Resources

A heat engine operates reversibly between a fixed high-temperature source at TH=800 KT_H = 800\text{ K} and an environment whose cold reservoir temperature TCT_C can be lowered arbitrarily. As TC→0 KT_C \to 0\text{ K}, evaluate the asymptotic limit of the engine's thermal efficiency η\eta. If the engine absorbs QH=5.00×103 JQ_H = 5.00\times 10^3\text{ J} per cycle and operates at an environmental temperature of TC=4.20 KT_C = 4.20\text{ K} (liquid helium temperature), calculate the engine's theoretical efficiency η\eta and the residual waste heat QCQ_C rejected per cycle.

Answer and steps

Final answer

lim⁡TC→0 Kη=100%\lim_{T_C \to 0\text{ K}} \eta = 100\%; at TC=4.20 KT_C = 4.20\text{ K}, η=99.5%\eta = 99.5\% and QC=26.3 JQ_C = 26.3\text{ J}

Steps

01

Carnot Efficiency and Asymptotic Limit

A reversible heat engine operating between two thermal reservoirs is a Carnot engine. Its thermal efficiency η\eta is determined solely by the absolute temperatures of the hot reservoir (THT_H) and the cold reservoir (TCT_C):

η=1−TCTH\eta = 1 - \frac{T_C}{T_H}

Taking the limit as the cold reservoir temperature approaches absolute zero (TC→0 KT_C \to 0\text{ K}) while keeping TH=800 KT_H = 800\text{ K} fixed:

lim⁡TC→0 Kη=lim⁡TC→0 K(1−TCTH)=1−0=1=100%\lim_{T_C \to 0\text{ K}} \eta = \lim_{T_C \to 0\text{ K}} \left(1 - \frac{T_C}{T_H}\right) = 1 - 0 = 1 = 100\%

Thermodynamic Note: Although the theoretical Carnot limit reaches 100%100\% as TC→0 KT_C \to 0\text{ K}, the Third Law of Thermodynamics states that absolute zero cannot be attained in a finite number of steps, meaning a true 100%100\% conversion of heat into work remains an idealized asymptote.


02

Efficiency at TC=4.20 KT_C = 4.20\text{ K}

Given:

  • Hot reservoir temperature: TH=800 KT_H = 800\text{ K}
  • Cold reservoir temperature: TC=4.20 KT_C = 4.20\text{ K}
  • Heat input: QH=5.00×103 JQ_H = 5.00 \times 10^3\text{ J}

Substitute the temperatures into the Carnot efficiency formula:

η=1−4.20 K800 K=1−0.00525=0.99475\eta = 1 - \frac{4.20\text{ K}}{800\text{ K}} = 1 - 0.00525 = 0.99475

Expressed as a percentage to three significant figures:

η≈99.5%\eta \approx 99.5\%


03

Residual Waste Heat Rejected (QCQ_C)

For a reversible engine, the ratio of heat transferred to reservoir temperature is conserved:

QCQH=TCTH\frac{Q_C}{Q_H} = \frac{T_C}{T_H}

Rearranging to solve for the rejected heat QCQ_C:

QC=QH⋅TCTHQ_C = Q_H \cdot \frac{T_C}{T_H}

Substitute the numerical values:

QC=(5.00×103 J)⋅(4.20 K800 K)=5.00×103⋅0.00525=26.25 JQ_C = (5.00 \times 10^3\text{ J}) \cdot \left(\frac{4.20\text{ K}}{800\text{ K}}\right) = 5.00 \times 10^3 \cdot 0.00525 = 26.25\text{ J}

Rounding to three significant figures gives:

QC≈26.3 JQ_C \approx 26.3\text{ J}

(Alternatively, using energy conservation: W=η⋅QH=0.99475⋅5000 J=4973.75 JW = \eta \cdot Q_H = 0.99475 \cdot 5000\text{ J} = 4973.75\text{ J}, so QC=QH−W=5000 J−4973.75 J=26.25 J≈26.3 JQ_C = Q_H - W = 5000\text{ J} - 4973.75\text{ J} = 26.25\text{ J} \approx 26.3\text{ J}.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student inverts the temperature ratio in the efficiency formula as T_H / T_C, leading to an unphysical negative efficiency.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    η=1−THTC  ⟹  As TC→0 K,THTC→∞, so η→−∞\eta = 1 - \frac{T_H}{T_C} \implies \text{As } T_C \to 0\text{ K}, \frac{T_H}{T_C} \to \infty, \text{ so } \eta \to -\infty

    Correct

    η=1−TCTH  ⟹  lim⁡TC→0 Kη=1−0800=1 (or 100%)\eta = 1 - \frac{T_C}{T_H} \implies \lim_{T_C \to 0\text{ K}} \eta = 1 - \frac{0}{800} = 1\text{ (or } 100\%\text{)}

    You inverted the reservoir temperatures in the Carnot efficiency formula. The thermal efficiency is defined by η=1−QCQH=1−TCTH\eta = 1 - \frac{Q_C}{Q_H} = 1 - \frac{T_C}{T_H}. Because TCT_C is in the numerator, as TC→0 KT_C \to 0\text{ K}, the term TCTH→0\frac{T_C}{T_H} \to 0, which gives lim⁡TC→0 Kη=1\lim_{T_C \to 0\text{ K}} \eta = 1 (100%100\%).

  2. Step 2

    η=1−8004.20  ⟹  η=1−190.48=−189.48\eta = 1 - \frac{800}{4.20} \implies \eta = 1 - 190.48 = -189.48

    Correct

    η=1−4.20 K800 K=1−0.00525=0.99475≈99.5%\eta = 1 - \frac{4.20\text{ K}}{800\text{ K}} = 1 - 0.00525 = 0.99475 \approx 99.5\%

    Your arithmetic was carried out accurately, but this step carries over the inverted ratio from part (a). Substituting into η=1−TCTH\eta = 1 - \frac{T_C}{T_H} yields η=1−4.20800≈99.5%\eta = 1 - \frac{4.20}{800} \approx 99.5\%.

  3. Step 3

    QC=QH×THTC  ⟹  QC=5.00×103×(8004.20)=9.52×105 JQ_C = Q_H \times \frac{T_H}{T_C} \implies Q_C = 5.00 \times 10^3 \times \left(\frac{800}{4.20}\right) = 9.52 \times 10^5\text{ J}

    Correct

    QC=QH×TCTH=(5.00×103 J)×(4.20 K800 K)=26.25 J≈26.3 JQ_C = Q_H \times \frac{T_C}{T_H} = (5.00 \times 10^3\text{ J}) \times \left(\frac{4.20\text{ K}}{800\text{ K}}\right) = 26.25\text{ J} \approx 26.3\text{ J}

    For a reversible heat engine, the heat ratio mirrors the temperature ratio directly: QCQH=TCTH\frac{Q_C}{Q_H} = \frac{T_C}{T_H}. Inverting this ratio caused the calculated rejected heat to be far greater than the heat absorbed (QC>QHQ_C > Q_H), which violates the conservation of energy.

WHAT YOU DID WELL
Compliments from Your Teacher

You recognized that absolute temperatures in Kelvin are required for thermodynamic efficiency calculations.

You performed the algebraic substitutions and basic arithmetic computations with consistent precision.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula inversion: inverted reservoir temperature ratio

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You reversed the hot and cold reservoirs in the Carnot relationship, setting the ratio as THTC\frac{T_H}{T_C} rather than TCTH\frac{T_C}{T_H}. Remember that a heat engine converts part of QHQ_H into work WW, meaning the rejected heat must be smaller than the absorbed heat (QC<QHQ_C < Q_H), so the ratio QCQH=TCTH\frac{Q_C}{Q_H} = \frac{T_C}{T_H} must always be less than 1.

REASONING PATH
Your ACEpath teacher’s suggested approach
Sanity Check on Efficiency
  • A heat engine must satisfy 0≤η≤10 \le \eta \le 1 (0%0\% to 100%100\%).

  • Whenever your calculated efficiency η\eta is negative or greater than 1, check immediately whether you accidentally inverted TCTH\frac{T_C}{T_H}.

Heat vs. Temperature Correspondence
  • For a reversible engine, QCTC=QHTH\frac{Q_C}{T_C} = \frac{Q_H}{T_H}, so QC=QHTCTHQ_C = Q_H \frac{T_C}{T_H}.

  • Associate cold with cold in the numerator: Qcold=Qhot⋅TcoldThotQ_{\text{cold}} = Q_{\text{hot}} \cdot \frac{T_{\text{cold}}}{T_{\text{hot}}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the definition of Carnot efficiency: η=1−TCTH\eta = 1 - \frac{T_C}{T_H}.

  2. Evaluate the limit as the cold reservoir temperature approaches absolute zero: lim⁡TC→0 K(1−TCTH)=1−0=1=100%\lim_{T_C \to 0\text{ K}} \left(1 - \frac{T_C}{T_H}\right) = 1 - 0 = 1 = 100\%.

  3. Calculate the efficiency at TC=4.20 KT_C = 4.20\text{ K} and TH=800 KT_H = 800\text{ K}: η=1−4.20800=1−0.00525=0.99475≈99.5%\eta = 1 - \frac{4.20}{800} = 1 - 0.00525 = 0.99475 \approx 99.5\%.

  4. Compute the rejected heat using energy balance or temperature proportionality: QC=QH(TCTH)=5.00×103 J×(4.20800)=26.25 J≈26.3 JQ_C = Q_H \left(\frac{T_C}{T_H}\right) = 5.00 \times 10^3\text{ J} \times \left(\frac{4.20}{800}\right) = 26.25\text{ J} \approx 26.3\text{ J}.

Final answer

lim⁡TC→0 Kη=100%\lim_{T_C \to 0\text{ K}} \eta = 100\%; at TC=4.20 KT_C = 4.20\text{ K}, η=99.5%\eta = 99.5\% and QC=26.3 JQ_C = 26.3\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the derivation of Carnot efficiency from the work definition W=QH−QCW = Q_H - Q_C to anchor why TCT_C must be in the numerator.

  • Always perform a physical bounds check on efficiency (%\%) before proceeding to subsequent parts of a thermodynamics problem.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to subtract the temperature ratio from 1, confusing efficiency η with the rejected heat fraction T_C / T_H.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    η=TCTH  ⟹  lim⁡TC→0 KTC800=0\eta = \frac{T_C}{T_H} \implies \lim_{T_C \to 0\text{ K}} \frac{T_C}{800} = 0

    Correct

    η=1−TCTH  ⟹  lim⁡TC→0 K(1−TC800 K)=1=100%\eta = 1 - \frac{T_C}{T_H} \implies \lim_{T_C \to 0\text{ K}} \left(1 - \frac{T_C}{800\text{ K}}\right) = 1 = 100\%

    Thermal efficiency is the ratio of net work produced to heat absorbed, η=WQH=1−QCQH=1−TCTH\eta = \frac{W}{Q_H} = 1 - \frac{Q_C}{Q_H} = 1 - \frac{T_C}{T_H}. The ratio TCTH\frac{T_C}{T_H} represents the fraction of input heat dumped to the cold reservoir, not the efficiency.

  2. Step 2

    η=4.20800=0.00525\eta = \frac{4.20}{800} = 0.00525

    Correct

    η=1−4.20 K800 K=1−0.00525=0.99475≈99.5%\eta = 1 - \frac{4.20\text{ K}}{800\text{ K}} = 1 - 0.00525 = 0.99475 \approx 99.5\%

    You substituted the reservoir temperatures correctly into your formula from Step 1, but because the formula omitted 1−1 -, you found the waste heat fraction (0.525%0.525\%) rather than the thermal efficiency (99.5%99.5\%).

  3. Step 3

    QC=QH×TCTH  ⟹  QC=5.00×103×4.20800=26.25 JQ_C = Q_H \times \frac{T_C}{T_H} \implies Q_C = 5.00 \times 10^3 \times \frac{4.20}{800} = 26.25\text{ J}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related the heat transfer ratio to the absolute temperature ratio for a reversible engine.

You accurately computed the numerical value of the waste heat as QC=26.25 JQ_C = 26.25\text{ J}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Confusion

You wrote η=TCTH\eta = \frac{T_C}{T_H} instead of subtracting this fraction from 11.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the fraction of heat rejected to the cold reservoir (QCQH=TCTH\frac{Q_C}{Q_H} = \frac{T_C}{T_H}) with the fraction of heat converted to useful work (η=WQH=1−TCTH\eta = \frac{W}{Q_H} = 1 - \frac{T_C}{T_H}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Carnot Efficiency Definition
  • η=WQH=QH−QCQH=1−TCTH\eta = \frac{W}{Q_H} = \frac{Q_H - Q_C}{Q_H} = 1 - \frac{T_C}{T_H}

  • Check that as the cold reservoir temperature TC→0 KT_C \to 0\text{ K}, efficiency approaches 11 (100%100\%), because less heat is lost to the environment.

Waste Fraction vs. Efficiency
  • Waste fraction (QCQH)+Efficiency (η)=1\text{Waste fraction } \left(\frac{Q_C}{Q_H}\right) + \text{Efficiency } (\eta) = 1

  • Always verify whether a question asks for the energy utilized as work or the energy discarded as exhaust.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Express the Carnot efficiency as η=1−TCTH\eta = 1 - \frac{T_C}{T_H}.

  2. Evaluate the asymptotic limit: lim⁡TC→0 Kη=1−0=1=100%\lim_{T_C \to 0\text{ K}} \eta = 1 - 0 = 1 = 100\%.

  3. Substitute TC=4.20 KT_C = 4.20\text{ K} and TH=800 KT_H = 800\text{ K}: η=1−4.20800=1−0.00525=0.99475≈99.5%\eta = 1 - \frac{4.20}{800} = 1 - 0.00525 = 0.99475 \approx 99.5\%.

Final answer

lim⁡TC→0 Kη=100%\lim_{T_C \to 0\text{ K}} \eta = 100\%; at TC=4.20 KT_C = 4.20\text{ K}, η≈99.5%\eta \approx 99.5\% and QC≈26.3 JQ_C \approx 26.3\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Revisit the derivation of Carnot efficiency from energy conservation: W=QH−QCW = Q_H - Q_C.

  • Practice writing η=1−TCTH\eta = 1 - \frac{T_C}{T_H} and performing a sanity check: as TCT_C decreases, η\eta must increase.

OverviewACEpath Teacher's Diagnosis

03 The student confuses waste heat rejected with work output, calculating W = η × Q_H instead of Q_C = (1 - η) × Q_H.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    η=1−TCTH  ⟹  As TC→0 K, η→1−0=1\eta = 1 - \frac{T_C}{T_H} \implies \text{As } T_C \to 0\text{ K},\ \eta \to 1 - 0 = 1

  2. Step 2

    η=1−4.20800  ⟹  η=1−0.00525=0.99475\eta = 1 - \frac{4.20}{800} \implies \eta = 1 - 0.00525 = 0.99475

  3. Step 3

    QC=η×QH  ⟹  QC=0.99475×5.00×103=4973.75 JQ_C = \eta \times Q_H \implies Q_C = 0.99475 \times 5.00 \times 10^3 = 4973.75\text{ J}

    Correct

    QC=(1−η)QH=(1−0.99475)×5.00×103 J=26.25 J≈26.3 JQ_C = (1 - \eta)Q_H = (1 - 0.99475) \times 5.00 \times 10^3\text{ J} = 26.25\text{ J} \approx 26.3\text{ J}

    You calculated η×QH\eta \times Q_H, which represents the useful work output WW, rather than the rejected waste heat QCQ_C. By energy conservation, the heat rejected to the cold reservoir is QC=QH−W=(1−η)QHQ_C = Q_H - W = (1 - \eta)Q_H.

WHAT YOU DID WELL
Compliments from Your Teacher

You recalled and stated the correct formula for Carnot efficiency.

You evaluated the asymptotic limit as TC→0 KT_C \to 0\text{ K} without algebraic errors.

You performed accurate arithmetic to find η=0.99475\eta = 0.99475 at TC=4.20 KT_C = 4.20\text{ K}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Misapplication

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the work output W=ηQHW = \eta Q_H with the rejected waste heat QC=(1−η)QHQ_C = (1 - \eta)Q_H. Because thermal efficiency is defined as η=WQH\eta = \frac{W}{Q_H}, multiplying η\eta by QHQ_H yields work, whereas the remaining energy rejected to the environment is QC=QH−WQ_C = Q_H - W.

REASONING PATH
Your ACEpath teacher’s suggested approach
Energy Partition in Heat Engines
  • QH=W+QCQ_H = W + Q_C, where efficiency is defined by η=WQH\eta = \frac{W}{Q_H}.

  • Always write down the work-heat relation W=ηQHW = \eta Q_H and waste heat relation QC=(1−η)QH=QH−WQ_C = (1 - \eta)Q_H = Q_H - W before computing numerical values.

Carnot Heat Ratio
  • For a reversible engine, QCQH=TCTH\frac{Q_C}{Q_H} = \frac{T_C}{T_H}.

  • Check your waste heat directly using QC=QH⋅TCTHQ_C = Q_H \cdot \frac{T_C}{T_H} to ensure the result is proportional to the cold reservoir temperature.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Relate the rejected heat QCQ_C to the total heat absorbed QHQ_H and efficiency η\eta: QC=(1−η)QHQ_C = (1 - \eta) Q_H.

  2. Substitute η=0.99475\eta = 0.99475 and QH=5.00×103 JQ_H = 5.00 \times 10^3\text{ J}: QC=(1−0.99475)×5000 J=0.00525×5000 JQ_C = (1 - 0.99475) \times 5000\text{ J} = 0.00525 \times 5000\text{ J}.

  3. Calculate the product: QC=26.25 J≈26.3 JQ_C = 26.25\text{ J} \approx 26.3\text{ J}.

Final answer

lim⁡TC→0 Kη=100%\lim_{T_C \to 0\text{ K}} \eta = 100\%; at TC=4.20 KT_C = 4.20\text{ K}, η=99.5%\eta = 99.5\% and QC=26.3 JQ_C = 26.3\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the energy balance diagram of a heat engine to keep work output WW and rejected heat QCQ_C clearly separated.

  • Practice recalculating waste heat using both QC=QH−WQ_C = Q_H - W and QC=QH(TCTH)Q_C = Q_H \left(\frac{T_C}{T_H}\right) to verify consistency.

Lock it in

Similar question

01

A Carnot engine absorbs 1.20×103 J1.20 \times 10^3\text{ J} of heat from a source at TH=600 KT_H = 600\text{ K} and discharges heat to a sink at TC=150 KT_C = 150\text{ K}. Calculate the engine's theoretical efficiency η\eta and the rejected waste heat QCQ_C.

Answer

η=75.0%\eta = 75.0\%, QC=300 JQ_C = 300\text{ J}. Key steps: η=1−TCTH=1−150600=0.75\eta = 1 - \frac{T_C}{T_H} = 1 - \frac{150}{600} = 0.75; QC=QH(TCTH)=1200×(150600)=300 JQ_C = Q_H \left(\frac{T_C}{T_H}\right) = 1200 \times \left(\frac{150}{600}\right) = 300\text{ J}.

02

A geothermal power plant operates as an ideal Carnot cycle between a deep thermal source at 227∘C227^\circ\text{C} and an ambient river reservoir at 27∘C27^\circ\text{C}. If the plant produces 1.00×107 J1.00\times 10^7\text{ J} of mechanical work per cycle, find its thermal efficiency and the heat absorbed from the geothermal source QHQ_H.

Answer

η=40.0%\eta = 40.0\%, QH=2.50×107 JQ_H = 2.50 \times 10^7\text{ J}. Key steps: Convert to Kelvin: TH=500 KT_H = 500\text{ K}, TC=300 KT_C = 300\text{ K}. Then η=1−300500=0.400=40.0%\eta = 1 - \frac{300}{500} = 0.400 = 40.0\%. Since W=ηQHW = \eta Q_H, we have QH=Wη=1.00×107 J0.400=2.50×107 JQ_H = \frac{W}{\eta} = \frac{1.00 \times 10^7\text{ J}}{0.400} = 2.50 \times 10^7\text{ J}.

03

An engineer designs an engine operating between TH=900 KT_H = 900\text{ K} and an exhaust environment at TC=300 KT_C = 300\text{ K}. The design specifies that for every 1800 J1800\text{ J} of heat input, the engine rejects 500 J500\text{ J} to the environment. Determine whether this engine is reversible, irreversible, or physically impossible.

Answer

Physically impossible. Key steps: The theoretical Carnot maximum efficiency is ηmax=1−300900=23≈66.7%\eta_{\text{max}} = 1 - \frac{300}{900} = \frac{2}{3} \approx 66.7\%. The claimed efficiency is ηclaimed=1−QCQH=1−5001800=1318≈72.2%\eta_{\text{claimed}} = 1 - \frac{Q_C}{Q_H} = 1 - \frac{500}{1800} = \frac{13}{18} \approx 72.2\%. Because ηclaimed>ηmax\eta_{\text{claimed}} > \eta_{\text{max}}, the engine violates the Second Law of Thermodynamics.

Loading workspace…