Resources

A 0.300 kg0.300\text{ kg} cart on a frictionless track is attached to a horizontal spring with spring constant k=120 N/mk = 120\text{ N/m}. The cart is displaced by A=0.100 mA = 0.100\text{ m} from equilibrium and released from rest. At the instant the cart passes through equilibrium (x=0x = 0), it collides with and becomes permanently attached to a stationary blob of putty of mass mp=0.100 kgm_p = 0.100\text{ kg}. (a) Calculate the total mechanical energy of the system before the collision. (b) Determine the fraction of mechanical energy lost as thermal energy during the completely inelastic collision. (c) Find the new amplitude A2A_2 of the resulting simple harmonic motion.

Answer and steps

Final answer

(a) Initial mechanical energy E1=0.600 JE_1 = 0.600\text{ J}; (b) Fraction of mechanical energy lost is 25.0%25.0\% (0.2500.250, with 0.150 J0.150\text{ J} dissipated); (c) New amplitude A2=0.0866 mA_2 = 0.0866\text{ m}.

Steps

Part (a): Initial Mechanical Energy

In simple harmonic motion on a frictionless surface, the total mechanical energy is conserved and equals the maximum elastic potential energy stored in the spring at maximum displacement (x=Ax = A):

E1=12kA2E_1 = \frac{1}{2} k A^2

Substitute the given values into the equation:

E1=12(120 N/m)(0.100 m)2=0.600 JE_1 = \frac{1}{2}(120\text{ N/m})(0.100\text{ m})^2 = 0.600\text{ J}


Part (b): Fraction of Mechanical Energy Lost in the Collision

  1. Velocity right before collision: As the cart passes the equilibrium position (x=0x = 0), the spring is unstretched, so all mechanical energy is in the form of kinetic energy:

    E1=12mv12  ⟹  v1=2E1m=2(0.600 J)0.300 kg=2.00 m/sE_1 = \frac{1}{2} m v_1^2 \implies v_1 = \sqrt{\frac{2 E_1}{m}} = \sqrt{\frac{2(0.600\text{ J})}{0.300\text{ kg}}} = 2.00\text{ m/s}

  2. Velocity immediately after collision: During the instantaneous horizontal collision, the external horizontal spring force has negligible impulse, so linear momentum is conserved:

    mv1=(m+mp)v2m v_1 = (m + m_p) v_2

    v2=(mm+mp)v1=(0.300 kg0.300 kg+0.100 kg)(2.00 m/s)=1.50 m/sv_2 = \left(\frac{m}{m + m_p}\right) v_1 = \left(\frac{0.300\text{ kg}}{0.300\text{ kg} + 0.100\text{ kg}}\right)(2.00\text{ m/s}) = 1.50\text{ m/s}

  3. Kinetic energy after collision and energy lost: Because the collision occurs at x=0x = 0, the potential energy remains zero immediately after the impact:

    E2=12(m+mp)v22=12(0.400 kg)(1.50 m/s)2=0.450 JE_2 = \frac{1}{2}(m + m_p) v_2^2 = \frac{1}{2}(0.400\text{ kg})(1.50\text{ m/s})^2 = 0.450\text{ J}

    The thermal energy dissipated is:

    ΔElost=E1−E2=0.600 J−0.450 J=0.150 J\Delta E_{\text{lost}} = E_1 - E_2 = 0.600\text{ J} - 0.450\text{ J} = 0.150\text{ J}

    Therefore, the fraction of mechanical energy lost is:

    Fraction lost=ΔElostE1=0.150 J0.600 J=0.250=25.0%\text{Fraction lost} = \frac{\Delta E_{\text{lost}}}{E_1} = \frac{0.150\text{ J}}{0.600\text{ J}} = 0.250 = 25.0\%

Common Pitfall: Mechanical energy is not conserved during a completely inelastic collision. One must use conservation of momentum to find the velocity after impact, rather than equating kinetic energies before and after.


Part (c): New Amplitude of Oscillation

After the collision, the combined mass (m+mp)(m + m_p) continues in simple harmonic motion with conserved mechanical energy E2E_2. At the maximum displacement (x=A2x = A_2), the speed is instantaneously zero, and all energy is again stored in the spring:

E2=12kA22E_2 = \frac{1}{2} k A_2^2

Solve for A2A_2:

A2=2E2k=2(0.450 J)120 N/m=0.0075 m2≈0.0866 mA_2 = \sqrt{\frac{2 E_2}{k}} = \sqrt{\frac{2(0.450\text{ J})}{120\text{ N/m}}} = \sqrt{0.0075\text{ m}^2} \approx 0.0866\text{ m}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student assumes mechanical energy is conserved during the inelastic collision, concluding that no mechanical energy is lost and the amplitude is unchanged.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    E1=12kA2  ⟹  E1=0.5×120×(0.100)2=0.600 JE_1 = \frac{1}{2} k A^2 \implies E_1 = 0.5 \times 120 \times (0.100)^2 = 0.600\text{ J}

  2. Step 2

    Energy is conserved on a frictionless track, so E2=E1  ⟹  ΔE=0 J  ⟹  Fraction lost=00.600=0E_2 = E_1 \implies \Delta E = 0\text{ J} \implies \text{Fraction lost} = \frac{0}{0.600} = 0

    Correct

    Fraction lost=0.250 (or 25.0%)\text{Fraction lost} = 0.250\text{ (or } 25.0\%\text{)}

    Even on a frictionless track, a completely inelastic collision (where objects stick together) dissipates mechanical energy into thermal energy and internal deformation. You must use conservation of linear momentum during the impact (mv1=(m+mp)v2m v_1 = (m + m_p) v_2) to find the post-collision speed and kinetic energy.

  3. Step 3

    E2=12kA22=0.600 J  ⟹  A2=2×0.600120=0.100 mE_2 = \frac{1}{2} k A_2^2 = 0.600\text{ J} \implies A_2 = \sqrt{\frac{2 \times 0.600}{120}} = 0.100\text{ m}

    Correct

    A2=2E2k=2(0.450 J)120 N/m≈0.0866 mA_2 = \sqrt{\frac{2 E_2}{k}} = \sqrt{\frac{2(0.450\text{ J})}{120\text{ N/m}}} \approx 0.0866\text{ m}

    Your formula relating total energy to new amplitude is algebraically correct, but it carries over the incorrect value E2=0.600 JE_2 = 0.600\text{ J} from Step 2 instead of the true post-collision energy E2=0.450 JE_2 = 0.450\text{ J}.

WHAT YOU DID WELL
Compliments from Your Teacher

You used the correct expression for the total mechanical energy in terms of spring constant and amplitude.

You correctly related the new amplitude to the post-collision total mechanical energy.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inelastic collision energy misconception

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Assuming that mechanical energy is conserved during a completely inelastic collision simply because the track is frictionless, overlooking internal deformation and thermal energy generation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Collisions vs. Smooth Motion
  • Total momentum is conserved during any isolated collision, but mechanical energy is never conserved during a completely inelastic collision.

  • Always find the velocity immediately after an inelastic collision using m1v1=(m1+m2)v2m_1 v_1 = (m_1 + m_2) v_2 before computing mechanical energy.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find speed at equilibrium before collision: v1=2E1m=2(0.600)0.300=2.00 m/sv_1 = \sqrt{\frac{2 E_1}{m}} = \sqrt{\frac{2(0.600)}{0.300}} = 2.00\text{ m/s}.

  2. Apply conservation of linear momentum: (0.300)(2.00)=(0.300+0.100)v2  ⟹  v2=1.50 m/s(0.300)(2.00) = (0.300 + 0.100) v_2 \implies v_2 = 1.50\text{ m/s}.

  3. Calculate kinetic energy after collision: E2=12(0.400)(1.50)2=0.450 JE_2 = \frac{1}{2}(0.400)(1.50)^2 = 0.450\text{ J}.

  4. Determine fraction lost: E1−E2E1=0.600−0.4500.600=0.250=25.0%\frac{E_1 - E_2}{E_1} = \frac{0.600 - 0.450}{0.600} = 0.250 = 25.0\%.

  5. Calculate new amplitude: A2=2E2k=2(0.450)120=0.0075≈0.0866 mA_2 = \sqrt{\frac{2 E_2}{k}} = \sqrt{\frac{2(0.450)}{120}} = \sqrt{0.0075} \approx 0.0866\text{ m}.

Final answer

Fraction lost =25.0%= 25.0\%; New amplitude A2≈0.0866 mA_2 \approx 0.0866\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between elastic and inelastic collisions in oscillatory systems.

  • Practice separating the instantaneous impact phase (momentum conserved, mechanical energy dissipated) from the subsequent simple harmonic motion phase (mechanical energy conserved).

OverviewACEpath Teacher's Diagnosis

02 The student equates the lost mechanical energy directly to the ratio of the added mass to the original mass instead of applying momentum conservation to find the energy ratio.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    E1=12⋅120⋅(0.100)2=0.600 JE_1 = \frac{1}{2} \cdot 120 \cdot (0.100)^2 = 0.600\text{ J}

  2. Step 2

    Fraction lost=mpm=0.1000.300⟹Fraction lost=13≈0.333\text{Fraction lost} = \frac{m_p}{m} = \frac{0.100}{0.300} \Longrightarrow \text{Fraction lost} = \frac{1}{3} \approx 0.333

    Correct

    Fraction lost=mpm+mp=0.100 kg0.300 kg+0.100 kg=0.250 (or 25.0%)\text{Fraction lost} = \frac{m_p}{m + m_p} = \frac{0.100\text{ kg}}{0.300\text{ kg} + 0.100\text{ kg}} = 0.250\text{ (or } 25.0\%)

    You divided the putty mass by the cart mass rather than using momentum conservation. Because momentum is conserved during the instantaneous collision, mv1=(m+mp)v2m v_1 = (m + m_p) v_2, the remaining kinetic energy fraction is E2E1=mm+mp\frac{E_2}{E_1} = \frac{m}{m + m_p}, so the fraction lost is ΔEE1=1−mm+mp=mpm+mp=0.1000.400=0.250\frac{\Delta E}{E_1} = 1 - \frac{m}{m + m_p} = \frac{m_p}{m + m_p} = \frac{0.100}{0.400} = 0.250.

  3. Step 3

    E2=(1−13)⋅0.600=0.400 J⟹12⋅120⋅A22=0.400⟹A2=2⋅0.400120=0.00667=0.0816 mE_2 = \left(1 - \frac{1}{3}\right) \cdot 0.600 = 0.400\text{ J} \Longrightarrow \frac{1}{2} \cdot 120 \cdot A_2^2 = 0.400 \Longrightarrow A_2 = \sqrt{\frac{2 \cdot 0.400}{120}} = \sqrt{0.00667} = 0.0816\text{ m}

    Correct

    E2=(1−0.250)(0.600 J)=0.450 J⟹A2=2E2k=2(0.450 J)120 N/m=0.0075 m2≈0.0866 mE_2 = (1 - 0.250)(0.600\text{ J}) = 0.450\text{ J} \Longrightarrow A_2 = \sqrt{\frac{2 E_2}{k}} = \sqrt{\frac{2(0.450\text{ J})}{120\text{ N/m}}} = \sqrt{0.0075\text{ m}^2} \approx 0.0866\text{ m}

    Your method of equating the post-collision mechanical energy to 12kA22\frac{1}{2} k A_2^2 was completely correct, but your numerical answer was affected by the incorrect energy fraction from step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the elastic potential energy at maximum displacement to find the total initial energy.

You correctly understood that the post-collision energy determines the new maximum displacement via E2=12kA22E_2 = \frac{1}{2} k A_2^2.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inelastic collision energy ratio misconception

No, this is a conceptual misunderstanding about how kinetic energy loss is calculated in a completely inelastic collision.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that the fractional energy loss equals the mass ratio mpm\frac{m_p}{m}, forgetting that completely inelastic collisions require linear momentum conservation (p1=p2p_1 = p_2), which leads to a kinetic energy ratio of K2K1=mm+madded\frac{K_2}{K_1} = \frac{m}{m + m_{\text{added}}} and a fraction lost of maddedm+madded\frac{m_{\text{added}}}{m + m_{\text{added}}}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Conserve linear momentum across the collision
  • External spring forces are negligible during an instantaneous impact, so pafter=pbefore=pp_{\text{after}} = p_{\text{before}} = p.

  • Express kinetic energy as K=p22MK = \frac{p^2}{2M} to relate kinetic energies before and after the collision directly.

Compute fractional energy lost
  • Since K2=p22(m+mp)K_2 = \frac{p^2}{2(m + m_p)} and K1=p22mK_1 = \frac{p^2}{2m}, the ratio is K2K1=mm+mp\frac{K_2}{K_1} = \frac{m}{m + m_p}.

  • Calculate the lost fraction as 1−K2K1=mpm+mp1 - \frac{K_2}{K_1} = \frac{m_p}{m + m_p}, with the total mass in the denominator.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply conservation of linear momentum at x=0x = 0: mv1=(m+mp)v2m v_1 = (m + m_p) v_2.

  2. Express the remaining kinetic energy as E2=12(m+mp)v22=mm+mpE1=0.3000.400(0.600 J)=0.450 JE_2 = \frac{1}{2}(m + m_p)v_2^2 = \frac{m}{m + m_p} E_1 = \frac{0.300}{0.400}(0.600\text{ J}) = 0.450\text{ J}.

  3. Calculate the fraction of energy lost: E1−E2E1=1−0.750=0.250\frac{E_1 - E_2}{E_1} = 1 - 0.750 = 0.250 (25.0%25.0\%).

  4. Solve for the new amplitude: 12kA22=E2  ⟹  A2=2(0.450 J)120 N/m=0.0075 m2≈0.0866 m\frac{1}{2} k A_2^2 = E_2 \implies A_2 = \sqrt{\frac{2(0.450\text{ J})}{120\text{ N/m}}} = \sqrt{0.0075\text{ m}^2} \approx 0.0866\text{ m}.

Final answer

(a) 0.600 J0.600\text{ J}; (b) 0.2500.250 (25.0%25.0\%); (c) 0.0866 m0.0866\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the relationship between linear momentum and kinetic energy: K=p22mK = \frac{p^2}{2m}.

  • Practice deriving fractional energy loss for completely inelastic collisions using ΔKK1=mtargetmbullet+mtarget\frac{\Delta K}{K_1} = \frac{m_{\text{target}}}{m_{\text{bullet}} + m_{\text{target}}}.

  • Solve problems where mass is added at equilibrium versus at the maximum displacement point to see how collision location affects energy loss.

OverviewACEpath Teacher's Diagnosis

03 The student assumes that the ratio of amplitudes scales linearly with the velocity ratio rather than scaling with the square root of mechanical energy.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    E1=12⋅120⋅0.1002=0.600 JE_1 = \frac{1}{2} \cdot 120 \cdot 0.100^2 = 0.600\text{ J}

  2. Step 2

    v1=2⋅0.6000.300=2.00 m/s  ⟹  0.300⋅2.00=0.400⋅v2  ⟹  v2=1.50 m/s  ⟹  E2=12⋅0.400⋅1.502=0.450 J  ⟹  Fraction lost=0.600−0.4500.600=0.250v_1 = \sqrt{\frac{2 \cdot 0.600}{0.300}} = 2.00\text{ m/s} \implies 0.300 \cdot 2.00 = 0.400 \cdot v_2 \implies v_2 = 1.50\text{ m/s} \implies E_2 = \frac{1}{2} \cdot 0.400 \cdot 1.50^2 = 0.450\text{ J} \implies \text{Fraction lost} = \frac{0.600 - 0.450}{0.600} = 0.250

  3. Step 3

    A2A=v2v1  ⟹  A2=0.100⋅(1.502.00)=0.0750 m\frac{A_2}{A} = \frac{v_2}{v_1} \implies A_2 = 0.100 \cdot \left(\frac{1.50}{2.00}\right) = 0.0750\text{ m}

    Correct

    E2=12kA22  ⟹  A2=2E2k=2(0.450 J)120 N/m≈0.0866 mE_2 = \frac{1}{2}kA_2^2 \implies A_2 = \sqrt{\frac{2E_2}{k}} = \sqrt{\frac{2(0.450\text{ J})}{120\text{ N/m}}} \approx 0.0866\text{ m}

    You assumed that vmax⁡∝Av_{\max} \propto A with a constant proportionality factor, but vmax⁡=ωAv_{\max} = \omega A and ω=k/m\omega = \sqrt{k/m}. Because the total mass increased from 0.300 kg0.300\text{ kg} to 0.400 kg0.400\text{ kg}, the angular frequency ω\omega changed after the collision. The new amplitude must be found from the post-collision mechanical energy E2=12kA22E_2 = \frac{1}{2}kA_2^2 (or by accounting for the change in ω\omega).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the initial energy stored in the spring before release.

You recognized that mechanical energy is not conserved during the completely inelastic collision and properly used conservation of linear momentum.

You calculated the post-collision kinetic energy and the energy loss fraction with complete accuracy.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Neglecting frequency change when relating velocity to amplitude in SHM

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You used the linear scaling relation A2/A1=v2/v1A_2/A_1 = v_2/v_1, which only holds if the natural frequency ω\omega remains constant. Because mass was added, ω=k/m\omega = \sqrt{k/m} decreased, meaning a given speed at equilibrium corresponds to a larger amplitude than it would with the original mass.

REASONING PATH
Your ACEpath teacher’s suggested approach
Energy-Amplitude Relation in SHM
  • For a spring-mass oscillator, total mechanical energy is related to amplitude solely by E=12kA2E = \frac{1}{2}kA^2, independent of the mass.

  • Whenever you know the total mechanical energy EE after a perturbation and the spring constant kk is unchanged, solve directly for A=2E/kA = \sqrt{2E/k}.

Velocity-Amplitude Relation with Varying Mass
  • At equilibrium, vmax⁡=ωA=kmAv_{\max} = \omega A = \sqrt{\frac{k}{m}}A, so A=vmax⁡mkA = v_{\max}\sqrt{\frac{m}{k}}.

  • If relating amplitudes through maximum velocities, remember to include the mass ratio factor: A2/A1=(v2/v1)m2/m1A_2/A_1 = (v_2/v_1)\sqrt{m_2/m_1}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall that immediately after the collision at x=0x = 0, all remaining mechanical energy is kinetic energy: E2=0.450 JE_2 = 0.450\text{ J}.

  2. As the combined mass oscillates to its new turning point x=A2x = A_2, all mechanical energy transforms back into spring potential energy: E2=12kA22E_2 = \frac{1}{2}kA_2^2.

  3. Solve for A2A_2: A2=2E2k=2(0.450 J)120 N/m=0.0075 m2≈0.0866 mA_2 = \sqrt{\frac{2E_2}{k}} = \sqrt{\frac{2(0.450\text{ J})}{120\text{ N/m}}} = \sqrt{0.0075\text{ m}^2} \approx 0.0866\text{ m}.

Final answer

A2=320 m≈0.0866 mA_2 = \frac{\sqrt{3}}{20}\text{ m} \approx 0.0866\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how angular frequency ω=k/m\omega = \sqrt{k/m} depends on mass.

  • Practice solving for SHM amplitude directly from total energy E=12kA2E = \frac{1}{2}kA^2 rather than scaling from velocity.

Lock it in

Similar question

01

A 0.200 kg0.200\text{ kg} block oscillates on a frictionless horizontal spring (k=80.0 N/mk = 80.0\text{ N/m}) with an initial amplitude of 0.050 m0.050\text{ m}. At the center of oscillation (x=0x = 0), a 0.200 kg0.200\text{ kg} piece of clay falls vertically onto the block and sticks to it. Determine the new amplitude of oscillation.

Answer

A2≈0.0354 mA_2 \approx 0.0354\text{ m} (or 0.0502 m\frac{0.050}{\sqrt{2}}\text{ m}). At x=0x=0, speed v1=Ak/m=0.050400=1.00 m/sv_1 = A\sqrt{k/m} = 0.050\sqrt{400} = 1.00\text{ m/s}. By horizontal momentum conservation, v2=0.2000.400(1.00)=0.500 m/sv_2 = \frac{0.200}{0.400}(1.00) = 0.500\text{ m/s}. The new energy is E2=12(0.400)(0.500)2=0.050 JE_2 = \frac{1}{2}(0.400)(0.500)^2 = 0.050\text{ J}. Then A2=2(0.050)80.0=0.00125≈0.0354 mA_2 = \sqrt{\frac{2(0.050)}{80.0}} = \sqrt{0.00125} \approx 0.0354\text{ m}.

02

A cart of mass MM attached to a horizontal spring oscillates with amplitude A0A_0. At the instant it passes equilibrium, a mass mm drops onto it and sticks. Express the ratio of the new mechanical energy to the original mechanical energy, Enew/EorigE_{\text{new}} / E_{\text{orig}}, in terms of MM and mm.

Answer

EnewEorig=MM+m\frac{E_{\text{new}}}{E_{\text{orig}}} = \frac{M}{M + m}. At equilibrium, all energy is kinetic: Eorig=12Mv02E_{\text{orig}} = \frac{1}{2} M v_0^2. By conservation of horizontal momentum, vnew=(MM+m)v0v_{\text{new}} = \left(\frac{M}{M+m}\right) v_0. Thus Enew=12(M+m)vnew2=12(M+m)(MM+m)2v02=(MM+m)EorigE_{\text{new}} = \frac{1}{2}(M+m)v_{\text{new}}^2 = \frac{1}{2}(M+m)\left(\frac{M}{M+m}\right)^2 v_0^2 = \left(\frac{M}{M+m}\right) E_{\text{orig}}.

03

A mass m1=0.500 kgm_1 = 0.500\text{ kg} is attached to a spring (k=200 N/mk = 200\text{ N/m}) and oscillates on a frictionless surface with amplitude A1=0.120 mA_1 = 0.120\text{ m}. At x=+0.060 mx = +0.060\text{ m} (moving to the right), it collides with and sticks to a stationary blob of mass m2=0.250 kgm_2 = 0.250\text{ kg}. Find the new amplitude A2A_2 of the oscillation.

Answer

A2≈0.104 mA_2 \approx 0.104\text{ m}. Total initial energy E1=12(200)(0.120)2=1.44 JE_1 = \frac{1}{2}(200)(0.120)^2 = 1.44\text{ J}. At x=0.060 mx = 0.060\text{ m}, potential energy U=12(200)(0.060)2=0.360 JU = \frac{1}{2}(200)(0.060)^2 = 0.360\text{ J}, so kinetic energy K1=1.44−0.360=1.08 JK_1 = 1.44 - 0.360 = 1.08\text{ J}, giving speed v1=2(1.08)0.500=2.078 m/sv_1 = \sqrt{\frac{2(1.08)}{0.500}} = 2.078\text{ m/s}. By momentum conservation, v2=0.5000.750v1=1.386 m/sv_2 = \frac{0.500}{0.750} v_1 = 1.386\text{ m/s}. Post-collision kinetic energy K2=12(0.750)(1.386)2=0.720 JK_2 = \frac{1}{2}(0.750)(1.386)^2 = 0.720\text{ J}. Total post-collision energy E2=K2+U=0.720+0.360=1.08 JE_2 = K_2 + U = 0.720 + 0.360 = 1.08\text{ J}. Finally, A2=2(1.08)200=0.0108≈0.104 mA_2 = \sqrt{\frac{2(1.08)}{200}} = \sqrt{0.0108} \approx 0.104\text{ m}.

Loading workspace…