Resources

A small block of mass m=0.450 kgm = 0.450\text{ kg} is released from rest at the top of a smooth, frictionless curved track of vertical height h1=3.20 mh_1 = 3.20\text{ m}. At the bottom of the track, the block transitions smoothly onto a horizontal platform of height h2=1.80 mh_2 = 1.80\text{ m} above flat ground, travels across the edge, and is launched into projectile motion horizontally. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2 and ignoring air resistance: (a) determine the horizontal speed vxv_x of the block as it leaves the edge, (b) calculate the time of flight TT before striking the ground, and (c) find the total horizontal landing distance RR measured from the base of the platform.

Answer and steps

Final answer

(a) vx=7.92 m/sv_x = 7.92\text{ m/s}; (b) T=0.606 sT = 0.606\text{ s}; (c) R=4.80 mR = 4.80\text{ m}

Steps

Part (a): Determine the horizontal launch speed vxv_x

Because the curved track is frictionless and there is no air resistance, mechanical energy is conserved as the block slides down the track.

  1. Apply conservation of energy: Choosing the horizontal platform as the reference level for potential energy (y=0y = 0): Einitial=EbottomE_{\text{initial}} = E_{\text{bottom}} mgh1=12mvx2m g h_1 = \frac{1}{2} m v_x^2
  2. Solve for vxv_x: The mass mm cancels out: vx=2gh1v_x = \sqrt{2 g h_1}
  3. Substitute the given values: vx=2⋅9.80 m/s2⋅3.20 m=62.72 m/s≈7.92 m/sv_x = \sqrt{2 \cdot 9.80\text{ m/s}^2 \cdot 3.20\text{ m}} = \sqrt{62.72}\text{ m/s} \approx 7.92\text{ m/s}

Pitfall to avoid: The mass of the block (m=0.450 kgm = 0.450\text{ kg}) is extra information not needed for finding the velocity under gravitational acceleration alone.


Part (b): Calculate the time of flight TT

Once the block leaves the platform, it undergoes horizontal projectile motion. The vertical and horizontal motions are completely independent.

  1. Analyze vertical motion: The block leaves the edge horizontally, so its initial vertical velocity is zero (vy0=0v_{y0} = 0). Taking the downward direction as positive: y(t)=vy0t+12gt2=12gt2y(t) = v_{y0} t + \frac{1}{2} g t^2 = \frac{1}{2} g t^2
  2. Set the vertical displacement equal to the platform height h2h_2: h2=12gT2h_2 = \frac{1}{2} g T^2
  3. Solve for the flight time TT: T=2h2gT = \sqrt{\frac{2 h_2}{g}} T=2⋅1.80 m9.80 m/s2=3.609.80 s≈0.606 sT = \sqrt{\frac{2 \cdot 1.80\text{ m}}{9.80\text{ m/s}^2}} = \sqrt{\frac{3.60}{9.80}}\text{ s} \approx 0.606\text{ s}

Part (c): Find the horizontal landing distance RR

In the horizontal direction, there is no acceleration (ax=0a_x = 0), so the block travels at constant speed vxv_x throughout its time of flight.

  1. Apply the horizontal kinematics equation: R=vx⋅TR = v_x \cdot T
  2. Calculate RR using exact intermediate values to prevent rounding error: R=62.72⋅3.609.80=62.72⋅3.609.80=6.40⋅3.60=23.04=4.80 mR = \sqrt{62.72} \cdot \sqrt{\frac{3.60}{9.80}} = \sqrt{\frac{62.72 \cdot 3.60}{9.80}} = \sqrt{6.40 \cdot 3.60} = \sqrt{23.04} = 4.80\text{ m}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misuses the vertical heights by using the platform height h₂ instead of the track height h₁ in the conservation of energy equation, leading to an incorrect launch speed and range.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m⋅g⋅h2=12⋅m⋅vx2  ⟹  vx=2⋅9.80⋅1.80  ⟹  vx≈5.94 m/sm \cdot g \cdot h_2 = \frac{1}{2} \cdot m \cdot v_x^2 \implies v_x = \sqrt{2 \cdot 9.80 \cdot 1.80} \implies v_x \approx 5.94\text{ m/s}

    Correct

    mgh1=12mvx2  ⟹  vx=2gh1=2⋅9.80⋅3.20≈7.92 m/sm g h_1 = \frac{1}{2} m v_x^2 \implies v_x = \sqrt{2 g h_1} = \sqrt{2 \cdot 9.80 \cdot 3.20} \approx 7.92\text{ m/s}

    You correctly set up the conservation of energy equation between gravitational potential energy and kinetic energy, but you used the platform height h2=1.80 mh_2 = 1.80\text{ m} instead of the vertical track height h1=3.20 mh_1 = 3.20\text{ m}. The block loses potential energy corresponding to the vertical drop of the ramp itself.

  2. Step 2

    h2=12⋅g⋅T2  ⟹  T=2⋅1.809.80  ⟹  T≈0.606 sh_2 = \frac{1}{2} \cdot g \cdot T^2 \implies T = \sqrt{\frac{2 \cdot 1.80}{9.80}} \implies T \approx 0.606\text{ s}

  3. Step 3

    R=vx⋅T  ⟹  R=5.94⋅0.606  ⟹  R≈3.60 mR = v_x \cdot T \implies R = 5.94 \cdot 0.606 \implies R \approx 3.60\text{ m}

    Correct

    R=vx⋅T=7.92⋅0.606≈4.80 mR = v_x \cdot T = 7.92 \cdot 0.606 \approx 4.80\text{ m}

    Your formula for horizontal range is completely correct, but the calculated numerical value is affected by the incorrect value of vxv_x from Part (a).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied mechanical energy conservation to relate potential energy to kinetic energy.

You set up the vertical kinematics equation accurately using the platform height to solve for time of flight.

You used the constant horizontal velocity relation R=vxTR = v_x T correctly to determine range.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Height Variable Confusion

No, this was a conceptual confusion between the two distinct heights given in the problem setup rather than an arithmetic slip.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the two separate stages of motion and assigned the wrong vertical height to the ramp phase. The height involved in conservation of energy is the vertical descent of the ramp (h1h_1), whereas the height governing the projectile fall is the launch elevation above the ground (h2h_2).

REASONING PATH
Your ACEpath teacher’s suggested approach
Height Role Separation
  • In multi-stage motion, match each vertical distance to the specific interval where that displacement occurs.

  • Label the ramp height Δy1=h1\Delta y_1 = h_1 for energy conversion and the cliff height Δy2=h2\Delta y_2 = h_2 for projectile drop before calculating.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute the vertical track height h1=3.20 mh_1 = 3.20\text{ m} into the energy conservation equation: vx=2gh1=2⋅9.80⋅3.20=62.72≈7.92 m/sv_x = \sqrt{2 g h_1} = \sqrt{2 \cdot 9.80 \cdot 3.20} = \sqrt{62.72} \approx 7.92\text{ m/s}.

  2. Use the correct horizontal speed with your verified flight time T≈0.606 sT \approx 0.606\text{ s}: R=vx⋅T=7.92⋅0.606≈4.80 mR = v_x \cdot T = 7.92 \cdot 0.606 \approx 4.80\text{ m}.

Final answer

(a) vx=7.92 m/sv_x = 7.92\text{ m/s}; (b) T=0.606 sT = 0.606\text{ s}; (c) R=4.80 mR = 4.80\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always sketch a diagram and distinctly annotate each height: one for the energy-conversion stage and one for the projectile-motion stage.

  • Keep unrounded radical expressions (like 62.72\sqrt{62.72}) until the final step to minimize intermediate rounding discrepancies.

OverviewACEpath Teacher's Diagnosis

02 The student forgets the factor of 1/2 in the kinetic energy formula, resulting in an underestimated horizontal launch speed and range.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m⋅g⋅h1=m⋅vx2  ⟹  vx=g⋅h1=9.80⋅3.20=31.36=5.60 m/sm \cdot g \cdot h_1 = m \cdot v_x^2 \implies v_x = \sqrt{g \cdot h_1} = \sqrt{9.80 \cdot 3.20} = \sqrt{31.36} = 5.60\text{ m/s}

    Correct

    mgh1=12mvx2  ⟹  vx=2gh1=2(9.80)(3.20)≈7.92 m/sm g h_1 = \frac{1}{2} m v_x^2 \implies v_x = \sqrt{2 g h_1} = \sqrt{2(9.80)(3.20)} \approx 7.92\text{ m/s}

    You set gravitational potential energy equal to mvx2m v_x^2 instead of 12mvx2\frac{1}{2} m v_x^2. Kinetic energy is defined as K=12mv2K = \frac{1}{2} m v^2, so the factor of 22 is needed under the square root.

  2. Step 2

    h2=12⋅g⋅T2  ⟹  T=2⋅1.809.80  ⟹  T≈0.606 sh_2 = \frac{1}{2} \cdot g \cdot T^2 \implies T = \sqrt{\frac{2 \cdot 1.80}{9.80}} \implies T \approx 0.606\text{ s}

  3. Step 3

    R=vx⋅T  ⟹  R=5.60⋅0.606  ⟹  R≈3.39 mR = v_x \cdot T \implies R = 5.60 \cdot 0.606 \implies R \approx 3.39\text{ m}

    Correct

    R=vx⋅T=7.92⋅0.606≈4.80 mR = v_x \cdot T = 7.92 \cdot 0.606 \approx 4.80\text{ m}

    Your formula R=vx⋅TR = v_x \cdot T is completely correct, but your numerical answer was affected by the underestimated launch speed from part (a).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that mechanical energy is conserved along the frictionless ramp.

You treated the vertical and horizontal components of projectile motion as completely independent.

You used the correct horizontal kinematics relation R=vxTR = v_x T to find the range.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing $\frac{1}{2}$ in kinetic energy

You wrote K=mv2K = m v^2 rather than K=12mv2K = \frac{1}{2} m v^2 when balancing mechanical energy.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Incomplete recall of the definition of translational kinetic energy, treating it as mv2m v^2 rather than 12mv2\frac{1}{2} m v^2.

REASONING PATH
Your ACEpath teacher’s suggested approach
Kinetic Energy Formula
  • Translational kinetic energy is always K=12mv2K = \frac{1}{2} m v^2.

  • Whenever an object accelerates from rest under gravity through height hh, check that conservation of energy gives v=2ghv = \sqrt{2gh}, not gh\sqrt{gh}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set mgh1=12mvx2m g h_1 = \frac{1}{2} m v_x^2, so vx=2gh1=2(9.80)(3.20)=62.72≈7.92 m/sv_x = \sqrt{2 g h_1} = \sqrt{2(9.80)(3.20)} = \sqrt{62.72} \approx 7.92\text{ m/s}.

  2. Keep the correct flight time from part (b): T=2(1.80)9.80≈0.606 sT = \sqrt{\frac{2(1.80)}{9.80}} \approx 0.606\text{ s}.

  3. Substitute the corrected speed into the range equation: R=vxT=7.92⋅0.606≈4.80 mR = v_x T = 7.92 \cdot 0.606 \approx 4.80\text{ m}.

Final answer

(a) vx=7.92 m/sv_x = 7.92\text{ m/s}; (b) T=0.606 sT = 0.606\text{ s}; (c) R=4.80 mR = 4.80\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check your energy balance equations by verifying units or dimensions before taking square roots.

  • Memorize the standard free-fall/ramp speed relationship v=2ghv = \sqrt{2gh} as a quick sanity check.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to take the square root when solving for time of flight in the vertical kinematics formula, using T = 2·h₂/g instead of T = √(2·h₂/g).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m⋅g⋅h1=12⋅m⋅vx2  ⟹  vx=2⋅9.80⋅3.20  ⟹  vx=62.72≈7.92 m/sm \cdot g \cdot h_1 = \frac{1}{2} \cdot m \cdot v_x^2 \implies v_x = \sqrt{2 \cdot 9.80 \cdot 3.20} \implies v_x = \sqrt{62.72} \approx 7.92\text{ m/s}

  2. Step 2

    h2=12⋅g⋅T  ⟹  T=2⋅h2g  ⟹  T=2⋅1.809.80≈0.367 sh_2 = \frac{1}{2} \cdot g \cdot T \implies T = \frac{2 \cdot h_2}{g} \implies T = \frac{2 \cdot 1.80}{9.80} \approx 0.367\text{ s}

    Correct

    h2=12gT2  ⟹  T=2h2g=2⋅1.809.80≈0.606 sh_2 = \frac{1}{2} g T^2 \implies T = \sqrt{\frac{2 h_2}{g}} = \sqrt{\frac{2 \cdot 1.80}{9.80}} \approx 0.606\text{ s}

    In vertical free-fall kinematics with zero initial vertical velocity, the vertical displacement equation is h2=12gT2h_2 = \frac{1}{2} g T^2. You wrote TT instead of T2T^2, which caused you to solve for TT linearly rather than taking the square root.

  3. Step 3

    R=vx⋅T  ⟹  R=7.92⋅0.367  ⟹  R≈2.91 mR = v_x \cdot T \implies R = 7.92 \cdot 0.367 \implies R \approx 2.91\text{ m}

    Correct

    R=vx⋅T≈7.92 m/s⋅0.606 s≈4.80 mR = v_x \cdot T \approx 7.92\text{ m/s} \cdot 0.606\text{ s} \approx 4.80\text{ m}

    Your setup R=vx⋅TR = v_x \cdot T and arithmetic are correct, but your final answer is affected by substituting the incorrect value of TT from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly set gravitational potential energy equal to kinetic energy to solve for vxv_x.

You recognized that horizontal motion has zero acceleration and used R=vx⋅TR = v_x \cdot T.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Kinematics Formula Omission

You accidentally dropped the exponent 22 from TT in the vertical displacement formula h2=12gT2h_2 = \frac{1}{2}gT^2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the linear velocity formula (v=gtv = g t) with the quadratic displacement formula (y=12gt2y = \frac{1}{2} g t^2) leads to omitting the square on time and forgetting to take the square root when solving for flight duration.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional and Formula Check
  • Displacement under constant acceleration requires t2t^2, because [gt2]=(m/s2)(s2)=m[g t^2] = (\text{m/s}^2)(\text{s}^2) = \text{m}, whereas [gt]=m/s[g t] = \text{m/s}.

  • Always verify that your vertical kinematics equation has units of meters: write Δy=vy0t+12gt2\Delta y = v_{y0}t + \frac{1}{2}gt^2 and isolate t=2Δygt = \sqrt{\frac{2\Delta y}{g}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the vertical displacement equation: h2=12gT2h_2 = \frac{1}{2} g T^2

  2. Isolate TT: T=2h2g=2⋅1.809.80=0.3673≈0.606 sT = \sqrt{\frac{2 h_2}{g}} = \sqrt{\frac{2 \cdot 1.80}{9.80}} = \sqrt{0.3673} \approx 0.606\text{ s}

  3. Compute the horizontal range: R=vx⋅T=7.92 m/s⋅0.606 s≈4.80 mR = v_x \cdot T = 7.92\text{ m/s} \cdot 0.606\text{ s} \approx 4.80\text{ m}

Final answer

(a) vx≈7.92 m/sv_x \approx 7.92\text{ m/s}; (b) T≈0.606 sT \approx 0.606\text{ s}; (c) R≈4.80 mR \approx 4.80\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that time is squared whenever you relate distance to constant acceleration: Δy=12at2\Delta y = \frac{1}{2} a t^2.

  • Perform a quick unit check on your isolated expression: mm/s2=s2=s\sqrt{\frac{\text{m}}{\text{m/s}^2}} = \sqrt{\text{s}^2} = \text{s}.

Lock it in

Similar question

01

A toy car slides from rest down a frictionless curved ramp of height h1=1.25 mh_1 = 1.25\text{ m} onto a horizontal table of height h2=0.80 mh_2 = 0.80\text{ m} above the floor, then flies off horizontally. Using g=9.8 m/s2g = 9.8\text{ m/s}^2, calculate its horizontal launch speed vxv_x and its time of flight TT.

Answer

vx=4.95 m/sv_x = 4.95\text{ m/s}, T=0.404 sT = 0.404\text{ s}. Key steps: vx=2gh1=2⋅9.8⋅1.25=24.5≈4.95 m/sv_x = \sqrt{2 g h_1} = \sqrt{2 \cdot 9.8 \cdot 1.25} = \sqrt{24.5} \approx 4.95\text{ m/s}; T=2h2g=2⋅0.809.8≈0.404 sT = \sqrt{\frac{2 h_2}{g}} = \sqrt{\frac{2 \cdot 0.80}{9.8}} \approx 0.404\text{ s}.

02

A skier starts from rest and slides down a frictionless incline of height h1=20.0 mh_1 = 20.0\text{ m}. At the bottom, the slope turns horizontal at the edge of a snow cliff of height h2=45.0 mh_2 = 45.0\text{ m}. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, find the total horizontal distance RR from the base of the cliff to the landing point.

Answer

R=59.4 mR = 59.4\text{ m}. Key steps: Launch speed from slope is vx=2gh1=2(9.80)(20.0)=19.8 m/sv_x = \sqrt{2 g h_1} = \sqrt{2(9.80)(20.0)} = 19.8\text{ m/s}. Flight time from cliff drop is T=2h2g=2(45.0)9.80=3.03 sT = \sqrt{\frac{2 h_2}{g}} = \sqrt{\frac{2(45.0)}{9.80}} = 3.03\text{ s}. Horizontal distance is R=vxT=(19.8)(3.03)≈59.4 mR = v_x T = (19.8)(3.03) \approx 59.4\text{ m}.

03

A marble rolls off a track system where ramp vertical height is h1h_1 and table height is h2h_2. If h1h_1 is quadrupled while h2h_2 is kept constant, by what factor does the horizontal landing range RR change?

Answer

The range RR doubles (increases by a factor of 22). Key steps: vx=2gh1v_x = \sqrt{2 g h_1}, so quadrupling h1h_1 doubles vxv_x. The flight time T=2h2gT = \sqrt{\frac{2 h_2}{g}} depends only on h2h_2 and remains unchanged. Since R=vxTR = v_x T, doubling vxv_x doubles RR.

Loading workspace…