Resources

A mass-spring oscillator oscillates vertically according to y(t)=Acos⁡(ωt+ϕ0)y(t) = A\cos(\omega t + \phi_0) with an amplitude of A=0.160 mA = 0.160\text{ m} and an angular frequency of ω=5.00 rad/s\omega = 5.00\text{ rad/s}. At t=0 st = 0\text{ s}, the mass is measured to be at position y(0)=+0.0800 my(0) = +0.0800\text{ m} and is moving downward in the negative yy-direction. Determine the phase constant ϕ0\phi_0 of the oscillation restricted to the primary interval [0,2π) rad[0, 2\pi)\text{ rad}.](streamdown:incomplete-link)

Answer and steps

Final answer

ϕ0=π3 rad≈1.05 rad\phi_0 = \frac{\pi}{3}\text{ rad} \approx 1.05\text{ rad}

Steps

01

Use the Initial Position Condition

The position of the oscillator as a function of time is given by: y(t)=Acos⁡(ωt+ϕ0)y(t) = A\cos(\omega t + \phi_0)

Substitute t=0 st = 0\text{ s}, A=0.160 mA = 0.160\text{ m}, and y(0)=+0.0800 my(0) = +0.0800\text{ m}: 0.0800=0.160cos⁡(ϕ0)0.0800 = 0.160\cos(\phi_0)

Solve for cos⁡(ϕ0)\cos(\phi_0): cos⁡(ϕ0)=0.08000.160=12\cos(\phi_0) = \frac{0.0800}{0.160} = \frac{1}{2}

Within the primary interval [0,2π) rad[0, 2\pi)\text{ rad}, the equation cos⁡(ϕ0)=12\cos(\phi_0) = \frac{1}{2} yields two candidate angles: ϕ0=π3 radorϕ0=2π−π3=5π3 rad\phi_0 = \frac{\pi}{3}\text{ rad} \quad \text{or} \quad \phi_0 = 2\pi - \frac{\pi}{3} = \frac{5\pi}{3}\text{ rad}

---](streamdown:incomplete-link)

02

Use the Velocity Condition to Resolve Ambiguity

To determine which angle represents the actual physical state, find the velocity function by differentiating position with respect to time: v(t)=dydt=−Aωsin⁡(ωt+ϕ0)v(t) = \frac{dy}{dt} = -A\omega\sin(\omega t + \phi_0)

Evaluating the velocity at t=0 st = 0\text{ s}: v(0)=−Aωsin⁡(ϕ0)v(0) = -A\omega\sin(\phi_0)

The oscillator is given to be moving downward in the negative yy-direction at t=0 st = 0\text{ s}, which means: v(0)<0v(0) < 0

Because the amplitude AA and angular frequency ω\omega are strictly positive (A=0.160 m>0A = 0.160\text{ m} > 0 and ω=5.00 rad/s>0\omega = 5.00\text{ rad/s} > 0), the condition −Aωsin⁡(ϕ0)<0-A\omega\sin(\phi_0) < 0 requires: sin⁡(ϕ0)>0\sin(\phi_0) > 0


03

Select the Correct Phase Constant

Test the two candidate angles:

  • For ϕ0=π3 rad\phi_0 = \frac{\pi}{3}\text{ rad}: sin⁡(π3)=32>0  ⟹  v(0)=−(0.160)(5.00)(32)<0(moving downward)\sin\left(\frac{\pi}{3}\right) = \frac{\sqrt{3}}{2} > 0 \implies v(0) = -(0.160)(5.00)\left(\frac{\sqrt{3}}{2}\right) < 0 \quad (\text{moving downward})
  • For ϕ0=5π3 rad\phi_0 = \frac{5\pi}{3}\text{ rad}: sin⁡(5π3)=−32<0  ⟹  v(0)>0(moving upward)\sin\left(\frac{5\pi}{3}\right) = -\frac{\sqrt{3}}{2} < 0 \implies v(0) > 0 \quad (\text{moving upward})

Therefore, the correct phase constant is: ϕ0=π3 rad≈1.05 rad\phi_0 = \frac{\pi}{3}\text{ rad} \approx 1.05\text{ rad}

(Common Pitfall: Solving only cos⁡(ϕ0)=12\cos(\phi_0) = \frac{1}{2} by taking the principal inverse cosine arccos⁡(0.5)=π3\arccos(0.5) = \frac{\pi}{3} happens to give the correct value here, but neglecting the sign of velocity can lead to an incorrect phase when the object is moving upward, where ϕ0=5π3 rad\phi_0 = \frac{5\pi}{3}\text{ rad} would be required instead.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets that the time derivative of cosine introduces a negative sign in the velocity, concluding that downward motion requires sin(ϕ₀) < 0 and selecting ϕ₀ = 5π/3 rad.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    y(0)=Acos⁡(ϕ0)  ⟹  0.0800=0.160cos⁡(ϕ0)  ⟹  cos⁡(ϕ0)=0.500  ⟹  ϕ0=π3 or 5π3y(0) = A\cos(\phi_0) \implies 0.0800 = 0.160\cos(\phi_0) \implies \cos(\phi_0) = 0.500 \implies \phi_0 = \frac{\pi}{3} \text{ or } \frac{5\pi}{3}

  2. Step 2

    v(t)=Aωsin⁡(ωt+ϕ0)  ⟹  v(0)<0 means sin⁡(ϕ0)<0v(t) = A\omega\sin(\omega t + \phi_0) \implies v(0) < 0 \text{ means } \sin(\phi_0) < 0

    Correct

    v(t)=−Aωsin⁡(ωt+ϕ0)  ⟹  v(0)=−Aωsin⁡(ϕ0)<0  ⟹  sin⁡(ϕ0)>0v(t) = -A\omega\sin(\omega t + \phi_0) \implies v(0) = -A\omega\sin(\phi_0) < 0 \implies \sin(\phi_0) > 0

    The time derivative of cos⁡(ωt+ϕ0)\cos(\omega t + \phi_0) is −ωsin⁡(ωt+ϕ0)-\omega\sin(\omega t + \phi_0). Because of the leading negative sign, a downward velocity v(0)<0v(0) < 0 requires −Aωsin⁡(ϕ0)<0-A\omega\sin(\phi_0) < 0, which means sin⁡(ϕ0)>0\sin(\phi_0) > 0.

  3. Step 3

    ϕ0=5π3 rad\phi_0 = \frac{5\pi}{3}\text{ rad}

    Correct

    ϕ0=π3 rad\phi_0 = \frac{\pi}{3}\text{ rad}

    Since sin⁡(ϕ0)\sin(\phi_0) must be positive, sin⁡(π3)=32>0\sin\left(\frac{\pi}{3}\right) = \frac{\sqrt{3}}{2} > 0 gives downward motion, while sin⁡(5π3)=−32<0\sin\left(\frac{5\pi}{3}\right) = -\frac{\sqrt{3}}{2} < 0 corresponds to upward motion.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the initial position condition y(0)=Acos⁡(ϕ0)y(0) = A\cos(\phi_0) to determine cos⁡(ϕ0)=0.500\cos(\phi_0) = 0.500.

You recognized that the equation yields two valid candidate angles, π3\frac{\pi}{3} and 5π3\frac{5\pi}{3}, within [0,2π) rad[0, 2\pi)\text{ rad}.](streamdown:incomplete-link)

You correctly recognized that the initial direction of motion must be used to eliminate one of the candidate angles.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Calculus derivative sign error in velocity

You omitted the negative sign when taking the derivative of cosine.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the derivative of cos⁡(u)\cos(u) as +sin⁡(u)+\sin(u) instead of −sin⁡(u)-\sin(u), which inverted the sign relationship between initial velocity v(0)v(0) and sin⁡(ϕ0)\sin(\phi_0).

REASONING PATH
Your ACEpath teacher’s suggested approach
Derivative of Cosine Function
  • ddt[cos⁡(ωt+ϕ0)]=−ωsin⁡(ωt+ϕ0)\frac{d}{dt}[\cos(\omega t + \phi_0)] = -\omega\sin(\omega t + \phi_0)

  • Always write down the full velocity expression with the explicit leading negative sign before substituting t=0t = 0.

Phasor / Quadrant Consistency Check
  • In the reference circle phasor representation, counterclockwise rotation from the positive xx-axis means a positive position with downward motion lies in the first quadrant (0<ϕ0<π20 < \phi_0 < \frac{\pi}{2}), where sin⁡(ϕ0)>0\sin(\phi_0) > 0.

  • Sketch a reference circle or phasor to verify whether the oscillator is moving toward equilibrium (positive velocity vs. negative velocity).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Differentiate position with respect to time: v(t)=dydt=−Aωsin⁡(ωt+ϕ0)v(t) = \frac{dy}{dt} = -A\omega\sin(\omega t + \phi_0).

  2. Evaluate at t=0t = 0: v(0)=−Aωsin⁡(ϕ0)v(0) = -A\omega\sin(\phi_0).

  3. Apply the downward motion condition v(0)<0v(0) < 0: since A>0A > 0 and ω>0\omega > 0, −Aωsin⁡(ϕ0)<0  ⟹  sin⁡(ϕ0)>0-A\omega\sin(\phi_0) < 0 \implies \sin(\phi_0) > 0.

  4. Test candidates: sin⁡(π3)=32>0\sin\left(\frac{\pi}{3}\right) = \frac{\sqrt{3}}{2} > 0 and sin⁡(5π3)=−32<0\sin\left(\frac{5\pi}{3}\right) = -\frac{\sqrt{3}}{2} < 0.

Final answer

ϕ0=π3 rad\phi_0 = \frac{\pi}{3}\text{ rad}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review calculus differentiation rules for trigonometric functions, paying close attention to the minus sign for ddx(cos⁡x)=−sin⁡x\frac{d}{dx}(\cos x) = -\sin x.

  • Practice using the reference circle (phasor diagram) technique to visually confirm the sign of velocity for any phase constant.

OverviewACEpath Teacher's Diagnosis

02 The student ignores the velocity direction constraint entirely and simply takes the principal inverse cosine value ϕ₀ = π/3 rad or confuses downward motion with negative angle, incorrectly shifting the angle to 2π - π/3 = 5π/3 rad under the misconception that downward motion corresponds to the negative quadrant angle.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    y(0)=Acos⁡(ϕ0)  ⟹  cos⁡(ϕ0)=0.08000.160=0.500  ⟹  ϕ0=arccos⁡(0.500)=π3y(0) = A\cos(\phi_0) \implies \cos(\phi_0) = \frac{0.0800}{0.160} = 0.500 \implies \phi_0 = \arccos(0.500) = \frac{\pi}{3}

  2. Step 2

    Moving downward means negative phase angle: \text{Moving downward means negative phase angle: } ϕ\phi0 = -π3\frac{\pi}{3}

    Correct

    v(0)=−Aωsin⁡(ϕ0)<0  ⟹  sin⁡(ϕ0)>0v(0) = -A\omega\sin(\phi_0) < 0 \implies \sin(\phi_0) > 0

    Because the velocity is v(t)=−Aωsin⁡(ωt+ϕ0)v(t) = -A\omega\sin(\omega t + \phi_0), a downward velocity (v(0)<0v(0) < 0) requires −Aωsin⁡(ϕ0)<0-A\omega\sin(\phi_0) < 0, which means sin⁡(ϕ0)>0\sin(\phi_0) > 0, placing ϕ0\phi_0 in the upper half-plane.

  3. Step 3
    Correct

    ϕ0=π3 rad\phi_0 = \frac{\pi}{3}\text{ rad}

    Selecting the Quadrant IV angle was a direct result of assuming downward velocity corresponds to a negative phase angle.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly set up the relationship between the initial position and the phase constant using y(0)=Acos⁡(ϕ0)y(0) = A\cos(\phi_0).

You correctly evaluated arccos⁡(0.500)=π3 rad\arccos(0.500) = \frac{\pi}{3}\text{ rad}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign Error in Velocity Derivative

You intuitively equated downward velocity directly to a negative phase angle instead of taking the derivative of position to find the velocity expression.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the negative sign in v(t)=dydt=−Aωsin⁡(ωt+ϕ0)v(t) = \frac{dy}{dt} = -A\omega\sin(\omega t + \phi_0) leads to reversing the sign condition on sin⁡(ϕ0)\sin(\phi_0). Moving in the negative direction (v<0v < 0) requires sin⁡(ϕ0)>0\sin(\phi_0) > 0, which corresponds to Quadrant I or II, not Quadrants III or IV.

REASONING PATH
Your ACEpath teacher’s suggested approach
Differentiate to Find Velocity
  • For y(t)=Acos⁡(ωt+ϕ0)y(t) = A\cos(\omega t + \phi_0), the velocity is v(t)=−Aωsin⁡(ωt+ϕ0)v(t) = -A\omega\sin(\omega t + \phi_0).

  • Always write out v(0)=−Aωsin⁡(ϕ0)v(0) = -A\omega\sin(\phi_0) explicitly before deciding the quadrant of ϕ0\phi_0.

Match the Velocity Sign to Sine
  • Since A>0A > 0 and ω>0\omega > 0, v(0)<0  ⟺  sin⁡(ϕ0)>0v(0) < 0 \iff \sin(\phi_0) > 0, and v(0)>0  ⟺  sin⁡(ϕ0)<0v(0) > 0 \iff \sin(\phi_0) < 0.

  • Combine cos⁡(ϕ0)\cos(\phi_0) and the sign of sin⁡(ϕ0)\sin(\phi_0) to identify the unique quadrant in [0,2π)[0, 2\pi).](streamdown:incomplete-link)

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the velocity function: v(0)=−Aωsin⁡(ϕ0)v(0) = -A\omega\sin(\phi_0).

  2. Apply the condition that the mass moves downward: v(0)<0  ⟹  −Aωsin⁡(ϕ0)<0  ⟹  sin⁡(ϕ0)>0v(0) < 0 \implies -A\omega\sin(\phi_0) < 0 \implies \sin(\phi_0) > 0.

  3. Combine cos⁡(ϕ0)=+12\cos(\phi_0) = +\frac{1}{2} and sin⁡(ϕ0)>0\sin(\phi_0) > 0: ϕ0\phi_0 must lie in Quadrant I.

Final answer

ϕ0=π3 rad\phi_0 = \frac{\pi}{3}\text{ rad}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write down both y(0)y(0) and v(0)v(0) side by side whenever solving for the phase constant in simple harmonic motion.

  • Use the unit circle or phasor representation to verify that ϕ0\phi_0 yields the correct signs for both position and velocity.

OverviewACEpath Teacher's Diagnosis

03 The student confuses the cosine wave model with a sine wave model, setting y(0) = A sin(ϕ₀) and solving sin(ϕ₀) = 0.500.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    y(0)=Asin⁡(ϕ0)  ⟹  0.0800=0.160sin⁡(ϕ0)  ⟹  sin⁡(ϕ0)=0.500  ⟹  ϕ0=π6 or 5π6y(0) = A \sin(\phi_0) \implies 0.0800 = 0.160 \sin(\phi_0) \implies \sin(\phi_0) = 0.500 \implies \phi_0 = \frac{\pi}{6} \text{ or } \frac{5\pi}{6}

    Correct

    y(0)=Acos⁡(ϕ0)  ⟹  0.0800=0.160cos⁡(ϕ0)  ⟹  cos⁡(ϕ0)=0.500  ⟹  ϕ0=π3 or 5π3y(0) = A \cos(\phi_0) \implies 0.0800 = 0.160 \cos(\phi_0) \implies \cos(\phi_0) = 0.500 \implies \phi_0 = \frac{\pi}{3} \text{ or } \frac{5\pi}{3}

    The problem specifies the oscillation formula as y(t)=Acos⁡(ωt+ϕ0)y(t) = A\cos(\omega t + \phi_0), but you set y(0)=Asin⁡(ϕ0)y(0) = A\sin(\phi_0), which led to candidate angles for sine rather than cosine.

  2. Step 2

    v(0)=Aωcos⁡(ϕ0)<0  ⟹  cos⁡(ϕ0)<0 gives ϕ0=5π6 radv(0) = A\omega \cos(\phi_0) < 0 \implies \cos(\phi_0) < 0 \text{ gives } \phi_0 = \frac{5\pi}{6}\text{ rad}

    Correct

    v(0)=−Aωsin⁡(ϕ0)<0  ⟹  sin⁡(ϕ0)>0 gives ϕ0=π3 radv(0) = -A\omega \sin(\phi_0) < 0 \implies \sin(\phi_0) > 0 \text{ gives } \phi_0 = \frac{\pi}{3}\text{ rad}

    You correctly differentiated your assumed model and tested the downward velocity condition, but because the position model was cosine rather than sine, the true velocity function is v(t)=−Aωsin⁡(ωt+ϕ0)v(t) = -A\omega\sin(\omega t + \phi_0).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly substituted the initial position and amplitude values to set up an equation for the phase angle.

You identified both candidate angles within [0,2π)[0, 2\pi) instead of taking only the principal inverse angle.](streamdown:incomplete-link)

You used the sign of the initial velocity to distinguish between the two candidate phase angles.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Trigonometric Function Confusion

Writing y(0)=Asin⁡(ϕ0)y(0) = A\sin(\phi_0) instead of Acos⁡(ϕ0)A\cos(\phi_0).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You defaulted to a familiar sine wave equation rather than matching the specific cosine model y(t)=Acos⁡(ωt+ϕ0)y(t) = A\cos(\omega t + \phi_0) defined in the problem prompt.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match the Given Function
  • Always identify whether the problem defines position using cos⁡(ωt+ϕ0)\cos(\omega t + \phi_0) or sin⁡(ωt+ϕ0)\sin(\omega t + \phi_0) before evaluating at t=0t = 0.

  • Circle or write down the exact given function y(t)=Acos⁡(ωt+ϕ0)y(t) = A\cos(\omega t + \phi_0) as step zero.

Consistent Velocity Derivative
  • For y(t)=Acos⁡(ωt+ϕ0)y(t) = A\cos(\omega t + \phi_0), the velocity is v(t)=−Aωsin⁡(ωt+ϕ0)v(t) = -A\omega\sin(\omega t + \phi_0), so v(0)=−Aωsin⁡(ϕ0)v(0) = -A\omega\sin(\phi_0).

  • Differentiate the exact assigned position function rather than recalling a generic velocity formula.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. y(0)=Acos⁡(ϕ0)  ⟹  0.0800=0.160cos⁡(ϕ0)y(0) = A\cos(\phi_0) \implies 0.0800 = 0.160\cos(\phi_0)

  2. cos⁡(ϕ0)=0.500  ⟹  ϕ0=π3 rad or ϕ0=5π3 rad\cos(\phi_0) = 0.500 \implies \phi_0 = \frac{\pi}{3} \text{ rad or } \phi_0 = \frac{5\pi}{3} \text{ rad}

  3. v(0)=−Aωsin⁡(ϕ0)<0  ⟹  sin⁡(ϕ0)>0v(0) = -A\omega\sin(\phi_0) < 0 \implies \sin(\phi_0) > 0

  4. sin⁡(π3)=32>0 and sin⁡(5π3)=−32<0\sin\left(\frac{\pi}{3}\right) = \frac{\sqrt{3}}{2} > 0 \text{ and } \sin\left(\frac{5\pi}{3}\right) = -\frac{\sqrt{3}}{2} < 0

Final answer

ϕ0=π3 rad\phi_0 = \frac{\pi}{3}\text{ rad}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always underline the base trigonometric function (cos⁡\cos vs sin⁡\sin) in simple harmonic motion problems.

  • Practice deriving v(0)v(0) directly from the chosen position function to ensure the signs match.

Lock it in

Similar question

01

A particle undergoes simple harmonic motion along the xx-axis according to x(t)=Acos⁡(ωt+ϕ0)x(t) = A\cos(\omega t + \phi_0). At t=0 st = 0\text{ s}, the particle is at x(0)=−22Ax(0) = -\frac{\sqrt{2}}{2}A and is moving in the negative xx-direction (v(0)<0v(0) < 0). Find the phase constant ϕ0\phi_0 in the interval [0,2π) rad[0, 2\pi)\text{ rad}.](streamdown:incomplete-link)

Answer

ϕ0=3π4 rad\phi_0 = \frac{3\pi}{4}\text{ rad}. cos⁡(ϕ0)=−22  ⟹  ϕ0=3π4\cos(\phi_0) = -\frac{\sqrt{2}}{2} \implies \phi_0 = \frac{3\pi}{4} or 5π4\frac{5\pi}{4}. Velocity condition: v(0)=−Aωsin⁡(ϕ0)<0  ⟹  sin⁡(ϕ0)>0v(0) = -A\omega\sin(\phi_0) < 0 \implies \sin(\phi_0) > 0. Since sin⁡(3π/4)=+22>0\sin(3\pi/4) = +\frac{\sqrt{2}}{2} > 0 and sin⁡(5π/4)<0\sin(5\pi/4) < 0, ϕ0=3π4 rad\phi_0 = \frac{3\pi}{4}\text{ rad}.

02

An object on a horizontal spring oscillates as x(t)=(0.20 m)cos⁡((4.0 rad/s)t+ϕ0)x(t) = (0.20\text{ m})\cos((4.0\text{ rad/s})t + \phi_0). At t=0 st = 0\text{ s}, its position is x(0)=+0.10 mx(0) = +0.10\text{ m} and its velocity is v(0)=+0.693 m/sv(0) = +0.693\text{ m/s} (moving in the positive direction). Determine ϕ0∈[0,2π) rad\phi_0 \in [0, 2\pi)\text{ rad}.](streamdown:incomplete-link)

Answer

ϕ0=5π3 rad\phi_0 = \frac{5\pi}{3}\text{ rad}. cos⁡(ϕ0)=0.100.20=0.5  ⟹  ϕ0=π3\cos(\phi_0) = \frac{0.10}{0.20} = 0.5 \implies \phi_0 = \frac{\pi}{3} or 5π3\frac{5\pi}{3}. Velocity is v(0)=−(0.20)(4.0)sin⁡(ϕ0)>0  ⟹  sin⁡(ϕ0)<0v(0) = -(0.20)(4.0)\sin(\phi_0) > 0 \implies \sin(\phi_0) < 0. Therefore, ϕ0=5π3 rad\phi_0 = \frac{5\pi}{3}\text{ rad}.

03

A mass oscillates vertically according to y(t)=Asin⁡(ωt+δ0)y(t) = A\sin(\omega t + \delta_0) instead of cosine. At t=0 st = 0\text{ s}, y(0)=+12Ay(0) = +\frac{1}{2}A and the mass is moving downward (v(0)<0v(0) < 0). Determine δ0∈[0,2π) rad\delta_0 \in [0, 2\pi)\text{ rad}.](streamdown:incomplete-link)

Answer

δ0=2π3 rad\delta_0 = \frac{2\pi}{3}\text{ rad}. Differentiating sine gives v(t)=Aωcos⁡(ωt+δ0)v(t) = A\omega\cos(\omega t + \delta_0). At t=0t = 0, y(0)=Asin⁡(δ0)=12A  ⟹  sin⁡(δ0)=12y(0) = A\sin(\delta_0) = \frac{1}{2}A \implies \sin(\delta_0) = \frac{1}{2}, giving candidate angles δ0=π6\delta_0 = \frac{\pi}{6} or 2π3\frac{2\pi}{3}. Downward velocity requires v(0)=Aωcos⁡(δ0)<0  ⟹  cos⁡(δ0)<0v(0) = A\omega\cos(\delta_0) < 0 \implies \cos(\delta_0) < 0. Since cos⁡(2π/3)=−12<0\cos(2\pi/3) = -\frac{1}{2} < 0, the correct phase constant is δ0=2π3 rad\delta_0 = \frac{2\pi}{3}\text{ rad}.

Loading workspace…