Resources
In an undergraduate physics laboratory experiment, a student measures the charging curve of an unknown electrolytic capacitor using a digital storage oscilloscope (DSO) with an input impedance of placed in parallel with the capacitor. The charging circuit consists of an ideal DC voltage calibrator in series with a decade resistance box set to and the capacitor . Due to the finite input impedance of the oscilloscope , the circuit forms a loaded divider. (a) Determine the asymptotic steady-state voltage recorded by the oscilloscope as . (b) If the oscilloscope records that the capacitor voltage reaches at exactly , calculate the true capacitance .
Answer and steps
Final answer
(a) ; (b)
Steps
Part (a): Finding the Asymptotic Steady-State Voltage
- Behavior at : As the capacitor charges toward its steady state, the charging current entering the capacitor plates approaches zero: Therefore, at , the capacitor behaves as an open circuit.
- Voltage Divider Formed by the Resistors: The remaining current supplied by the ideal DC source flows entirely through the series decade resistance and the parallel input resistance of the oscilloscope . Applying the voltage divider formula:
-
Numerical Substitution: Convert all resistances to the same unit ( or ):
Part (b): Determining the True Capacitance
-
Thévenin Equivalent Circuit Seen by the Capacitor: To model the charging dynamics accurately, simplify the source and resistive network connected across the capacitor using Thévenin's theorem:
- Thévenin open-circuit voltage:
- Thévenin equivalent resistance (found by deactivating the ideal voltage source to a short circuit):
- Charging Equation: Assuming the capacitor is initially uncharged (), the voltage across as a function of time is: where the effective circuit time constant is:
-
Solving for the Time Constant : Rearrange the charging formula to isolate the exponential term:
Substitute , , and :
- Calculating : Using the relationship :
Common Pitfall: Assuming the capacitor charges toward the full source voltage with a time constant . Because the oscilloscope's input impedance draws current, it acts as a parallel load that lowers both the final asymptotic voltage () and the effective charging resistance ().
Typical errors
01 The student ignores the finite input impedance of the oscilloscope during charging, treating the asymptotic voltage as the full EMF and the charging resistance as Rs alone.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You correctly realized that no current enters the capacitor once fully charged. However, the oscilloscope's input resistance remains connected in parallel with the capacitor, forming a resistive voltage divider with across the source.
- Step 2Correct
Your algebraic rearrangement to isolate was completely sound. Because it used your uncorrected asymptotic voltage of instead of , the calculated time constant shifted from to .
- Step 3Correct
You calculated capacitance using only the series resistor . In a loaded charging circuit, the capacitor sees the Thévenin equivalent resistance .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that a fully charged capacitor draws zero steady-state branch current.
You applied the exponential charging model and correctly solved for the time constant from the transient voltage point.
You maintained clear units and consistent decimal precision throughout your algebraic manipulations.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeNone.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou modeled the measurement device as an ideal infinite-impedance voltmeter rather than incorporating its finite input resistance into the circuit's Thévenin equivalent voltage and resistance.
REASONING PATH
Your ACEpath teacher’s suggested approach- Meter Loading Check
Any measuring instrument placed in parallel with a component introduces a parallel branch of resistance .
Redraw the circuit with explicitly in parallel with the capacitor and check if holds by at least a factor of ; if not, include in your calculations.
- Thévenin Equivalent for RC Circuits
A capacitor connected to a resistive source network charges toward with time constant , where is the equivalent resistance with all independent voltage sources shorted.
Replace the source and all resistors connected to the capacitor terminals with and before applying .
CORRECTED PATH
ACEpath Teacher's DemonstrationFind the steady-state open-circuit voltage across the capacitor terminals: .
Determine the effective resistance seen by the capacitor by deactivating the source: .
Use the transient condition to find : .
Compute the true capacitance: .
(a) ; (b)
02 The student correctly accounts for the reduced asymptotic voltage V_∞ from the loaded divider, but forgets to use the parallel Thévenin resistance R_th for the time constant, using Rs instead.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
t \infty$$\text{, capacitor is an open circuit.} V_{} = = = 9.78$\text{ V}$$
- Step 2
V(t) = V_{} 5.00 = 9.78 e^{-3.65/} = 0.489 = = 5.10_
- Step 3
= R_s C_x C_x = = 2.32 10^{-5} = 23.2\text{ }$$\mu$$\text{F}
CorrectYou used alone to find . Because the oscilloscope resistance is connected across the capacitor, the discharging/charging path sees in parallel with when the ideal source is zeroed.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly modeled the steady-state circuit as an open-circuit voltage divider to find .
You set up the exponential transient equation properly and accurately solved for .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou accounted for the meter impedance when finding the open-circuit voltage , but forgot that Thévenin's theorem also requires calculating the equivalent resistance seen from the capacitor's terminals with the independent voltage source turned off.
REASONING PATH
Your ACEpath teacher’s suggested approach- Finding Time Constants in Multi-Resistor Circuits
For any single-capacitor linear circuit, , where is the equivalent resistance seen across the capacitor terminals when independent sources are deactivated (voltage sources shorted, current sources opened).
Whenever a meter or parallel resistor is present, turn off the DC source to a short circuit and find the equivalent resistance connected across the capacitor terminals before calculating or .
CORRECTED PATH
ACEpath Teacher's DemonstrationCompute the Thévenin resistance seen by : .
Solve for capacitance using : .
(a) ; (b)
03 The student adds Rs and Rm in series instead of taking their parallel combination when calculating the equivalent resistance seen by the capacitor.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
As , the capacitor acts as an open circuit.
- Step 2
- Step 3Correct
To find the resistance that charges the capacitor, you must look into the circuit from the capacitor terminals with the independent voltage source deactivated (short-circuited). That puts and in parallel, not in series.
- Step 4Correct
(or with unrounded intermediate values)
Your formula is correct, but because the equivalent resistance was too large by a factor of nearly 50, your resulting capacitance was substantially underestimated.
WHAT YOU DID WELL
Compliments from Your TeacherYou recognized that the capacitor acts as an open circuit as to correctly evaluate .
You used the correct loaded exponential charging equation .
You accurately solved for the numerical time constant from the given voltage and time.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou calculated the equivalent resistance by adding and in series across the loop rather than deactivating the ideal source to find the Thévenin resistance seen directly from the capacitor terminals.
REASONING PATH
Your ACEpath teacher’s suggested approach- Finding Thévenin Resistance for RC Circuits
The time constant of any linear first-order RC circuit is , where is the equivalent resistance seen between the capacitor terminals with all independent DC sources deactivated (voltage sources replaced with short circuits).
Always disconnect the capacitor, replace ideal DC voltage sources with shorts, and compute the equivalent resistance looking back into those two terminals.
CORRECTED PATH
ACEpath Teacher's DemonstrationDeactivate the voltage source to a short circuit to find the Thévenin resistance across the capacitor terminals: .
Use the relationship with unrounded (or your calculated ): .
(a) ; (b)
Lock it in
How does a voltmeter with finite input resistance connected across a charging capacitor affect the steady-state voltage ?
. Because forms a voltage divider with the source resistor , the capacitor never reaches the full EMF .
Similar question
A DC power supply charges a capacitor through a series resistor. A voltmeter with an input impedance of is placed directly across the capacitor. Determine the maximum voltage indicated by the voltmeter as .
Answer
. At steady state, no current flows into the capacitor plates, so and form a voltage divider: .
In the same circuit (, , ), the capacitor has capacitance . Calculate the effective charging time constant of the system.
Answer
. The effective charging resistance is the Thévenin resistance seen by the capacitor: . Thus, .
An uncharged capacitor is charged from an ideal source through a series resistance . An oscilloscope with internal resistance is connected across . If the oscilloscope displays at , calculate the value of .
Answer
. First, find and . From the charging law, . Thus, . Finally, .