Resources

An engineering crash test records that a 1200 kg1200\text{ kg} vehicle moving horizontally at an initial speed viv_i is brought completely to rest (vf=0v_f = 0) by a stationary safety barrier over a time duration of Δt=0.160 s\Delta t = 0.160\text{ s}. The instrumentation measures an average net horizontal stopping force of magnitude Favg=1.35×105 NF_{\text{avg}} = 1.35\times 10^5\text{ N} directed opposite to the motion. Identify the applicable physical law relating force, duration, and change in linear momentum, write the vector/scalar relation, and back-calculate the initial speed viv_i of the vehicle before impact.

Answer and steps

Final answer

Impulse-Momentum Theorem; J⃗=F⃗avgΔt=Δp⃗=mv⃗f−mv⃗i\vec{J} = \vec{F}_{\text{avg}}\Delta t = \Delta \vec{p} = m\vec{v}_f - m\vec{v}_i; vi=18.0 m/sv_i = 18.0\text{ m/s}.

Steps

01

Identify the Applicable Physical Law

The problem involves an average net force acting over a finite time interval to change an object's velocity (and thus its momentum). The fundamental principle connecting these quantities is Newton's second law written in terms of momentum, commonly known as the Impulse-Momentum Theorem.

02

Formulate the Governing Relation

The impulse J⃗\vec{J} exerted by an average net force F⃗avg\vec{F}_{\text{avg}} over a time interval Δt\Delta t equals the vehicle's change in linear momentum Δp⃗\Delta \vec{p}:

J⃗=F⃗avgΔt=Δp⃗=mv⃗f−mv⃗i\vec{J} = \vec{F}_{\text{avg}} \Delta t = \Delta \vec{p} = m\vec{v}_f - m\vec{v}_i

Taking the vehicle's direction of initial motion as positive (+x+x):

  • Initial velocity: v⃗i=+vii^\vec{v}_i = +v_i \hat{i}
  • Final velocity: v⃗f=0\vec{v}_f = 0
  • Average stopping force: F⃗avg=−Favgi^\vec{F}_{\text{avg}} = -F_{\text{avg}} \hat{i} (since it opposes the motion)

Substituting these components along the horizontal axis:

−FavgΔt=0−mvi=−mvi-F_{\text{avg}} \Delta t = 0 - m v_i = -m v_i

Equating the magnitudes directly gives the scalar relation:

FavgΔt=mviF_{\text{avg}} \Delta t = m v_i

Common Pitfall: Forgetting that force and momentum are vector quantities. When setting up scalar signs, ensure that the opposing force correctly matches the negative change in velocity (Δv=0−vi=−vi\Delta v = 0 - v_i = -v_i), avoiding negative signs under magnitudes.


03

Calculate the Initial Speed viv_i

Rearrange the scalar formula to solve for the initial speed viv_i:

vi=FavgΔtmv_i = \frac{F_{\text{avg}} \Delta t}{m}

Substitute the given numerical values:

  • m=1200 kgm = 1200\text{ kg}
  • Δt=0.160 s\Delta t = 0.160\text{ s}
  • Favg=1.35×105 NF_{\text{avg}} = 1.35 \times 10^5\text{ N}

vi=(1.35×105 N)(0.160 s)1200 kgv_i = \frac{(1.35 \times 10^5\text{ N})(0.160\text{ s})}{1200\text{ kg}}

vi=21600 N⋅s1200 kg=18.0 m/sv_i = \frac{21600\text{ N}\cdot\text{s}}{1200\text{ kg}} = 18.0\text{ m/s}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the impulse-momentum theorem (relating force and time to momentum change) with the work-energy principle, mistakenly equating the product F * Δt to kinetic energy 1/2 * m * v_i².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Impulse - momentum theorem :

  2. Step 2

    Favg∗Δt=(1/2)∗m∗vi2F_{\text{avg}} * \Delta t = (1/2) * m * v_i^2

    Correct

    FavgΔt=mviF_{\text{avg}}\Delta t = m v_i

    Impulse equals change in linear momentum (Δp=mvi\Delta p = m v_i), not kinetic energy. The quantity 12mvi2\frac{1}{2}mv_i^2 is related to work done over a distance (FdF d), not impulse over a time duration (FΔtF \Delta t).

  3. Step 3

    1.35∗105∗0.160=(1/2)∗1200∗vi2  ⟹  21600=600∗vi21.35 * 10^5 * 0.160 = (1/2) * 1200 * v_i^2 \implies 21600 = 600 * v_i^2

    Correct

    (1.35×105)(0.160)=1200vi  ⟹  21600=1200vi(1.35 \times 10^5)(0.160) = 1200 v_i \implies 21600 = 1200 v_i

    You substituted the numerical values accurately into your equation, but the setup itself contained the kinetic energy formula instead of momentum.

  4. Step 4

    vi2=36  ⟹  vi=6.0 m/sv_i^2 = 36 \implies v_i = 6.0\text{ m/s}

    Correct

    vi=216001200=18.0 m/sv_i = \frac{21600}{1200} = 18.0\text{ m/s}

    Your final calculation directly follows from your previous equation, but it leads to an incorrect numerical speed due to the formula mismatch in Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the Impulse-Momentum Theorem as the applicable physical principle.

You accurately substituted the given values and performed valid algebraic simplifications on your equation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula/definition confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing impulse (force accumulated over time, causing a change in linear momentum mΔvm\Delta v) with mechanical work (force accumulated over displacement, causing a change in kinetic energy 12mΔ(v2)\frac{1}{2}m\Delta(v^2)).

REASONING PATH
Your ACEpath teacher’s suggested approach
Pairing Force and Domain
  • Force acting over time (FΔtF \Delta t) changes momentum (mvm v). Force acting over distance (FdF d) changes kinetic energy (12mv2\frac{1}{2}mv^2).

  • Whenever a problem specifies duration Δt\Delta t, write J⃗=F⃗Δt=Δp⃗=mΔv⃗\vec{J} = \vec{F}\Delta t = \Delta \vec{p} = m\Delta \vec{v}. Only use 12mv2\frac{1}{2}mv^2 when working with displacement Δx\Delta x and work.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute the given mass, force, and duration: (1.35×105 N)(0.160 s)=(1200 kg)vi(1.35 \times 10^5\text{ N})(0.160\text{ s}) = (1200\text{ kg}) v_i

  2. Multiply to find the impulse: 21600 N⋅s=(1200 kg)vi21600\text{ N}\cdot\text{s} = (1200\text{ kg}) v_i

  3. Solve linearly for viv_i: vi=21600 N⋅s1200 kg=18.0 m/sv_i = \frac{21600\text{ N}\cdot\text{s}}{1200\text{ kg}} = 18.0\text{ m/s}

Final answer

vi=18.0 m/sv_i = 18.0\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between the Impulse-Momentum Theorem (J=ΔpJ = \Delta p) and the Work-Energy Theorem (W=ΔKW = \Delta K).

  • Check units whenever writing a physics relation: [extN⋅s]=[kg⋅m/s][ ext{N}\cdot\text{s}] = [\text{kg}\cdot\text{m/s}], whereas [J]=[N⋅m]=[kg⋅m2/s2][\text{J}] = [\text{N}\cdot\text{m}] = [\text{kg}\cdot\text{m}^2/\text{s}^2].

OverviewACEpath Teacher's Diagnosis

02 The student forgets to multiply force by time interval when setting up impulse, mistakenly equating force directly to momentum (F = m * v_i) instead of rate of change of momentum.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Newton's second law: Favg=m∗viF_{\text{avg}} = m * v_i

    Correct

    Impulse-Momentum Theorem: FavgΔt=mviF_{\text{avg}} \Delta t = m v_i (from F⃗avgΔt=Δp⃗\vec{F}_{\text{avg}} \Delta t = \Delta \vec{p})

    Force has units of N=kg⋅m/s2\text{N} = \text{kg}\cdot\text{m}/\text{s}^2, whereas momentum has units of kg⋅m/s\text{kg}\cdot\text{m}/\text{s}. Force is the rate of change of momentum, so you must multiply force by the collision duration Δt\Delta t to obtain the impulse that changes the momentum.

  2. Step 2

    vi=Favgm  ⟹  vi=1.35∗1051200v_i = \frac{F_{\text{avg}}}{m} \implies v_i = \frac{1.35 * 10^5}{1200}

    Correct

    vi=FavgΔtm=(1.35×105)(0.160)1200v_i = \frac{F_{\text{avg}} \Delta t}{m} = \frac{(1.35 \times 10^5)(0.160)}{1200}

    This rearrangement and substitution followed logically from your formula in Step 1, but it is affected by the missing time factor Δt=0.160 s\Delta t = 0.160\text{ s}.

  3. Step 3

    vi=112.5 m/sv_i = 112.5\text{ m/s}

    Correct

    vi=18.0 m/sv_i = 18.0\text{ m/s}

    Your arithmetic division was accurate, but the calculated value of 112.5 m/s112.5\text{ m/s} carries over the missing Δt\Delta t factor.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly extracted the numerical values for mass and stopping force from the problem.

You correctly recognized that the stopping force is tied to the motion of the vehicle.

You performed the algebraic isolation and numerical division with precision.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Dimensional mismatch: equating force directly to momentum

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated force as equal to momentum rather than the time rate of change of momentum, omitting the collision duration Δt\Delta t required by the Impulse-Momentum Theorem.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Consistency Check
  • Force ([N]=[kg⋅m/s2][\text{N}] = [\text{kg}\cdot\text{m}/\text{s}^2]) cannot equal momentum ([kg⋅m/s][\text{kg}\cdot\text{m}/\text{s}]).

  • Always verify that both sides of your governing equation share identical physical dimensions before rearranging.

Impulse Formulation
  • Impulse is force accumulated over time: J⃗=F⃗avgΔt=Δp⃗\vec{J} = \vec{F}_{\text{avg}} \Delta t = \Delta \vec{p}.

  • When a problem provides an interaction duration Δt\Delta t alongside force and velocity changes, apply the Impulse-Momentum Theorem.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the Impulse-Momentum Theorem: FavgΔt=Δp=mvi−0=mviF_{\text{avg}} \Delta t = \Delta p = m v_i - 0 = m v_i.

  2. Isolate the initial velocity: vi=FavgΔtmv_i = \frac{F_{\text{avg}} \Delta t}{m}.

  3. Substitute the given quantities: vi=(1.35×105 N)(0.160 s)1200 kg=21600 N⋅s1200 kgv_i = \frac{(1.35 \times 10^5\text{ N})(0.160\text{ s})}{1200\text{ kg}} = \frac{21600\text{ N}\cdot\text{s}}{1200\text{ kg}}.

Final answer

vi=18.0 m/sv_i = 18.0\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between Newton's second law in acceleration form (F=maF = ma) and momentum form (F=ΔpΔtF = \frac{\Delta p}{\Delta t}).

  • Practice checking physical units whenever you equate dynamic quantities like force, energy, and momentum.

  • Complete the three targeted practice exercises below to build fluency with impulse and stopping time.

OverviewACEpath Teacher's Diagnosis

03 The student inverts the relationship when isolating initial velocity, dividing mass by impulse instead of dividing impulse by mass.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Impulse-momentum theorem: Favg⋅Δt=m⋅vi\text{Impulse-momentum theorem: } F_{\text{avg}} \cdot \Delta t = m \cdot v_i

  2. Step 2

    vi=mFavg⋅Δtv_i = \frac{m}{F_{\text{avg}} \cdot \Delta t}

    Correct

    vi=FavgΔtmv_i = \frac{F_{\text{avg}}\Delta t}{m}

    To isolate viv_i from FavgΔt=mviF_{\text{avg}}\Delta t = m v_i, you must divide both sides by mm, which yields vi=FavgΔtmv_i = \frac{F_{\text{avg}}\Delta t}{m} rather than dividing mm by the impulse.

  3. Step 3

    vi=12001.35×105×0.160  ⟹  vi=120021600v_i = \frac{1200}{1.35 \times 10^5 \times 0.160} \implies v_i = \frac{1200}{21600}

    Correct

    vi=(1.35×105 N)(0.160 s)1200 kg=21600 N⋅s1200 kgv_i = \frac{(1.35 \times 10^5\text{ N})(0.160\text{ s})}{1200\text{ kg}} = \frac{21600\text{ N}\cdot\text{s}}{1200\text{ kg}}

    You substituted the values correctly into your inverted formula and correctly computed the denominator as 2160021600, but the calculation was affected by the rearranged formula.

  4. Step 4

    vi=0.056 m/sv_i = 0.056\text{ m/s}

    Correct

    vi=18.0 m/sv_i = 18.0\text{ m/s}

    Your final quotient 120021600≈0.056 m/s\frac{1200}{21600} \approx 0.056\text{ m/s} followed your prior inverted setup, whereas the true initial speed is 216001200=18.0 m/s\frac{21600}{1200} = 18.0\text{ m/s}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly selected the impulse-momentum theorem as the governing physical law.

You accurately formulated the relationship between the impulse magnitude and linear momentum change as FavgΔt=mviF_{\text{avg}} \Delta t = m v_i.

You carried out the arithmetic evaluation of 1.35×105×0.160=216001.35 \times 10^5 \times 0.160 = 21600 accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Variable isolation error

You accidentally divided mass by impulse rather than impulse by mass when isolating viv_i.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

In an equation of the form A=B⋅CA = B \cdot C, isolating CC requires dividing both sides by the coefficient BB, resulting in C=ABC = \frac{A}{B}. Inverting this operation to C=BAC = \frac{B}{A} disrupts dimensional consistency and produces the reciprocal of the intended quantity.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Division Symmetry
  • If X=Y⋅ZX = Y \cdot Z, dividing both sides by YY yields Z=XYZ = \frac{X}{Y}.

  • Circle the unknown variable you want to isolate and divide both sides by whatever is multiplied directly by that variable.

Dimensional Unit Check
  • ImpulseMass=N⋅skg=kg⋅(m/s2)⋅skg=m/s\frac{\text{Impulse}}{\text{Mass}} = \frac{\text{N}\cdot\text{s}}{\text{kg}} = \frac{\text{kg}\cdot(\text{m/s}^2)\cdot\text{s}}{\text{kg}} = \text{m/s}.

  • Verify units before plugging in numbers: dividing mass by impulse yields s/m\text{s/m}, which signals an inverted fraction.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Divide both sides of FavgΔt=mviF_{\text{avg}}\Delta t = m v_i by mm: vi=FavgΔtmv_i = \frac{F_{\text{avg}}\Delta t}{m}.

  2. Substitute the given numerical quantities: vi=(1.35×105 N)(0.160 s)1200 kgv_i = \frac{(1.35 \times 10^5\text{ N})(0.160\text{ s})}{1200\text{ kg}}.

  3. Compute the numerator: (1.35×105)(0.160)=21600 N⋅s(1.35 \times 10^5)(0.160) = 21600\text{ N}\cdot\text{s}.

  4. Evaluate the final quotient: vi=216001200=18.0 m/sv_i = \frac{21600}{1200} = 18.0\text{ m/s}.

Final answer

vi=18.0 m/sv_i = 18.0\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Perform a quick dimensional sanity check whenever you rearrange a physics formula to ensure the units match the target variable.

  • Practice isolating variables symbolically and explicitly showing the step where you divide both sides by the coefficient.

Lock it in

Similar question

01

A 0.15 kg0.15\text{ kg} baseball moving horizontally at 40 m/s40\text{ m/s} is struck by a bat and reversed in direction to 50 m/s50\text{ m/s}. The collision lasts Δt=1.2×10−3 s\Delta t = 1.2\times 10^{-3}\text{ s}. Find the magnitude of the average force exerted on the ball.

Answer

Favg=1.125×104 NF_{\text{avg}} = 1.125\times 10^4\text{ N}. Key step: Δp=m(vf−vi)=0.15[50−(−40)]=13.5 kg⋅m/s\Delta p = m(v_f - v_i) = 0.15[50 - (-40)] = 13.5\text{ kg}\cdot\text{m/s}; then Favg=ΔpΔt=13.51.2×10−3=11250 NF_{\text{avg}} = \frac{\Delta p}{\Delta t} = \frac{13.5}{1.2\times 10^{-3}} = 11250\text{ N}.

02

A 1500 kg1500\text{ kg} car traveling at 20 m/s20\text{ m/s} hits a snowbank that exerts an average stopping force of 6000 N6000\text{ N}. How long does it take for the car to come to a complete stop, and through what distance does it travel during braking?

Answer

Time: t=5.0 st = 5.0\text{ s}; Distance: d=50 md = 50\text{ m}. Key steps: (1) Impulse gives Δt=mviF=1500×206000=5.0 s\Delta t = \frac{m v_i}{F} = \frac{1500 \times 20}{6000} = 5.0\text{ s}. (2) Work-energy gives d=12mvi2F=0.5×1500×4006000=50 md = \frac{\frac{1}{2} m v_i^2}{F} = \frac{0.5 \times 1500 \times 400}{6000} = 50\text{ m}.

03

A 2.0 kg2.0\text{ kg} block initially at rest on a frictionless horizontal plane is acted upon by a net horizontal force F(t)=6t NF(t) = 6t\text{ N} from t=0t = 0 to t=3.0 st = 3.0\text{ s}. Calculate the final speed of the block using momentum principles, and verify that the final kinetic energy matches the work done by the force.

Answer

vf=13.5 m/sv_f = 13.5\text{ m/s}. Key steps: (1) Impulse J=∫036t dt=[3t2]03=27 N⋅sJ = \int_0^3 6t\,dt = [3t^2]_0^3 = 27\text{ N}\cdot\text{s}. (2) vf=Jm=272.0=13.5 m/sv_f = \frac{J}{m} = \frac{27}{2.0} = 13.5\text{ m/s}. (3) Acceleration a(t)=3ta(t) = 3t, so v(t)=1.5t2v(t) = 1.5t^2 and x(t)=0.5t3x(t) = 0.5t^3. At t=3 st=3\text{ s}, W=∫F dx=∫03(6t)(1.5t2) dt=[2.25t4]03=182.25 JW = \int F\,dx = \int_0^3 (6t)(1.5t^2)\,dt = [2.25t^4]_0^3 = 182.25\text{ J}, matching Kf=12(2.0)(13.5)2=182.25 JK_f = \frac{1}{2}(2.0)(13.5)^2 = 182.25\text{ J}.

Loading workspace…