Resources

An unstable subatomic particle created in a cosmic ray shower travels through Earth's atmosphere at a constant speed of v=0.960cv = 0.960c. Mission sensors fixed on the ground record that the particle survives for a dilated time interval of Δt=7.50×10−6 s\Delta t = 7.50\times 10^{-6}\text{ s} before decaying. Reverse-engineer the initial intrinsic decay property by calculating the particle's proper lifetime τ0\tau_0 (the lifetime in its own rest frame).

Answer and steps

Final answer

τ0=2.10×10−6 s\tau_0 = 2.10\times 10^{-6}\text{ s}

Steps

Step 1: Identify the Relativistic Time Dilation Formula

According to special relativity, the time interval measured in a frame where the particle is moving at speed vv (dilated time, Δt\Delta t) is related to the time interval measured in the particle's rest frame (proper time, τ0\tau_0) by:

Δt=γτ0=τ01−v2c2\Delta t = \gamma \tau_0 = \frac{\tau_0}{\sqrt{1 - \frac{v^2}{c^2}}}

where:

  • Δt=7.50×10−6 s\Delta t = 7.50 \times 10^{-6}\text{ s} is the ground-measured (dilated) lifetime,
  • v=0.960cv = 0.960c is the speed of the particle relative to Earth,
  • τ0\tau_0 is the proper lifetime in the particle's own rest frame.

Step 2: Solve for Proper Lifetime τ0\tau_0

Rearranging the formula to isolate the proper lifetime:

τ0=Δt1−(vc)2\tau_0 = \Delta t \sqrt{1 - \left(\frac{v}{c}\right)^2}


Step 3: Calculate the Relativistic Factor

Substitute v=0.960cv = 0.960c:

vc=0.960\frac{v}{c} = 0.960

(vc)2=(0.960)2=0.9216\left(\frac{v}{c}\right)^2 = (0.960)^2 = 0.9216

1−(vc)2=1−0.9216=0.07841 - \left(\frac{v}{c}\right)^2 = 1 - 0.9216 = 0.0784

1−(vc)2=0.0784=0.280\sqrt{1 - \left(\frac{v}{c}\right)^2} = \sqrt{0.0784} = 0.280


Step 4: Compute τ0\tau_0

Substitute the values into the rearranged equation:

τ0=(7.50×10−6 s)×0.280\tau_0 = (7.50 \times 10^{-6}\text{ s}) \times 0.280

τ0=2.10×10−6 s\tau_0 = 2.10 \times 10^{-6}\text{ s}


Key Pitfall to Avoid

A common error is confusing proper time (τ0\tau_0) with dilated time (Δt\Delta t). The proper time is always measured by a clock that is present at both the creation and decay of the particle (the particle's rest frame). Moving clocks run slow relative to an observer at rest, which means the proper time interval is always strictly smaller than the dilated time interval (τ0<Δt\tau_0 < \Delta t).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses dilated time with proper time by multiplying the observed time by γ instead of dividing by γ.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    γ=11−(0.960)2=10.0784=10.280≈3.571\gamma = \frac{1}{\sqrt{1-(0.960)^2}} = \frac{1}{\sqrt{0.0784}} = \frac{1}{0.280} \approx 3.571

  2. Step 2

    τ0=γΔt=3.571×(7.50×10−6 s)\tau_0 = \gamma \Delta t = 3.571 \times (7.50 \times 10^{-6}\text{ s})

    Correct

    τ0=Δtγ=(7.50×10−6 s)×0.280\tau_0 = \frac{\Delta t}{\gamma} = (7.50 \times 10^{-6}\text{ s}) \times 0.280

    You multiplied the dilated time by γ\gamma instead of dividing. The time dilation formula states that Δt=γτ0\Delta t = \gamma \tau_0, which means proper time must be isolated as τ0=Δtγ\tau_0 = \frac{\Delta t}{\gamma}.

  3. Step 3

    τ0=2.68×10−5 s\tau_0 = 2.68 \times 10^{-5}\text{ s}

    Correct

    τ0=2.10×10−6 s\tau_0 = 2.10 \times 10^{-6}\text{ s}

    Your final numerical value was affected by using the inverted formula in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly set up and evaluated the Lorentz factor γ\gamma from the relative velocity.

You performed the arithmetic for the square root factor 1−(v/c)2=0.280\sqrt{1-(v/c)^2} = 0.280 without error.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Relativistic Time Dilation Inversion

You accidentally placed γ\gamma on the dilated time side rather than the proper time side, treating proper time as longer than the lab-frame lifetime.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing proper time τ0\tau_0 (the interval measured in the particle's rest frame) with dilated time Δt\Delta t (the interval measured by stationary lab observers). Because γ>1\gamma > 1, the proper time interval is always the shortest possible measurement between the two events ( τ0<Δt \,\tau_0 < \Delta t\,).

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify the Shortest Clock Interval
  • Proper time τ0\tau_0 is measured by a clock present at both the start and end events, meaning τ0\tau_0 is always strictly shorter than the dilated time Δt\Delta t for any observer moving relative to that clock ( Δt=γτ0≥τ0 \,\Delta t = \gamma \tau_0 \ge \tau_0\,).

  • Whenever you solve for proper time from a lab-measured lifetime, divide by γ\gamma or multiply by 1−v2/c2\sqrt{1-v^2/c^2} to ensure τ0<Δt\tau_0 < \Delta t.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Start from the fundamental time dilation equation: Δt=γτ0\Delta t = \gamma \tau_0.

  2. Rearrange to solve for proper lifetime: τ0=Δtγ=Δt1−v2c2\tau_0 = \frac{\Delta t}{\gamma} = \Delta t \sqrt{1 - \frac{v^2}{c^2}}.

  3. Substitute the known values: τ0=(7.50×10−6 s)×0.280\tau_0 = (7.50 \times 10^{-6}\text{ s}) \times 0.280.

Final answer

τ0=2.10×10−6 s\tau_0 = 2.10 \times 10^{-6}\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the qualitative check: 'Moving clocks run slow, so the proper time is always the smallest time interval (τ0≤Δt\tau_0 \le \Delta t).'

  • Practice rearranging Δt=γτ0\Delta t = \gamma \tau_0 for both variables before substituting numbers.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to square the velocity ratio v/c in the square root of the Lorentz factor calculation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    τ0=Δt1−vc\tau_0 = \Delta t\sqrt{1 - \frac{v}{c}}

    Correct

    τ0=Δt1−(vc)2\tau_0 = \Delta t\sqrt{1 - \left(\frac{v}{c}\right)^2}

    You wrote the square root factor with a linear ratio vc\frac{v}{c} rather than squaring the velocity ratio (vc)2\left(\frac{v}{c}\right)^2.

  2. Step 2

    τ0=(7.50×10−6 s)1−0.960  ⟹  τ0=(7.50×10−6 s)0.040  ⟹  τ0=(7.50×10−6 s)(0.200)=1.50×10−6 s\tau_0 = (7.50 \times 10^{-6}\text{ s})\sqrt{1 - 0.960} \implies \tau_0 = (7.50 \times 10^{-6}\text{ s})\sqrt{0.040} \implies \tau_0 = (7.50 \times 10^{-6}\text{ s})(0.200) = 1.50 \times 10^{-6}\text{ s}

    Correct

    τ0=(7.50×10−6 s)1−(0.960)2=(7.50×10−6 s)0.0784=2.10×10−6 s\tau_0 = (7.50 \times 10^{-6}\text{ s})\sqrt{1 - (0.960)^2} = (7.50 \times 10^{-6}\text{ s})\sqrt{0.0784} = 2.10 \times 10^{-6}\text{ s}

    Your arithmetic follows correctly from your formula, but the result is incorrect because the velocity ratio was not squared.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the proper lifetime τ0\tau_0 is smaller than the observed dilated lifetime Δt\Delta t.

You accurately substituted the given numerical values and carried out the arithmetic steps without calculation slips.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted exponent in Lorentz factor

No, this is a conceptual formula error because you repeated the same linear form 1−v/c\sqrt{1 - v/c} across multiple practice attempts.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You recalled the relativistic contraction factor 1γ=1−β2\frac{1}{\gamma} = \sqrt{1 - \beta^2} without squaring β=vc\beta = \frac{v}{c}. The Lorentz transformation derives from the invariant spacetime interval c2Δt2−Δx2=c2τ2c^2 \Delta t^2 - \Delta x^2 = c^2 \tau^2, which inherently depends on velocity squared (v2v^2).

REASONING PATH
Your ACEpath teacher’s suggested approach
Lorentz Factor Definition
  • γ=11−β2\gamma = \frac{1}{\sqrt{1 - \beta^2}}, where β=vc\beta = \frac{v}{c} is squared.

  • Always verify that the velocity ratio inside the square root has an exponent of 2: 1−(vc)2\sqrt{1 - \left(\frac{v}{c}\right)^2}.

Proper Time Relation
  • Δt=γτ0  ⟹  τ0=Δtγ=Δt1−(vc)2\Delta t = \gamma \tau_0 \implies \tau_0 = \frac{\Delta t}{\gamma} = \Delta t\sqrt{1 - \left(\frac{v}{c}\right)^2}

  • Check your units and symmetry: speed must enter as (v/c)2(v/c)^2 so that reversing the direction of motion (v→−vv \to -v) yields the identical time dilation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. β2=(vc)2=(0.960)2=0.9216\beta^2 = \left(\frac{v}{c}\right)^2 = (0.960)^2 = 0.9216

  2. 1−β2=1−0.9216=0.0784=0.280\sqrt{1 - \beta^2} = \sqrt{1 - 0.9216} = \sqrt{0.0784} = 0.280

  3. τ0=(7.50×10−6 s)×0.280=2.10×10−6 s\tau_0 = (7.50 \times 10^{-6}\text{ s}) \times 0.280 = 2.10 \times 10^{-6}\text{ s}

Final answer

τ0=2.10×10−6 s\tau_0 = 2.10 \times 10^{-6}\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the Lorentz factor with the squared ratio: γ=(1−v2c2)−1/2\gamma = \left(1 - \frac{v^2}{c^2}\right)^{-1/2}.

  • Use directional symmetry as a quick self-check: time dilation depends on speed, not velocity direction, so the formula must contain v2v^2 rather than vv.

OverviewACEpath Teacher's Diagnosis

03 The student uses a plus sign instead of a minus sign under the radical in the relativistic factor.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    τ0=Δt1+(vc)2\tau_0 = \Delta t \sqrt{1 + \left(\frac{v}{c}\right)^2}

    Correct

    τ0=Δt1−(vc)2\tau_0 = \Delta t \sqrt{1 - \left(\frac{v}{c}\right)^2}

    The Lorentz factor is defined as γ=11−(v/c)2\gamma = \frac{1}{\sqrt{1 - (v/c)^2}}. Solving Δt=γτ0\Delta t = \gamma \tau_0 for proper time yields τ0=Δt1−(v/c)2\tau_0 = \Delta t \sqrt{1 - (v/c)^2}, which has a minus sign under the radical, not an addition sign.

  2. Step 2

    τ\tau_0 = (7.50 ×\times 10^{-6} s\text{ s}) 1+0.9216\sqrt{1 + 0.9216}   ⟹  \implies τ\tau_0 = (7.50 ×\times 10^{-6} s\text{ s}) 1.9216\sqrt{1.9216}

    Correct

    τ\tau0 = (7.50 ×\times 10^{-6} s\text{ s}) 1−0.9216\sqrt{1 - 0.9216} = (7.50 ×\times 10^{-6} s\text{ s}) 0.0784\sqrt{0.0784}

    You substituted the numerical value of (v/c)2=(0.960)2=0.9216(v/c)^2 = (0.960)^2 = 0.9216 accurately, but the incorrect addition carried through to give 1.9216\sqrt{1.9216} instead of 0.0784\sqrt{0.0784}.

  3. Step 3

    τ\tau0 = (7.50 ×\times 10^{-6} s\text{ s})(1.386) = 1.04 ×\times 10^{-5} s\text{ s}

    Correct

    τ\tau0 = (7.50 ×\times 10^{-6} s\text{ s})(0.280) = 2.10 ×\times 10^{-6} s\text{ s}

    Your arithmetic on the expressions was executed correctly, but downstream of the sign error the final value is 1.04×10−5 s1.04 \times 10^{-5}\text{ s} rather than the correct 2.10×10−6 s2.10 \times 10^{-6}\text{ s}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the proper lifetime τ0\tau_0 is isolated by multiplying the dilated time Δt\Delta t by the reciprocal of the Lorentz factor.

You accurately squared the normalized velocity (0.960)2=0.9216(0.960)^2 = 0.9216.

You evaluated each subsequent arithmetic step cleanly and kept proper units.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error in relativistic factor

No, this stems from misremembering the Lorentz factor radical 1−β2\sqrt{1 - \beta^2} as 1+β2\sqrt{1 + \beta^2}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You wrote 1+(v/c)2\sqrt{1 + (v/c)^2} instead of 1−(v/c)2\sqrt{1 - (v/c)^2}. In special relativity, the interval invariance c2Δt2−Δx2c^2\Delta t^2 - \Delta x^2 enforces a subtraction under the radical so that γ≥1\gamma \ge 1, ensuring moving clocks run slow and proper time τ0\tau_0 is always strictly less than dilated time Δt\Delta t.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the sign under the Lorentz radical
  • The Lorentz factor is γ=11−β2\gamma = \frac{1}{\sqrt{1 - \beta^2}}, where β=vc<1\beta = \frac{v}{c} < 1.

  • Always verify that the radical contains a minus sign: 1−(v/c)2\sqrt{1 - (v/c)^2}.

Perform a physical magnitude sanity check
  • Proper time τ0\tau_0 is the shortest time interval between two co-local events; dilated time Δt\Delta t measured in another inertial frame is always longer (τ0≤Δt\tau_0 \le \Delta t).

  • Before writing your final answer, verify that τ0<Δt\tau_0 < \Delta t whenever v>0v > 0.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Rewrite the conversion using the correct Lorentz radical: τ0=Δt1−(vc)2\tau_0 = \Delta t \sqrt{1 - \left(\frac{v}{c}\right)^2}

  2. Substitute v/c=0.960v/c = 0.960: 1−(0.960)2=1−0.9216=0.07841 - (0.960)^2 = 1 - 0.9216 = 0.0784

  3. Take the square root: 0.0784=0.280\sqrt{0.0784} = 0.280

  4. Multiply by the dilated time: τ0=(7.50×10−6 s)(0.280)=2.10×10−6 s\tau_0 = (7.50 \times 10^{-6}\text{ s})(0.280) = 2.10 \times 10^{-6}\text{ s}

Final answer

τ0=2.10×10−6 s\tau_0 = 2.10 \times 10^{-6}\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the derivation of the Lorentz factor from the invariant spacetime interval c2Δt2−Δx2c^2\Delta t^2 - \Delta x^2.

  • Practice calculating 1−(v/c)2\sqrt{1 - (v/c)^2} for common relativistic speeds like 0.6c0.6c, 0.8c0.8c, and 0.96c0.96c.

  • Use the benchmark rule τ0<Δt\tau_0 < \Delta t to double-check every time-dilation result.

Lock it in

Similar question

01

A charged pion travels through a laboratory detector at speed v=0.800cv = 0.800c. If lab detectors record its lifetime as Δt=4.33×10−8 s\Delta t = 4.33 \times 10^{-8}\text{ s}, find the pion's proper lifetime τ0\tau_0.

Answer

τ0=2.60×10−8 s\tau_0 = 2.60 \times 10^{-8}\text{ s}. Step 1: Compute 1−(v/c)2=1−(0.800)2=0.600\sqrt{1-(v/c)^2} = \sqrt{1-(0.800)^2} = 0.600. Step 2: Use τ0=Δt1−(v/c)2=(4.33×10−8 s)×0.600=2.60×10−8 s\tau_0 = \Delta t \sqrt{1-(v/c)^2} = (4.33 \times 10^{-8}\text{ s}) \times 0.600 = 2.60 \times 10^{-8}\text{ s}.

02

A spacecraft moves away from Earth at v=0.990cv = 0.990c. An astronaut onboard times a biological experiment to take exactly τ0=1.50 hours\tau_0 = 1.50\text{ hours} in the ship frame. How long does mission control on Earth record for the experiment?

Answer

Δt=10.6 hours\Delta t = 10.6\text{ hours}. Step 1: Calculate γ=11−(0.990)2=10.0199≈7.089\gamma = \frac{1}{\sqrt{1-(0.990)^2}} = \frac{1}{\sqrt{0.0199}} \approx 7.089. Step 2: Since Earth measures dilated time, Δt=γτ0=7.089×1.50 hours≈10.6 hours\Delta t = \gamma \tau_0 = 7.089 \times 1.50\text{ hours} \approx 10.6\text{ hours}.

03

A neutral kaon has a known rest-frame proper lifetime of τ0=8.95×10−11 s\tau_0 = 8.95 \times 10^{-11}\text{ s}. In a collider facility, its observed decay length in the laboratory frame is d=12.0 cmd = 12.0\text{ cm}. Find the speed vv of the kaon as a fraction of cc.

Answer

v≈0.976cv \approx 0.976c. Step 1: Lab distance and lab time are related by d=vΔt=vγτ0d = v \Delta t = v \gamma \tau_0. Step 2: Substitute γ=1/1−β2\gamma = 1/\sqrt{1-\beta^2}, yielding β1−β2=dcτ0=0.120 m(3.00×108 m/s)(8.95×10−11 s)≈4.47\frac{\beta}{\sqrt{1-\beta^2}} = \frac{d}{c \tau_0} = \frac{0.120\text{ m}}{(3.00 \times 10^8\text{ m/s})(8.95 \times 10^{-11}\text{ s})} \approx 4.47. Step 3: Solve for β\beta: β2=4.4721+4.472≈0.952  ⟹  v≈0.976c\beta^2 = \frac{4.47^2}{1 + 4.47^2} \approx 0.952 \implies v \approx 0.976c.

Loading workspace…