Resources
A thin, uniform rectangular plate of mass has a length along the -axis of and a width along the -axis of , lying in the -plane with its center at the origin. Instead of evaluating the moment of inertia about the standard perpendicular -axis through its center, determine: (a) the moment of inertia about the in-plane axis running along its centerline parallel to the -axis, (b) the moment of inertia about the in-plane axis running along its centerline parallel to the -axis, and (c) the angle between the plate's diagonal and the -axis.
Answer and steps
Final answer
(a) ; (b) ; (c)
Steps
Part (a): Moment of Inertia
The moment of inertia of any body about a given axis is defined by: where is the perpendicular distance from the mass element to the axis of rotation.
For rotation about the in-plane -axis (the line ):
- The perpendicular distance from any point on the plate to the -axis depends solely on its -coordinate: .
- The plate can be divided into thin strips parallel to the -axis, each having mass and extending from to .
Integrating over the width :
Substitute the given values:
Part (b): Moment of Inertia
Similarly, for rotation about the in-plane -axis (the line ):
- The perpendicular distance from any point to the -axis depends solely on its -coordinate: .
- Dividing the plate into thin vertical strips of mass over the range yields the standard formula:
Substitute the given values:
Common Pitfall: Be careful not to swap and . The dimension parallel to the rotation axis does not affect the distance of mass from that axis; only the dimension perpendicular to the axis determines the moment of inertia.
Part (c): Angle of the Diagonal
The plate is centered at the origin, with its vertices at .
A diagonal connects opposite corners, forming a right triangle with adjacent side of length along the -axis and opposite side of length along the -axis:
Substitute and :
Solving for :
Typical errors
01 The student confuses which dimension represents the perpendicular distance from the axis of rotation, using length a instead of width b for Ix and vice versa.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
For rotation about the -axis, the perpendicular distance from any mass element to the axis is its -coordinate. Integrating across the width along the -axis yields , not .
- Step 2Correct
For rotation about the -axis, the perpendicular distance from any mass element to the axis is its -coordinate. Integrating across the length along the -axis yields , not .
- Step 3
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the numerical values based on your chosen formulas.
You correctly identified the geometric ratio and angle of the diagonal in part (c).
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeWHY IT HAPPENED
ACEpath Teacher's DiagnosisYou associated the -axis with dimension (length along ) and the -axis with dimension (width along ), overlooking that the moment of inertia depends solely on the perpendicular distance from the axis of rotation (). Dimension parallel to an axis does not contribute to the perpendicular distance from that axis.
REASONING PATH
Your ACEpath teacher’s suggested approach- Identify Perpendicular Distance
The definition requires measuring distances perpendicular to the axis of rotation.
Before writing , sketch the axis and identify which coordinate or dimension runs perpendicular to that axis.
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify that rotation about the -axis measures distance along the -axis, so the relevant perpendicular dimension is the width : .
Substitute and to get .
Identify that rotation about the -axis measures distance along the -axis, so the relevant perpendicular dimension is the length : .
Substitute and to get .
(a) ; (b) ; (c)
02 The student misremembers the rotational inertia prefactor of a rectangular plate about its central axis as 1/3 instead of 1/12.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
The axis runs through the center of the plate, so the integration limits are from to , giving a prefactor of instead of .
- Step 2Correct
Like part (a), the -axis passes through the center of mass, requiring the central axis prefactor , not the edge prefactor .
- Step 3
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that the moment of inertia about each in-plane axis depends only on the dimension perpendicular to that axis.
You correctly set up and evaluated the trigonometry to find the angle of the diagonal in part (c).
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou substituted instead of into the formulas for and .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the moment of inertia formula for an axis along the boundary edge of a slab/rod () with the formula for an axis passing through its center of mass ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Locate the Rotation Axis Relative to the Center of Mass
For a uniform body of length perpendicular to the axis: about a central axis through the center of mass, ; about an edge axis, .
Always verify whether the problem specifies an axis passing through the centerline/origin or along an outer edge before selecting the numerical prefactor.
CORRECTED PATH
ACEpath Teacher's DemonstrationUse
Use
(a) ; (b) ; (c)
03 The student inverts the ratio of dimensions when finding the angle with the x-axis, calculating tan(θ) as adjacent over opposite (a/b) instead of opposite over adjacent (b/a).
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
For an angle measured relative to the -axis, the opposite side of the right triangle is along the -axis () and the adjacent side is along the -axis (). You set , which gave the angle with the -axis rather than the -axis.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that the moment of inertia about an in-plane centerline axis depends on the plate dimension perpendicular to that axis.
You evaluated the numerical expressions for both and with correct units.
You recognized that the tangent function relates the plate dimensions to the angle of the diagonal.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou inverted the numerator and denominator in the tangent ratio, setting it as rather than .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating the opposite and adjacent legs of the reference triangle when setting up relative to a specific coordinate axis, resulting in finding the complementary angle with the -axis () instead of the angle with the -axis ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Identify the reference axis
An angle measured with respect to the -axis has its adjacent leg along the -axis () and its opposite leg along the -axis ().
Sketch the right triangle and explicitly label the side touching as 'adjacent' and the side facing as 'opposite' before writing the ratio.
CORRECTED PATH
ACEpath Teacher's DemonstrationSet up the tangent definition for the angle with respect to the -axis: .
Substitute the dimensions and : .
Compute the inverse tangent: .
(a) ; (b) ; (c)
Lock it in
In the definition , what does represent for an object rotating about the -axis?
is the perpendicular distance from the mass element to the -axis, which in the -plane is simply .
Similar question
A thin, uniform rectangular sheet of mass has length along the -axis and width along the -axis. Calculate its moment of inertia about its horizontal centerline (the line ).
Answer
The perpendicular dimension to the -axis is the width along , . Thus, (or ).
A uniform rectangular door of mass has height and width . Find its moment of inertia about the vertical axis passing through its side hinges.
Answer
The rotation axis is vertical (parallel to height ). The perpendicular distance from the hinge axis depends only on the horizontal width , ranging from to . Treating it as a set of horizontal rods pivoted at one end gives .
A uniform rectangular plate of mass , length along the -axis, and width along the -axis lies in the -plane centered at the origin. Using and , state about the perpendicular -axis through the center, and explain which dimensions govern resistance to rotation about each axis.
Answer
By the perpendicular axis theorem for planar laminae, . Here, depends only on perpendicular distance (dimension ), depends only on perpendicular distance (dimension ), and rotation about the -axis depends on both coordinates (), combining both dimensions.