Resources
A laser beam with a free-space wavelength of is incident from vacuum () onto a transparent optical polymer at an angle of incidence . In the polymer, the wavelength of the light is compressed to , and the phase speed decreases accordingly. Calculate the angle of refraction of the beam inside the polymer.
Answer and steps
Final answer
Steps
Step 1: Determine the refractive index of the optical polymer
When light travels from one medium to another, its frequency remains unchanged because it is determined by the source. Consequently, the change in phase speed directly changes the wavelength of the light:
The index of refraction of the polymer is the ratio of the speed of light in vacuum to the speed of light in the medium :
Substitute the given values for the wavelengths:
Step 2: Apply Snell's Law to find the angle of refraction
Snell's Law of refraction relates the indices of refraction and angles with respect to the normal line at the boundary:
Where:
- (vacuum)
- (angle of incidence)
- (optical polymer)
- is the angle of refraction
Rearrange the equation to solve for :
Substitute the values:
Step 3: Calculate
Take the inverse sine to find the angle inside the polymer:
(Note: Always ensure angles in Snell's Law are measured relative to the normal to the boundary, not the interface itself.)
Typical errors
01 The student inverts the ratio of wavelengths when computing the index of refraction, setting n = λ / λ₀ instead of λ₀ / λ.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You inverted the ratio of wavelengths. Because the speed of light in a material medium is less than in vacuum (), the index of refraction is defined as , which must be greater than for transparent matter.
- Step 2Correct
Your formulation and algebraic rearrangement of Snell's Law were correct, but this step was affected by substituting the incorrect value .
- Step 3Correct
You correctly computed the inverse sine of your calculated ratio, but the resulting angle was propagated from the incorrect refractive index.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recalled and set up Snell's Law ().
You correctly rearranged the equation to isolate and accurately evaluated the inverse sine function.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou placed the medium wavelength in the numerator and the vacuum wavelength in the denominator.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou confused the relationship between wavelength and refractive index, overlooking the fundamental definition that , which always yields for ordinary optical media.
REASONING PATH
Your ACEpath teacher’s suggested approach- Refractive Index Definition
The index of refraction of a medium is , comparing vacuum values to medium values.
Always place the vacuum wavelength (the larger wavelength) in the numerator so that .
- Physical Sanity Check
Light bends toward the normal line () when entering a denser medium from vacuum.
Check that your calculated index satisfies and that before finalizing your answer.
CORRECTED PATH
ACEpath Teacher's Demonstration02 The student directly equates the ratio of angles to the ratio of refractive indices instead of using the sine function in Snell's law.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Snell's law relates the sines of the angles to the normal, not the angles themselves directly. The small-angle approximation does not apply accurately at .
- Step 3Correct
Because the sine function was omitted in the previous step, solving for the angle led to an incorrect numerical value.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly found the refractive index of the optical polymer by comparing the vacuum wavelength to the compressed wavelength.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou omitted the sine function in Snell's law, assuming the angles are directly proportional to the refractive indices () rather than their sines ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Formulate Snell's Law
The exact law of refraction at any interface is .
Always write Snell's law with the sine function before substituting numerical angle values.
- Applicability of Small-Angle Approximation
The approximation (in radians) is only valid for very small angles (typically ).
Do not treat and as interchangeable for macroscopic angles like .
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite Snell's law in its exact trigonometric form: .
Substitute the known values: .
Evaluate the sine term: .
Take the inverse sine: .
03 The student sets up Snell's law with the indices inverted across the interface, calculating sin(θ₂) = n₂ sin(θ₁) / n₁.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Snell's Law is . Dividing both sides by yields , so the index ratio should be , not .
- Step 3Correct
You accurately evaluated the inverse sine for your value, but the result is incorrect because of the inverted ratio in the previous step.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the relationship to find the refractive index of the optical polymer.
You correctly evaluated the inverse sine function to find the final angle from your intermediate sine value.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou swapped and in the numerator and denominator when isolating .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisMisremembering or algebraically misarranging Snell's Law (). When light enters an optically denser medium (), the ray must bend toward the normal, meaning . A calculated angle of indicates bending away from the normal, which serves as a physical check that the ratio was inverted.
REASONING PATH
Your ACEpath teacher’s suggested approach- State Snell's Law before rearranging
Always write down the symmetric product form before dividing to isolate the unknown term.
- Perform a qualitative ray-bending check
If , the light slows down and bends toward the normal, so .
Check whether your result satisfies when entering a denser medium; if , verify that your index ratio is not inverted.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite Snell's Law in standard product form: .
Isolate : .
Take the inverse sine: .
Lock it in
How is the refractive index of a medium related to the light's wavelength in vacuum and in the medium ?
. Since light slows down in a medium () while frequency remains constant, , ensuring .
Similar question
A green laser has a wavelength of in vacuum. Upon entering a liquid, its wavelength decreases to . Find the refractive index of the liquid and the speed of light in this liquid (use ).
Answer
, . Key steps: . Then .
Light of vacuum wavelength strikes a diamond surface at an incident angle of from air (). Inside the diamond, the wavelength is measured to be . Calculate the angle of refraction inside the diamond.
Answer
. Key steps: Calculate . Apply Snell's Law: . Thus, .
A light beam traveling in water () enters a crown glass block at an angle of incidence . If the wavelength in water is and the wavelength in the glass is , determine the angle of refraction in the glass.
Answer
. Key steps: Use the wavelength ratio directly in Snell's Law: . Substitute values: . Thus, .