Resources
In a resonance tube experiment conducted at where the speed of sound is , an acoustic speaker driven by a function generator is placed near the open top end of a vertical cylinder filled with water. A calibrated microphone connected to an oscilloscope is moved along the column, generating an acoustic standing wave profile of sound pressure amplitude versus vertical probe position measured from the top open rim (). The open end acts as a pressure node (), while the water surface acts as a pressure antinode. As the water level is slowly lowered, the oscilloscope trace registers the first two consecutive resonance maxima in tube acoustic energy at water surface depths of and . Accounting for the acoustic end correction at the tube rim: (a) determine the operational acoustic wavelength from the spatial separation of the resonance nodes, (b) calculate the frequency emitted by the speaker, and (c) calculate the empirical end correction of the resonance tube.
Answer and steps
Final answer
(a) , (b) , (c)
Steps
Part (a): Determine the Wavelength
A vertical cylinder closed by water at the bottom and open to the atmosphere at the top forms a pipe open at one end and closed at the other:
- At the open top rim (), the acoustic wave reflects slightly outside the physical boundary at an effective distance , known as the end correction. The effective pressure node is located at .
- At the water surface, the boundary is rigid, forming a pressure antinode (or displacement node).
For a pipe with one open end and one closed end, resonant standing waves form when the effective length of the vibrating air column matches an odd multiple of a quarter-wavelength:
For the first two consecutive resonant states ( and ):
- First resonance at depth :
- Second resonance at depth :
Subtracting the first equation from the second eliminates the unknown end correction :
Solving for the wavelength :
Substitute the given depths and :
Part (b): Calculate the Emitted Frequency
Using the fundamental wave relationship , where :
Substitute the values:
Part (c): Calculate the Empirical End Correction
Using the resonance condition for the first harmonic:
Rearranging for the end correction :
Substitute and :
In SI units:
(Verification using the second resonance: , which confirms consistency.)
Typical errors
01 The student confuses the distance between consecutive resonances with a full wavelength rather than half a wavelength, leading to halving the wavelength and doubling the calculated frequency.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Consecutive resonance levels in a pipe closed at one end differ by an added pressure node-to-node (or antinode-to-antinode) segment, which spans , not a full wavelength .
- Step 2Correct
Your formula and substitution method are correct, but your result is doubled because it used the halved wavelength from Part (a).
- Step 3Correct
You correctly set up the effective tube length for the first resonance, but substituting yielded an unphysical negative end correction.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the first harmonic resonance formula .
You used the fundamental wave speed equation correctly to relate speed, frequency, and wavelength.
You correctly subtracted the two given water levels to find their spatial difference.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou set instead of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisIn standing waves, adjacent nodes or adjacent antinodes are spaced by half a wavelength (). When consecutive resonances are observed by changing the column length, each successive resonance corresponds to adding one additional half-wave loop between the open top and the water surface.
REASONING PATH
Your ACEpath teacher’s suggested approach- Standing Wave Node Spacing
The spatial distance between any two consecutive nodes (or consecutive antinodes) is .
Always write when subtracting consecutive resonance lengths.
- Sanity Check on End Correction
For an open circular pipe of radius , the acoustic end correction is positive and approximately .
If your calculated end correction is negative or extraordinarily large, verify whether your wavelength was accidentally halved or calculated incorrectly.
CORRECTED PATH
ACEpath Teacher's DemonstrationSet the distance between consecutive resonance depths equal to half a wavelength: .
Calculate the true wavelength: .
Compute the frequency using : .
Substitute into the first resonance equation: .
(a) , (b) , (c)
02 The student ignores the end correction when setting up the first resonance length, assuming z₁ is directly λ / 4, which yields an incorrect wavelength and frequency.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You assumed the first resonance depth equals without including the end correction . The effective length is and , so subtracting them gives , which yields .
- Step 2Correct
You correctly applied the wave speed formula , but your calculated value was affected by the incorrect wavelength from Step 1.
- Step 3Correct
You subtracted and , which yields , so . You missed the factor of in the denominator.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the wave speed relationship to connect frequency, speed, and wavelength.
You recognized that the first and second resonances correspond to fundamental and third-harmonic quarter-wavelength ratios.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou omitted the factor of when relating to .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou assumed the open tube boundary occurs exactly at the physical rim () rather than accounting for the acoustic antinode extending beyond the rim by an end correction , which requires using the difference between consecutive resonances to find .
REASONING PATH
Your ACEpath teacher’s suggested approach- Eliminating End Correction
For consecutive resonances in a closed-open tube, .
Always compute from the difference between consecutive resonance positions rather than from a single measured length.
- Solving for End Correction
Once is known, or .
Substitute the corrected back into the first resonance condition to solve directly for .
CORRECTED PATH
ACEpath Teacher's Demonstration(a) , (b) , (c) $e = 0.500 = 5.00 10^{-3}
03 The student misplaces the sign of the end correction by writing z₁ - e = λ / 4 instead of z₁ + e = λ / 4, resulting in a negative end correction.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
The effective air column extends slightly outside the physical tube rim to the pressure node located at a distance above the rim. Therefore, the effective quarter-wave length is the sum of the physical depth and the end correction, .
- Step 4Correct
This step carries forward the sign error from the previous step, resulting in a negative end correction.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the spatial difference between consecutive resonance positions to eliminate the end correction and determine the wavelength.
You applied the wave speed equation accurately to compute the frequency.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou wrote instead of , which made the physical column appear longer than the acoustic quarter-wavelength.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisMisinterpreting how the acoustic end correction modifies physical tube length: the effective pressure node forms slightly outside the open rim, meaning the acoustic standing wave is longer than the physical air column ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Acoustic End Correction Position
For an open pipe rim, the antinode in displacement (or node in pressure) is located slightly outside the tube at an effective distance beyond the rim.
Always add the end correction to the measured physical tube length: .
- Physical Sanity Check on End Correction
An end correction represents an extra length of vibrating air and must be a positive quantity ().
If your calculation produces a negative end correction, check whether you swapped the order of subtraction or wrote instead of .
CORRECTED PATH
ACEpath Teacher's DemonstrationSubstitute the known values:
Solve for :
(a) , (b) , (c)
Lock it in
What is the spatial separation between two consecutive resonance lengths in a variable-length resonance tube driven at frequency ?
. Each successive resonance adds one standing wave loop (one node and one antinode), which corresponds to half a wavelength.
Similar question
A tuning fork of frequency is held over a resonance tube. The first two resonances occur at water levels and . Calculate the speed of sound in the tube.
Answer
. The wavelength is . Then .
A vertical tube open at the top has consecutive resonances at air column lengths of and . (a) Find the acoustic wavelength . (b) Determine the end correction of the tube.
Answer
(a) ; (b) . Key steps: . For the first harmonic, .
A sound wave of frequency resonates in an open-topped water column where sound speed is . The inner radius of the tube is , with an empirical end correction . Determine the water depths and from the top rim for the first two resonance modes.
Answer
and . Key steps: . The end correction is . First resonance: . Second resonance: .