Resources

A student drops an ice cube of mass 0.0500 kg0.0500\text{ kg} at 0.0∘C0.0^\circ\text{C} into 0.200 kg0.200\text{ kg} of water held at 18.0∘C18.0^\circ\text{C} inside an ideal calorimeter. Because the warm water lacks sufficient thermal energy to melt the entire ice cube, the system reaches a final equilibrium state at 0.0∘C0.0^\circ\text{C} containing a mixture of ice and liquid water. Calculate the percentage of the original ice cube's mass that has melted at equilibrium. Take cwater=4186 J/(kg⋅∘C)c_\text{water} = 4186\text{ J}/(\text{kg}\cdot^\circ\text{C}) and Lf=3.33×105 J/kgL_f = 3.33 \times 10^5\text{ J}/\text{kg}.

Answer and steps

Final answer

90.5%90.5\%

Steps

01

Calculate the heat released by the cooling water

To find the percentage of the ice cube that melts, we apply the principle of conservation of energy in an isolated system: the heat lost by the cooling warm water must equal the heat gained by the melting ice.

The warm water cools from its initial temperature of Ti=18.0∘CT_i = 18.0^\circ\text{C} to the final thermal equilibrium temperature of Tf=0.0∘CT_f = 0.0^\circ\text{C}. The heat released (QlostQ_{\text{lost}}) is given by: Qlost=mwcwaterΔTQ_{\text{lost}} = m_w c_{\text{water}} \Delta T

Substituting the given values: Qlost=0.200 kg⋅4186 J/(kg⋅∘C)⋅(18.0∘C−0.0∘C)Q_{\text{lost}} = 0.200\text{ kg} \cdot 4186\text{ J}/(\text{kg}\cdot^\circ\text{C}) \cdot (18.0^\circ\text{C} - 0.0^\circ\text{C}) Qlost=0.200⋅4186⋅18.0=15069.6 JQ_{\text{lost}} = 0.200 \cdot 4186 \cdot 18.0 = 15069.6\text{ J}

02

Calculate the mass of ice melted

Because the ice is already at its melting point (0.0∘C0.0^\circ\text{C}), any energy it absorbs goes entirely into changing its phase from solid to liquid at a constant temperature. The heat absorbed to melt a mass mmeltedm_{\text{melted}} is: Qgained=mmeltedLfQ_{\text{gained}} = m_{\text{melted}} L_f

Setting Qgained=QlostQ_{\text{gained}} = Q_{\text{lost}}: mmeltedLf=15069.6 Jm_{\text{melted}} L_f = 15069.6\text{ J} mmelted=15069.6 J3.33×105 J/kg≈0.045254 kgm_{\text{melted}} = \frac{15069.6\text{ J}}{3.33 \times 10^5\text{ J}/\text{kg}} \approx 0.045254\text{ kg}

(Common Pitfall: Do not assume the entire ice cube melts. Always check if Qlost<miceLfQ_{\text{lost}} < m_{\text{ice}} L_f. Here, melting all 0.0500 kg0.0500\text{ kg} would require 0.0500⋅3.33×105=16650 J0.0500 \cdot 3.33 \times 10^5 = 16650\text{ J}, which exceeds the available 15069.6 J15069.6\text{ J}.)

03

Determine the percentage of melted ice

Now, compare the mass melted to the initial mass of the ice cube (mice=0.0500 kgm_{\text{ice}} = 0.0500\text{ kg}): Percentage melted=mmeltedmice×100%\text{Percentage melted} = \frac{m_{\text{melted}}}{m_{\text{ice}}} \times 100\% Percentage melted=0.045254 kg0.0500 kg×100%≈90.5%\text{Percentage melted} = \frac{0.045254\text{ kg}}{0.0500\text{ kg}} \times 100\% \approx 90.5\%

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student divides the melted mass of ice by the mass of the warm water instead of the original mass of the ice cube when computing the percentage, obtaining 22.6%.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Qreleased=0.200×4186×18.0=15069.6 JQ_{\text{released}} = 0.200 \times 4186 \times 18.0 = 15069.6\text{ J}

  2. Step 2

    mmelted=15069.6/(3.33×105)=0.04525 kgm_{\text{melted}} = 15069.6 / (3.33 \times 10^5) = 0.04525\text{ kg}

  3. Step 3

    Percentage melted=(0.04525/0.200)×100%=22.6%\text{Percentage melted} = (0.04525 / 0.200) \times 100\% = 22.6\%

    Correct

    Percentage melted=mmeltedmice×100%=0.04525 kg0.0500 kg×100%≈90.5%\text{Percentage melted} = \frac{m_{\text{melted}}}{m_{\text{ice}}} \times 100\% = \frac{0.04525\text{ kg}}{0.0500\text{ kg}} \times 100\% \approx 90.5\%

    You divided by the mass of the surrounding water (0.200 kg0.200\text{ kg}) rather than the total initial mass of the ice cube (0.0500 kg0.0500\text{ kg}). The question asked for the percentage of the ice cube that melted.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the heat transfer equation Q=mcΔTQ = mc\Delta T to compute the heat released by the cooling water.

You correctly related latent heat of fusion to the melted mass using Q=mLfQ = mL_f.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Denominator confusion in percentage calculation

You used the water's initial mass in the denominator instead of the ice cube's initial mass.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When multiple masses are present in a calorimetry problem, it is easy to pick the larger or first-listed mass for a percentage calculation rather than the specific reference mass specified by the prompt.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify the reference base for percentages
  • In any phrase of the form 'percentage of XX', the denominator must always be the initial total quantity of XX.

  • Always write the definition with symbolic subscripts first, such as mmeltedmice, total\frac{m_{\text{melted}}}{m_{\text{ice, total}}}, before substituting numerical values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the target ratio using clear labels: Fraction melted=mmeltedmice\text{Fraction melted} = \frac{m_{\text{melted}}}{m_{\text{ice}}}.

  2. Substitute the melted mass and the initial ice mass: 0.045254 kg0.0500 kg≈0.9051\frac{0.045254\text{ kg}}{0.0500\text{ kg}} \approx 0.9051.

  3. Convert to a percentage: 0.9051×100%=90.5%0.9051 \times 100\% = 90.5\%.

Final answer

90.5%90.5\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write symbolic labels with clear subscripts (e.g., micem_{\text{ice}} vs. mwm_w) before inserting numbers.

  • Check whether the resulting percentage aligns with your physical intuition: an ice cube of 0.0500 kg0.0500\text{ kg} losing 0.04525 kg0.04525\text{ kg} is nearly entirely melted, so the final percentage must be around 90%90\%, not 23%23\%.

OverviewACEpath Teacher's Diagnosis

02 The student uses the total mass of the system instead of the original ice mass in the denominator when calculating the percentage melted, arriving at 18.1%.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Qwater=0.200∗4186∗(18.0−0.0)=15069.6 JQ_{\text{water}} = 0.200 * 4186 * (18.0 - 0.0) = 15069.6\text{ J}

  2. Step 2

    mmelted=15069.6/(3.33∗105)=0.04525 kgm_{\text{melted}} = 15069.6 / (3.33 * 10^5) = 0.04525\text{ kg}

  3. Step 3

    mtotal=0.0500+0.200=0.250 kgm_{\text{total}} = 0.0500 + 0.200 = 0.250\text{ kg}

    Correct

    mice=0.0500 kgm_{\text{ice}} = 0.0500\text{ kg}

    You calculated the total mass of the entire mixture (0.250 kg0.250\text{ kg}). However, the question asks for the percentage of the original ice cube's mass that melted, so the reference denominator must be the initial ice mass (0.0500 kg0.0500\text{ kg}).

  4. Step 4

    Percentage=(0.04525/0.250)∗100%=18.1%\text{Percentage} = (0.04525 / 0.250) * 100\% = 18.1\%

    Correct

    Percentage=mmeltedmice×100%=0.045254 kg0.0500 kg×100%≈90.5%\text{Percentage} = \frac{m_{\text{melted}}}{m_{\text{ice}}} \times 100\% = \frac{0.045254\text{ kg}}{0.0500\text{ kg}} \times 100\% \approx 90.5\%

    Your arithmetic was accurate based on your total mass from Step 3, but the final answer is incorrect due to dividing by the wrong reference quantity.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used Q=mcΔTQ = mc\Delta T to compute the thermal energy released by the water.

You correctly recognized that the phase change occurs at constant temperature and solved for the melted mass using LfL_f.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect Reference Base in Percentage Calculation

Dividing the melted mass by the combined mass of the water and ice instead of the original ice mass.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the whole system with the specific reference object. The prompt asks for the 'percentage of the original ice cube's mass', meaning the initial ice mass alone (0.0500 kg0.0500\text{ kg}) is the 100%100\% base.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify the Reference Quantity
  • In any percentage calculation of the form 'percentage of XX', quantity XX is the reference base and must be placed in the denominator.

  • Locate the noun following 'percentage of' in the problem statement and set that exact initial value as the denominator: Percentage=mmeltedmice×100%\text{Percentage} = \frac{m_{\text{melted}}}{m_{\text{ice}}} \times 100\%.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the target reference mass from the prompt: the initial mass of the ice cube is mice=0.0500 kgm_{\text{ice}} = 0.0500\text{ kg}.

  2. Divide the melted mass by the initial ice cube mass: 0.045254 kg0.0500 kg≈0.9051\frac{0.045254\text{ kg}}{0.0500\text{ kg}} \approx 0.9051.

  3. Multiply by 100%100\% to obtain the final percentage: 0.9051×100%≈90.5%0.9051 \times 100\% \approx 90.5\%.

Final answer

90.5%90.5\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Underline the words 'percentage of [object]' in the question before setting up your final ratio to ensure you pick the correct denominator.

  • Run a quick magnitude check: since 0.04525 kg0.04525\text{ kg} is most of the 0.0500 kg0.0500\text{ kg} ice cube, the percentage melted should be near 90%90\%, which immediately alerts you that 18.1%18.1\% is too small.

OverviewACEpath Teacher's Diagnosis

03 The student incorrectly multiplies the heat of fusion by temperature change as if it were a specific heat capacity, leading to an incorrect melted mass calculation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Qlost=0.200×4186×18.0=15069.6 JQ_{\text{lost}} = 0.200 \times 4186 \times 18.0 = 15069.6\text{ J}

  2. Step 2

    Qabsorbed=mmelted×3.33×105×18.0  ⟹  mmelted=15069.63.33×105×18.0=0.00251 kgQ_{\text{absorbed}} = m_{\text{melted}} \times 3.33 \times 10^5 \times 18.0 \implies m_{\text{melted}} = \frac{15069.6}{3.33 \times 10^5 \times 18.0} = 0.00251\text{ kg}

    Correct

    Qabsorbed=mmeltedLf  ⟹  mmelted=15069.63.33×105≈0.04525 kgQ_{\text{absorbed}} = m_{\text{melted}} L_f \implies m_{\text{melted}} = \frac{15069.6}{3.33 \times 10^5} \approx 0.04525\text{ kg}

    You multiplied by ΔT=18.0∘C\Delta T = 18.0^\circ\text{C} in the latent heat formula. Melting ice at 0.0∘C0.0^\circ\text{C} into liquid water at 0.0∘C0.0^\circ\text{C} is an isothermal phase change governed by Q=mLfQ = m L_f, which does not include a temperature change term.

  3. Step 3

    Percentage melted=(0.002510.0500)×100%=5.0%\text{Percentage melted} = \left(\frac{0.00251}{0.0500}\right) \times 100\% = 5.0\%

    Correct

    Percentage melted=(0.045250.0500)×100%≈90.5%\text{Percentage melted} = \left(\frac{0.04525}{0.0500}\right) \times 100\% \approx 90.5\%

    Your formula for the percentage of melted mass was set up properly, but the result was affected by the incorrect value of mmeltedm_{\text{melted}} from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied conservation of energy by setting heat lost equal to heat absorbed.

You accurately calculated the thermal energy released by the water using Q=mcΔTQ = mc\Delta T.

You correctly set up the ratio of melted mass to original ice mass.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Latent heat multiplied by temperature change

You treated the latent heat of fusion LfL_f as if it were a specific heat capacity by multiplying it by ΔT=18.0∘C\Delta T = 18.0^\circ\text{C}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating sensible heat transfer (Q=mcΔTQ = mc\Delta T), which causes a temperature change without a phase change, with latent heat transfer (Q=mLQ = mL), which causes a phase change at constant temperature.

REASONING PATH
Your ACEpath teacher’s suggested approach
Distinguish Sensible Heat from Latent Heat
  • Use Q=mcΔTQ = mc\Delta T when an object changes temperature within a single phase. Use Q=mLQ = mL when a substance changes phase at its transition temperature.

  • Check whether the process changes temperature or changes state; never multiply latent heat LL by ΔT\Delta T.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the heat gained by melting equal to the heat lost: mmeltedLf=15069.6 Jm_{\text{melted}} L_f = 15069.6\text{ J}.

  2. Solve for the mass melted: mmelted=15069.6 J3.33×105 J/kg≈0.045254 kgm_{\text{melted}} = \frac{15069.6\text{ J}}{3.33 \times 10^5\text{ J}/\text{kg}} \approx 0.045254\text{ kg}.

  3. Calculate the percentage melted: 0.045254 kg0.0500 kg×100%≈90.5%\frac{0.045254\text{ kg}}{0.0500\text{ kg}} \times 100\% \approx 90.5\%.

Final answer

90.5%90.5\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the fundamental difference in SI units between specific heat capacity (J/(kg⋅∘C)\text{J}/(\text{kg}\cdot^\circ\text{C})) and latent heat (J/kg\text{J}/\text{kg}).

  • Practice identifying isothermal steps on heating/cooling curves where temperature remains horizontal while heat is absorbed.

Lock it in

Similar question

01

An ice cube of mass 0.0800 kg0.0800\text{ kg} at 0.0∘C0.0^\circ\text{C} is placed into 0.300 kg0.300\text{ kg} of water at 10.0∘C10.0^\circ\text{C}. The mixture reaches equilibrium at 0.0∘C0.0^\circ\text{C}. What percentage of the ice cube's mass melts? Take cw=4186 J/(kg⋅∘C)c_w = 4186\text{ J}/(\text{kg}\cdot^\circ\text{C}) and Lf=3.33×105 J/kgL_f = 3.33 \times 10^5\text{ J}/\text{kg}.

Answer

47.2%47.2\%.

  1. Heat released: Q=0.300×4186×10.0=12558 JQ = 0.300 \times 4186 \times 10.0 = 12558\text{ J}.
  2. Ice melted: mmelted=125583.33×105≈0.03771 kgm_{\text{melted}} = \frac{12558}{3.33 \times 10^5} \approx 0.03771\text{ kg}.
  3. Percentage melted: 0.03771 kg0.0800 kg×100%≈47.2%\frac{0.03771\text{ kg}}{0.0800\text{ kg}} \times 100\% \approx 47.2\%.
02

A 0.120 kg0.120\text{ kg} block of ice at 0.0∘C0.0^\circ\text{C} is dropped into warm liquid of mass 0.400 kg0.400\text{ kg} and specific heat 2500 J/(kg⋅∘C)2500\text{ J}/(\text{kg}\cdot^\circ\text{C}) at 24.0∘C24.0^\circ\text{C}. If the mixture reaches equilibrium at 0.0∘C0.0^\circ\text{C}, what percentage of the initial ice remains unmelted? Take Lf=3.33×105 J/kgL_f = 3.33 \times 10^5\text{ J}/\text{kg}.

Answer

40.0%40.0\% remaining.

  1. Heat released: Q=0.400×2500×24.0=24000 JQ = 0.400 \times 2500 \times 24.0 = 24000\text{ J}.
  2. Ice melted: mmelted=240003.33×105≈0.07207 kgm_{\text{melted}} = \frac{24000}{3.33 \times 10^5} \approx 0.07207\text{ kg}.
  3. Mass remaining: 0.120 kg−0.07207 kg=0.04793 kg0.120\text{ kg} - 0.07207\text{ kg} = 0.04793\text{ kg}.
  4. Percentage remaining: 0.047930.120×100%≈40.0%\frac{0.04793}{0.120} \times 100\% \approx 40.0\%.
03

An ice cube of mass MM at −10.0∘C-10.0^\circ\text{C} is placed in water of mass 3M3M at 20.0∘C20.0^\circ\text{C}. Given cice=2090 J/(kg⋅∘C)c_{\text{ice}} = 2090\text{ J}/(\text{kg}\cdot^\circ\text{C}), cw=4186 J/(kg⋅∘C)c_w = 4186\text{ J}/(\text{kg}\cdot^\circ\text{C}), and Lf=3.33×105 J/kgL_f = 3.33 \times 10^5\text{ J}/\text{kg}, find the percentage of the ice cube that melts once thermal equilibrium is reached at 0.0∘C0.0^\circ\text{C}.

Answer

69.1%69.1\%.

  1. Heat released by water cooling to 0∘C0^\circ\text{C}: Qlost=3M×4186×20.0=251160M JQ_{\text{lost}} = 3M \times 4186 \times 20.0 = 251160 M\text{ J}.
  2. Heat needed to warm ice to 0∘C0^\circ\text{C}: Qwarm=M×2090×10.0=20900M JQ_{\text{warm}} = M \times 2090 \times 10.0 = 20900 M\text{ J}.
  3. Net heat available for melting: Qnet=251160M−20900M=230260M JQ_{\text{net}} = 251160 M - 20900 M = 230260 M\text{ J}.
  4. Mass melted: mmelted=230260M3.33×105≈0.6915Mm_{\text{melted}} = \frac{230260 M}{3.33 \times 10^5} \approx 0.6915 M.
  5. Percentage of ice melted: mmeltedM×100%≈69.1%\frac{m_{\text{melted}}}{M} \times 100\% \approx 69.1\%.
Loading workspace…