Resources

A block of mass m1=0.500 kgm_1 = 0.500\text{ kg} is released from rest at a height h=0.800 mh = 0.800\text{ m} above the floor and slides down a frictionless curved ramp onto a smooth horizontal surface. At the bottom of the ramp, m1m_1 collides with a resting block m2=1.50 kgm_2 = 1.50\text{ kg} (v2i=0 m/sv_{2i} = 0\text{ m/s}) equipped with a hook, causing them to latch together in a completely inelastic collision. The combined mass then slides onto a rough horizontal patch where the coefficient of kinetic friction is μk=0.250\mu_k = 0.250. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, calculate the horizontal stopping distance dd of the coupled blocks on the rough patch.

Answer and steps

Final answer

d=0.200 md = 0.200\text{ m}

Steps

01

Find the speed of m1m_1 at the bottom of the ramp

To find the stopping distance, break the motion into three distinct stages: sliding down the ramp, the collision on the smooth floor, and sliding to rest against friction.

Because the curved ramp is frictionless, mechanical energy is conserved as m1m_1 descends from height hh:

m1gh=12m1v12m_1 g h = \frac{1}{2} m_1 v_1^2

Solving for v12v_1^2:

v12=2ghv_1^2 = 2 g h

v1=2⋅9.80 m/s2⋅0.800 m=15.68 m/s≈3.96 m/sv_1 = \sqrt{2 \cdot 9.80\text{ m/s}^2 \cdot 0.800\text{ m}} = \sqrt{15.68}\text{ m/s} \approx 3.96\text{ m/s}


02

Determine the post-collision speed using conservation of momentum

During the collision, the horizontal net external force on the two blocks is zero, so linear momentum is conserved. The blocks latch together in a completely inelastic collision:

m1v1+m2v2i=(m1+m2)vfm_1 v_1 + m_2 v_{2i} = (m_1 + m_2) v_f

Since m2m_2 is initially at rest (v2i=0 m/sv_{2i} = 0\text{ m/s}):

vf=m1m1+m2v1v_f = \frac{m_1}{m_1 + m_2} v_1

Substitute the given mass values:

vf=0.500 kg0.500 kg+1.50 kgv1=0.5002.00v1=14v1v_f = \frac{0.500\text{ kg}}{0.500\text{ kg} + 1.50\text{ kg}} v_1 = \frac{0.500}{2.00} v_1 = \frac{1}{4} v_1

Common Pitfall: Mechanical energy is not conserved during an inelastic collision because kinetic energy is dissipated as heat, sound, and permanent deformation. Always use momentum conservation—not kinetic energy conservation—to analyze the collision.


03

Find the stopping distance on the rough surface

On the rough patch, kinetic friction does negative work on the coupled blocks until they come to rest. By the work-energy theorem:

Wfk=ΔKW_{f_k} = \Delta K

−fkd=0−12(m1+m2)vf2-f_k d = 0 - \frac{1}{2}(m_1 + m_2) v_f^2

The normal force on horizontal ground is FN=(m1+m2)gF_N = (m_1 + m_2)g, so the magnitude of the friction force is:

fk=μk(m1+m2)gf_k = \mu_k (m_1 + m_2) g

Equating the work of friction to the initial kinetic energy of the combined mass:

μk(m1+m2)gd=12(m1+m2)vf2\mu_k (m_1 + m_2) g d = \frac{1}{2} (m_1 + m_2) v_f^2

Divide both sides by (m1+m2)g(m_1 + m_2) g:

d=vf22μkgd = \frac{v_f^2}{2 \mu_k g}

Now substitute vf=14v1v_f = \frac{1}{4} v_1 and v12=2ghv_1^2 = 2gh:

vf2=(14v1)2=116v12=116(2gh)=gh8v_f^2 = \left(\frac{1}{4} v_1\right)^2 = \frac{1}{16} v_1^2 = \frac{1}{16}(2gh) = \frac{gh}{8}

d=gh82μkg=h16μkd = \frac{\frac{gh}{8}}{2 \mu_k g} = \frac{h}{16 \mu_k}

Notice that the acceleration due to gravity gg cancels out. Substitute h=0.800 mh = 0.800\text{ m} and μk=0.250\mu_k = 0.250:

d=0.800 m16⋅0.250=0.800 m4.00=0.200 md = \frac{0.800\text{ m}}{16 \cdot 0.250} = \frac{0.800\text{ m}}{4.00} = 0.200\text{ m}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student mistakenly assumes kinetic energy is conserved during the inelastic collision instead of using conservation of momentum, leading to an overestimated initial speed on the rough surface and a stopping distance of 0.800 m.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v1=2gh=2⋅9.80⋅0.800=3.96 m/sv_1 = \sqrt{2gh} = \sqrt{2 \cdot 9.80 \cdot 0.800} = 3.96\text{ m/s}

  2. Step 2

    12m1v12=12(m1+m2)V2  ⟹  V2=m1v12m1+m2=0.500⋅15.682.00=3.92 m2/s2\frac{1}{2}m_1 v_1^2 = \frac{1}{2}(m_1 + m_2)V^2 \implies V^2 = \frac{m_1 v_1^2}{m_1 + m_2} = \frac{0.500 \cdot 15.68}{2.00} = 3.92\text{ m}^2/\text{s}^2

    Correct

    m1v1=(m1+m2)vf  ⟹  vf=m1m1+m2v1=0.5002.00v1=14v1m_1 v_1 = (m_1 + m_2)v_f \implies v_f = \frac{m_1}{m_1 + m_2}v_1 = \frac{0.500}{2.00}v_1 = \frac{1}{4}v_1

    When blocks latch together in a completely inelastic collision, mechanical kinetic energy is not conserved because significant energy is transformed into thermal energy, sound, and internal deformation. You must use conservation of linear momentum to find the post-collision velocity.

  3. Step 3

    d=V22μkg=3.922⋅0.250⋅9.80=0.800 md = \frac{V^2}{2\mu_k g} = \frac{3.92}{2 \cdot 0.250 \cdot 9.80} = 0.800\text{ m}

    Correct

    d=vf22μkg=(14v1)22μkg=0.980 m2/s22⋅0.250⋅9.80 m/s2=0.200 md = \frac{v_f^2}{2\mu_k g} = \frac{\left(\frac{1}{4}v_1\right)^2}{2\mu_k g} = \frac{0.980\text{ m}^2/\text{s}^2}{2 \cdot 0.250 \cdot 9.80\text{ m/s}^2} = 0.200\text{ m}

    Your work-energy setup relating friction and stopping distance was correct, but substituting the overestimated velocity squared from Step 2 carried the error into your final distance.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used conservation of mechanical energy for the descent down the frictionless ramp.

You correctly formulated the stopping distance on the rough surface using the work-energy theorem.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Kinetic Energy Assumed Conserved in Inelastic Collision

You equated initial kinetic energy to post-collision kinetic energy instead of conserving linear momentum during the latching collision.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the conservation laws applicable to collisions. While total linear momentum is conserved in all isolated collisions because internal contact forces cancel out, kinetic energy is only conserved in perfectly elastic collisions. Whenever objects stick together (completely inelastic), mechanical energy is dissipated, so equating kinetic energies is physically invalid.

REASONING PATH
Your ACEpath teacher’s suggested approach
Classify the Collision Type
  • If objects stick, latch, or permanently deform, the collision is inelastic and kinetic energy decreases.

  • Check whether the bodies couple together; if so, immediately write pi=pfp_i = p_f rather than Ki=KfK_i = K_f.

Apply Momentum Conservation
  • For an isolated horizontal collision, ∑mivi=∑mfvf\sum m_i v_i = \sum m_f v_f.

  • Set m1v1+m2v2i=(m1+m2)vfm_1 v_1 + m_2 v_{2i} = (m_1 + m_2)v_f to solve for the combined velocity.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply conservation of linear momentum: m1v1=(m1+m2)vfm_1 v_1 = (m_1 + m_2) v_f

  2. Substitute the masses: vf=0.500 kg0.500 kg+1.50 kgv1=14v1v_f = \frac{0.500\text{ kg}}{0.500\text{ kg} + 1.50\text{ kg}} v_1 = \frac{1}{4} v_1

  3. Compute vf2v_f^2: vf2=116v12=116(2gh)=15.6816=0.980 m2/s2v_f^2 = \frac{1}{16} v_1^2 = \frac{1}{16}(2gh) = \frac{15.68}{16} = 0.980\text{ m}^2/\text{s}^2

  4. Substitute vf2v_f^2 into your stopping distance formula: d=vf22μkg=0.9802⋅0.250⋅9.80=0.200 md = \frac{v_f^2}{2\mu_k g} = \frac{0.980}{2 \cdot 0.250 \cdot 9.80} = 0.200\text{ m}

Final answer

d=0.200 md = 0.200\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the collision classification: momentum is conserved in all isolated collisions, but kinetic energy is conserved only if the problem explicitly specifies an elastic collision.

  • Always flag terms like 'latches', 'sticks together', or 'completely inelastic' as a direct cue to use momentum conservation alone.

OverviewACEpath Teacher's Diagnosis

02 The student forgets that the blocks latch together and only includes m₁ in the denominator of the momentum conservation equation, yielding V = 1.32 m/s and d = 0.356 m.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v1=2gh=2⋅9.80⋅0.800=3.96 m/sv_1 = \sqrt{2gh} = \sqrt{2 \cdot 9.80 \cdot 0.800} = 3.96\text{ m/s}

  2. Step 2

    m1v1=m2V  ⟹  V=0.500⋅3.961.50=1.32 m/sm_1 v_1 = m_2 V \implies V = \frac{0.500 \cdot 3.96}{1.50} = 1.32\text{ m/s}

    Correct

    m1v1=(m1+m2)vf  ⟹  vf=0.500 kg0.500 kg+1.50 kg(3.96 m/s)=0.990 m/sm_1 v_1 = (m_1 + m_2) v_f \implies v_f = \frac{0.500\text{ kg}}{0.500\text{ kg} + 1.50\text{ kg}} (3.96\text{ m/s}) = 0.990\text{ m/s}

    Because the blocks latch together in a completely inelastic collision, they move with a shared velocity vfv_f and a total mass of m1+m2m_1 + m_2. Setting the final momentum equal to m2Vm_2 V ignores the mass of m1m_1 continuing forward.

  3. Step 3

    d=V22μkg=1.3222⋅0.250⋅9.80=1.74244.90=0.356 md = \frac{V^2}{2 \mu_k g} = \frac{1.32^2}{2 \cdot 0.250 \cdot 9.80} = \frac{1.7424}{4.90} = 0.356\text{ m}

    Correct

    d=vf22μkg=(0.990 m/s)22(0.250)(9.80 m/s2)=0.200 md = \frac{v_f^2}{2 \mu_k g} = \frac{(0.990\text{ m/s})^2}{2(0.250)(9.80\text{ m/s}^2)} = 0.200\text{ m}

    Your work-energy formulation d=v22μkgd = \frac{v^2}{2\mu_k g} is mathematically sound, but substituting the incorrect post-collision speed led to an incorrect stopping distance.

WHAT YOU DID WELL
Compliments from Your Teacher

You used conservation of mechanical energy correctly to find the speed at the base of the ramp.

You correctly derived the relationship between stopping distance, initial speed, and friction.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inelastic Collision Mass Omission

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the collision as if the moving block transferred its entire momentum solely into block 2, forgetting that a completely inelastic collision means both blocks stick together and share the total mass (m1+m2)(m_1 + m_2).

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Collision Type
  • When objects stick, latch, or couple together, the collision is completely inelastic.

  • Always write the final momentum as (m1+m2)vf(m_1 + m_2) v_f.

Track All Moving Masses
  • Total linear momentum after a collision must account for every mass that is moving.

  • Double-check whether any colliding body comes to rest or remains part of the moving system.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply conservation of linear momentum for a completely inelastic collision: m1v1=(m1+m2)vfm_1 v_1 = (m_1 + m_2) v_f.

  2. Solve for the coupled speed: vf=0.500 kg0.500 kg+1.50 kg(3.96 m/s)=0.5002.00(3.96 m/s)=0.990 m/sv_f = \frac{0.500\text{ kg}}{0.500\text{ kg} + 1.50\text{ kg}} (3.96\text{ m/s}) = \frac{0.500}{2.00}(3.96\text{ m/s}) = 0.990\text{ m/s}.

  3. Substitute vfv_f into the stopping distance equation: d=vf22μkg=(0.990 m/s)22(0.250)(9.80 m/s2)=0.98014.90=0.200 md = \frac{v_f^2}{2\mu_k g} = \frac{(0.990\text{ m/s})^2}{2(0.250)(9.80\text{ m/s}^2)} = \frac{0.9801}{4.90} = 0.200\text{ m}.

Final answer

d=0.200 md = 0.200\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the definition of completely inelastic collisions and practice setting up (m1+m2)vf(m_1 + m_2)v_f.

  • Work through multi-stage mechanics problems by labeling each stage with its governing conservation law.

OverviewACEpath Teacher's Diagnosis

03 The student omits the factor of 2 in the denominator of the stopping distance formula d = V² / (2a), resulting in double the correct distance, 0.400 m.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v1=2gh=2⋅9.80⋅0.800=3.96 m/sv_1 = \sqrt{2gh} = \sqrt{2 \cdot 9.80 \cdot 0.800} = 3.96\text{ m/s}

  2. Step 2

    V=m1v1m1+m2=0.500⋅3.962.00=0.990 m/sV = \frac{m_1 v_1}{m_1 + m_2} = \frac{0.500 \cdot 3.96}{2.00} = 0.990\text{ m/s}

  3. Step 3

    a=μkg=0.250⋅9.80=2.45 m/s2a = \mu_k g = 0.250 \cdot 9.80 = 2.45\text{ m/s}^2

  4. Step 4

    d=V2a=0.99022.45=0.98012.45=0.400 md = \frac{V^2}{a} = \frac{0.990^2}{2.45} = \frac{0.9801}{2.45} = 0.400\text{ m}

    Correct

    d=V22a=0.99022(2.45)=0.200 md = \frac{V^2}{2a} = \frac{0.990^2}{2(2.45)} = 0.200\text{ m}

    You omitted the factor of 22 in the denominator. From the kinematic relation vf2=vi2−2adv_f^2 = v_i^2 - 2ad with vf=0v_f = 0, the stopping distance is d=V22ad = \frac{V^2}{2a}, or from the work-energy theorem, fkd=12mV2  ⟹  μkmgd=12mV2f_k d = \frac{1}{2} m V^2 \implies \mu_k m g d = \frac{1}{2} m V^2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used mechanical energy conservation to find the block's speed at the bottom of the ramp.

You correctly identified that linear momentum is conserved during the inelastic collision and solved for the coupled speed.

You correctly calculated the deceleration on the rough horizontal patch using the coefficient of kinetic friction.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted Factor of 2 in Stopping Distance

You wrote d=V2ad = \frac{V^2}{a} instead of d=V22ad = \frac{V^2}{2a}, missing the factor of 22 that comes from kinematics or the 12\frac{1}{2} in kinetic energy.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating dimensional or proportional scaling (d∝v2ad \propto \frac{v^2}{a}) with the exact kinematic relationship v2=2adv^2 = 2ad, forgetting to derive or verify the denominator factor of 22.

REASONING PATH
Your ACEpath teacher’s suggested approach
Kinematic Stopping Formula
  • For an object slowing to rest with constant deceleration aa, 02=v02−2ad  ⟹  d=v022a0^2 = v_0^2 - 2ad \implies d = \frac{v_0^2}{2a}.

  • Always write down the full kinematic equation v2=v02+2aΔxv^2 = v_0^2 + 2a\Delta x or work-energy relation before solving for distance.

Work-Energy Consistency Check
  • Work done by friction equals the change in kinetic energy: fkd=12mv02f_k d = \frac{1}{2} m v_0^2.

  • Check that the 12\frac{1}{2} from kinetic energy appears as a factor of 22 in the denominator when dividing by friction force.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall the kinematic equation relating velocity, acceleration, and displacement: vf2=vi2−2adv_f^2 = v_i^2 - 2ad.

  2. Substitute vf=0v_f = 0, vi=V=0.990 m/sv_i = V = 0.990\text{ m/s}, and a=2.45 m/s2a = 2.45\text{ m/s}^2: 0=(0.990)2−2(2.45)d0 = (0.990)^2 - 2(2.45)d.

  3. Solve for dd: d=V22a=0.98014.90=0.200 md = \frac{V^2}{2a} = \frac{0.9801}{4.90} = 0.200\text{ m}.

Final answer

d=0.200 md = 0.200\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check derived formulas against fundamental equations (v2=v02+2aΔxv^2 = v_0^2 + 2a\Delta x or W=ΔKW = \Delta K) to ensure no numerical factors like 12\frac{1}{2} or 22 are dropped.

  • Practice verifying final algebraic formulas with work-energy balance before inserting numerical values.

Lock it in

Similar question

01

A 1.0 kg1.0\text{ kg} block moving at 4.0 m/s4.0\text{ m/s} on a frictionless table collides and locks with a stationary 3.0 kg3.0\text{ kg} block. Calculate the mechanical energy lost during the collision.

Answer

Elost=6.0 JE_{\text{lost}} = 6.0\text{ J}. By momentum conservation, (1.0)(4.0)=(1.0+3.0)vf  ⟹  vf=1.0 m/s(1.0)(4.0) = (1.0 + 3.0)v_f \implies v_f = 1.0\text{ m/s}. The initial kinetic energy is Ki=12(1.0)(4.0)2=8.0 JK_i = \frac{1}{2}(1.0)(4.0)^2 = 8.0\text{ J}, and the final kinetic energy is Kf=12(4.0)(1.0)2=2.0 JK_f = \frac{1}{2}(4.0)(1.0)^2 = 2.0\text{ J}. Thus, ΔK=8.0−2.0=6.0 J\Delta K = 8.0 - 2.0 = 6.0\text{ J} is lost.

02

A 0.200 kg0.200\text{ kg} dart is fired horizontally at 12.0 m/s12.0\text{ m/s} into a 1.80 kg1.80\text{ kg} wooden block initially at rest on a rough horizontal floor (μk=0.300\mu_k = 0.300). The dart embeds into the block. How far does the block slide before coming to rest? (Use g=9.80 m/s2g = 9.80\text{ m/s}^2)

Answer

d≈0.245 md \approx 0.245\text{ m}. Conserving momentum gives (0.200)(12.0)=(0.200+1.80)vf  ⟹  vf=1.20 m/s(0.200)(12.0) = (0.200 + 1.80)v_f \implies v_f = 1.20\text{ m/s}. Then apply the work-energy theorem: d=vf22μkg=(1.20)22(0.300)(9.80)=1.445.88≈0.245 md = \frac{v_f^2}{2\mu_k g} = \frac{(1.20)^2}{2(0.300)(9.80)} = \frac{1.44}{5.88} \approx 0.245\text{ m}.

03

A mass mm is released from height hh down a frictionless ramp and collides head-on with a resting mass 3m3m. Compare the stopping distances on a rough horizontal patch (coefficient μk\mu_k) if: (a) the collision is completely inelastic (masses stick), versus (b) the collision is perfectly elastic. Express both stopping distances in terms of hh and μk\mu_k.

Answer

(a) Inelastic: v1=2ghv_1 = \sqrt{2gh}; momentum gives vf=mm+3mv1=14v1v_f = \frac{m}{m+3m}v_1 = \frac{1}{4}v_1, so dinelastic=vf22μkg=h16μkd_{\text{inelastic}} = \frac{v_f^2}{2\mu_k g} = \frac{h}{16\mu_k}. (b) Elastic: v2f=2mm+3mv1=12v1v_{2f} = \frac{2m}{m+3m}v_1 = \frac{1}{2}v_1, so delastic=v2f22μkg=h4μkd_{\text{elastic}} = \frac{v_{2f}^2}{2\mu_k g} = \frac{h}{4\mu_k} (four times further).

Loading workspace…