Resources

An imported metric calibration specimen is labeled with a mass of m=850 gm = 850\text{ g}. An aerospace engineer must analyze its mechanical characteristics in standard imperial engineering units and SI units at a test facility where g=32.17 ft/s2g = 32.17\text{ ft/s}^2 (9.806 m/s29.806\text{ m/s}^2). Given that 1 lb=4.44822 N1\text{ lb} = 4.44822\text{ N} and 1 slug=14.5939 kg1\text{ slug} = 14.5939\text{ kg}: (a) Convert the specimen's mass to standard SI kilograms (kg\text{kg}) and imperial engineering units of inertia (slugs). (b) Calculate the gravitational force (weight) acting on the specimen in both newtons (N\text{N}) and pounds-force (lbf\text{lbf}).

Answer and steps

Final answer

(a) Mass=0.850 kg=5.82×10−2 slugs\text{Mass} = 0.850\text{ kg} = 5.82 \times 10^{-2}\text{ slugs}; (b) W=8.34 N=1.87 lbfW = 8.34\text{ N} = 1.87\text{ lbf}.

Steps

Part (a): Mass in Kilograms (kg\text{kg}) and Slugs (slugs\text{slugs})

1. Convert grams to kilograms Mass measures an object's inertia (resistance to acceleration) and is an intrinsic property that does not depend on gravity. In the International System of Units (SI), the base unit of mass is the kilogram (kg\text{kg}):

m=850 g×1 kg1000 g=0.850 kgm = 850\text{ g} \times \frac{1\text{ kg}}{1000\text{ g}} = 0.850\text{ kg}

2. Convert kilograms to slugs In imperial engineering units, the fundamental unit of mass (inertia) is the slug. Using the given conversion factor 1 slug=14.5939 kg1\text{ slug} = 14.5939\text{ kg}:

m=0.850 kg14.5939 kg/slug≈0.05824 slugs=5.82×10−2 slugsm = \frac{0.850\text{ kg}}{14.5939\text{ kg/slug}} \approx 0.05824\text{ slugs} = 5.82 \times 10^{-2}\text{ slugs}


Part (b): Weight in Newtons (N\text{N}) and Pounds-force (lbf\text{lbf})

1. Calculate weight in Newtons Weight (WW) is the downward gravitational force acting on a mass, defined by Newton's second law as W=mgW = mg. Using the SI acceleration due to gravity g=9.806 m/s2g = 9.806\text{ m/s}^2:

W=m⋅g=0.850 kg×9.806 m/s2=8.3351 N≈8.34 NW = m \cdot g = 0.850\text{ kg} \times 9.806\text{ m/s}^2 = 8.3351\text{ N} \approx 8.34\text{ N}

2. Convert weight to pounds-force Using the relation 1 lb=4.44822 N1\text{ lb} = 4.44822\text{ N}:

W=8.3351 N4.44822 N/lb≈1.87 lbfW = \frac{8.3351\text{ N}}{4.44822\text{ N/lb}} \approx 1.87\text{ lbf}

(Check using imperial units directly: W=m⋅g=0.05824 slug×32.17 ft/s2≈1.87 lbfW = m \cdot g = 0.05824\text{ slug} \times 32.17\text{ ft/s}^2 \approx 1.87\text{ lbf}, confirming consistency.)

Common Pitfall: Mass and weight are frequently confused in daily language because pounds are used for both force (lbf\text{lbf}) and mass (lbm\text{lbm}). In engineering mechanics, mass represents inertia (kg\text{kg} or slug\text{slug}), whereas weight is a force (N\text{N} or lbf\text{lbf}) that depends on the local gravitational field gg.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student multiplies by the conversion factor 14.5939 kg/slug instead of dividing, incorrectly yielding a larger mass in slugs.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m=850 g=0.85 kgm = 850\text{ g} = 0.85\text{ kg}

  2. Step 2

    m=0.85×14.5939=12.405 slugm = 0.85 \times 14.5939 = 12.405\text{ slug}

    Correct

    m=0.850 kg14.5939 kg/slug≈5.82×10−2 slugsm = \frac{0.850\text{ kg}}{14.5939\text{ kg/slug}} \approx 5.82 \times 10^{-2}\text{ slugs}

    Because 1 slug=14.5939 kg1\text{ slug} = 14.5939\text{ kg}, a slug is significantly larger than a kilogram. To convert from kilograms to slugs, you must divide by 14.5939 kg/slug14.5939\text{ kg/slug} so that the kilogram units cancel.

  3. Step 3

    W=0.85 kg×9.806 m/s2=8.335 NW = 0.85\text{ kg} \times 9.806\text{ m/s}^2 = 8.335\text{ N}

  4. Step 4

    W=8.335 N/4.44822=1.874 lbfW = 8.335\text{ N} / 4.44822 = 1.874\text{ lbf}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted grams to kilograms using the metric prefix factor.

You correctly used W=mgW = mg to determine the weight in newtons.

You set up the unit ratio correctly to convert newtons into pounds-force.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted conversion factor

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You multiplied by the numerical conversion factor 14.593914.5939 instead of dividing by it, without tracking the unit cancellation kg×1 slug14.5939 kg\text{kg} \times \frac{1\text{ slug}}{14.5939\text{ kg}}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Unit Cancellation
  • Treat units algebraically: to cancel a unit, multiply by a conversion ratio that places that unit in the denominator.

  • Write the conversion ratio explicitly with units: kg×(1 slug14.5939 kg)=slug\text{kg} \times \left(\frac{1\text{ slug}}{14.5939\text{ kg}}\right) = \text{slug}.

Physical Reasonableness Check
  • Converting from a smaller unit (extkg ext{kg}) to a larger unit (extslug ext{slug}) must always yield a numerically smaller quantity.

  • Since 1 slug≈14.6 kg1\text{ slug} \approx 14.6\text{ kg}, check that your mass in slugs is roughly 1515 times smaller than its mass in kilograms.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the conversion factor with units: 1=1 slug14.5939 kg1 = \frac{1\text{ slug}}{14.5939\text{ kg}}.

  2. Multiply the mass in kilograms by the conversion factor: m=0.850 kg×1 slug14.5939 kgm = 0.850\text{ kg} \times \frac{1\text{ slug}}{14.5939\text{ kg}}.

  3. Perform the division: m=0.85014.5939≈0.05824 slugs=5.82×10−2 slugsm = \frac{0.850}{14.5939} \approx 0.05824\text{ slugs} = 5.82 \times 10^{-2}\text{ slugs}.

Final answer

(a) m=0.850 kg=5.82×10−2 slugsm = 0.850\text{ kg} = 5.82 \times 10^{-2}\text{ slugs}; (b) W=8.34 N=1.87 lbfW = 8.34\text{ N} = 1.87\text{ lbf}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the explicit unit fraction (e.g., 1 slug14.5939 kg\frac{1\text{ slug}}{14.5939\text{ kg}}) so you can cross out matching units before calculating.

  • Perform a sanity check on unit size: if the new unit is larger than the starting unit, the numerical value must decrease.

OverviewACEpath Teacher's Diagnosis

02 The student treats the mass directly in grams without converting to kilograms before calculating weight in newtons, resulting in a value off by a factor of 1000.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m=8501000=0.85 kgm = \frac{850}{1000} = 0.85\text{ kg}

  2. Step 2

    m=0.8514.5939=0.0582 slugm = \frac{0.85}{14.5939} = 0.0582\text{ slug}

  3. Step 3

    W=850×9.806=8335.1 NW = 850 \times 9.806 = 8335.1\text{ N}

    Correct

    W=m⋅g=0.850 kg×9.806 m/s2≈8.34 NW = m \cdot g = 0.850\text{ kg} \times 9.806\text{ m/s}^2 \approx 8.34\text{ N}

    You substituted the mass in grams (850 g850\text{ g}) instead of the SI base unit of mass (0.850 kg0.850\text{ kg}). Because 1 N=1 kg⋅m/s21\text{ N} = 1\text{ kg}\cdot\text{m/s}^2, mass must be in kilograms when computing force in newtons.

  4. Step 4

    W=8335.14.44822=1873.8 lbfW = \frac{8335.1}{4.44822} = 1873.8\text{ lbf}

    Correct

    W=8.3351 N4.44822 N/lbf≈1.87 lbfW = \frac{8.3351\text{ N}}{4.44822\text{ N/lbf}} \approx 1.87\text{ lbf}

    Your conversion method from newtons to pounds-force was correct, but the result inherited the factor-of-1000 error from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the conversion factors for kilograms and slugs.

You used the correct physical relations W=mgW = mg and converted between newtons and pounds-force using the given ratio.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
SI Base Unit Omission in Dynamic Equation

You reverted to the original given number (850850) instead of using the kilogram value (0.850.85) that you had already calculated.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking that the newton is defined strictly in terms of the SI base unit kilogram (1 N=1 kg⋅m/s21\text{ N} = 1\text{ kg}\cdot\text{m/s}^2), so grams cannot be plugged directly into W=mgW = mg.

REASONING PATH
Your ACEpath teacher’s suggested approach
SI Unit Consistency Check
  • Newton's second law (F=maF = ma and W=mgW = mg) yields force in newtons (N\text{N}) only when mass is expressed in kilograms (kg\text{kg}) and acceleration in m/s2\text{m/s}^2.

  • Always convert mass to kilograms before substituting it into any formula yielding newtons.

Physical Reality Check
  • An object under 1 kg1\text{ kg} (like a small textbook or bottle of water) weighs around 2 to 10 N2\text{ to }10\text{ N} (or roughly 1 to 2 lbf1\text{ to }2\text{ lbf}) on Earth.

  • Check whether an 850 g850\text{ g} object could reasonably weigh 8335 N8335\text{ N} (nearly a metric ton of force) or nearly 1900 lbf1900\text{ lbf}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute the mass in kilograms into the weight equation: W=(0.850 kg)(9.806 m/s2)=8.3351 N≈8.34 NW = (0.850\text{ kg})(9.806\text{ m/s}^2) = 8.3351\text{ N} \approx 8.34\text{ N}.

  2. Convert the corrected weight into pounds-force: W=8.3351 N4.44822 N/lbf≈1.87 lbfW = \frac{8.3351\text{ N}}{4.44822\text{ N/lbf}} \approx 1.87\text{ lbf}.

Final answer

(a) m=0.850 kg=5.82×10−2 slugsm = 0.850\text{ kg} = 5.82 \times 10^{-2}\text{ slugs}; (b) W=8.34 N=1.87 lbfW = 8.34\text{ N} = 1.87\text{ lbf}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the definition of the newton (1 N=1 kg⋅m/s21\text{ N} = 1\text{ kg}\cdot\text{m/s}^2) to reinforce why mass must always be in kilograms in dynamic formulas.

  • Practice using order-of-magnitude estimates on calculated forces to immediately spot factor-of-1000 unit discrepancies.

OverviewACEpath Teacher's Diagnosis

03 The student multiplies the force in newtons by the conversion factor 4.44822 N/lb instead of dividing, resulting in an incorrectly inflated weight in pounds-force.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m=850 g=0.85 kgm = 850\text{ g} = 0.85\text{ kg}

  2. Step 2

    m=0.8514.5939=0.0582 slugm = \frac{0.85}{14.5939} = 0.0582\text{ slug}

  3. Step 3

    W=0.85∗9.806=8.335 NW = 0.85 * 9.806 = 8.335\text{ N}

  4. Step 4

    W=8.335∗4.44822=37.076 lbfW = 8.335 * 4.44822 = 37.076\text{ lbf}

    Correct

    W=8.3351 N4.44822 N/lbf≈1.87 lbfW = \frac{8.3351\text{ N}}{4.44822\text{ N/lbf}} \approx 1.87\text{ lbf}

    Because 1 lbf=4.44822 N1\text{ lbf} = 4.44822\text{ N}, you need to divide newtons by 4.44822 N/lbf4.44822\text{ N/lbf} so that the newton units cancel out. Multiplying produced an incorrectly inflated value with improper units of N2/lbf\text{N}^2/\text{lbf}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted grams to kilograms using the standard metric prefix.

You used the correct relation between kilograms and slugs to compute inertia in imperial units.

You accurately applied W=mgW = mg with standard gravitational acceleration in SI units.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted conversion factor

You accidentally multiplied the force in newtons by 4.448224.44822 instead of dividing.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You did not set up dimensional analysis with explicit unit cancellation for the force conversion, which led to multiplying by a factor that needed to be in the denominator.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Cancellation Setup
  • When converting units, arrange the ratio so that the original unit cancels: original×targetoriginal=target\text{original} \times \frac{\text{target}}{\text{original}} = \text{target}.

  • Write the conversion ratio as (1 lbf4.44822 N)\left(\frac{1\text{ lbf}}{4.44822\text{ N}}\right) so that newtons cancel in the numerator and denominator.

Reasonableness Check
  • 1 lbf1\text{ lbf} is roughly equal to 4.45 N4.45\text{ N}, meaning a pound-force is a larger unit than a newton.

  • Verify that a quantity expressed in pounds-force has a smaller numerical value than the same quantity expressed in newtons.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the conversion using unit fractions: W=8.3351 N×(1 lbf4.44822 N)W = 8.3351\text{ N} \times \left(\frac{1\text{ lbf}}{4.44822\text{ N}}\right).

  2. Perform the division: 8.33514.44822≈1.8738 lbf\frac{8.3351}{4.44822} \approx 1.8738\text{ lbf}.

Final answer

W≈1.87 lbfW \approx 1.87\text{ lbf}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write unit labels explicitly during intermediate steps to catch multiplication versus division errors.

  • Cross-check force results in imperial units directly by computing W=mslug×gft/s2W = m_{\text{slug}} \times g_{\text{ft/s}^2} (0.0582 slug×32.17 ft/s2≈1.87 lbf0.0582\text{ slug} \times 32.17\text{ ft/s}^2 \approx 1.87\text{ lbf}).

Lock it in

Similar question

01

A small mechanical component has a mass of m=43.8 kgm = 43.8\text{ kg}. Using the conversion 1 slug=14.6 kg1\text{ slug} = 14.6\text{ kg}, convert this mass into slugs.

Answer

3.00 slugs3.00\text{ slugs}. Steps: Divide the mass in kilograms by the conversion factor: m=43.8 kg14.6 kg/slug=3.00 slugsm = \frac{43.8\text{ kg}}{14.6\text{ kg/slug}} = 3.00\text{ slugs}.

02

An instrument package with a mass of m=73.0 kgm = 73.0\text{ kg} is deployed to the Moon where gmoon=1.62 m/s2g_{\text{moon}} = 1.62\text{ m/s}^2. (a) Determine the mass of the package in slugs (1 slug=14.59 kg1\text{ slug} = 14.59\text{ kg}). (b) Calculate its weight on the Moon in newtons (extN ext{N}) and pounds-force (extlbf ext{lbf}, where 1 lb=4.45 N1\text{ lb} = 4.45\text{ N}).

Answer

(a) 5.00 slugs5.00\text{ slugs}; (b) W=118 N=26.6 lbfW = 118\text{ N} = 26.6\text{ lbf}. Steps: (a) m=73.0/14.59≈5.00 slugsm = 73.0 / 14.59 \approx 5.00\text{ slugs}. (b) W=mg=73.0 kg×1.62 m/s2=118.26 N≈118 NW = mg = 73.0\text{ kg} \times 1.62\text{ m/s}^2 = 118.26\text{ N} \approx 118\text{ N}; W=118.26 N/4.45 N/lb≈26.6 lbfW = 118.26\text{ N} / 4.45\text{ N/lb} \approx 26.6\text{ lbf}.

03

An aircraft counterweight is specified with an imperial mass of m=2.50 slugsm = 2.50\text{ slugs}. Given 1 slug=14.59 kg1\text{ slug} = 14.59\text{ kg} and g=32.2 ft/s2g = 32.2\text{ ft/s}^2 (9.81 m/s29.81\text{ m/s}^2), determine: (a) the mass in kilograms (extkg ext{kg}); (b) the weight on Earth in pounds-force (extlbf ext{lbf}) using imperial units directly (W=m⋅gW = m \cdot g); and (c) verify the weight in newtons (extN ext{N}).

Answer

(a) 36.5 kg36.5\text{ kg}; (b) 80.5 lbf80.5\text{ lbf}; (c) 358 N358\text{ N}. Steps: (a) m=2.50 slugs×14.59 kg/slug=36.48 kg≈36.5 kgm = 2.50\text{ slugs} \times 14.59\text{ kg/slug} = 36.48\text{ kg} \approx 36.5\text{ kg}. (b) W=m⋅g=2.50 slugs×32.2 ft/s2=80.5 lbfW = m \cdot g = 2.50\text{ slugs} \times 32.2\text{ ft/s}^2 = 80.5\text{ lbf}. (c) W=36.48 kg×9.81 m/s2=357.9 N≈358 NW = 36.48\text{ kg} \times 9.81\text{ m/s}^2 = 357.9\text{ N} \approx 358\text{ N} (or 80.5 lbf×4.448 N/lbf=358 N80.5\text{ lbf} \times 4.448\text{ N/lbf} = 358\text{ N}).

Loading workspace…