Resources
A virtual object is formed by a converging beam of light that, in the absence of any intervening optics, would focus at a point to the right of a reference plane. A thin diverging lens with focal length is inserted into the beam at this reference plane, so that the virtual object distance is according to the standard Cartesian sign convention. Determine the resulting image distance relative to the lens, and state whether the final image is real or virtual.
Answer and steps
Final answer
(the final image is real and located to the right of the lens)
Steps
Identify the Given Optical Parameters
From the problem statement:
- Virtual object distance:
- Focal length of the diverging lens:
Apply the Lens Equation
The relationship between the object distance , image distance , and focal length under this convention is:
Substitute the values and into the equation:
Simplify the Fractions
Distribute the negative signs:
Find a common denominator ():
Taking the reciprocal gives:
Determine the Nature of the Image
- Sign of : The calculated image distance is positive ().
- Physical Meaning: A positive image distance indicates that the transmitted rays converge and intersect at a point to the right of the lens (downstream in the direction of light propagation). Because light rays physically converge at this location, the image is real.
Pitfall to Avoid: When substituting negative quantities into expressions with subtractions, take care not to drop the double negative: .
Typical errors
01 The student treats the object distance as positive (+18.0 cm) out of habit for standard real objects, yielding an incorrect image distance and type.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You substituted , treating the object as a standard real object. Because the incoming beam is already converging toward a point behind the lens, it constitutes a virtual object, which the problem explicitly specifies as .
- Step 2Correct
Your algebraic rearrangement and common denominator calculation were executed cleanly, but the resulting numerical value is incorrect due to the positive object distance imported from Step 1.
- Step 3Correct
You correctly inferred that a negative image distance signifies a virtual image, but because the correct calculation yields , the rays physically converge on the transmission side to form a real image.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified and applied a negative focal length () for the diverging lens.
You executed the fraction arithmetic and common denominator finding accurately.
You correctly connected the algebraic sign of an image distance to the physical classification of the image.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou defaulted to the habit of treating object distances as positive quantities, overlooking that an incident converging beam targeting a point downstream of the lens represents a virtual object with a negative object distance under the Cartesian sign convention.
REASONING PATH
Your ACEpath teacher’s suggested approach- Identify Incident Beam Convergence
If incident light rays diverge from a point upstream, the object is real (). If incident rays converge toward a point downstream behind the lens, the object is virtual ().
Check whether the rays enter the lens already converging; if so, assign a negative coordinate to .
- Preserve Double Negatives in Lens Relations
When substituting negative coordinates into difference formulas, evaluate minus signs explicitly: .
Write out negative parameters in parentheses before simplifying signs.
CORRECTED PATH
ACEpath Teacher's DemonstrationSubstitute the virtual object distance and focal length into the Cartesian lens relation: .
Distribute the signs: .
Find a common denominator of : .
Take the reciprocal to find .
Because , the light rays physically intersect at to the right of the lens, forming a real image.
(real image)
02 The student forgets that a diverging lens has a negative focal length and uses f = +12.0 cm, leading to an incorrect positive image distance.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You substituted , but a diverging lens has a negative focal length ().
- Step 3Correct
Your algebraic rearrangement and common denominator calculation were executed correctly, but the result carries the incorrect sign from the previous step.
- Step 4Correct
, real image
Your arithmetic reciprocal followed from your previous line, but it is numerically incorrect due to the focal length sign error, and you did not classify the image as real or virtual.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly preserved the negative sign for the virtual object distance .
You accurately resolved the double negative during algebraic isolation.
You found the correct common denominator of to combine the optical fractions.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou dropped the negative sign on the focal length, substituting instead of for a diverging lens.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOverlooking the intrinsic sign convention for diverging optical elements, where focal lengths are always negative by definition.
REASONING PATH
Your ACEpath teacher’s suggested approach- Lens Type Sign Check
Converging lenses have ; diverging lenses always have .
Always write down the explicit sign for before substituting numerical values into the lens equation.
- Image Nature Verification
In the standard Cartesian convention, corresponds to light rays physically converging downstream to form a real image, whereas indicates a virtual image.
Inspect the sign of your final and explicitly state whether the image is real or virtual.
CORRECTED PATH
ACEpath Teacher's DemonstrationSubstitute the correct negative focal length alongside into .
Simplify the signs: .
Convert to a common denominator of : .
Invert to obtain . Because , the light rays physically intersect, forming a real image.
(real image)
03 The student makes an algebraic sign error when subtracting the negative term 1/(-18.0), treating - 1/(-18.0) as subtraction instead of addition.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You inverted the order of terms in the lens equation under this convention. The relationship required is .
- Step 2Correct
You substituted into the denominator without its negative sign. Because the object is virtual, , so subtracting must be evaluated as .
- Step 3Correct
Your fraction arithmetic was carried out correctly for your written terms, but the result is affected by the earlier sign and formula errors.
- Step 4Correct
Inverting your fraction gave , which carries forward the sign error.
- Step 5Correct
You correctly inferred that a negative distance implies a virtual image, but because the true distance is , the physical image is real.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the numerical magnitudes of the focal length () and the object distance ().
You accurately found a common denominator of to combine the two rational terms.
You demonstrated consistent conceptual understanding by matching a negative image distance to a virtual image.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou dropped the negative sign of , treating the term as a subtraction of instead of an addition of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisWhen substituting negative coordinates into formulas with subtraction, dropping double negatives changes an addition into a subtraction, altering the net vergence and flipping the sign and nature of the resulting image.
REASONING PATH
Your ACEpath teacher’s suggested approach- Double Negative in Optics Formulas
When substituting a negative distance into a term with a leading minus sign, .
Always write out parentheses explicitly, such as , before simplifying to .
- Image Nature from Cartesian Sign
In the standard Cartesian convention, means light converges downstream of the lens to form a real image, whereas corresponds to diverging rays forming a virtual image.
Check whether the diverging lens's power is strong enough to completely overcome the beam's initial convergence before concluding whether the image is real or virtual.
CORRECTED PATH
ACEpath Teacher's DemonstrationState the lens equation under the specified convention: .
Substitute and : .
Resolve the negative signs: .
Express with the common denominator : .
Take the reciprocal to find the image distance: .
Because , the rays physically intersect downstream, so the image is real.
(real image)
Lock it in
Under standard Cartesian sign conventions, what distinguishes the sign of the object distance for a real object versus a virtual object?
Real objects have (rays diverge from a point in front of the lens). Virtual objects have (incident rays converge toward a point behind the lens).
Similar question
A converging beam of light focuses at a point to the right of a lens plane. A diverging lens with focal length is placed at the reference plane. Using the Cartesian relation with , calculate the image distance and state whether the image is real or virtual.
Answer
(real image).
Key steps:
- .
- Common denominator: .
- , so the image is real.
A converging cone of rays heads toward a focus to the right of a thin diverging lens with focal length . Find the position of the resulting image and determine whether it is real or virtual.
Answer
(virtual image).
Key steps:
- Identify parameters: and .
- Apply .
- Combine terms: , giving .
- Since , the image is virtual (rays diverge from to the left of the lens).
A converging lens () receives parallel light from the left. A diverging lens () is inserted to the right of . Determine the object distance for , the final image distance measured from , and whether the final image is real or virtual.
Answer
, (virtual image).
Key steps:
- focuses light at from , which is to the right of .
- For , this forms a virtual object at .
- Calculate .
- , indicating a virtual image located to the left of .