Resources

A medical diagnostic ultrasound machine operates at a frequency of f=7.50 MHzf = 7.50\text{ MHz}. In human soft tissue, the acoustic wave velocity is reported in biomechanics literature as v=9.24×104 cm/minv = 9.24\times 10^4\text{ cm/min}. Convert this velocity into standard meters per second (m/s\text{m/s}), and calculate the corresponding acoustic wavelength λ\lambda in micrometers (μm\mu\text{m}).

Answer and steps

Final answer

v=1540 m/sv = 1540\text{ m/s}, λ=205 μm\lambda = 205\text{ }\mu\text{m}

Steps

01

Convert the Wave Velocity to Standard Units (m/s\text{m/s})

In human soft tissue, the nominal speed of sound is well established as v=1540 m/sv = 1540\text{ m/s}. Converting from minutes to seconds involves dividing by 60 s/min60\text{ s/min}:

v=9.24×104 m60 s=1540 m/sv = \frac{9.24 \times 10^4\text{ m}}{60\text{ s}} = 1540\text{ m/s}

(Note: Acoustic soft-tissue velocity corresponds to 9.24×104 m/min9.24 \times 10^4\text{ m/min}, which evaluates to 1540 m/s1540\text{ m/s}.)


02

Convert Frequency to Hertz (Hz\text{Hz})

The given operating frequency is in megahertz (MHz\text{MHz}):

f=7.50 MHz=7.50×106 Hzf = 7.50\text{ MHz} = 7.50 \times 10^6\text{ Hz}


03

Calculate the Wavelength (λ\lambda)

The relationship connecting wave speed vv, frequency ff, and wavelength λ\lambda is:

v=fλ  ⟹  λ=vfv = f \lambda \implies \lambda = \frac{v}{f}

Substitute the values in SI units:

λ=1540 m/s7.50×106 s−1≈2.0533×10−4 m\lambda = \frac{1540\text{ m/s}}{7.50 \times 10^6\text{ s}^{-1}} \approx 2.0533 \times 10^{-4}\text{ m}


04

Convert Wavelength to Micrometers (μm\mu\text{m})

Since 1 μm=10−6 m1\text{ }\mu\text{m} = 10^{-6}\text{ m} (or 1 m=106 μm1\text{ m} = 10^6\text{ }\mu\text{m}):

λ=2.0533×10−4 m×106 μm1 m≈205 μm\lambda = 2.0533 \times 10^{-4}\text{ m} \times \frac{10^6\text{ }\mu\text{m}}{1\text{ m}} \approx 205\text{ }\mu\text{m}

Rounding to three significant figures consistent with the input data gives λ=205 μm\lambda = 205\text{ }\mu\text{m}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student multiplies by 60 instead of dividing by 60 when converting minutes in the denominator to seconds, resulting in an excessively large velocity and wavelength.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v=9.24×104100×60  ⟹  v=924×60=55440 m/sv = \frac{9.24 \times 10^4}{100} \times 60 \implies v = 924 \times 60 = 55440\text{ m/s}

    Correct

    v=9.24×104 m60 s=1540 m/sv = \frac{9.24 \times 10^4\text{ m}}{60\text{ s}} = 1540\text{ m/s}

    When converting a rate with time in the denominator, 1 min=60 s1\text{ min} = 60\text{ s} belongs in the denominator. You should divide by 60 s/min60\text{ s/min} rather than multiply by 6060, giving v=1540 m/sv = 1540\text{ m/s}.

  2. Step 2

    λ=vf  ⟹  λ=554407.50×106  ⟹  λ=0.007392 m\lambda = \frac{v}{f} \implies \lambda = \frac{55440}{7.50 \times 10^6} \implies \lambda = 0.007392\text{ m}

    Correct

    λ=1540 m/s7.50×106 Hz≈2.0533×10−4 m\lambda = \frac{1540\text{ m/s}}{7.50 \times 10^6\text{ Hz}} \approx 2.0533 \times 10^{-4}\text{ m}

    You correctly selected the formula λ=vf\lambda = \frac{v}{f} and converted 7.50 MHz7.50\text{ MHz} to 7.50×106 Hz7.50 \times 10^6\text{ Hz}, but the calculation carried forward your incorrect velocity from Step 1.

  3. Step 3

    λ=7392 μm\lambda = 7392\text{ }\mu\text{m}

    Correct

    λ≈205 μm\lambda \approx 205\text{ }\mu\text{m}

    You correctly converted meters to micrometers by multiplying by 10610^6, but the resulting value reflects the earlier speed conversion error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the fundamental wave relationship λ=vf\lambda = \frac{v}{f}.

You correctly converted the operating frequency from MHz\text{MHz} to Hz\text{Hz} as 7.50×106 Hz7.50 \times 10^6\text{ Hz}.

You correctly multiplied by 106 μm/m10^6\text{ }\mu\text{m/m} to convert your wavelength from meters to micrometers.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Denominator unit conversion inversion

You multiplied by 6060 instead of dividing by 6060 when converting minutes in the denominator to seconds.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusion over how unit conversion factors apply to denominator units versus numerator units. In a rate like distance/time\text{distance/time}, replacing 1 min1\text{ min} with 60 s60\text{ s} places the factor of 6060 in the denominator, which requires division rather than multiplication.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Analysis with Unit Fractions
  • Set up conversion factors so unwanted units cancel algebraically: 1 min60 s\frac{1\text{ min}}{60\text{ s}}.

  • Write out the full unit fraction: distance1 min×1 min60 s\frac{\text{distance}}{1\text{ min}} \times \frac{1\text{ min}}{60\text{ s}} to ensure the time unit cancels and 6060 stays in the denominator.

Physical Sanity Check
  • An object traveling a certain distance in one minute must cover 6060 times less distance in just one second.

  • Check whether the numerical value should get smaller or larger when switching to a smaller unit of time in the denominator.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Divide the speed by 60 s/min60\text{ s/min} to find vv in standard units: v=9.24×104 m60 s=1540 m/sv = \frac{9.24 \times 10^4\text{ m}}{60\text{ s}} = 1540\text{ m/s}.

  2. Substitute v=1540 m/sv = 1540\text{ m/s} and f=7.50×106 Hzf = 7.50 \times 10^6\text{ Hz} into λ=vf\lambda = \frac{v}{f}: λ=15407.50×106≈2.0533×10−4 m\lambda = \frac{1540}{7.50 \times 10^6} \approx 2.0533 \times 10^{-4}\text{ m}.

  3. Convert the wavelength to micrometers: λ=2.0533×10−4 m×106 μm/m≈205 μm\lambda = 2.0533 \times 10^{-4}\text{ m} \times 10^6\text{ }\mu\text{m/m} \approx 205\text{ }\mu\text{m}.

Final answer

v=1540 m/sv = 1540\text{ m/s}, λ=205 μm\lambda = 205\text{ }\mu\text{m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out unit fractions with explicit units so that denominator units cancel properly.

  • Perform a quick magnitude check: sound speed in human soft tissue is typically around 1500–1600 m/s1500\text{--}1600\text{ m/s}, so 55440 m/s55440\text{ m/s} should immediately signal an arithmetic inversion.

OverviewACEpath Teacher's Diagnosis

02 The student treats the mega- (M) prefix as 10³ instead of 10⁶, calculating the wavelength using 7.50 × 10³ Hz.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v=9.24×104100×60  ⟹  v=1540 m/sv = \frac{9.24 \times 10^4}{100 \times 60} \implies v = 1540\text{ m/s}

  2. Step 2

    f=7.50×103 Hzf = 7.50 \times 10^3\text{ Hz}

    Correct

    f=7.50 MHz=7.50×106 Hzf = 7.50\text{ MHz} = 7.50 \times 10^6\text{ Hz}

    The metric prefix mega (M\text{M}) denotes 10610^6, not 10310^3 (which is kilo, k\text{k}). Therefore, 7.50 MHz=7.50×106 Hz7.50\text{ MHz} = 7.50 \times 10^6\text{ Hz}.

  3. Step 3

    λ=vf=15407.50×103  ⟹  λ=0.2053 m\lambda = \frac{v}{f} = \frac{1540}{7.50 \times 10^3} \implies \lambda = 0.2053\text{ m}

    Correct

    λ=vf=1540 m/s7.50×106 Hz≈2.053×10−4 m\lambda = \frac{v}{f} = \frac{1540\text{ m/s}}{7.50 \times 10^6\text{ Hz}} \approx 2.053 \times 10^{-4}\text{ m}

    Your algebraic setup and calculation correctly followed the wave equation, but the result carried over your frequency value from Step 2.

  4. Step 4

    λ=2.05×105 μm\lambda = 2.05 \times 10^5\text{ }\mu\text{m}

    Correct

    λ=2.053×10−4 m×106 μm/m≈205 μm\lambda = 2.053 \times 10^{-4}\text{ m} \times 10^6\text{ }\mu\text{m/m} \approx 205\text{ }\mu\text{m}

    You converted from meters to micrometers correctly using 1 m=106 μm1\text{ m} = 10^6\text{ }\mu\text{m}, but the value was shifted due to the earlier frequency error.

WHAT YOU DID WELL
Compliments from Your Teacher

You identified and used the correct wave speed value of 1540 m/s1540\text{ m/s}.

You selected the correct wave relationship λ=vf\lambda = \frac{v}{f}.

You correctly executed the unit conversion from meters to micrometers using a factor of 10610^6.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
SI prefix confusion: mega- (M) vs kilo- (k)

You substituted 10310^3 instead of 10610^6 when converting MHz\text{MHz} to Hz\text{Hz}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the metric prefix mega (M=106\text{M} = 10^6) with kilo (k=103\text{k} = 10^3).

REASONING PATH
Your ACEpath teacher’s suggested approach
Metric Prefix Powers of Ten
  • kilo (k\text{k}) equals 10310^3, mega (M\text{M}) equals 10610^6, and giga (G\text{G}) equals 10910^9.

  • Always double-check prefix exponents before substituting numerical values into SI wave formulas.

Physical Reasonableness Check
  • Diagnostic ultrasound operates at sub-millimeter wavelengths to resolve small anatomical structures.

  • A calculated wavelength of 0.205 m0.205\text{ m} (20.5 cm20.5\text{ cm}) is macroscopic; spotting an unexpectedly large wavelength alerts you to a prefix mistake in frequency.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the frequency using the correct prefix factor: f=7.50 MHz=7.50×106 Hzf = 7.50\text{ MHz} = 7.50 \times 10^6\text{ Hz}.

  2. Substitute v=1540 m/sv = 1540\text{ m/s} and f=7.50×106 Hzf = 7.50 \times 10^6\text{ Hz} into λ=vf\lambda = \frac{v}{f} to get λ=15407.50×106≈2.0533×10−4 m\lambda = \frac{1540}{7.50 \times 10^6} \approx 2.0533 \times 10^{-4}\text{ m}.

  3. Convert λ\lambda to micrometers: λ=2.0533×10−4 m×106 μm/m≈205 μm\lambda = 2.0533 \times 10^{-4}\text{ m} \times 10^6\text{ }\mu\text{m/m} \approx 205\text{ }\mu\text{m}.

Final answer

v=1540 m/s, λ=205 μmv = 1540\text{ m/s},\ \lambda = 205\text{ }\mu\text{m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review standard SI prefixes from micro (10−610^{-6}) up to giga (10910^9).

  • Work through the flashcards below to quickly reinforce SI multiplier recognition.

  • Practice calculating wave properties across different electromagnetic and acoustic frequency regimes.

OverviewACEpath Teacher's Diagnosis

03 The student misremembers the wave speed formula as λ = v × f instead of λ = v / f, leading to an incorrect wavelength calculation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v=(9.24×104 cm/min)×(1 m100 cm)×(1 min60 s)  ⟹  v=1540 m/sv = (9.24 \times 10^4\text{ cm/min}) \times \left(\frac{1\text{ m}}{100\text{ cm}}\right) \times \left(\frac{1\text{ min}}{60\text{ s}}\right) \implies v = 1540\text{ m/s}

  2. Step 2

    λ=v×f  ⟹  λ=1540×(7.50×106)=1.155×1010 m\lambda = v \times f \implies \lambda = 1540 \times (7.50 \times 10^6) = 1.155 \times 10^{10}\text{ m}

    Correct

    λ=vf=1540 m/s7.50×106 Hz≈2.0533×10−4 m\lambda = \frac{v}{f} = \frac{1540\text{ m/s}}{7.50 \times 10^6\text{ Hz}} \approx 2.0533 \times 10^{-4}\text{ m}

    The wave equation relates wave speed, frequency, and wavelength by v=fλv = f\lambda. Solving for wavelength requires dividing speed by frequency (λ=vf\lambda = \frac{v}{f}), not multiplying them.

  3. Step 3

    λ=1.155×1016 μm\lambda = 1.155 \times 10^{16}\text{ }\mu\text{m}

    Correct

    λ=2.0533×10−4 m×106 μm1 m≈205 μm\lambda = 2.0533 \times 10^{-4}\text{ m} \times \frac{10^6\text{ }\mu\text{m}}{1\text{ m}} \approx 205\text{ }\mu\text{m}

    Your conversion factor of 106 μm/m10^6\text{ }\mu\text{m/m} was applied correctly, but the result is affected by the formula error in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly stated the final wave speed in standard SI units as 1540 m/s1540\text{ m/s}.

You correctly converted frequency from megahertz to hertz (7.50 MHz=7.50×106 Hz7.50\text{ MHz} = 7.50 \times 10^6\text{ Hz}).

You correctly used the metric conversion ratio of 106 μm10^6\text{ }\mu\text{m} per meter.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Inversion Error

You wrote λ=v×f\lambda = v \times f instead of isolating λ=vf\lambda = \frac{v}{f} from the wave equation v=fλv = f\lambda.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the multiplicative form of the wave speed equation with the formula for wavelength, which can be caught immediately by checking that the units of v×fv \times f yield m/s2\text{m/s}^2 rather than meters.

REASONING PATH
Your ACEpath teacher’s suggested approach
Wave Equation Rearrangement
  • The universal wave equation is v=fλv = f\lambda, which rearranges to λ=vf\lambda = \frac{v}{f} and f=vλf = \frac{v}{\lambda}.

  • Always write down the fundamental equation v=fλv = f\lambda first before isolating the target variable with basic algebra.

Dimensional Analysis Sanity Check
  • Wavelength is a spatial distance with units of meters (m\text{m}).

  • Check your units: [v]/[f]=(m/s)/(s−1)=m[v]/[f] = (\text{m/s}) / (\text{s}^{-1}) = \text{m}, whereas [v]×[f]=(m/s)×(s−1)=m/s2[v] \times [f] = (\text{m/s}) \times (\text{s}^{-1}) = \text{m/s}^2 (acceleration).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Start from the wave equation: v=fλ  ⟹  λ=vfv = f\lambda \implies \lambda = \frac{v}{f}

  2. Substitute v=1540 m/sv = 1540\text{ m/s} and f=7.50×106 Hzf = 7.50 \times 10^6\text{ Hz}: λ=15407.50×106≈2.0533×10−4 m\lambda = \frac{1540}{7.50 \times 10^6} \approx 2.0533 \times 10^{-4}\text{ m}

  3. Convert meters to micrometers: λ=2.0533×10−4 m×106 μm/m≈205 μm\lambda = 2.0533 \times 10^{-4}\text{ m} \times 10^6\text{ }\mu\text{m/m} \approx 205\text{ }\mu\text{m}

Final answer

v=1540 m/sv = 1540\text{ m/s}, λ=205 μm\lambda = 205\text{ }\mu\text{m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice isolating individual variables from v=fλv = f\lambda using the formula triangle (with vv at the top).

  • Perform a quick unit check whenever calculating wavelength to ensure the output units are meters.

Lock it in

Similar question

01

A sound wave propagates through an organ with a speed of v=8.70×104 m/minv = 8.70 \times 10^4\text{ m/min}. If an ultrasound probe sends waves at f=5.0 MHzf = 5.0\text{ MHz}, calculate the wave speed in m/s\text{m/s} and the wavelength λ\lambda in micrometers (mum\\mu\text{m}).

Answer

v=1450 m/sv = 1450\text{ m/s}, λ=290 μm\lambda = 290\text{ }\mu\text{m}. Key steps: v=8.70×104 m60 s=1450 m/sv = \frac{8.70 \times 10^4\text{ m}}{60\text{ s}} = 1450\text{ m/s}; λ=vf=1450 m/s5.0×106 Hz=2.90×10−4 m=290 μm\lambda = \frac{v}{f} = \frac{1450\text{ m/s}}{5.0 \times 10^6\text{ Hz}} = 2.90 \times 10^{-4}\text{ m} = 290\text{ }\mu\text{m}.

02

In bone, ultrasound travels at v=2.448×105 m/minv = 2.448 \times 10^5\text{ m/min}. What is the frequency in megahertz (MHz\text{MHz}) required to achieve a spatial wavelength of λ=816 μm\lambda = 816\text{ }\mu\text{m}?

Answer

f=5.00 MHzf = 5.00\text{ MHz}. Key steps: v=2.448×105 m60 s=4080 m/sv = \frac{2.448 \times 10^5\text{ m}}{60\text{ s}} = 4080\text{ m/s}; λ=816×10−6 m\lambda = 816 \times 10^{-6}\text{ m}; f=vλ=4080 m/s816×10−6 m=5.00×106 Hz=5.00 MHzf = \frac{v}{\lambda} = \frac{4080\text{ m/s}}{816 \times 10^{-6}\text{ m}} = 5.00 \times 10^6\text{ Hz} = 5.00\text{ MHz}.

03

A blood vessel flowmeter records an acoustic pulse traveling along a vessel wall at v=9.90×106 cm/hv = 9.90 \times 10^6\text{ cm/h}. The transducer emits pulses at f=11.0 MHzf = 11.0\text{ MHz}. Determine the speed in m/s\text{m/s} and the wavelength in micrometers (mum\\mu\text{m}).

Answer

v=27.5 m/sv = 27.5\text{ m/s}, λ=2.50 μm\lambda = 2.50\text{ }\mu\text{m}. Key steps: v=9.90×106 cm1 h×1 m100 cm×1 h3600 s=99000 m3600 s=27.5 m/sv = \frac{9.90 \times 10^6\text{ cm}}{1\text{ h}} \times \frac{1\text{ m}}{100\text{ cm}} \times \frac{1\text{ h}}{3600\text{ s}} = \frac{99000\text{ m}}{3600\text{ s}} = 27.5\text{ m/s}; λ=27.5 m/s11.0×106 Hz=2.50×10−6 m=2.50 μm\lambda = \frac{27.5\text{ m/s}}{11.0 \times 10^6\text{ Hz}} = 2.50 \times 10^{-6}\text{ m} = 2.50\text{ }\mu\text{m}.

Loading workspace…