Resources

A slender uniform metal rod of mass M=1.50 kgM = 1.50\text{ kg} and length L=0.800 mL = 0.800\text{ m} is pivoted at one end about a fixed, frictionless horizontal pin (where I=13ML2I = \frac{1}{3}ML^2). The rod is released from rest in a horizontal position (angle θ0=0∘\theta_0 = 0^\circ relative to horizontal) and swings downward under gravity (g=9.80 m/s2g = 9.80\text{ m/s}^2). Taking the release height as the reference level for gravitational potential energy (U=0U = 0), the center of mass descends to a lower vertical coordinate. Calculate the rotational kinetic energy KrotK_{\text{rot}} of the rod at the instant it swings through the vertical position.

Answer and steps

Final answer

Krot=5.88 JK_{\text{rot}} = 5.88\text{ J}

Steps

01

Identify the initial mechanical energy

Method: Conservation of Mechanical Energy

Since the pivot is frictionless and gravity is a conservative force, the total mechanical energy of the rod is conserved: Ei=EfE_i = E_f Ki+Ui=Kf+UfK_i + U_i = K_f + U_f

  • The rod is released from rest, so its initial kinetic energy is: Ki=0K_i = 0
  • The horizontal release level is defined as the reference level (U=0U = 0). In this position, the center of mass (CM) of the rod lies on the reference line, so: Ui=0U_i = 0
  • Thus, the total initial energy is: Ei=0E_i = 0
02

Determine the change in gravitational potential energy

For an extended rigid body in a uniform gravitational field, the gravitational potential energy is determined by the vertical position of its center of mass:

U=MgyCMU = M g y_{\text{CM}}

  • For a uniform rod of length LL, the center of mass is located at its geometric center, a distance of L2\frac{L}{2} from the pivot: hCM=L2=0.800 m2=0.400 mh_{\text{CM}} = \frac{L}{2} = \frac{0.800\text{ m}}{2} = 0.400\text{ m}
  • When the rod reaches the vertical position, its center of mass has descended by ΔhCM=L2\Delta h_{\text{CM}} = \frac{L}{2} below the reference line (yf=−L2y_f = -\frac{L}{2}): Uf=−Mg(L2)U_f = -M g \left(\frac{L}{2}\right)

Common Pitfall: A frequent mistake is using the full length LL as the distance fallen. Only the lowest tip of the rod falls by LL; the gravitational potential energy change of the entire rod depends solely on the displacement of its center of mass, L2\frac{L}{2}.

03

Calculate the rotational kinetic energy

Applying conservation of energy:

0=Krot+Uf  ⟹  Krot=−Uf=Mg(L2)0 = K_{\text{rot}} + U_f \implies K_{\text{rot}} = -U_f = M g \left(\frac{L}{2}\right)

Substitute the given numerical values:

Krot=(1.50 kg)(9.80 m/s2)(0.400 m)K_{\text{rot}} = (1.50\text{ kg})(9.80\text{ m/s}^2)(0.400\text{ m})

Krot=5.88 JK_{\text{rot}} = 5.88\text{ J}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student uses the total length of the rod instead of the change in vertical height of its center of mass when calculating potential energy change.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ΔU=−MgL\Delta U = -MgL

    Correct

    ΔU=−MgΔhCM=−Mg(L2)\Delta U = -Mg\Delta h_{\text{CM}} = -Mg\left(\frac{L}{2}\right)

    For an extended rigid body, gravitational potential energy depends on the vertical position of its center of mass. For a uniform rod pivoted at one end, the center of mass drops by L2\frac{L}{2}, not the full length LL.

  2. Step 2

    Krot=−ΔU=MgLK_{\text{rot}} = -\Delta U = MgL

    Correct

    Krot=−ΔU=Mg(L2)K_{\text{rot}} = -\Delta U = Mg\left(\frac{L}{2}\right)

    You correctly set Krot=−ΔUK_{\text{rot}} = -\Delta U using conservation of mechanical energy, but this step inherits the incorrect expression for ΔU\Delta U from Step 1.

  3. Step 3

    Krot=(1.50)(9.80)(0.800)=11.76 JK_{\text{rot}} = (1.50)(9.80)(0.800) = 11.76\text{ J}

    Correct

    Krot=(1.50)(9.80)(0.400)=5.88 JK_{\text{rot}} = (1.50)(9.80)(0.400) = 5.88\text{ J}

    Your numerical substitution and arithmetic are mathematically consistent with your earlier formula, but the result is twice the correct value due to using L=0.800 mL = 0.800\text{ m} instead of ΔhCM=0.400 m\Delta h_{\text{CM}} = 0.400\text{ m}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that mechanical energy is conserved during the swing.

You correctly related the gain in rotational kinetic energy to the decrease in gravitational potential energy.

You substituted the given numerical constants and completed the arithmetic accurately based on your formula.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Center of mass height confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the extended rod as if all its mass fell through the distance traveled by the free tip (LL), rather than tracking the vertical displacement of the center of mass (L/2L/2).

REASONING PATH
Your ACEpath teacher’s suggested approach
Extended Body Potential Energy
  • For any rigid body in a uniform gravitational field, Ug=MgyCMU_g = Mgy_{\text{CM}}.

  • Locate the center of mass first, then calculate only its vertical change in height ΔhCM\Delta h_{\text{CM}}.

Pivot to Center of Mass Distance
  • For a uniform rod of length LL, the center of mass is at its geometric midpoint, a distance of L2\frac{L}{2} from either end.

  • When rotating from horizontal to vertical about an end pivot, the center of mass drops by ΔhCM=L2\Delta h_{\text{CM}} = \frac{L}{2}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the vertical drop of the center of mass: ΔhCM=L2=0.800 m2=0.400 m\Delta h_{\text{CM}} = \frac{L}{2} = \frac{0.800\text{ m}}{2} = 0.400\text{ m}.

  2. Express the change in gravitational potential energy: ΔU=−MgΔhCM=−Mg(L2)\Delta U = -Mg\Delta h_{\text{CM}} = -Mg\left(\frac{L}{2}\right).

  3. Apply conservation of mechanical energy: Krot=−ΔU=Mg(L2)K_{\text{rot}} = -\Delta U = Mg\left(\frac{L}{2}\right).

  4. Substitute the given values: Krot=(1.50 kg)(9.80 m/s2)(0.400 m)=5.88 JK_{\text{rot}} = (1.50\text{ kg})(9.80\text{ m/s}^2)(0.400\text{ m}) = 5.88\text{ J}.

Final answer

Krot=5.88 JK_{\text{rot}} = 5.88\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the principle that gravitational potential energy of an extended body is determined strictly by its center of mass.

  • Practice sketching the initial and final positions of rotating objects and explicitly marking the center of mass before writing energy equations.

OverviewACEpath Teacher's Diagnosis

02 The student mistakenly uses the moment of inertia about the center of mass (1/12 M L²) instead of the given value for a rod pivoted at one end when attempting to relate kinetic energy to angular velocity.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    hcm=L2=0.400 mh_{\text{cm}} = \frac{L}{2} = 0.400\text{ m}

  2. Step 2

    Mghcm=12Iω2  ⟹  I=112ML2=112(1.50)(0.800)2=0.080 kg⋅m2  ⟹  ω2=2MghcmI=2(1.50)(9.80)(0.400)0.080=147 rad2/s2Mg h_{\text{cm}} = \frac{1}{2} I \omega^2 \implies I = \frac{1}{12} M L^2 = \frac{1}{12} (1.50)(0.800)^2 = 0.080\text{ kg}\cdot\text{m}^2 \implies \omega^2 = \frac{2 Mg h_{\text{cm}}}{I} = \frac{2(1.50)(9.80)(0.400)}{0.080} = 147\text{ rad}^2/\text{s}^2

    Correct

    Mghcm=Krot=5.88 JMg h_{\text{cm}} = K_{\text{rot}} = 5.88\text{ J} (or with Ipivot=13ML2=0.320 kg⋅m2I_{\text{pivot}} = \frac{1}{3}ML^2 = 0.320\text{ kg}\cdot\text{m}^2, ω2=2(1.50)(9.80)(0.400)0.320=36.75 rad2/s2\omega^2 = \frac{2(1.50)(9.80)(0.400)}{0.320} = 36.75\text{ rad}^2/\text{s}^2)

    The rod rotates about a fixed pin at its end, not about its center of mass. You substituted I=112ML2I = \frac{1}{12}ML^2 instead of Ipivot=13ML2I_{\text{pivot}} = \frac{1}{3}ML^2, causing your intermediate angular velocity ω2\omega^2 to be 4 times too large.

  3. Step 3

    Krot=12Ipivotω2=12(13ML2)ω2  ⟹  Ipivot=0.320 kg⋅m2  ⟹  Krot=12(0.320)(147)=23.52 JK_{\text{rot}} = \frac{1}{2} I_{\text{pivot}} \omega^2 = \frac{1}{2} (\frac{1}{3} M L^2) \omega^2 \implies I_{\text{pivot}} = 0.320\text{ kg}\cdot\text{m}^2 \implies K_{\text{rot}} = \frac{1}{2} (0.320)(147) = 23.52\text{ J}

    Correct

    Krot=Mghcm=(1.50 kg)(9.80 m/s2)(0.400 m)=5.88 JK_{\text{rot}} = Mg h_{\text{cm}} = (1.50\text{ kg})(9.80\text{ m/s}^2)(0.400\text{ m}) = 5.88\text{ J}

    Although you used the correct formula for IpivotI_{\text{pivot}} in this step, substituting the overstated ω2=147 rad2/s2\omega^2 = 147\text{ rad}^2/\text{s}^2 from Step 2 carried the error into your final kinetic energy.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly located the center of mass at L/2L/2 and calculated its descent distance as 0.400 m0.400\text{ m}.

You correctly identified the principle of conservation of mechanical energy between the horizontal and vertical positions.

You used the correct moment of inertia formula I=13ML2I = \frac{1}{3}ML^2 when evaluating IpivotI_{\text{pivot}} in your final step.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Wrong axis for moment of inertia / Unnecessary intermediate variable

You accidentally selected the center-of-mass formula 112ML2\frac{1}{12}ML^2 instead of the end-pivot formula 13ML2\frac{1}{3}ML^2 when solving for ω2\omega^2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated rotation about a fixed end pivot as two disconnected steps—first finding ω\omega using the center-of-mass formula, then recalculating kinetic energy using the end-pivot formula—overlooking that conservation of energy directly equates KrotK_{\text{rot}} to the loss in gravitational potential energy ΔU\Delta U.

REASONING PATH
Your ACEpath teacher’s suggested approach
Direct Energy Transfer
  • For a system released from rest with no non-conservative work, ΔK=−ΔU\Delta K = -\Delta U, meaning Krot=MgΔhcmK_{\text{rot}} = Mg\Delta h_{\text{cm}} directly.

  • Check whether the question asks for KrotK_{\text{rot}} or ω\omega. If only KrotK_{\text{rot}} is requested, equate it directly to ΔU\Delta U without calculating ω\omega.

Consistent Axis of Rotation
  • When an object rotates about a fixed axis, all rotational quantities (II, ω\omega, KrotK_{\text{rot}}) must reference that same fixed pivot axis: Iend=13ML2I_{\text{end}} = \frac{1}{3}ML^2.

  • Always identify the physical rotation axis first and ensure the exact same axis is used in every equation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. By conservation of mechanical energy, the initial energy equals the final energy: Ei=EfE_i = E_f.

  2. Because the rod is released from rest, Ki=0K_i = 0. Taking the horizontal position as U=0U=0, we have Ei=0E_i = 0.

  3. At the vertical position, the center of mass has descended by Δhcm=L2=0.400 m\Delta h_{\text{cm}} = \frac{L}{2} = 0.400\text{ m}, so Uf=−Mg(L2)U_f = -Mg\left(\frac{L}{2}\right).

  4. Equating energies: 0=Krot+Uf  ⟹  Krot=Mg(L2)0 = K_{\text{rot}} + U_f \implies K_{\text{rot}} = Mg\left(\frac{L}{2}\right).

  5. Substitute the values: Krot=(1.50 kg)(9.80 m/s2)(0.400 m)=5.88 JK_{\text{rot}} = (1.50\text{ kg})(9.80\text{ m/s}^2)(0.400\text{ m}) = 5.88\text{ J}.

Final answer

Krot=5.88 JK_{\text{rot}} = 5.88\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice bypassing intermediate kinematics variables when energy conservation directly yields the target quantity.

  • Review the standard moment of inertia values for uniform rods: about the center of mass (Icm=112ML2I_{\text{cm}} = \frac{1}{12}ML^2) versus about an end (Iend=13ML2I_{\text{end}} = \frac{1}{3}ML^2).

OverviewACEpath Teacher's Diagnosis

03 The student includes an extra 1/2 factor in the potential energy change by treating gravity as acting on a distributed triangular force profile.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    hcm=L2=0.400 mh_{\text{cm}} = \frac{L}{2} = 0.400\text{ m}

  2. Step 2

    ΔU=−12Mghcm\Delta U = -\frac{1}{2} M g h_{\text{cm}}

    Correct

    ΔU=−Mghcm\Delta U = -M g h_{\text{cm}}

    The gravitational potential energy of an extended object in a uniform gravitational field is simply U=MgycmU = M g y_{\text{cm}}. Because the vertical drop of the center of mass already accounts for the mass distribution, introducing an extra factor of 12\frac{1}{2} is incorrect.

  3. Step 3

    Krot=12Mghcm  ⟹  Krot=12(1.50)(9.80)(0.400)=2.94 JK_{\text{rot}} = \frac{1}{2} M g h_{\text{cm}} \implies K_{\text{rot}} = \frac{1}{2}(1.50)(9.80)(0.400) = 2.94\text{ J}

    Correct

    Krot=Mghcm=(1.50 kg)(9.80 m/s2)(0.400 m)=5.88 JK_{\text{rot}} = M g h_{\text{cm}} = (1.50\text{ kg})(9.80\text{ m/s}^2)(0.400\text{ m}) = 5.88\text{ J}

    Your energy conservation relation and arithmetic correctly followed your expression from Step 2, but the value is halved due to the earlier error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly found the center-of-mass descent distance as hcm=L2=0.400 mh_{\text{cm}} = \frac{L}{2} = 0.400\text{ m}.

You correctly applied the work-energy principle that the decrease in gravitational potential energy equals the rotational kinetic energy gained.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Double-counting the averaging factor in gravitational potential energy

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You included an extra factor of 12\frac{1}{2} in the potential energy change expression ΔU=−12Mghcm\Delta U = -\frac{1}{2}Mgh_{\text{cm}}. When evaluating gravitational potential energy for an extended body, treating all mass MM at the center of mass coordinate ycmy_{\text{cm}} already integrates the distribution, so no additional factor of 12\frac{1}{2} should be applied.

REASONING PATH
Your ACEpath teacher’s suggested approach
Gravitational potential energy of a rigid body
  • Ug=MgycmU_g = M g y_{\text{cm}}

  • Always treat the entire mass MM as concentrated at the center of mass; never add another fractional factor to MgycmM g y_{\text{cm}}.

Energy conservation for rotation about a fixed pivot
  • Krot=−ΔUg=Mg(ycm,i−ycm,f)K_{\text{rot}} = -\Delta U_g = M g (y_{\text{cm}, i} - y_{\text{cm}, f})

  • Calculate the vertical displacement Δycm\Delta y_{\text{cm}} first, then multiply directly by the total weight MgMg.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Express the change in gravitational potential energy using the center-of-mass height: ΔU=−Mghcm\Delta U = -M g h_{\text{cm}}.

  2. Equate the lost potential energy to rotational kinetic energy: Krot=−ΔU=MghcmK_{\text{rot}} = -\Delta U = M g h_{\text{cm}}.

  3. Substitute the numerical values: Krot=(1.50 kg)(9.80 m/s2)(0.400 m)=5.88 JK_{\text{rot}} = (1.50\text{ kg})(9.80\text{ m/s}^2)(0.400\text{ m}) = 5.88\text{ J}.

Final answer

Krot=5.88 JK_{\text{rot}} = 5.88\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the derivation showing that ∫gy dm=g∫y dm=Mgycm\int g y \, dm = g \int y \, dm = M g y_{\text{cm}} to see why the factor of 12\frac{1}{2} is already contained in ycmy_{\text{cm}}.

  • Solve the practice problems below to reinforce calculating ΔU\Delta U directly from center-of-mass coordinates without extra factors.

Lock it in

Similar question

01

A uniform thin rod of mass M=2.0 kgM = 2.0\text{ kg} and length L=1.2 mL = 1.2\text{ m} is pivoted at one end. It is held vertically upward above the pivot and released from rest. What is its rotational kinetic energy when it reaches the vertically downward position? (Take g=9.8 m/s2g = 9.8\text{ m/s}^2.)

Answer

Krot=23.52 JK_{\text{rot}} = 23.52\text{ J}. The center of mass starts at +L/2+L/2 above the pivot and ends at −L/2-L/2 below the pivot, so ΔhCM=L=1.2 m\Delta h_{\text{CM}} = L = 1.2\text{ m}. By conservation of energy, Krot=MgL=(2.0)(9.8)(1.2)=23.52 JK_{\text{rot}} = MgL = (2.0)(9.8)(1.2) = 23.52\text{ J}.

02

A uniform rectangular plate of mass M=3.0 kgM = 3.0\text{ kg}, height H=0.60 mH = 0.60\text{ m}, and width W=0.40 mW = 0.40\text{ m} is pivoted along its top horizontal edge. It is released from rest when held horizontally. Calculate its rotational kinetic energy as it swings through the vertical position. (Take g=9.8 m/s2g = 9.8\text{ m/s}^2.)

Answer

Krot=8.82 JK_{\text{rot}} = 8.82\text{ J}. The center of mass is at a distance H/2=0.30 mH/2 = 0.30\text{ m} from the top pivot axis. When swinging from horizontal to vertical, the center of mass drops by ΔhCM=0.30 m\Delta h_{\text{CM}} = 0.30\text{ m}. Thus, Krot=Mg(H/2)=(3.0)(9.8)(0.30)=8.82 JK_{\text{rot}} = Mg(H/2) = (3.0)(9.8)(0.30) = 8.82\text{ J}.

03

A non-uniform rod of mass M=1.8 kgM = 1.8\text{ kg} and length L=1.0 mL = 1.0\text{ m} is pivoted at one end. Due to a density gradient, its center of mass is located at a distance of 23L\frac{2}{3}L from the pivot. The rod is released from rest from a horizontal position. Find its rotational kinetic energy as it passes through the vertical position. (Take g=9.8 m/s2g = 9.8\text{ m/s}^2.)

Answer

Krot=11.76 JK_{\text{rot}} = 11.76\text{ J}. The center of mass descends by ΔhCM=23L=23(1.0 m)=0.667 m\Delta h_{\text{CM}} = \frac{2}{3}L = \frac{2}{3}(1.0\text{ m}) = 0.667\text{ m}. Applying conservation of energy, Krot=Mg(23L)=(1.8)(9.8)(2/3)=11.76 JK_{\text{rot}} = Mg\left(\frac{2}{3}L\right) = (1.8)(9.8)(2/3) = 11.76\text{ J}.

Loading workspace…