c\,\hat{i} parallel to the xx-axis relative to a planetary control tower. Avoid the common sign and coordinate convention trap of applying Lorentz transformations to transverse perpendicular dimensions, and determine the contracted length LL, the transverse height HH, and the observed cross-sectional profile area A=L×HA = L \times H in the xyxy-plane as measured by observers in the control tower.

Answer and steps

Final answer

L=125 mL = 125\text{ m}, H=40.0 mH = 40.0\text{ m}, and A=5.00×103 m2A = 5.00\times 10^3\text{ m}^2

Steps

01

Identify the Direction of Relativistic Motion

In special relativity, length contraction occurs exclusively along the axis parallel to the relative motion between the observer and the object. Dimensions perpendicular (transverse) to the direction of motion remain completely unchanged.

  • Proper length along the direction of motion (xx-axis): L0=250 mL_0 = 250\text{ m}
  • Proper height perpendicular to the motion (yy-axis): H0=40.0 mH_0 = 40.0\text{ m}
  • Relative speed along the xx-axis: v=0.866cv = 0.866c
02

Calculate the Lorentz Factor (γ\gamma)

The Lorentz factor γ\gamma is given by: γ=11−v2c2\gamma = \frac{1}{\sqrt{1 - \frac{v^2}{c^2}}}

Substitute v=0.866cv = 0.866c: 1−(vc)2=1−(0.866)2=1−0.750=0.250=0.500\sqrt{1 - \left(\frac{v}{c}\right)^2} = \sqrt{1 - (0.866)^2} = \sqrt{1 - 0.750} = \sqrt{0.250} = 0.500

γ=10.500=2.00\gamma = \frac{1}{0.500} = 2.00

03

Calculate the Measured Dimensions

  • Length (LL along the xx-axis): L=L0γ=L01−v2c2=250 m×0.500=125 mL = \frac{L_0}{\gamma} = L_0 \sqrt{1 - \frac{v^2}{c^2}} = 250\text{ m} \times 0.500 = 125\text{ m}
  • Height (HH along the yy-axis): Because the motion is entirely parallel to the xx-axis, the transverse dimension does not undergo contraction: H=H0=40.0 mH = H_0 = 40.0\text{ m}

Common Pitfall: Do not apply length contraction to all spatial dimensions. Only the dimension parallel to v⃗\vec{v} contracts; coordinates perpendicular to v⃗\vec{v} satisfy y′=yy' = y and z′=zz' = z.

04

Calculate the Observed Profile Area (AA)

The cross-sectional area of the rectangular profile in the xyxy-plane observed by the control tower is: A=L×H=125 m×40.0 m=5000 m2=5.00×103 m2A = L \times H = 125\text{ m} \times 40.0\text{ m} = 5000\text{ m}^2 = 5.00 \times 10^3\text{ m}^2

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student mistakenly applies length contraction isotropically to both parallel and perpendicular dimensions, incorrectly contracting the transverse height.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    γ=11−0.8662=2.00\gamma = \frac{1}{\sqrt{1 - 0.866^2}} = 2.00

  2. Step 2

    L=L0γ=2502.00=125 mL = \frac{L_0}{\gamma} = \frac{250}{2.00} = 125\text{ m}

  3. Step 3

    H=H0γ=40.02.00=20.0 mH = \frac{H_0}{\gamma} = \frac{40.0}{2.00} = 20.0\text{ m}

    Correct

    H=H0=40.0 mH = H_0 = 40.0\text{ m}

    Length contraction occurs solely along the axis parallel to relative motion. Because the ship moves along the xx-axis, the transverse height along the yy-axis does not contract.

  4. Step 4

    A=L×H=125×20.0=2500 m2A = L \times H = 125 \times 20.0 = 2500\text{ m}^2

    Correct

    A=L×H=125 m×40.0 m=5000 m2=5.00×103 m2A = L \times H = 125\text{ m} \times 40.0\text{ m} = 5000\text{ m}^2 = 5.00 \times 10^3\text{ m}^2

    Your area calculation correctly multiplied length by height, but the numerical result was affected by the incorrect value of HH.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the Lorentz factor γ=2.00\gamma = 2.00.

You correctly applied relativistic length contraction to the longitudinal dimension parallel to motion.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Isotropic length contraction trap

Dividing the transverse dimension by γ\gamma as if space contracts uniformly in all spatial directions.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated relativistic length contraction as an isotropic volume shrinkage rather than a directional effect restricted strictly to the axis parallel to v⃗\vec{v}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Direction of Contraction
  • Length contraction occurs strictly along the axis of relative motion: L∥=L0/γL_\parallel = L_0/\gamma, while perpendicular dimensions remain invariant: L⊥=L0,⊥L_\perp = L_{0,\perp}.

  • Identify the direction of v⃗\vec{v}; only divide dimensions aligned with v⃗\vec{v} by γ\gamma, leaving all perpendicular dimensions equal to their proper lengths.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. H=H0=40.0 mH = H_0 = 40.0\text{ m} (transverse dimension is invariant under motion along the xx-axis)

  2. A=L×H=125 m×40.0 m=5.00×103 m2A = L \times H = 125\text{ m} \times 40.0\text{ m} = 5.00 \times 10^3\text{ m}^2

Final answer

L=125 mL = 125\text{ m}, H=40.0 mH = 40.0\text{ m}, and A=5.00×103 m2A = 5.00 \times 10^3\text{ m}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Always draw an axis showing the direction of v⃗\vec{v} before calculating dimensions.

  • Label each dimension explicitly as either parallel (L∥L_\parallel) or perpendicular (L⊥L_\perp) to relative velocity.

OverviewACEpath Teacher's Diagnosis

02 The student confuses relativistic length contraction with time dilation by multiplying proper length by γ instead of dividing by γ.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    γ=11−(0.866)2=2.00\gamma = \frac{1}{\sqrt{1 - (0.866)^2}} = 2.00

  2. Step 2

    L=γ×L0=2.00×250=500 mL = \gamma \times L_0 = 2.00 \times 250 = 500\text{ m}

    Correct

    L=L0γ=250 m2.00=125 mL = \frac{L_0}{\gamma} = \frac{250\text{ m}}{2.00} = 125\text{ m}

    Length contraction requires dividing the proper length by γ\gamma (L=L0/γL = L_0 / \gamma). Because γ≥1\gamma \ge 1, a moving object must be measured as shorter along its direction of motion than its proper length (L<L0L < L_0).

  3. Step 3

    Transverse dimensions do not contract, so H=H0=40.0 mH = H_0 = 40.0\text{ m}

  4. Step 4

    A=L×H=500×40.0=20000 m2A = L \times H = 500 \times 40.0 = 20000\text{ m}^2

    Correct

    A=L×H=125 m×40.0 m=5.00×103 m2A = L \times H = 125\text{ m} \times 40.0\text{ m} = 5.00 \times 10^3\text{ m}^2

    Your area formula and multiplication were set up correctly, but the numerical result was affected by the incorrect value of LL from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You computed the Lorentz factor γ=2.00\gamma = 2.00 accurately from the given relativistic speed.

You correctly recognized that relativistic length contraction only occurs parallel to the direction of motion, leaving the perpendicular height HH unchanged.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Relativistic Length Formula Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the relativistic length contraction formula with the time dilation formula. While time dilates by multiplying proper time by γ\gamma (Δt=γΔt0\Delta t = \gamma \Delta t_0), lengths contract by dividing proper length by γ\gamma (L=L0/γL = L_0 / \gamma).

REASONING PATH
Your ACEpath teacher’s suggested approach
Physical Reality Check for Moving Objects
  • For any speed 0<v<c0 < v < c, the Lorentz factor is γ>1\gamma > 1. Relativistic effects make moving clocks run slower (time dilates: Δt>Δt0\Delta t > \Delta t_0) and moving rulers shorter (length contracts: L<L0L < L_0).

  • Always verify that your calculated moving length is strictly less than its proper length: L=L0/γ<L0L = L_0 / \gamma < L_0.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the contracted length parallel to motion: L=L0γ=250 m2.00=125 mL = \frac{L_0}{\gamma} = \frac{250\text{ m}}{2.00} = 125\text{ m}.

  2. Keep the perpendicular dimension unchanged: H=H0=40.0 mH = H_0 = 40.0\text{ m}.

  3. Compute the observed cross-sectional area: A=L×H=125 m×40.0 m=5.00×103 m2A = L \times H = 125\text{ m} \times 40.0\text{ m} = 5.00 \times 10^3\text{ m}^2.

Final answer

L=125 mL = 125\text{ m}, H=40.0 mH = 40.0\text{ m}, and A=5.00×103 m2A = 5.00 \times 10^3\text{ m}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between dilation (expansion, ×γ\times \gamma) and contraction (shortening, ÷γ\div \gamma).

  • Practice identifying proper length L0L_0 versus coordinate length LL before choosing between multiplying and dividing by γ\gamma.

OverviewACEpath Teacher's Diagnosis

03 The student miscalculates the relativistic factor by using 1 - v/c instead of √(1 - v²/c²), resulting in an erroneous contraction factor.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Factor=1−vc=1−0.866=0.134\text{Factor} = 1 - \frac{v}{c} = 1 - 0.866 = 0.134

    Correct

    1γ=1−v2c2=1−(0.866)2=0.250=0.500\frac{1}{\gamma} = \sqrt{1 - \frac{v^2}{c^2}} = \sqrt{1 - (0.866)^2} = \sqrt{0.250} = 0.500

    You used a linear subtraction 1−vc1 - \frac{v}{c} instead of the relativistic contraction factor 1γ=1−v2c2\frac{1}{\gamma} = \sqrt{1 - \frac{v^2}{c^2}}.

  2. Step 2

    L=L0×0.134=250×0.134=33.5 mL = L_0 \times 0.134 = 250 \times 0.134 = 33.5\text{ m}

    Correct

    L=L01−v2c2=250 m×0.500=125 mL = L_0 \sqrt{1 - \frac{v^2}{c^2}} = 250\text{ m} \times 0.500 = 125\text{ m}

    Your multiplication was executed properly, but the result is affected by the incorrect contraction factor from Step 1.

  3. Step 3

    H=H0=40.0 mH = H_0 = 40.0\text{ m}

  4. Step 4

    A=L×H=33.5×40.0=1340 m2A = L \times H = 33.5 \times 40.0 = 1340\text{ m}^2

    Correct

    A=L×H=125 m×40.0 m=5.00×103 m2A = L \times H = 125\text{ m} \times 40.0\text{ m} = 5.00 \times 10^3\text{ m}^2

    Your formula and arithmetic for cross-sectional area were correct, but the final numerical value is affected by your earlier calculation of LL.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly left the transverse height unchanged as H=H0=40.0 mH = H_0 = 40.0\text{ m}.

You correctly applied the formula A=L×HA = L \times H to find the observed cross-sectional profile area.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Relativistic factor formula error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You substituted a linear difference 1−vc1 - \frac{v}{c} for the relativistic factor rather than the square-root term 1−v2c2=1γ\sqrt{1 - \frac{v^2}{c^2}} = \frac{1}{\gamma} derived from the Lorentz transformation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Relativistic Contraction Factor
  • L=L01−v2c2=L0γL = L_0 \sqrt{1 - \frac{v^2}{c^2}} = \frac{L_0}{\gamma}

  • Always compute β=vc\beta = \frac{v}{c}, square it to get β2\beta^2, subtract from 11, and take the square root 1−β2\sqrt{1 - \beta^2}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute the relativistic factor: 1−(vc)2=1−(0.866)2=0.250=0.500\sqrt{1 - \left(\frac{v}{c}\right)^2} = \sqrt{1 - (0.866)^2} = \sqrt{0.250} = 0.500.

  2. Calculate the contracted length along the direction of motion: L=L01−v2c2=250 m×0.500=125 mL = L_0 \sqrt{1 - \frac{v^2}{c^2}} = 250\text{ m} \times 0.500 = 125\text{ m}.

  3. Keep the transverse height unchanged: H=40.0 mH = 40.0\text{ m}.

  4. Calculate the observed cross-sectional area: A=L×H=125 m×40.0 m=5.00×103 m2A = L \times H = 125\text{ m} \times 40.0\text{ m} = 5.00 \times 10^3\text{ m}^2.

Final answer

L=125 mL = 125\text{ m}, H=40.0 mH = 40.0\text{ m}, and A=5.00×103 m2A = 5.00\times 10^3\text{ m}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the derivation of length contraction from the Lorentz transformation to reinforce why the factor involves 1−v2/c2\sqrt{1 - v^2/c^2}.

  • Practice computing 1−β2\sqrt{1 - \beta^2} for standard relativistic speeds like 0.6c0.6c, 0.8c0.8c, and 0.866c0.866c.

Lock it in

Similar question

01

A circular billboard of proper diameter D0=10.0 mD_0 = 10.0\text{ m} lies in the xyxy-plane. An observer flies past along the +x+x-axis at speed v=0.60cv = 0.60c (where γ=1.25\gamma = 1.25). Determine the observed dimensions of the billboard along the xx-axis and yy-axis, and state the observed geometric shape.

Answer

Along xx: Dx=D0/γ=10.0 m/1.25=8.00 mD_x = D_0/\gamma = 10.0\text{ m} / 1.25 = 8.00\text{ m}. Along yy: Dy=D0=10.0 mD_y = D_0 = 10.0\text{ m} (no contraction perpendicular to motion). The observed shape is an ellipse with semi-minor axis 4.00 m4.00\text{ m} along xx and semi-major axis 5.00 m5.00\text{ m} along yy.

02

A cubic container has proper volume V0=L03=8.00 m3V_0 = L_0^3 = 8.00\text{ m}^3 (so each proper edge is 2.00 m2.00\text{ m}). The container moves at speed v=0.80cv = 0.80c (gamma=1.67\\gamma = 1.67) parallel to one of its edges. Find the volume VV measured by a stationary observer.

Answer

The edge parallel to motion contracts to L∥=L0/γ=2.00 m/1.67=1.20 mL_\parallel = L_0/\gamma = 2.00\text{ m} / 1.67 = 1.20\text{ m}. The two transverse edges do not contract: L⊥=2.00 mL_\perp = 2.00\text{ m}. The measured volume is V=(L0/γ)×L0×L0=V0/γ=8.00 m3/1.67=4.80 m3V = (L_0/\gamma) \times L_0 \times L_0 = V_0/\gamma = 8.00\text{ m}^3 / 1.67 = 4.80\text{ m}^3.

03

A rectangular sign has proper length L0=4.0 mL_0 = 4.0\text{ m} along the xx-axis and proper height H0=3.0 mH_0 = 3.0\text{ m} along the yy-axis. A probe moves relative to the sign with velocity vector v⃗=0.60c i^+0.80c j^\vec{v} = 0.60c\,\hat{i} + 0.80c\,\hat{j} (∣v⃗∣=c|\vec{v}| = c). Explain qualitatively why resolving contraction requires decomposing dimensions along and perpendicular to v⃗\vec{v} rather than applying γ\gamma to both xx and yy separately.

Answer

Lorentz length contraction is strictly 1D along the axis of relative velocity v^\hat{v}. Any spatial dimension must be resolved into a component parallel to v⃗\vec{v} (which contracts by 1/γ1/\gamma) and a component perpendicular to v⃗\vec{v} (which does not contract). Applying scalar contraction independently to both Cartesian axes fails because the perpendicular direction is invariant.

Loading workspace…