Resources

An electric delivery van travelling along a straight horizontal road accelerates uniformly from rest to a cruising speed of 24.0 m/s24.0\text{ m/s} over a distance of 180 m180\text{ m}. Calculate the magnitude of the van's constant acceleration and the time taken to travel this distance.

Answer and steps

Final answer

a=1.60 m/s2a = 1.60\text{ m/s}^2, t=15.0 st = 15.0\text{ s}

Steps

Step 1: Identify the given quantities

From the problem statement, the motion is in a straight line with constant acceleration:

  • Initial velocity: u=0 m/su = 0\text{ m/s} (the van starts "from rest")
  • Final velocity: v=24.0 m/sv = 24.0\text{ m/s}
  • Displacement: s=180 ms = 180\text{ m}

We need to find:

  • Acceleration: aa
  • Time taken: tt

Step 2: Calculate the acceleration (aa)

Choose the kinematic equation relating initial velocity, final velocity, acceleration, and displacement: v2=u2+2asv^2 = u^2 + 2as

Substitute the known values into the equation: (24.0 m/s)2=(0 m/s)2+2⋅a⋅(180 m)(24.0\text{ m/s})^2 = (0\text{ m/s})^2 + 2 \cdot a \cdot (180\text{ m})

576=360a576 = 360a

Solve for aa: a=576360=1.60 m/s2a = \frac{576}{360} = 1.60\text{ m/s}^2


Step 3: Calculate the time taken (tt)

Using the definition of acceleration, v=u+atv = u + at: 24.0 m/s=0 m/s+(1.60 m/s2)⋅t24.0\text{ m/s} = 0\text{ m/s} + (1.60\text{ m/s}^2) \cdot t

Solve for tt: t=24.01.60=15.0 st = \frac{24.0}{1.60} = 15.0\text{ s}

(Alternative method: Using the average velocity formula, s=(u+v2)ts = \left(\frac{u + v}{2}\right)t, gives 180=(0+24.02)t=12.0t180 = \left(\frac{0 + 24.0}{2}\right)t = 12.0t, which directly confirms t=18012.0=15.0 st = \frac{180}{12.0} = 15.0\text{ s}.)


Pitfall to Avoid

  • Always confirm whether the motion begins from rest (u=0u = 0) before applying simplified formulas. If u≠0u \neq 0, terms involving uu cannot be omitted.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to square the final velocity when applying the kinematic relation v² = u² + 2as, resulting in an incorrect acceleration of 0.0667 m/s² and a subsequent incorrect time of 360 s.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v=u+2as  ⟹  24.0=0+2(a)(180)  ⟹  24.0=360a  ⟹  a=24.0360=0.0667 m/s2v = u + 2as \implies 24.0 = 0 + 2(a)(180) \implies 24.0 = 360a \implies a = \frac{24.0}{360} = 0.0667\text{ m/s}^2

    Correct

    v2=u2+2as  ⟹  (24.0)2=02+2(a)(180)  ⟹  576=360a  ⟹  a=576360=1.60 m/s2v^2 = u^2 + 2as \implies (24.0)^2 = 0^2 + 2(a)(180) \implies 576 = 360a \implies a = \frac{576}{360} = 1.60\text{ m/s}^2

    You omitted the squares on the velocity terms. The correct kinematic formula relating velocities, acceleration, and displacement without time is v2=u2+2asv^2 = u^2 + 2as.

  2. Step 2

    v=u+at  ⟹  24.0=0+0.0667t  ⟹  t=24.00.0667=360 sv = u + at \implies 24.0 = 0 + 0.0667t \implies t = \frac{24.0}{0.0667} = 360\text{ s}

    Correct

    v=u+at  ⟹  24.0=0+1.60t  ⟹  t=24.01.60=15.0 sv = u + at \implies 24.0 = 0 + 1.60t \implies t = \frac{24.0}{1.60} = 15.0\text{ s}

    Your method of using v=u+atv = u + at to solve for time is algebraically correct, but substituting your previous incorrect acceleration of a=0.0667 m/s2a = 0.0667\text{ m/s}^2 caused an incorrect time value.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the van starts from rest (u=0 m/su = 0\text{ m/s}), reaches v=24.0 m/sv = 24.0\text{ m/s}, and covers a displacement of s=180 ms = 180\text{ m}.

You correctly selected v=u+atv = u + at as a valid equation to relate velocity, acceleration, and time.

You performed each algebraic rearrangement and division accurately based on the equations you wrote.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Kinematic Formula Distortion

You wrote v=u+2asv = u + 2as without squaring the initial and final velocity terms.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You misremembered the time-independent kinematic relation v2=u2+2asv^2 = u^2 + 2as. Checking the units reveals that [2as]=(m/s2)(m)=m2/s2[2as] = (\text{m/s}^2)(\text{m}) = \text{m}^2/\text{s}^2, which has units of velocity squared, confirming that the velocities must also be squared.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Consistency
  • In every valid physics formula, every added or equated term must share identical physical units.

  • Check that [v2]=[u2]=[2as]=m2/s2[v^2] = [u^2] = [2as] = \text{m}^2/\text{s}^2 before substituting numerical values.

Independent Verification of Time
  • When finding both aa and tt, you can find time directly using average velocity: s=(u+v2)ts = \left(\frac{u + v}{2}\right)t.

  • Calculate t=2su+v=2(180)0+24.0=15.0 st = \frac{2s}{u + v} = \frac{2(180)}{0 + 24.0} = 15.0\text{ s} to validate your answer without relying on your acceleration calculation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute the known values into v2=u2+2asv^2 = u^2 + 2as: (24.0 m/s)2=(0 m/s)2+2a(180 m)(24.0\text{ m/s})^2 = (0\text{ m/s})^2 + 2a(180\text{ m}).

  2. Simplify the squared values: 576=360a576 = 360a.

  3. Solve for acceleration: a=576360=1.60 m/s2a = \frac{576}{360} = 1.60\text{ m/s}^2.

  4. Substitute a=1.60 m/s2a = 1.60\text{ m/s}^2 into v=u+atv = u + at: 24.0=0+1.60t24.0 = 0 + 1.60t, which gives t=15.0 st = 15.0\text{ s}.

Final answer

a=1.60 m/s2a = 1.60\text{ m/s}^2, t=15.0 st = 15.0\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the four standard constant-acceleration equations and perform unit checks on each term (v2v^2, u2u^2, and 2as2as all have units of m2/s2\text{m}^2/\text{s}^2).

  • Practice calculating time first using s=u+v2ts = \frac{u+v}{2}t whenever both initial and final velocities and displacement are given.

OverviewACEpath Teacher's Diagnosis

02 The student omits the factor of 2 in the formula v² = u² + 2as, calculating acceleration as 3.20 m/s² and then finding a time of 7.50 s.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v2=u2+as  ⟹  576=0+a(180)  ⟹  576=180a  ⟹  a=576180=3.20 m/s2v^2 = u^2 + as \implies 576 = 0 + a(180) \implies 576 = 180a \implies a = \frac{576}{180} = 3.20\text{ m/s}^2

    Correct

    v2=u2+2as  ⟹  (24.0)2=02+2a(180)  ⟹  576=360a  ⟹  a=1.60 m/s2v^2 = u^2 + 2as \implies (24.0)^2 = 0^2 + 2a(180) \implies 576 = 360a \implies a = 1.60\text{ m/s}^2

    The kinematic relation derived from average velocity and acceleration is v2=u2+2asv^2 = u^2 + 2as. By writing v2=u2+asv^2 = u^2 + as, you omitted the coefficient 22, leading to an acceleration twice as large as the correct value.

  2. Step 2

    v=u+at  ⟹  24.0=0+3.20t  ⟹  t=24.03.20=7.50 sv = u + at \implies 24.0 = 0 + 3.20t \implies t = \frac{24.0}{3.20} = 7.50\text{ s}

    Correct

    v=u+at  ⟹  24.0=0+1.60t  ⟹  t=24.01.60=15.0 sv = u + at \implies 24.0 = 0 + 1.60t \implies t = \frac{24.0}{1.60} = 15.0\text{ s}

    Your method of using v=u+atv = u + at to find the time was completely sound, but substituting the incorrect acceleration a=3.20 m/s2a = 3.20\text{ m/s}^2 from Step 1 caused the final time to be incorrect.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that starting from rest means u=0 m/su = 0\text{ m/s}.

You correctly calculated (24.0)2=576(24.0)^2 = 576.

You selected appropriate kinematic formulas connecting the given variables.

You accurately solved the linear equation v=u+atv = u + at for tt using your calculated value of aa.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted coefficient in kinematic formula

You wrote v2=u2+asv^2 = u^2 + as instead of v2=u2+2asv^2 = u^2 + 2as, forgetting the factor of 22 in front of asas.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Incomplete recall of the standard constant-acceleration equations, likely confusing the kinematic formula with expressions where coefficients are 11 or forgetting its connection to the work-energy theorem (Fs=12mv2−12mu2Fs = \frac{1}{2}m v^2 - \frac{1}{2}m u^2).

REASONING PATH
Your ACEpath teacher’s suggested approach
Verify standard kinematic equations
  • The four standard constant-acceleration kinematic equations are v=u+atv = u + at, s=ut+12at2s = ut + \frac{1}{2}at^2, v2=u2+2asv^2 = u^2 + 2as, and s=u+v2ts = \frac{u+v}{2}t.

  • Always write down the general formula with all numerical coefficients before substituting numbers.

Physical / work-energy sanity check
  • Multiplying by mm gives 12mv2−12mu2=mas=Fs\frac{1}{2}mv^2 - \frac{1}{2}mu^2 = mas = Fs, which requires the factor of 22 when written as v2−u2=2asv^2 - u^2 = 2as.

  • Check that the factor of 22 appears with acceleration whenever velocity is squared.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute into the correct formula: v2=u2+2asv^2 = u^2 + 2as

  2. (24.0)2=02+2⋅a⋅180  ⟹  576=360a(24.0)^2 = 0^2 + 2 \cdot a \cdot 180 \implies 576 = 360a

  3. a=576360=1.60 m/s2a = \frac{576}{360} = 1.60\text{ m/s}^2

  4. Substitute a=1.60 m/s2a = 1.60\text{ m/s}^2 into v=u+atv = u + at: 24.0=0+1.60t24.0 = 0 + 1.60t

  5. t=24.01.60=15.0 st = \frac{24.0}{1.60} = 15.0\text{ s}

Final answer

a=1.60 m/s2a = 1.60\text{ m/s}^2, t=15.0 st = 15.0\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the four kinematic equations with their exact coefficients, paying special attention to the factor of 22 in v2=u2+2asv^2 = u^2 + 2as and 12\frac{1}{2} in s=ut+12at2s = ut + \frac{1}{2}at^2.

  • Use the average-velocity formula s=(u+v2)ts = \left(\frac{u+v}{2}\right)t as an independent check for time whenever both initial and final velocities are known.

OverviewACEpath Teacher's Diagnosis

03 The student misapplies the constant-velocity formula t = s / v to uniformly accelerated motion, calculating the time as 7.50 s and using it to find an acceleration of 3.20 m/s².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    t=sv  ⟹  t=18024.0  ⟹  t=7.50 st = \frac{s}{v} \implies t = \frac{180}{24.0} \implies t = 7.50\text{ s}

    Correct

    s=(u+v2)t  ⟹  180=(0+24.02)t  ⟹  t=15.0 ss = \left(\frac{u + v}{2}\right)t \implies 180 = \left(\frac{0 + 24.0}{2}\right)t \implies t = 15.0\text{ s}

    The formula t=svt = \frac{s}{v} only applies when speed is constant. Because the van accelerates uniformly from rest, the average speed during the trip is u+v2=12.0 m/s\frac{u + v}{2} = 12.0\text{ m/s}, giving a travel time of 15.0 s15.0\text{ s}.

  2. Step 2

    a=v−ut  ⟹  a=24.0−07.50  ⟹  a=3.20 m/s2a = \frac{v - u}{t} \implies a = \frac{24.0 - 0}{7.50} \implies a = 3.20\text{ m/s}^2

    Correct

    a=v−ut=24.0−015.0=1.60 m/s2a = \frac{v - u}{t} = \frac{24.0 - 0}{15.0} = 1.60\text{ m/s}^2

    Your formula a=v−uta = \frac{v - u}{t} is correct for constant acceleration, but substituting your incorrect time value of 7.50 s7.50\text{ s} resulted in an acceleration that is twice the correct magnitude.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the initial velocity as u=0 m/su = 0\text{ m/s} from rest and the final velocity as v=24.0 m/sv = 24.0\text{ m/s}.

You selected the valid constant-acceleration relation a=v−uta = \frac{v - u}{t}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Misapplied constant-speed formula to accelerated motion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the final instantaneous cruising speed as the constant speed for the entire 180 m180\text{ m} distance instead of accounting for continuous uniform acceleration from 0 m/s0\text{ m/s}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Motion Type Check
  • If velocity changes with time (a≠0a \neq 0), displacement is governed by kinematic equations, not s=vts = vt.

  • Always verify whether speed is constant or accelerating before choosing a time equation.

Average Speed for Uniform Acceleration
  • For constant acceleration, displacement is s=vavgt=(u+v2)ts = v_{\text{avg}} t = \left(\frac{u + v}{2}\right)t.

  • Divide displacement by the average velocity u+v2\frac{u + v}{2}, or use v2=u2+2asv^2 = u^2 + 2as directly when time is initially unknown.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the kinematic equation that connects displacement and velocities independently of time: v2=u2+2asv^2 = u^2 + 2as.

  2. Substitute the given values: (24.0)2=02+2a(180)  ⟹  576=360a(24.0)^2 = 0^2 + 2a(180) \implies 576 = 360a.

  3. Solve for acceleration: a=576360=1.60 m/s2a = \frac{576}{360} = 1.60\text{ m/s}^2.

  4. Find the time using v=u+atv = u + at: 24.0=0+1.60t  ⟹  t=24.01.60=15.0 s24.0 = 0 + 1.60t \implies t = \frac{24.0}{1.60} = 15.0\text{ s}.

Final answer

a=1.60 m/s2a = 1.60\text{ m/s}^2, t=15.0 st = 15.0\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between instantaneous velocity and average velocity during accelerated motion.

  • Practice matching the four standard kinematic equations (v=u+atv = u + at, s=ut+12at2s = ut + \frac{1}{2}at^2, v2=u2+2asv^2 = u^2 + 2as, s=u+v2ts = \frac{u+v}{2}t) to given and required variables.

Lock it in

Similar question

01

A train accelerates uniformly from rest to a speed of 30.0 m/s30.0\text{ m/s} over a distance of 450 m450\text{ m}. Calculate the magnitude of its acceleration and the time taken.

Answer

a=1.00 m/s2a = 1.00\text{ m/s}^2, t=30.0 st = 30.0\text{ s}. Key steps: v2=u2+2as  ⟹  (30.0)2=0+2a(450)  ⟹  900=900a  ⟹  a=1.00 m/s2v^2 = u^2 + 2as \implies (30.0)^2 = 0 + 2a(450) \implies 900 = 900a \implies a = 1.00\text{ m/s}^2. Then v=u+at  ⟹  30.0=1.00t  ⟹  t=30.0 sv = u + at \implies 30.0 = 1.00t \implies t = 30.0\text{ s} (or s=u+v2t  ⟹  450=15.0t  ⟹  t=30.0 ss = \frac{u+v}{2}t \implies 450 = 15.0t \implies t = 30.0\text{ s}).

02

A sports car travelling at 18.0 m/s18.0\text{ m/s} brakes uniformly to rest over a distance of 54.0 m54.0\text{ m}. Determine the magnitude of the car's deceleration and the time taken to stop.

Answer

a=3.00 m/s2a = 3.00\text{ m/s}^2 (magnitude), t=6.00 st = 6.00\text{ s}. Key steps: v2=u2+2as  ⟹  02=(18.0)2+2a(54.0)  ⟹  0=324+108a  ⟹  a=−3.00 m/s2v^2 = u^2 + 2as \implies 0^2 = (18.0)^2 + 2a(54.0) \implies 0 = 324 + 108a \implies a = -3.00\text{ m/s}^2. Magnitude of deceleration is 3.00 m/s23.00\text{ m/s}^2. Then t=v−ua=0−18.0−3.00=6.00 st = \frac{v - u}{a} = \frac{0 - 18.0}{-3.00} = 6.00\text{ s}.

03

An airplane touches down on a runway at 70.0 m/s70.0\text{ m/s} and decelerates uniformly at 2.50 m/s22.50\text{ m/s}^2 until its speed is reduced to 10.0 m/s10.0\text{ m/s}. Find the runway distance required for this deceleration and the time elapsed.

Answer

s=960 ms = 960\text{ m}, t=24.0 st = 24.0\text{ s}. Key steps: v2=u2+2as  ⟹  (10.0)2=(70.0)2+2(−2.50)s  ⟹  100=4900−5.00s  ⟹  5.00s=4800  ⟹  s=960 mv^2 = u^2 + 2as \implies (10.0)^2 = (70.0)^2 + 2(-2.50)s \implies 100 = 4900 - 5.00s \implies 5.00s = 4800 \implies s = 960\text{ m}. Time: v=u+at  ⟹  10.0=70.0−2.50t  ⟹  2.50t=60.0  ⟹  t=24.0 sv = u + at \implies 10.0 = 70.0 - 2.50t \implies 2.50t = 60.0 \implies t = 24.0\text{ s}.

Loading workspace…