Resources

A stationary single-turn circular loop of radius r=0.10 mr = 0.10\text{ m} and resistance R=0.50 ΩR = 0.50\ \Omega lies in the xyxy-plane with its unit normal vector pointing in the +z+z-direction (out of the page). A time-dependent uniform magnetic field is given by B⃗(t)=(0.80−0.40t)k^ T\vec{B}(t) = (0.80 - 0.40t)\hat{k}\text{ T}, where tt is measured in seconds. Using Faraday's law in full vector form E=−dΦBdt\mathcal{E} = -\frac{d\Phi_B}{dt} and applying the right-hand rule convention (where positive circulation is counterclockwise relative to +k^+\hat{k}), determine the signed value of the induced electromotive force E\mathcal{E} and state whether the induced current circulates clockwise or counterclockwise when viewed from above (looking down the −z-z-direction).

Answer and steps

Final answer

E=+0.0126 V\mathcal{E} = +0.0126\text{ V} (+4.00π×10−3 V+4.00\pi \times 10^{-3}\text{ V}); Direction: Counterclockwise

Steps

01

Calculate the Area Vector of the Loop

The loop is circular with radius r=0.10 mr = 0.10\text{ m}. The magnitude of the surface area bounded by the loop is:

A=πr2=π(0.10 m)2=0.010π m2A = \pi r^2 = \pi (0.10\text{ m})^2 = 0.010\pi\text{ m}^2

According to the given coordinate system, the unit normal vector points in the +z+z-direction: n^=+k^\hat{n} = +\hat{k}. Therefore, the oriented area vector is:

A⃗=An^=0.010πk^ m2\vec{A} = A\hat{n} = 0.010\pi\hat{k}\text{ m}^2


02

Determine the Magnetic Flux as a Function of Time

The magnetic field is spatially uniform and parallel to k^\hat{k}:

B⃗(t)=(0.80−0.40t)k^ T\vec{B}(t) = (0.80 - 0.40t)\hat{k}\text{ T}

The magnetic flux ΦB(t)\Phi_B(t) through the loop is the dot product of the magnetic field and the area vector:

ΦB(t)=B⃗(t)⋅A⃗=(0.80−0.40t)(0.010π)=(8.00π×10−3−4.00π×10−3t) Wb\Phi_B(t) = \vec{B}(t) \cdot \vec{A} = (0.80 - 0.40t)(0.010\pi) = (8.00\pi \times 10^{-3} - 4.00\pi \times 10^{-3}t)\text{ Wb}


03

Compute the Induced Electromotive Force (E\mathcal{E})

Taking the time derivative of the magnetic flux gives:

dΦBdt=−4.00π×10−3 Wb/s\frac{d\Phi_B}{dt} = -4.00\pi \times 10^{-3}\text{ Wb/s}

Applying Faraday's law of induction in vector form:

E=−dΦBdt=−(−4.00π×10−3 V)=+4.00π×10−3 V≈+0.0126 V\mathcal{E} = -\frac{d\Phi_B}{dt} = -(-4.00\pi \times 10^{-3}\text{ V}) = +4.00\pi \times 10^{-3}\text{ V} \approx +0.0126\text{ V}


04

Determine the Direction of the Induced Current

  • Sign Convention (Right-Hand Rule): By definition, if the normal vector points in the +k^+\hat{k} direction (toward the observer looking down from above), curling the fingers of the right hand along the perimeter corresponds to a counterclockwise circulation when the thumb points along +k^+\hat{k}.
  • Current Direction: Because the calculated induced emf is positive (E>0\mathcal{E} > 0), the induced current circulates in the positive defined direction, which is counterclockwise.
  • Lenz's Law Check: The external magnetic field points outward (+k^+\hat{k}) and its magnitude decreases over time (dBdt<0\frac{dB}{dt} < 0). To oppose the decrease in outward flux, the induced current must generate an induced magnetic field that also points outward (+k^+\hat{k}). By the right-hand rule for loops, an outward induced field requires a counterclockwise current.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student omits the negative sign in Faraday's law, calculating the induced electromotive force as dΦ_B/dt rather than -dΦ_B/dt and consequently concluding the circulation is clockwise.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    A=πr2=π(0.10)2=0.01π m2A = \pi r^2 = \pi (0.10)^2 = 0.01\pi\text{ m}^2 ⟹\Longrightarrow dBdt=−0.40 T/s\frac{dB}{dt} = -0.40\text{ T/s}

  2. Step 2

    E=dΦBdt=A(dBdt)E = \frac{d\Phi_B}{dt} = A\left(\frac{dB}{dt}\right) ⟹\Longrightarrow E=0.01π⋅(−0.40)=−0.004π V≈−0.013 VE = 0.01\pi \cdot (-0.40) = -0.004\pi\text{ V} \approx -0.013\text{ V}

    Correct

    E=−dΦBdt=−AdBdt=−(0.010π)(−0.40)=+0.004π V≈+0.0126 V\mathcal{E} = -\frac{d\Phi_B}{dt} = -A\frac{dB}{dt} = -(0.010\pi)(-0.40) = +0.004\pi\text{ V} \approx +0.0126\text{ V}

    Faraday's law in signed vector form contains an explicit minus sign representing Lenz's law: E=−dΦBdt\mathcal{E} = -\frac{d\Phi_B}{dt}. Omitting this minus sign flipped the sign of your induced emf from positive to negative.

  3. Step 3

    Since E<0E < 0, the induced current flows opposite to the positive direction. ⟹\Longrightarrow Direction: clockwise

    Correct

    Since E>0\mathcal{E} > 0, the induced current circulates in the defined positive direction (counterclockwise relative to +k^+\hat{k}).

    Your logic connecting the sign of the emf to the circulation direction was correct, but because your calculated emf carried the wrong sign from Step 2, your final circulation direction was reversed.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly computed the geometric area of the single-turn circular loop.

You accurately evaluated the time derivative of the magnetic field dBdt\frac{dB}{dt}.

You properly understood that a negative emf indicates current flowing opposite to the right-hand rule reference direction.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of negative sign in Faraday's law

You omitted the leading negative sign in Faraday's law E=−dΦBdt\mathcal{E} = -\frac{d\Phi_B}{dt}, treating the formula as E=dΦBdt\mathcal{E} = \frac{d\Phi_B}{dt}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the magnitude of induced emf with signed vector circulation, forgetting that Lenz's law is mathematically embedded in the explicit negative sign of Faraday's flux rule.

REASONING PATH
Your ACEpath teacher’s suggested approach
Faraday's Law Minus Sign
  • E=−dΦBdt\mathcal{E} = -\frac{d\Phi_B}{dt}

  • Always include the explicit minus sign when computing the signed electromotive force relative to a chosen normal vector n^\hat{n}.

Physical Verification with Lenz's Law
  • Induced current creates an induced field B⃗ind\vec{B}_{\text{ind}} that opposes the change in magnetic flux.

  • Check whether flux is increasing or decreasing: here outward flux is decreasing, so the loop must generate outward magnetic field (+k^+\hat{k}), requiring counterclockwise current by the right-hand rule.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write Faraday's law with the correct negative sign: E=−dΦBdt=−AdBdt\mathcal{E} = -\frac{d\Phi_B}{dt} = -A\frac{dB}{dt}.

  2. Substitute A=0.010π m2A = 0.010\pi\text{ m}^2 and dBdt=−0.40 T/s\frac{dB}{dt} = -0.40\text{ T/s}: E=−(0.010π)(−0.40)=+4.00π×10−3 V≈+0.0126 V\mathcal{E} = -(0.010\pi)(-0.40) = +4.00\pi \times 10^{-3}\text{ V} \approx +0.0126\text{ V}.

  3. Because E>0\mathcal{E} > 0, the current flows along the defined positive circulation direction (counterclockwise when viewed from above).

Final answer

E=+0.0126 V\mathcal{E} = +0.0126\text{ V} (+4.00π×10−3 V+4.00\pi \times 10^{-3}\text{ V}); Direction: counterclockwise

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write down the full formula E=−dΦBdt\mathcal{E} = -\frac{d\Phi_B}{dt} with the minus sign before substituting numerical values.

  • Use Lenz's physical rule as an independent sanity check on the sign of your mathematical circulation.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to square the radius when calculating the loop area, using 2πr instead of πr², resulting in an incorrect emf magnitude.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    A=2πr=2π(0.10)=0.20π m2A = 2\pi r = 2\pi(0.10) = 0.20\pi\text{ m}^2

    Correct

    A=πr2=π(0.10 m)2=0.010π m2A = \pi r^2 = \pi (0.10\text{ m})^2 = 0.010\pi\text{ m}^2

    You used the circle circumference formula 2πr2\pi r rather than the circular area formula πr2\pi r^2 to compute the surface area of the loop.

  2. Step 2

    dΦBdt=A(dBdt)=0.20π⋅(−0.40)=−0.08π Wb/s\frac{d\Phi_B}{dt} = A\left(\frac{dB}{dt}\right) = 0.20\pi \cdot (-0.40) = -0.08\pi\text{ Wb/s}

    Correct

    dΦBdt=A(dBdt)=0.010π⋅(−0.40)=−4.00π×10−3 Wb/s\frac{d\Phi_B}{dt} = A\left(\frac{dB}{dt}\right) = 0.010\pi \cdot (-0.40) = -4.00\pi \times 10^{-3}\text{ Wb/s}

    Your derivative step and substitution of dBdt=−0.40 T/s\frac{dB}{dt} = -0.40\text{ T/s} are conceptually correct, but the result inherits the incorrect area value from Step 1.

  3. Step 3

    E=−dΦBdt=−(−0.08π)=+0.08π V≈+0.25 VE = -\frac{d\Phi_B}{dt} = -(-0.08\pi) = +0.08\pi\text{ V} \approx +0.25\text{ V}

    Correct

    E=−dΦBdt=−(−4.00π×10−3 V)=+4.00π×10−3 V≈+0.0126 V\mathcal{E} = -\frac{d\Phi_B}{dt} = -(-4.00\pi \times 10^{-3}\text{ V}) = +4.00\pi \times 10^{-3}\text{ V} \approx +0.0126\text{ V}

    You correctly applied Faraday's sign convention E=−dΦBdt\mathcal{E} = -\frac{d\Phi_B}{dt}, but the numerical value carries forward the earlier area error.

  4. Step 4

    Since E>0, the induced current circulates in the positive direction. Direction: counterclockwise\text{Since } E > 0\text{, the induced current circulates in the positive direction. Direction: counterclockwise}

WHAT YOU DID WELL
Compliments from Your Teacher

You identified the time derivative of the magnetic field dBdt=−0.40 T/s\frac{dB}{dt} = -0.40\text{ T/s} accurately from the linear function.

You applied the negative sign in Faraday's law E=−dΦBdt\mathcal{E} = -\frac{d\Phi_B}{dt} without dropping signs.

You correctly linked a positive emf value to counterclockwise circulation via the right-hand rule.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Geometric Formula Confusion

You accidentally wrote the circumference formula 2πr2\pi r when calculating the bounded area AA of the loop.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing linear perimeter (2πr2\pi r) with enclosed planar surface area (πr2\pi r^2) when evaluating magnetic flux through a circular boundary.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimension and Unit Check for Area
  • Planar area requires units of m2\text{m}^2 and quadratic length dependence (r2r^2).

  • Always verify that your area expression contains r2r^2 (giving m2\text{m}^2), whereas perimeter or circumference has single length units (rr, giving m\text{m}).

Flux Calculation Setup
  • For a flat loop of radius rr in a uniform perpendicular magnetic field, ΦB=B⋅A=B(πr2)\Phi_B = B \cdot A = B(\pi r^2).

  • Write out the symbolic area A=πr2A = \pi r^2 before plugging in numerical values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recalculate the area using A=πr2=π(0.10 m)2=0.010π m2A = \pi r^2 = \pi (0.10\text{ m})^2 = 0.010\pi\text{ m}^2.

  2. Compute the rate of change of flux: dΦBdt=AdBdt=(0.010π)(−0.40)=−4.00π×10−3 Wb/s\frac{d\Phi_B}{dt} = A\frac{dB}{dt} = (0.010\pi)(-0.40) = -4.00\pi \times 10^{-3}\text{ Wb/s}.

  3. Apply Faraday's law: E=−dΦBdt=−(−4.00π×10−3 V)=+4.00π×10−3 V≈+0.0126 V\mathcal{E} = -\frac{d\Phi_B}{dt} = -(-4.00\pi \times 10^{-3}\text{ V}) = +4.00\pi \times 10^{-3}\text{ V} \approx +0.0126\text{ V}.

Final answer

E=+4.00π×10−3 V≈+0.0126 V\mathcal{E} = +4.00\pi \times 10^{-3}\text{ V} \approx +0.0126\text{ V}; Direction: Counterclockwise

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check geometric formulas before substituting values: circular area is always πr2\pi r^2, while boundary length is 2πr2\pi r.

  • Perform a quick dimensional check whenever computing physical quantities to ensure the units match.

OverviewACEpath Teacher's Diagnosis

03 The student misinterprets the sign convention, assuming a negative time derivative of the magnetic field implies a clockwise induced emf rather than using the formal sign from Faraday's law.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    A=π(0.10)2=0.01π m2A = \pi (0.10)^2 = 0.01\pi\text{ m}^2

  2. Step 2

    dΦBdt=0.01π⋅(−0.40)=−0.004π Wb/s\frac{d\Phi_B}{dt} = 0.01\pi \cdot (-0.40) = -0.004\pi\text{ Wb/s}

  3. Step 3

    E=−dΦBdt=+0.004π V≈+0.013 VE = -\frac{d\Phi_B}{dt} = +0.004\pi\text{ V} \approx +0.013\text{ V}

  4. Step 4

    Because BB is decreasing over time, the induced circulation opposes the normal vector. Direction: clockwise

    Correct

    Because E>0\mathcal{E} > 0, the induced current circulates in the positive direction defined by n^=+k^\hat{n} = +\hat{k}, which is counterclockwise.

    A positive value of E\mathcal{E} means the current flows in the reference direction defined by the right-hand rule about n^\hat{n}. Since the normal points out of the page (+k^+\hat{k}), curling your right hand with the thumb along +k^+\hat{k} gives a counterclockwise direction. Alternatively, via Lenz's law, because the outward flux is decreasing, the induced current must generate an outward magnetic field to oppose the decrease, which also requires a counterclockwise circulation.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the cross-sectional area of the loop.

You correctly found the time derivative of the magnetic flux, including its negative sign.

You correctly substituted the flux derivative into Faraday's law to get a positive induced electromotive force.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign convention & Lenz's law misinterpretation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You interpreted Lenz's law as always opposing the direction of the magnetic field or normal vector, rather than opposing the change in magnetic flux. In addition, you overlooked the formal sign convention: when Faraday's law yields E>0\mathcal{E} > 0, the induced current flows in the defined positive circulation direction (counterclockwise relative to +k^+\hat{k}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Mathematical Sign of Faraday's Law
  • In E=−dΦBdt\mathcal{E} = -\frac{d\Phi_B}{dt}, the sign of E\mathcal{E} is relative to the loop's orientation defined by n^\hat{n} via the right-hand rule: E>0\mathcal{E} > 0 means the circulation is in the positive right-hand sense.

  • Check the sign of E\mathcal{E}: if E>0\mathcal{E} > 0, the current circulates in the positive direction (counterclockwise for +k^+\hat{k}).

Physical Direction via Lenz's Law
  • Lenz's law states that induced current opposes the change in magnetic flux, not the magnetic field itself. If outward flux decreases, the induced field must point outward to reinforce it.

  • Identify whether flux is increasing or decreasing. If decreasing, point B⃗ind\vec{B}_{\text{ind}} along the original field; use the right-hand grip rule to find the loop current direction.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Observe that the computed electromotive force is positive: E=+4.00π×10−3 V>0\mathcal{E} = +4.00\pi \times 10^{-3}\text{ V} > 0.

  2. Apply the standard right-hand rule convention: point your right thumb along the normal vector n^=+k^\hat{n} = +\hat{k} (out of the page). Your fingers curl counterclockwise.

  3. Because E\mathcal{E} is positive, the induced current flows along this positive circulation direction, meaning it is counterclockwise.

Final answer

E=+4.00π×10−3 V≈+0.0126 V\mathcal{E} = +4.00\pi \times 10^{-3}\text{ V} \approx +0.0126\text{ V}; Direction: Counterclockwise

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice using the right-hand rule to link the positive sign of E\mathcal{E} directly to loop circulation.

  • Review Lenz's law scenarios where flux is decreasing to remember that induced fields reinforce decreasing fields rather than opposing them.

Lock it in

Similar question

01

A square loop with side length s=0.20 ms = 0.20\text{ m} lies in the xyxy-plane with normal vector n^=+k^\hat{n} = +\hat{k}. A spatially uniform magnetic field is given by B⃗(t)=(1.5−0.50t)k^ T\vec{B}(t) = (1.5 - 0.50t)\hat{k}\text{ T}. Calculate the signed induced electromotive force E\mathcal{E} and state whether the induced current flows clockwise or counterclockwise when viewed from above.

Answer

E=+0.020 V\mathcal{E} = +0.020\text{ V}; Direction: counterclockwise. Key steps: A=(0.20)2=0.040 m2A = (0.20)^2 = 0.040\text{ m}^2, dBdt=−0.50 T/s\frac{dB}{dt} = -0.50\text{ T/s}, so E=−AdBdt=−(0.040)(−0.50)=+0.020 V\mathcal{E} = -A\frac{dB}{dt} = -(0.040)(-0.50) = +0.020\text{ V}. Since E>0\mathcal{E} > 0, circulation follows the right-hand rule around +k^+\hat{k} (counterclockwise).

02

A circular coil of 20 tightly wound turns has radius r=0.050 mr = 0.050\text{ m} and normal vector n^=+k^\hat{n} = +\hat{k}. The magnetic field through the coil is B⃗(t)=(0.20+4.0t2)k^ T\vec{B}(t) = (0.20 + 4.0t^2)\hat{k}\text{ T}. Determine the signed induced emf E\mathcal{E} at t=1.5 st = 1.5\text{ s} and state the circulation direction.

Answer

E≈−1.88 V\mathcal{E} \approx -1.88\text{ V} (−0.60π V-0.60\pi\text{ V}); Direction: clockwise. Key steps: A=π(0.050)2=0.0025π m2A = \pi(0.050)^2 = 0.0025\pi\text{ m}^2. For N=20N = 20 turns, E=−NdΦ1dt=−NAdBdt\mathcal{E} = -N\frac{d\Phi_1}{dt} = -N A \frac{dB}{dt}. At t=1.5 st = 1.5\text{ s}, dBdt=8.0t=12 T/s\frac{dB}{dt} = 8.0t = 12\text{ T/s}. Thus E=−(20)(0.0025π)(12)=−0.60π V≈−1.88 V\mathcal{E} = -(20)(0.0025\pi)(12) = -0.60\pi\text{ V} \approx -1.88\text{ V}. Since E<0\mathcal{E} < 0, circulation is opposite to counterclockwise, hence clockwise.

03

A planar loop of area A=0.030 m2A = 0.030\text{ m}^2 with normal n^=+k^\hat{n} = +\hat{k} is immersed in an oscillating field B⃗(t)=0.80cos⁡(50πt)k^ T\vec{B}(t) = 0.80\cos(50\pi t)\hat{k}\text{ T}. Derive the expression for the signed induced emf E(t)\mathcal{E}(t) and evaluate both its sign and circulation direction at t=0.010 st = 0.010\text{ s}.

Answer

E(t)=1.2πsin⁡(50πt) V\mathcal{E}(t) = 1.2\pi\sin(50\pi t)\text{ V}; at t=0.010 st = 0.010\text{ s}, E=+1.2π V≈+3.77 V\mathcal{E} = +1.2\pi\text{ V} \approx +3.77\text{ V}; Direction: counterclockwise. Key steps: ΦB(t)=AB(t)=0.024cos⁡(50πt) Wb\Phi_B(t) = A B(t) = 0.024\cos(50\pi t)\text{ Wb}. By Faraday's law, E(t)=−dΦBdt=−[0.024(−50πsin⁡(50πt))]=1.2πsin⁡(50πt) V\mathcal{E}(t) = -\frac{d\Phi_B}{dt} = -[0.024(-50\pi\sin(50\pi t))] = 1.2\pi\sin(50\pi t)\text{ V}. At t=0.010 st = 0.010\text{ s}, the argument is 50π(0.010)=0.5π rad50\pi(0.010) = 0.5\pi\text{ rad}, so sin⁡(0.5π)=1\sin(0.5\pi) = 1. Thus E=+1.2π V>0\mathcal{E} = +1.2\pi\text{ V} > 0, giving counterclockwise circulation.

Loading workspace…