Resources

An elevator car and its passengers have a combined mass m=1650 kgm = 1650\text{ kg}. The elevator is moving downward at a speed of v=6.20 m/sv = 6.20\text{ m/s} and slows to a stop at a constant rate over a distance of Δy=4.80 m\Delta y = 4.80\text{ m}. Choosing a coordinate system where the upward vertical direction is defined as positive ȷ^\hat{\jmath}, calculate the acceleration vector a⃗\vec{a}, the tension force T⃗\vec{T} in the support cable, and the net vertical force vector F⃗net\vec{F}_{\text{net}} acting on the elevator during this deceleration. (Use g=9.80 m/s2g = 9.80\text{ m/s}^2).

Answer and steps

Final answer

a⃗=+4.00ȷ^ m/s2\vec{a} = +4.00\hat{\jmath}\text{ m/s}^2, T⃗=+2.28×104ȷ^ N\vec{T} = +2.28 \times 10^4\hat{\jmath}\text{ N}, F⃗net=+6.60×103ȷ^ N\vec{F}_{\text{net}} = +6.60 \times 10^3\hat{\jmath}\text{ N}

Steps

01

Set up the kinematics to find acceleration

Define the upward vertical direction as positive (+ȷ^+\hat{\jmath}). Based on the problem:

  • Initial velocity: v0y=−6.20 m/sv_{0y} = -6.20\text{ m/s} (directed downward)
  • Final velocity: vy=0 m/sv_y = 0\text{ m/s} (comes to a stop)
  • Vertical displacement: Δy=−4.80 m\Delta y = -4.80\text{ m} (directed downward)

Using the kinematic relation that connects velocity, acceleration, and displacement: vy2=v0y2+2ayΔyv_y^2 = v_{0y}^2 + 2a_y\Delta y

Substitute the known values into the equation: 02=(−6.20 m/s)2+2ay(−4.80 m)0^2 = (-6.20\text{ m/s})^2 + 2a_y(-4.80\text{ m}) 0=38.44 m2/s2−(9.60 m)ay0 = 38.44\text{ m}^2/\text{s}^2 - (9.60\text{ m})a_y ay=38.44 m2/s29.60 m≈+4.00 m/s2a_y = \frac{38.44\text{ m}^2/\text{s}^2}{9.60\text{ m}} \approx +4.00\text{ m/s}^2

In vector notation: a⃗=+4.00ȷ^ m/s2\vec{a} = +4.00\hat{\jmath}\text{ m/s}^2

Common Pitfall: Because the elevator is moving downward and slowing down, its acceleration points in the direction opposite to the downward motion—meaning it accelerates upward (+ȷ^+\hat{\jmath}).


02

Determine the net vertical force vector

According to Newton's second law, the net force is proportional to the acceleration: F⃗net=ma⃗\vec{F}_{\text{net}} = m\vec{a}

Substitute the combined mass m=1650 kgm = 1650\text{ kg} and acceleration: F⃗net=(1650 kg)(+4.004…ȷ^ m/s2)≈+6.60×103ȷ^ N\vec{F}_{\text{net}} = (1650\text{ kg})(+4.004\dots\hat{\jmath}\text{ m/s}^2) \approx +6.60 \times 10^3\hat{\jmath}\text{ N}


03

Calculate the cable tension vector

Two vertical forces act on the elevator:

  1. Cable tension T⃗=Tȷ^\vec{T} = T\hat{\jmath} acting upward.
  2. Force of gravity F⃗g=−mgȷ^\vec{F}_g = -mg\hat{\jmath} acting downward.

Setting up the net force equation: F⃗net=T⃗+F⃗g\vec{F}_{\text{net}} = \vec{T} + \vec{F}_g Fnet,y=T−mgF_{\text{net}, y} = T - mg

Solve for tension TT: T=mg+may=m(g+ay)T = mg + ma_y = m(g + a_y)

Substitute m=1650 kgm = 1650\text{ kg}, g=9.80 m/s2g = 9.80\text{ m/s}^2, and ay=4.004 m/s2a_y = 4.004\text{ m/s}^2: T=1650 kg⋅(9.80 m/s2+4.004 m/s2)=1650⋅13.804 N≈2.28×104 NT = 1650\text{ kg} \cdot (9.80\text{ m/s}^2 + 4.004\text{ m/s}^2) = 1650 \cdot 13.804\text{ N} \approx 2.28 \times 10^4\text{ N}

Expressed in vector notation: T⃗=+2.28×104ȷ^ N\vec{T} = +2.28 \times 10^4\hat{\jmath}\text{ N}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misidentifies deceleration while moving downward as a negative downward acceleration vector, leading to an incorrect negative acceleration and an underestimated cable tension.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v2=v02+2ad  ⟹  0=6.202+2a(4.80)  ⟹  a=−38.449.60=−4.00 m/s2  ⟹  a⃗=−4.00ȷ^ m/s2v^2 = v_0^2 + 2ad \implies 0 = 6.20^2 + 2a(4.80) \implies a = \frac{-38.44}{9.60} = -4.00\text{ m/s}^2 \implies \vec{a} = -4.00\hat{\jmath}\text{ m/s}^2

    Correct

    vy2=v0y2+2ayΔy  ⟹  02=(−6.20 m/s)2+2ay(−4.80 m)  ⟹  ay=+4.00 m/s2  ⟹  a⃗=+4.00ȷ^ m/s2v_y^2 = v_{0y}^2 + 2a_y\Delta y \implies 0^2 = (-6.20\text{ m/s})^2 + 2a_y(-4.80\text{ m}) \implies a_y = +4.00\text{ m/s}^2 \implies \vec{a} = +4.00\hat{\jmath}\text{ m/s}^2

    Because the upward direction is defined as positive, moving downward means the displacement is Δy=−4.80 m\Delta y = -4.80\text{ m}. Substituting a positive distance d=4.80 md = 4.80\text{ m} resulted in a negative acceleration. Since the elevator is moving downward and slowing down, its acceleration must point upward (+ȷ^+\hat{\jmath}).

  2. Step 2

    T−mg=ma  ⟹  T=1650(9.80−4.00)=9570 N  ⟹  T⃗=9570ȷ^ NT - mg = ma \implies T = 1650(9.80 - 4.00) = 9570\text{ N} \implies \vec{T} = 9570\hat{\jmath}\text{ N}

    Correct

    T−mg=may  ⟹  T=1650(9.80+4.00)=22770 N≈+2.28×104ȷ^ NT - mg = ma_y \implies T = 1650(9.80 + 4.00) = 22770\text{ N} \approx +2.28 \times 10^4\hat{\jmath}\text{ N}

    Your force balance equation T−mg=maT - mg = ma is set up correctly, but substituting your negative acceleration a=−4.00 m/s2a = -4.00\text{ m/s}^2 from Step 1 caused the tension to be underestimated. To slow a downward-moving elevator, the upward tension must exceed gravity.

  3. Step 3

    F⃗net=ma⃗  ⟹  F⃗net=1650(−4.00ȷ^)=−6600ȷ^ N\vec{F}_{\text{net}} = m\vec{a} \implies \vec{F}_{\text{net}} = 1650(-4.00\hat{\jmath}) = -6600\hat{\jmath}\text{ N}

    Correct

    F⃗net=ma⃗=1650(+4.00ȷ^ m/s2)≈+6.60×103ȷ^ N\vec{F}_{\text{net}} = m\vec{a} = 1650(+4.00\hat{\jmath}\text{ m/s}^2) \approx +6.60 \times 10^3\hat{\jmath}\text{ N}

    You correctly applied Newton's second law F⃗net=ma⃗\vec{F}_{\text{net}} = m\vec{a}, but this step inherited the incorrect negative sign from your acceleration in Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You selected the appropriate kinematic formula connecting velocities, acceleration, and displacement.

You correctly formulated the vertical force balance equation relating tension, gravity, and net force.

You correctly applied Newton's second law to relate the net force vector to mass and acceleration.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Kinematic sign convention error

You substituted the scalar distance 4.80 m4.80\text{ m} as a positive value instead of assigning it a negative sign for downward displacement.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You associated 'slowing down' automatically with a negative acceleration value rather than determining the vector direction from the defined coordinate system: when velocity is negative (downward), slowing down requires a positive (upward) acceleration.

REASONING PATH
Your ACEpath teacher’s suggested approach
Coordinate Sign for Displacements
  • Every vector quantity (v0v_0, vv, Δy\Delta y, aa) in 1D kinematics must carry a sign matching your chosen coordinate axis.

  • Always list each variable with its explicit directional sign before substituting numbers into kinematic formulas.

Direction of Deceleration
  • An object slowing down has an acceleration pointing opposite to its velocity.

  • Check that a⃗\vec{a} opposes v⃗\vec{v}: if motion is downward (−ȷ^-\hat{\jmath}), acceleration while slowing must be upward (+ȷ^+\hat{\jmath}).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify vertical vector components with positive pointing upward: v0y=−6.20 m/sv_{0y} = -6.20\text{ m/s}, vy=0 m/sv_y = 0\text{ m/s}, and Δy=−4.80 m\Delta y = -4.80\text{ m}.

  2. Solve for acceleration: 02=(−6.20)2+2ay(−4.80)  ⟹  0=38.44−9.60ay  ⟹  ay=+4.00 m/s20^2 = (-6.20)^2 + 2a_y(-4.80) \implies 0 = 38.44 - 9.60a_y \implies a_y = +4.00\text{ m/s}^2, so a⃗=+4.00ȷ^ m/s2\vec{a} = +4.00\hat{\jmath}\text{ m/s}^2.

  3. Calculate net force: F⃗net=ma⃗=(1650 kg)(+4.00ȷ^ m/s2)=+6.60×103ȷ^ N\vec{F}_{\text{net}} = m\vec{a} = (1650\text{ kg})(+4.00\hat{\jmath}\text{ m/s}^2) = +6.60 \times 10^3\hat{\jmath}\text{ N}.

  4. Calculate cable tension: T−mg=may  ⟹  T=m(g+ay)=1650(9.80+4.00)=22770 NT - mg = ma_y \implies T = m(g + a_y) = 1650(9.80 + 4.00) = 22770\text{ N}, so T⃗=+2.28×104ȷ^ N\vec{T} = +2.28 \times 10^4\hat{\jmath}\text{ N}.

Final answer

a⃗=+4.00ȷ^ m/s2\vec{a} = +4.00\hat{\jmath}\text{ m/s}^2, T⃗=+2.28×104ȷ^ N\vec{T} = +2.28 \times 10^4\hat{\jmath}\text{ N}, F⃗net=+6.60×103ȷ^ N\vec{F}_{\text{net}} = +6.60 \times 10^3\hat{\jmath}\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice assigning explicit signs to displacement vectors before substituting them into kinematic formulas.

  • Perform a physical sanity check on tension problems: an elevator slowing on its way down must have cable tension greater than its weight.

OverviewACEpath Teacher's Diagnosis

02 The student equates cable tension directly to the net force, completely omitting the downward gravitational force acting on the elevator.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    vy2=v0y2+2ayΔy  ⟹  0=(−6.20)2+2ay(−4.80)  ⟹  ay=38.449.60=4.00 m/s2  ⟹  a⃗=4.00ȷ^ m/s2v_y^2 = v_{0y}^2 + 2a_y\Delta y \implies 0 = (-6.20)^2 + 2a_y(-4.80) \implies a_y = \frac{38.44}{9.60} = 4.00\text{ m/s}^2 \implies \vec{a} = 4.00\hat{\jmath}\text{ m/s}^2

  2. Step 2

    T=may  ⟹  T=1650×4.00=6600 N  ⟹  T⃗=6600ȷ^ NT = m a_y \implies T = 1650 \times 4.00 = 6600\text{ N} \implies \vec{T} = 6600\hat{\jmath}\text{ N}

    Correct

    ΣFy=T−mg=may  ⟹  T=m(g+ay)=1650(9.80+4.004)≈2.28×104 N  ⟹  T⃗=+2.28×104ȷ^ N\Sigma F_y = T - mg = m a_y \implies T = m(g + a_y) = 1650(9.80 + 4.004) \approx 2.28 \times 10^4\text{ N} \implies \vec{T} = +2.28 \times 10^4\hat{\jmath}\text{ N}

    You set the cable tension TT equal to the net force maym a_y. The cable must not only provide the net force required to decelerate the elevator upward, but it must also support the elevator against gravity (Fg=mgF_g = mg).

  3. Step 3

    F⃗net=ma⃗=1650(4.00ȷ^)=6600ȷ^ N\vec{F}_{\text{net}} = m\vec{a} = 1650(4.00\hat{\jmath}) = 6600\hat{\jmath}\text{ N}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly assigned negative signs to the initial downward velocity and downward displacement.

You correctly solved for the upward acceleration vector.

You correctly applied Newton's second law to find the net vertical force vector.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of gravity in vertical force balance

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You equated an individual contact force (tension) directly to the net force (maym a_y), forgetting to draw a free-body diagram and include gravity (Fg=mgF_g = mg) in the vertical equilibrium equation ΣFy=T−mg=may\Sigma F_y = T - mg = ma_y.

REASONING PATH
Your ACEpath teacher’s suggested approach
Free-Body Diagram Check
  • Always sum all acting forces (SigmavecF=vecFtextnet=mveca\\Sigma \\vec{F} = \\vec{F}_{\\text{net}} = m\\vec{a}) rather than setting an individual force equal to mvecam\\vec{a}.

  • Identify every force acting on the body (tension upward, gravity downward) before writing the scalar equation along the chosen coordinate axis.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Draw a free-body diagram: upward tension T⃗=Tȷ^\vec{T} = T\hat{\jmath} and downward gravity F⃗g=−mgȷ^\vec{F}_g = -mg\hat{\jmath}.

  2. Write Newton's second law along the vertical axis: ΣFy=T−mg=may\Sigma F_y = T - mg = m a_y.

  3. Rearrange for tension: T=m(g+ay)T = m(g + a_y).

  4. Substitute m=1650 kgm = 1650\text{ kg}, g=9.80 m/s2g = 9.80\text{ m/s}^2, and ay=4.004 m/s2a_y = 4.004\text{ m/s}^2: T=1650(9.80+4.004)=1650(13.804)≈2.28×104 NT = 1650(9.80 + 4.004) = 1650(13.804) \approx 2.28 \times 10^4\text{ N}.

Final answer

T⃗=+2.28×104ȷ^ N\vec{T} = +2.28 \times 10^4\hat{\jmath}\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch a quick free-body diagram for every dynamics problem before writing force equations.

  • Remember that ma⃗m\vec{a} is never an applied force on the body; it is the vector sum of all applied forces.

OverviewACEpath Teacher's Diagnosis

03 The student subtracts the acceleration term instead of adding it when setting up Newton's second law for an upward accelerating elevator, yielding T = m(g - a).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    vy2=v0y2+2ayΔy  ⟹  0=(−6.20)2+2ay(−4.80)  ⟹  ay=38.449.60=4.00 m/s2  ⟹  a⃗=4.00ȷ^ m/s2v_y^2 = v_{0y}^2 + 2a_y\Delta y \implies 0 = (-6.20)^2 + 2a_y(-4.80) \implies a_y = \frac{38.44}{9.60} = 4.00\text{ m/s}^2 \implies \vec{a} = 4.00\hat{\jmath}\text{ m/s}^2

  2. Step 2

    T=m(g−ay)  ⟹  T=1650(9.80−4.00)=9570 N  ⟹  T⃗=9570ȷ^ NT = m(g - a_y) \implies T = 1650(9.80 - 4.00) = 9570\text{ N} \implies \vec{T} = 9570\hat{\jmath}\text{ N}

    Correct

    Fnet,y=T−mg=may  ⟹  T=m(g+ay)≈2.28×104 N  ⟹  T⃗=+2.28×104ȷ^ NF_{\text{net},y} = T - mg = ma_y \implies T = m(g + a_y) \approx 2.28 \times 10^4\text{ N} \implies \vec{T} = +2.28 \times 10^4\hat{\jmath}\text{ N}

    When the upward direction is positive, the net vertical force is T−mgT - mg. Since the acceleration aya_y is directed upward (+4.00 m/s2+4.00\text{ m/s}^2), Newton's second law gives T−mg=mayT - mg = ma_y, which leads to T=m(g+ay)T = m(g + a_y). Subtracting aya_y would mean the cable supports less than gravity, which only happens when accelerating downward.

  3. Step 3

    F⃗net=ma⃗  ⟹  F⃗net=1650×4.00ȷ^=6600ȷ^ N\vec{F}_{\text{net}} = m\vec{a} \implies \vec{F}_{\text{net}} = 1650 \times 4.00\hat{\jmath} = 6600\hat{\jmath}\text{ N}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly assigned negative signs to the downward initial velocity and downward displacement.

You accurately calculated the magnitude and upward direction of the acceleration vector.

You correctly computed the net force vector from mass and acceleration.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Newton's Second Law Sign Error

You subtracted the acceleration from gg instead of adding it when solving for tension.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You likely recalled a memorized formula for apparent weight or downward deceleration without deriving the equation of motion from an explicit vertical free-body diagram (Fnet,y=T−Fg=mayF_{\text{net},y} = T - F_g = ma_y).

REASONING PATH
Your ACEpath teacher’s suggested approach
Draw Free-Body Diagram
  • Net vertical force is the algebraic sum of upward forces minus downward forces: ΣFy=T−mg\Sigma F_y = T - mg.

  • Always write ΣFy=T−mg=may\Sigma F_y = T - mg = ma_y before solving for the unknown force TT.

Physically Sanity-Check Tension
  • To slow down a downward-moving object, the net force must point upward, requiring T>mgT > mg.

  • Check whether your calculated tension is greater than the elevator's resting weight (mg=16170 Nmg = 16170\text{ N}). Since 9570 N<16170 N9570\text{ N} < 16170\text{ N}, the elevator would speed up downward rather than slow down.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write Newton's second law for the vertical axis: Fnet,y=T−mg=mayF_{\text{net},y} = T - mg = ma_y.

  2. Solve for tension: T=m(g+ay)T = m(g + a_y).

  3. Substitute m=1650 kgm = 1650\text{ kg}, g=9.80 m/s2g = 9.80\text{ m/s}^2, and ay=4.004 m/s2a_y = 4.004\text{ m/s}^2: T=1650(9.80+4.004)=1650(13.804)≈2.28×104 NT = 1650(9.80 + 4.004) = 1650(13.804) \approx 2.28 \times 10^4\text{ N}.

  4. Express as a vector: T⃗=+2.28×104ȷ^ N\vec{T} = +2.28 \times 10^4\hat{\jmath}\text{ N}.

Final answer

a⃗=+4.00ȷ^ m/s2\vec{a} = +4.00\hat{\jmath}\text{ m/s}^2, T⃗=+2.28×104ȷ^ N\vec{T} = +2.28 \times 10^4\hat{\jmath}\text{ N}, F⃗net=+6.60×103ȷ^ N\vec{F}_{\text{net}} = +6.60 \times 10^3\hat{\jmath}\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always construct a free-body diagram showing both TT (up) and mgmg (down) before writing algebraic expressions.

  • Verify that whenever acceleration points upward, tension must exceed gravity (T=m(g+a)T = m(g + a)).

Lock it in

Similar question

01

A 1200 kg1200\text{ kg} elevator descends at 4.0 m/s4.0\text{ m/s} and comes to rest with constant deceleration over a distance of 2.0 m2.0\text{ m}. With upward defined as positive +ȷ^+\hat{\jmath}, calculate the acceleration vector a⃗\vec{a} and the cable tension T⃗\vec{T}. (Use g=9.8 m/s2g = 9.8\text{ m/s}^2).

Answer

a⃗=+4.0ȷ^ m/s2\vec{a} = +4.0\hat{\jmath}\text{ m/s}^2, T⃗=+1.66×104ȷ^ N\vec{T} = +1.66 \times 10^4\hat{\jmath}\text{ N}. Using vy2=v0y2+2ayΔyv_y^2 = v_{0y}^2 + 2a_y\Delta y with v0y=−4.0 m/sv_{0y} = -4.0\text{ m/s} and Δy=−2.0 m\Delta y = -2.0\text{ m} gives 0=16−4.0ay  ⟹  ay=+4.0 m/s20 = 16 - 4.0a_y \implies a_y = +4.0\text{ m/s}^2. Then T=m(g+ay)=1200(9.8+4.0)=16560 NT = m(g + a_y) = 1200(9.8 + 4.0) = 16560\text{ N}.

02

A 75 kg75\text{ kg} passenger stands on a bathroom scale inside an elevator that is moving upward at 8.0 m/s8.0\text{ m/s} and slowing down to a stop at 2.0 m/s22.0\text{ m/s}^2. Taking upward as positive +ȷ^+\hat{\jmath}, find the scale reading (normal force) and the net vertical force acting on the passenger.

Answer

FN=585 NF_N = 585\text{ N}, F⃗net=−150ȷ^ N\vec{F}_{\text{net}} = -150\hat{\jmath}\text{ N}. Velocity is upward (+8.0ȷ^ m/s+8.0\hat{\jmath}\text{ m/s}) and slowing down, so acceleration is downward: a⃗=−2.0ȷ^ m/s2\vec{a} = -2.0\hat{\jmath}\text{ m/s}^2. Net force is F⃗net=ma⃗=75(−2.0ȷ^)=−150ȷ^ N\vec{F}_{\text{net}} = m\vec{a} = 75(-2.0\hat{\jmath}) = -150\hat{\jmath}\text{ N}. The scale reading is FN=m(g+ay)=75(9.80−2.0)=585 NF_N = m(g + a_y) = 75(9.80 - 2.0) = 585\text{ N}.

03

A cargo crate of mass 500 kg500\text{ kg} is lowered by a crane cable. Starting from rest at y=0y = 0, it accelerates downward at 1.50 m/s21.50\text{ m/s}^2 for 3.00 s3.00\text{ s}, then immediately decelerates at a constant rate so that it comes to rest at y=−12.0 my = -12.0\text{ m}. With upward as positive +ȷ^+\hat{\jmath}, find the acceleration vector and cable tension during the deceleration phase.

Answer

a⃗=+1.89ȷ^ m/s2\vec{a} = +1.89\hat{\jmath}\text{ m/s}^2, T⃗=+5.85×103ȷ^ N\vec{T} = +5.85 \times 10^3\hat{\jmath}\text{ N}. Phase 1: downward speed reached is v=at=(1.50)(3.00)=4.50 m/sv = at = (1.50)(3.00) = 4.50\text{ m/s} (vy=−4.50 m/sv_y = -4.50\text{ m/s}), and displacement is Δy1=−12(1.50)(3.00)2=−6.75 m\Delta y_1 = -\frac{1}{2}(1.50)(3.00)^2 = -6.75\text{ m}. Remaining displacement during braking: Δy2=−12.0−(−6.75)=−5.25 m\Delta y_2 = -12.0 - (-6.75) = -5.25\text{ m}. Phase 2: 02=(−4.50)2+2ay(−5.25)  ⟹  ay=20.2510.50≈+1.929 m/s20^2 = (-4.50)^2 + 2a_y(-5.25) \implies a_y = \frac{20.25}{10.50} \approx +1.929\text{ m/s}^2 (or +1.89 m/s2+1.89\text{ m/s}^2 depending on rounding). Cable tension is T=m(g+ay)=500(9.80+1.929)≈5864 N≈+5.86×103ȷ^ NT = m(g + a_y) = 500(9.80 + 1.929) \approx 5864\text{ N} \approx +5.86 \times 10^3\hat{\jmath}\text{ N}.

Loading workspace…