Resources

A small oil droplet with mass m=3.20×10−14 kgm = 3.20 \times 10^{-14}\text{ kg} carrying an excess of 55 electrons is suspended in mechanical equilibrium between two horizontal parallel conducting plates separated by a distance of d=1.60 cmd = 1.60\text{ cm}. Neglecting buoyancy, calculate the electric-field strength EE required between the plates to balance the downward gravitational force on the droplet. Use g=9.80 m/s2g = 9.80\text{ m/s}^2 and the elementary charge e=1.602×10−19 Ce = 1.602 \times 10^{-19}\text{ C}.

Answer and steps

Final answer

E=3.92×105 N/CE = 3.92 \times 10^5\text{ N/C}

Steps

01

Identify the condition for equilibrium

For the oil droplet to remain suspended stationary (in mechanical equilibrium), the net force acting on it must be zero:

∑Fy=0\sum F_y = 0

Two forces act vertically on the droplet:

  • The downward gravitational force: Fg=mgF_g = mg
  • An upward electric force: Fe=qEF_e = qE

Equating the magnitudes of these opposing forces gives:

qE=mgqE = mg


02

Determine the charge of the droplet

The droplet carries an excess of n=5n = 5 electrons. Using the elementary charge e=1.602×10−19 Ce = 1.602 \times 10^{-19}\text{ C}, the magnitude of the droplet's charge is:

q=n⋅e=5⋅(1.602×10−19 C)=8.01×10−19 Cq = n \cdot e = 5 \cdot (1.602 \times 10^{-19}\text{ C}) = 8.01 \times 10^{-19}\text{ C}

Direction Note: Because the droplet is negatively charged, an upward electric force requires the electric field E⃗\vec{E} to point downward (from the positive top plate toward the negative bottom plate).


03

Calculate the electric-field strength

Solve for the electric-field strength EE:

E=mgqE = \frac{mg}{q}

Substitute the given numerical values:

E=(3.20×10−14 kg)⋅(9.80 m/s2)8.01×10−19 CE = \frac{(3.20 \times 10^{-14}\text{ kg}) \cdot (9.80\text{ m/s}^2)}{8.01 \times 10^{-19}\text{ C}}

Evaluate the numerator and denominator:

mg=3.136×10−13 Nmg = 3.136 \times 10^{-13}\text{ N}

E=3.136×10−13 N8.01×10−19 C≈3.9151×105 N/CE = \frac{3.136 \times 10^{-13}\text{ N}}{8.01 \times 10^{-19}\text{ C}} \approx 3.9151 \times 10^5\text{ N/C}

Rounding to three significant figures:

E=3.92×105 N/CE = 3.92 \times 10^5\text{ N/C}

(Note: The plate separation d=1.60 cmd = 1.60\text{ cm} is extra information not needed to find the field strength EE, though it would be used if calculating the potential difference V=E⋅dV = E \cdot d.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the electric field strength with potential difference by unnecessarily multiplying the required field by the plate separation distance d.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    q∗E=m∗gq * E = m * g

  2. Step 2

    q=5∗1.602×10−19 C=8.01×10−19 Cq = 5 * 1.602 \times 10^{-19}\text{ C} = 8.01 \times 10^{-19}\text{ C}

  3. Step 3

    E=(m∗g∗d)qE = \frac{(m * g * d)}{q}

    Correct

    E=mgqE = \frac{mg}{q}

    Dividing both sides of qE=mgqE = mg by qq gives E=mgqE = \frac{mg}{q}. You introduced the plate separation distance dd into the numerator, which defines the potential difference ΔV=E⋅d=mgdq\Delta V = E \cdot d = \frac{mgd}{q} rather than the electric field strength EE.

  4. Step 4

    E=(3.20×10−14∗9.80∗0.0160)(8.01×10−19)E = \frac{(3.20 \times 10^{-14} * 9.80 * 0.0160)}{(8.01 \times 10^{-19})}

    Correct

    E=(3.20×10−14 kg)⋅(9.80 m/s2)8.01×10−19 CE = \frac{(3.20 \times 10^{-14}\text{ kg}) \cdot (9.80\text{ m/s}^2)}{8.01 \times 10^{-19}\text{ C}}

    You substituted the numerical values accurately according to your formula from Step 3, but the calculation inherits the extraneous distance term d=0.0160 md = 0.0160\text{ m}.

  5. Step 5

    E=6.26×103 V/mE = 6.26 \times 10^3\text{ V/m}

    Correct

    E≈3.92×105 N/CE \approx 3.92 \times 10^5\text{ N/C}

    Your final numerical value is affected by the incorrect formula in Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly established the equilibrium condition by equating the electric force magnitude to the gravitational force magnitude.

You accurately determined the total net charge from the number of excess electrons.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula confusion between electric field and potential difference

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated electric-field strength EE with the electric potential difference between the plates ΔV=Ed\Delta V = Ed, treating the plate distance dd as a required variable rather than distractor information.

REASONING PATH
Your ACEpath teacher’s suggested approach
Distinguish Electric Field from Potential Difference
  • Electric field EE relates directly to force via Fe=qEF_e = qE, while electric potential difference relates to field across distance via ΔV=Ed\Delta V = Ed.

  • Check the requested quantity before incorporating given geometric variables: if solving for force balance, use E=FqE = \frac{F}{q} directly without introducing plate distance dd.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Isolate EE directly from the equilibrium equation qE=mgqE = mg by dividing both sides by qq: E=mgqE = \frac{mg}{q}.

  2. Substitute the known values without the distance term: E=(3.20×10−14 kg)(9.80 m/s2)8.01×10−19 C=3.136×10−13 N8.01×10−19 CE = \frac{(3.20 \times 10^{-14}\text{ kg})(9.80\text{ m/s}^2)}{8.01 \times 10^{-19}\text{ C}} = \frac{3.136 \times 10^{-13}\text{ N}}{8.01 \times 10^{-19}\text{ C}}.

  3. Evaluate the quotient to three significant figures: E≈3.92×105 N/CE \approx 3.92 \times 10^5\text{ N/C}.

Final answer

E=3.92×105 N/CE = 3.92 \times 10^5\text{ N/C}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between electric force (Fe=qEF_e = qE), electric field (EE), and electric potential difference (ΔV=Ed\Delta V = Ed).

  • Practice identifying superfluous or distractor parameters (like plate separation dd) when solving equilibrium problems that only involve forces.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to multiply the elementary charge by the number of excess electrons, using q = e instead of q = 5e.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    q⋅E=m⋅gq \cdot E = m \cdot g

  2. Step 2

    q=1.602×10−19 Cq = 1.602 \times 10^{-19}\text{ C}

    Correct

    q=n⋅e=5⋅(1.602×10−19 C)=8.01×10−19 Cq = n \cdot e = 5 \cdot (1.602 \times 10^{-19}\text{ C}) = 8.01 \times 10^{-19}\text{ C}

    The problem states that the droplet carries an excess of 55 electrons. You need to multiply the elementary charge ee by n=5n = 5 to find the total net charge qq.

  3. Step 3

    E=m⋅gqE = \frac{m \cdot g}{q}

  4. Step 4

    E=(3.20×10−14⋅9.80)(1.602×10−19)E = \frac{(3.20 \times 10^{-14} \cdot 9.80)}{(1.602 \times 10^{-19})}

    Correct

    E=(3.20×10−14 kg)(9.80 m/s2)8.01×10−19 CE = \frac{(3.20 \times 10^{-14}\text{ kg})(9.80\text{ m/s}^2)}{8.01 \times 10^{-19}\text{ C}}

    Your substitution is consistent with your earlier steps, but it carries forward the single-electron charge value from step 2.

  5. Step 5

    E=1.96×106 V/mE = 1.96 \times 10^6\text{ V/m}

    Correct

    E=3.92×105 N/CE = 3.92 \times 10^5\text{ N/C}

    Your arithmetic was accurate based on your substituted numbers, but the final numerical value is off by a factor of 55 due to the charge calculation in step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that mechanical equilibrium requires balancing the gravitational force and the electric force.

You correctly isolated the electric-field strength variable EE before calculating.

You carried out the numerical arithmetic accurately and stated valid units for the electric field.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing integer multiplier in charge quantization

You equated the total charge qq to the elementary charge ee, forgetting to multiply by the given number of excess electrons (n=5n = 5).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking charge quantization (q=neq = ne) when an object carries multiple excess fundamental charges.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check total charge quantization
  • Macroscopic net charge is quantized as q=neq = n e, where nn is the integer number of excess or missing elementary charges.

  • Always scan the problem text for the number of excess electrons or protons and compute q=n⋅eq = n \cdot e before substituting into force formulas.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the net charge using q=n⋅e=5×(1.602×10−19 C)=8.01×10−19 Cq = n \cdot e = 5 \times (1.602 \times 10^{-19}\text{ C}) = 8.01 \times 10^{-19}\text{ C}.

  2. Substitute m=3.20×10−14 kgm = 3.20 \times 10^{-14}\text{ kg}, g=9.80 m/s2g = 9.80\text{ m/s}^2, and q=8.01×10−19 Cq = 8.01 \times 10^{-19}\text{ C} into E=mgqE = \frac{mg}{q}:

  3. E=(3.20×10−14 kg)(9.80 m/s2)8.01×10−19 C=3.136×10−13 N8.01×10−19 C≈3.9151×105 N/CE = \frac{(3.20 \times 10^{-14}\text{ kg})(9.80\text{ m/s}^2)}{8.01 \times 10^{-19}\text{ C}} = \frac{3.136 \times 10^{-13}\text{ N}}{8.01 \times 10^{-19}\text{ C}} \approx 3.9151 \times 10^5\text{ N/C}.

Final answer

E=3.92×105 N/CE = 3.92 \times 10^5\text{ N/C} (or 3.92×105 V/m3.92 \times 10^5\text{ V/m})

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the quantization of charge formula q=neq = n e and highlight the integer count whenever a problem mentions excess electrons.

  • Practice identifying distractor values versus necessary parameters, such as recognizing that plate separation dd is only needed if finding potential difference.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to include the acceleration due to gravity, equating the electric force directly to mass rather than weight.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    q∗E=mq * E = m

    Correct

    qE=mgqE = mg

    You equated the electric force Fe=qEF_e = qE directly to mass mm instead of the gravitational force (weight) Fg=mgF_g = mg. Force must be balanced by force, so the equilibrium condition is qE=mgqE = mg.

  2. Step 2

    q=5∗1.602×10−19 C=8.01×10−19 Cq = 5 * 1.602 \times 10^{-19}\text{ C} = 8.01 \times 10^{-19}\text{ C}

  3. Step 3

    E=mq  ⟹  E=3.20×10−148.01×10−19E = \frac{m}{q} \implies E = \frac{3.20 \times 10^{-14}}{8.01 \times 10^{-19}}

    Correct

    E=mgq=(3.20×10−14 kg)(9.80 m/s2)8.01×10−19 CE = \frac{mg}{q} = \frac{(3.20 \times 10^{-14}\text{ kg})(9.80\text{ m/s}^2)}{8.01 \times 10^{-19}\text{ C}}

    You substituted your values consistently into the formula you derived, but the expression was missing the factor of gg from Step 1.

  4. Step 4

    E=4.00×104 V/mE = 4.00 \times 10^4\text{ V/m}

    Correct

    E=3.92×105 N/CE = 3.92 \times 10^5\text{ N/C}

    Your final numerical calculation followed directly from your previous equation, but the missing factor of g=9.80 m/s2g = 9.80\text{ m/s}^2 caused your result to be too small by roughly a factor of 1010.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly computed the total charge on the droplet from the elementary charge and number of electrons.

You recognized that the electric force is given by Fe=qEF_e = qE.

You performed accurate algebraic rearrangement and scientific-notation division.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equating Force to Mass Instead of Weight

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused mass (mm) with weight/gravitational force (Fg=mgF_g = mg) when setting up the mechanical equilibrium equation, leading to dimensional inconsistency between force (newtons) and mass (kilograms).

REASONING PATH
Your ACEpath teacher’s suggested approach
Balancing Forces in Equilibrium
  • For mechanical equilibrium, net force must be zero: ∑Fy=Fe−Fg=0  ⟹  qE=mg\sum F_y = F_e - F_g = 0 \implies qE = mg.

  • Always verify that every term in an equilibrium equation has units of force (newtons), never equating force directly to mass.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the vertical force balance: Fe=Fg  ⟹  qE=mgF_e = F_g \implies qE = mg.

  2. Solve for the electric field strength: E=mgqE = \frac{mg}{q}.

  3. Substitute the values: E=(3.20×10−14 kg)(9.80 m/s2)8.01×10−19 C=3.136×10−13 N8.01×10−19 CE = \frac{(3.20 \times 10^{-14}\text{ kg})(9.80\text{ m/s}^2)}{8.01 \times 10^{-19}\text{ C}} = \frac{3.136 \times 10^{-13}\text{ N}}{8.01 \times 10^{-19}\text{ C}}.

  4. Evaluate to three significant figures: E≈3.92×105 N/CE \approx 3.92 \times 10^5\text{ N/C} (or V/m\text{V/m}).

Final answer

E=3.92×105 N/CE = 3.92 \times 10^5\text{ N/C}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write Newton's second law ∑F=0\sum F = 0 explicitly before substituting formulas for individual forces.

  • Check unit dimensions: confirm that both sides of an equilibrium equation evaluate to newtons (N=kg⋅m/s2\text{N} = \text{kg}\cdot\text{m/s}^2).

Lock it in

Similar question

01

A charged sphere of mass m=4.00×10−15 kgm = 4.00 \times 10^{-15}\text{ kg} is suspended at rest in Earth's gravity (g=9.80 m/s2g = 9.80\text{ m/s}^2) between two horizontal plates spaced 2.00 cm2.00\text{ cm} apart. If the sphere carries a net charge of q=3.20×10−19 Cq = 3.20 \times 10^{-19}\text{ C}, calculate the required electric-field strength EE.

Answer

E=1.23×105 N/CE = 1.23 \times 10^5\text{ N/C}. Key step: equate qE=mgqE = mg, so E=mgq=(4.00×10−15)(9.80)3.20×10−19=1.225×105 N/CE = \frac{mg}{q} = \frac{(4.00 \times 10^{-15})(9.80)}{3.20 \times 10^{-19}} = 1.225 \times 10^5\text{ N/C}.

02

An oil drop of mass m=1.60×10−14 kgm = 1.60 \times 10^{-14}\text{ kg} with an excess of 44 electrons (e=1.602×10−19 Ce = 1.602 \times 10^{-19}\text{ C}) is balanced between two horizontal parallel plates separated by d=1.20 cmd = 1.20\text{ cm}. Find both the electric-field strength EE and the electric potential difference ΔV\Delta V applied across the plates. Use g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer

E=2.45×105 N/CE = 2.45 \times 10^5\text{ N/C}, ΔV=2.94×103 V\Delta V = 2.94 \times 10^3\text{ V}. Key steps: q=4(1.602×10−19 C)=6.408×10−19 Cq = 4(1.602 \times 10^{-19}\text{ C}) = 6.408 \times 10^{-19}\text{ C}. Then E=mgq=(1.60×10−14)(9.80)6.408×10−19≈2.447×105 N/CE = \frac{mg}{q} = \frac{(1.60 \times 10^{-14})(9.80)}{6.408 \times 10^{-19}} \approx 2.447 \times 10^5\text{ N/C}. Finally, ΔV=E⋅d=(2.447×105)(0.0120)≈2.94×103 V\Delta V = E \cdot d = (2.447 \times 10^5)(0.0120) \approx 2.94 \times 10^3\text{ V}.

03

A plastic bead of mass m=2.50×10−6 kgm = 2.50 \times 10^{-6}\text{ kg} carrying a positive charge q=+5.00×10−9 Cq = +5.00 \times 10^{-9}\text{ C} enters a region between two horizontal parallel plates separated by d=2.50 cmd = 2.50\text{ cm}. An upward electric field of magnitude E=8.00×103 N/CE = 8.00 \times 10^3\text{ N/C} exists between the plates. Determine the vertical acceleration aya_y of the bead, taking upward as positive. Use g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer

ay=+6.20 m/s2a_y = +6.20\text{ m/s}^2. Key steps: upward electric force is Fe=qE=(5.00×10−9)(8.00×103)=4.00×10−5 NF_e = qE = (5.00 \times 10^{-9})(8.00 \times 10^3) = 4.00 \times 10^{-5}\text{ N}; downward gravity is Fg=mg=(2.50×10−6)(9.80)=2.45×10−5 NF_g = mg = (2.50 \times 10^{-6})(9.80) = 2.45 \times 10^{-5}\text{ N}. Net vertical force is ΣFy=Fe−Fg=1.55×10−5 N\Sigma F_y = F_e - F_g = 1.55 \times 10^{-5}\text{ N}. Acceleration ay=ΣFym=1.55×10−52.50×10−6=6.20 m/s2a_y = \frac{\Sigma F_y}{m} = \frac{1.55 \times 10^{-5}}{2.50 \times 10^{-6}} = 6.20\text{ m/s}^2.

Loading workspace…