Resources

A centrifuge rotor spins clockwise at an angular speed of ω=4800 rpm\omega = 4800\text{ rpm}. A microcentrifuge sample tube is positioned at a radial distance of r=125 mmr = 125\text{ mm} from the central rotation axis. Setting up a Cartesian coordinate system centered on the rotation axis such that at the instant of interest the sample tube is at coordinates (x,y)=(0 mm,−125 mm)(x, y) = (0\text{ mm}, -125\text{ mm}): (a) Convert ω\omega to radians per second and find the linear speed vv in meters per second (m/s\text{m/s}). (b) State the exact unit-vector direction and determine the full velocity vector v⃗\vec{v} of the sample in m/s\text{m/s}.

Answer and steps

Final answer

(a) ω=503 rad/s\omega = 503\text{ rad/s} (160π rad/s160\pi\text{ rad/s}), v=62.8 m/sv = 62.8\text{ m/s} (20π m/s20\pi\text{ m/s}); (b) Directed along −i^-\hat{i} (due west, tangent to the circle); v⃗=−62.8i^ m/s\vec{v} = -62.8\hat{i}\text{ m/s} (or −62.8i^+0j^ m/s-62.8\hat{i} + 0\hat{j}\text{ m/s}).

Steps

Part (a): Angular Speed in Radians per Second and Linear Speed

  1. Convert angular speed from rpm to rad/s\text{rad/s}: One full revolution equals 2π radians2\pi\text{ radians}, and one minute equals 60 seconds60\text{ seconds}: ω=4800 rpm×2π rad1 rev×1 min60 s=4800⋅2π60 rad/s=160π rad/s≈503 rad/s\omega = 4800\text{ rpm} \times \frac{2\pi\text{ rad}}{1\text{ rev}} \times \frac{1\text{ min}}{60\text{ s}} = \frac{4800 \cdot 2\pi}{60}\text{ rad/s} = 160\pi\text{ rad/s} \approx 503\text{ rad/s}
  2. Calculate linear speed vv: First, convert the radial distance into meters: r=125 mm=0.125 mr = 125\text{ mm} = 0.125\text{ m} The relationship between linear speed and angular speed for circular motion is v=ωrv = \omega r: v=(160π rad/s)⋅(0.125 m)=20π m/s≈62.8 m/sv = (160\pi\text{ rad/s}) \cdot (0.125\text{ m}) = 20\pi\text{ m/s} \approx 62.8\text{ m/s}

Part (b): Direction and Velocity Vector v⃗\vec{v}

  1. Determine the direction of the velocity vector:

    • In uniform circular motion, the velocity vector is always perpendicular to the position vector (tangent to the circular path) in the direction of rotation.
    • The tube is located at (0,−125 mm)(0, -125\text{ mm}), which lies directly below the origin on the negative yy-axis.
    • Following a clockwise trajectory, an object at the lowest point of its circular path travels horizontally to the left (toward the negative xx-direction).
    • Therefore, the unit-vector direction is −i^-\hat{i} (due west).

    Pitfall to avoid: Do not confuse clockwise and counterclockwise directions. A counterclockwise motion at the bottom of the circle would point right (+i^+\hat{i}), but clockwise motion points left (−i^-\hat{i}).

  2. Write the complete velocity vector: Combining the magnitude vv and the unit vector −i^-\hat{i}: v⃗=v(−i^)=−62.8i^ m/s(or −62.8i^+0j^ m/s)\vec{v} = v(-\hat{i}) = -62.8\hat{i}\text{ m/s}\quad \text{(or } -62.8\hat{i} + 0\hat{j}\text{ m/s}\text{)}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses clockwise rotation with standard counterclockwise angular velocity, assigning a positive tangential direction (+i) along the bottom of the circle.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ω=4800×2π60=160π rad/s≈502.65 rad/s\omega = \frac{4800 \times 2\pi}{60} = 160\pi\text{ rad/s} \approx 502.65\text{ rad/s}

  2. Step 2

    r=0.125 m  ⟹  v=rω=0.125×160π=20π m/s≈62.83 m/sr = 0.125\text{ m} \implies v = r\omega = 0.125 \times 160\pi = 20\pi\text{ m/s} \approx 62.83\text{ m/s}

  3. Step 3

    At (0,−125 mm), tangent points in +x direction  ⟹  Unit vector=+i^\text{At } (0, -125\text{ mm})\text{, tangent points in } +x \text{ direction} \implies \text{Unit vector} = +\hat{i}

    Correct

    Unit vector=−i^\text{Unit vector} = -\hat{i}

    At the bottom of the circular trajectory (0,−125 mm)(0, -125\text{ mm}), a clockwise rotation carries the object to the left toward the negative xx-direction (−i^-\hat{i}), not to the right (+i^+\hat{i}).

  4. Step 4

    v⃗=20πi^ m/s≈62.83i^ m/s\vec{v} = 20\pi\hat{i}\text{ m/s} \approx 62.83\hat{i}\text{ m/s}

    Correct

    v⃗=−20πi^ m/s≈−62.8i^ m/s\vec{v} = -20\pi\hat{i}\text{ m/s} \approx -62.8\hat{i}\text{ m/s}

    Your vector magnitude is correct, but the sign carries over the incorrect unit-vector direction from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the conversion factor 2π60\frac{2\pi}{60} to change rpm into rad/s\text{rad/s}.

You correctly converted millimeters to meters for the radial distance.

You accurately calculated the magnitude of the tangential speed using v=rωv = r\omega.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Directional sign error in tangential velocity

You visualized the circular motion as counterclockwise (standard polar angle θ\theta direction) instead of clockwise.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

In standard coordinate mathematics, increasing angle θ\theta goes counterclockwise, which points toward +i^+\hat{i} at the lowest point (0,−r)(0, -r). Because the problem explicitly specified clockwise rotation (like the hands of a clock moving from 6 toward 9), the tangential velocity points in the negative xx-direction (−i^-\hat{i}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Clockwise vs. Counterclockwise Tangents
  • At the 6 o'clock position (0,−r)(0, -r), clockwise motion points west (−i^-\hat{i}), while counterclockwise motion points east (+i^+\hat{i}).

  • Sketch a quick circular path with an arrow indicating the specified rotation sense before writing unit vectors.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the position: (x,y)=(0,−0.125 m)(x, y) = (0, -0.125\text{ m}) lies directly below the origin on the negative yy-axis.

  2. Trace the clockwise direction: At the bottom of a clockwise circle, motion heads from (0,−r)(0, -r) toward (−r,0)(-r, 0), which points along the negative xx-axis (−i^-\hat{i}).

  3. Combine magnitude and direction: v⃗=v(−i^)=−20πi^ m/s≈−62.8i^ m/s\vec{v} = v(-\hat{i}) = -20\pi\hat{i}\text{ m/s} \approx -62.8\hat{i}\text{ m/s}.

Final answer

v⃗=−62.8i^ m/s\vec{v} = -62.8\hat{i}\text{ m/s} (directed along −i^-\hat{i})

NEXT STEPS
Final Takeaways from Your Teacher
  • Always sketch a clock face or circle with directional arrows matching the problem's stated rotation direction.

  • Trace the tangent vector directly from the point of interest to verify whether it points along +i^+\hat{i}, −i^-\hat{i}, +j^+\hat{j}, or −j^-\hat{j}.

OverviewACEpath Teacher's Diagnosis

02 The student omits the millimeter-to-meter conversion for the radius, yielding a linear speed that is a factor of 1000 too large.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ω=4800×2π60=160π rad/s≈502.65 rad/s\omega = 4800 \times \frac{2\pi}{60} = 160\pi\text{ rad/s} \approx 502.65\text{ rad/s}

  2. Step 2

    v=rω=125×160π=20000π m/s≈62831.85 m/sv = r\omega = 125 \times 160\pi = 20000\pi\text{ m/s} \approx 62831.85\text{ m/s}

    Correct

    r=125 mm=0.125 m  ⟹  v=rω=(0.125 m)(160π rad/s)=20π m/s≈62.8 m/sr = 125\text{ mm} = 0.125\text{ m} \implies v = r\omega = (0.125\text{ m})(160\pi\text{ rad/s}) = 20\pi\text{ m/s} \approx 62.8\text{ m/s}

    You substituted the radius as 125125 directly into v=rωv = r\omega without converting millimeters to meters (125 mm=0.125 m125\text{ mm} = 0.125\text{ m}). This resulted in a speed of ≈62832 m/s\approx 62832\text{ m/s} instead of ≈62.8 m/s\approx 62.8\text{ m/s}.

  3. Step 3

    At (0,−125 mm), moving clockwise gives direction −i  ⟹  Unit vector=−i\text{At }(0, -125\text{ mm})\text{, moving clockwise gives direction } -i \implies \text{Unit vector} = -i

  4. Step 4

    V_vector=−20000πi m/s≈−62831.85i m/sV\text{\_vector} = -20000\pi i\text{ m/s} \approx -62831.85 i\text{ m/s}

    Correct

    v⃗=−20πi^ m/s≈−62.8i^ m/s\vec{v} = -20\pi\hat{i}\text{ m/s} \approx -62.8\hat{i}\text{ m/s}

    Your vector combination method is correct, but the magnitude is 1,000 times too large due to the millimeter conversion error in Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You converted angular speed from rpm\text{rpm} to rad/s\text{rad/s} with exact and decimal representations.

You used the correct tangential speed formula v=rωv = r\omega.

You correctly deduced the tangential unit vector direction for clockwise motion at (0,−y)(0, -y).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Error

You forgot to convert the radius from mm\text{mm} to m\text{m}, even though you assigned m/s\text{m/s} to the resulting speed.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking unit consistency before substituting values into kinematic formulas: when using v=rωv = r\omega to obtain standard SI units (m/s\text{m/s}), the radius rr must be expressed in standard SI units (meters).

REASONING PATH
Your ACEpath teacher’s suggested approach
Check SI Base Units
  • Linear speed in m/s\text{m/s} requires radius in meters: 1 m=1000 mm1\text{ m} = 1000\text{ mm}.

  • Always convert non-standard prefixes (mm\text{mm}, cm\text{cm}) into base meters before multiplying by ω\omega in rad/s\text{rad/s}.

Sanity Check Real-World Magnitudes
  • Laboratory benchtop centrifuges typically have rim speeds around 50–150 m/s50\text{--}150\text{ m/s}, not hypervelocity scale (>60,000 m/s>60{,}000\text{ m/s}).

  • Pause and evaluate if the calculated numerical value is physically reasonable.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the radius into meters: r=125 mm=0.125 mr = 125\text{ mm} = 0.125\text{ m}.

  2. Calculate linear speed: v=rω=(0.125 m)(160π rad/s)=20π m/s≈62.8 m/sv = r\omega = (0.125\text{ m})(160\pi\text{ rad/s}) = 20\pi\text{ m/s} \approx 62.8\text{ m/s}.

  3. Combine speed with the unit vector −i^-\hat{i}: v⃗=−20πi^ m/s≈−62.8i^ m/s\vec{v} = -20\pi\hat{i}\text{ m/s} \approx -62.8\hat{i}\text{ m/s}.

Final answer

(a) ω=160π rad/s≈503 rad/s\omega = 160\pi\text{ rad/s} \approx 503\text{ rad/s}, v=20π m/s≈62.8 m/sv = 20\pi\text{ m/s} \approx 62.8\text{ m/s}; (b) unit vector is −i^-\hat{i}, v⃗=−62.8i^ m/s\vec{v} = -62.8\hat{i}\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Form the habit of explicitly writing units next to each substituted variable before computing.

  • Practice determining velocity vector components at all four cardinal circle positions for both clockwise and counterclockwise rotations.

OverviewACEpath Teacher's Diagnosis

03 The student confuses the tangential velocity direction with the radial position vector direction, reporting the velocity directed radially outward along -j.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ω=4800×2π60=160π rad/s≈502.65 rad/s  ⟹  r=0.125 m  ⟹  v=rω=0.125×160π=20π m/s≈62.83 m/s\omega = 4800 \times \frac{2\pi}{60} = 160\pi\text{ rad/s} \approx 502.65\text{ rad/s} \implies r = 0.125\text{ m} \implies v = r\omega = 0.125 \times 160\pi = 20\pi\text{ m/s} \approx 62.83\text{ m/s}

  2. Step 2

    At \text{At }(0, -125 mm\text{ mm}), velocity points along position vector in \text{, velocity points along position vector in }-y direction\text{ direction}   ⟹  \implies Unit vector\text{Unit vector} = -j^\hat{j}

    Correct

    Unit vector=−i^\text{Unit vector} = -\hat{i}

    In circular motion, the instantaneous velocity vector is always perpendicular to the radial position vector (tangent to the circle), never parallel to it. At (0,−125 mm)(0, -125\text{ mm}), the sample is at the lowest point of its circular path; following a clockwise direction, motion is directed toward the negative xx-axis (−i^-\hat{i}), not along −j^-\hat{j}.

  3. Step 3

    v⃗=−20πj^ m/s≈−62.83j^ m/s\vec{v} = -20\pi\hat{j}\text{ m/s} \approx -62.83\hat{j}\text{ m/s}

    Correct

    v⃗=−20πi^ m/s≈−62.8i^ m/s\vec{v} = -20\pi\hat{i}\text{ m/s} \approx -62.8\hat{i}\text{ m/s}

    You correctly combined your computed speed with your chosen unit vector, but the final vector has the wrong spatial direction due to the earlier unit vector error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the angular speed from rpm to radians per second.

You accurately converted the radius to meters and computed the linear speed using v=ωrv = \omega r.

You recognized that expressing a vector requires multiplying its magnitude by a directional unit vector.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
radial_vs_tangential_direction_confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the direction of the radial position vector with the direction of the tangential velocity vector. In circular motion, velocity is purely tangential (perpendicular to radius: v⃗⊥r⃗\vec{v} \perp \vec{r}). At the bottom of a circle centered at the origin, a clockwise motion moves horizontally to the left (−i^-\hat{i}), whereas the position vector points straight down (−j^-\hat{j}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Tangential Velocity Principle
  • In circular motion, v⃗\vec{v} is always tangent to the trajectory and perpendicular to the radial position vector r⃗\vec{r} ( v⃗⋅r⃗=0\,\vec{v} \cdot \vec{r} = 0).

  • Draw the circular orbit and sketch the velocity vector tangent to the circle pointing in the direction of rotation (clockwise vs. counterclockwise).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the position vector: at (0,−125 mm)(0, -125\text{ mm}), r⃗=−0.125j^ m\vec{r} = -0.125\hat{j}\text{ m}, pointing downward from the origin.

  2. Determine the tangent line at the bottom of the circle: the tangent is horizontal (along the xx-axis).

  3. Trace clockwise rotation at the bottom point: the trajectory moves from right to left, which corresponds to the negative xx-direction (−i^-\hat{i}).

  4. Multiply the speed v=20π m/s≈62.8 m/sv = 20\pi\text{ m/s} \approx 62.8\text{ m/s} by the unit vector −i^-\hat{i}.

Final answer

v⃗=−62.8i^ m/s\vec{v} = -62.8\hat{i}\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the vector relationship between position r⃗\vec{r}, tangential velocity v⃗\vec{v}, and centripetal acceleration a⃗c\vec{a}_c in circular motion.

  • Practice sketching velocity vectors at the four cardinal points of a circle for both clockwise and counterclockwise rotations.

Lock it in

Similar question

01

A grinding wheel of radius r=0.20 mr = 0.20\text{ m} rotates clockwise at ω=50 rad/s\omega = 50\text{ rad/s} in the xyxy-plane centered at the origin. What is the velocity vector v⃗\vec{v} of a point on the rim at (x,y)=(0 m,0.20 m)(x, y) = (0\text{ m}, 0.20\text{ m})?

Answer

v⃗=10i^ m/s\vec{v} = 10\hat{i}\text{ m/s}. Speed is v=ωr=(50)(0.20)=10 m/sv = \omega r = (50)(0.20) = 10\text{ m/s}. At the top of the circle (0,+r)(0, +r), clockwise motion points to the right (+i^+\hat{i}).

02

A hard drive platter spins counterclockwise at 7200 rpm7200\text{ rpm}. A magnetic sector is located at (x,y)=(−45 mm,0 mm)(x, y) = (-45\text{ mm}, 0\text{ mm}). Find the sector's velocity vector v⃗\vec{v} in m/s\text{m/s} using unit vectors.

Answer

v⃗≈−33.9j^ m/s\vec{v} \approx -33.9\hat{j}\text{ m/s} (or −10.8πj^ m/s-10.8\pi\hat{j}\text{ m/s}). First, ω=7200×2π60=240π rad/s\omega = \frac{7200 \times 2\pi}{60} = 240\pi\text{ rad/s}. The radius is r=0.045 mr = 0.045\text{ m}, so v=240π×0.045=10.8π m/s≈33.9 m/sv = 240\pi \times 0.045 = 10.8\pi\text{ m/s} \approx 33.9\text{ m/s}. At (−r,0)(-r, 0) (9 o'clock), counterclockwise motion goes downward (−j^-\hat{j}).

03

A centrifuge tube rotates clockwise at 3000 rpm3000\text{ rpm} along a circle of radius r=10 cmr = 10\text{ cm}. Find the unit vector of velocity when the tube is at the 45-degree position (x,y)=(rcos⁡45∘,−rsin⁡45∘)(x, y) = (r\cos 45^\circ, -r\sin 45^\circ) in the fourth quadrant.

Answer

u^v=−22i^−22j^\hat{u}_v = -\frac{\sqrt{2}}{2}\hat{i} - \frac{\sqrt{2}}{2}\hat{j}. The position vector is r⃗=r2i^−r2j^\vec{r} = \frac{r}{\sqrt{2}}\hat{i} - \frac{r}{\sqrt{2}}\hat{j}. Moving clockwise in the fourth quadrant from (+x,−y)(+x, -y) toward the bottom (0,−y)(0, -y), motion is directed leftward and downward, perpendicular to r⃗\vec{r}.

Loading workspace…