Resources
A light ray propagates inside an optical crystal of high refractive index toward a planar boundary with a surrounding gas of refractive index , where . In the asymptotic limit where the crystal's refractive index becomes extremely large (), determine (a) the limiting value of the critical angle , and (b) for a specific high-index semiconductor with (germanium in the infrared) bounded by air (), compute the numerical value of and the maximum cone half-angle of rays that can escape the material.
Answer and steps
Final answer
(a) ; (b) , meaning only rays within a narrow cone half-angle of relative to the normal can escape without undergoing total internal reflection.
Steps
Part (a): Limiting Value of the Critical Angle as
According to Snell's law, total internal reflection occurs when light travels from an optically denser medium of refractive index toward an optically rarer medium of refractive index (). The critical angle of incidence, , corresponds to an angle of refraction of :
Since , we have:
Taking the limit as the index of refraction of the crystal becomes extremely large () while remains finite ():
Because , the limiting value is:
Physical insight: As the index contrast becomes infinitely high, virtually any oblique ray undergoes total internal reflection, meaning only rays propagating exactly normal to the interface can transmit across the boundary.
Part (b): Calculation for Germanium in Air
Given:
- Refractive index of germanium,
- Refractive index of air,
Using the critical angle formula:
Cone of Escape: Light rays originating inside the material can escape into the air only if their angle of incidence relative to the surface normal is less than or equal to the critical angle (). Rays with undergo total internal reflection and remain trapped inside the crystal.
Therefore, escaping light is confined to a circular cone centered on the surface normal with a maximum half-angle equal to .
Typical errors
01 The student inverts the ratio of refractive indices in Snell's law, leading to an undefined sine value and an inability to correctly evaluate the limit or the numerical angle.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Light travels from the higher-index crystal () toward the lower-index gas (). Applying Snell's law at the critical angle gives , which yields . Inverting this ratio gives a value greater than , which is impossible for the sine function.
- Step 2Correct
Because of the inverted formula in Step 1, your sine value grew toward infinity. Using the correct relation , as with finite , the ratio approaches , so .
- Step 3
, which has no real solution, so rays cannot escape
Correct; rays within a cone half-angle of escape.
Substituting into the correct ratio gives , which yields a well-defined critical angle of . Rays incident at angles up to from the normal can escape into air.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that the critical angle occurs where the refracted angle reaches .
You attempted to evaluate the asymptotic limit as .
You recognized that an arcsine value cannot take an argument greater than in real numbers.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou set instead of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou wrote the ratio of refractive indices without deriving it directly from Snell's law (). Because light must travel from a denser medium to a rarer medium for total internal reflection to occur (), the ratio defining must always be .
REASONING PATH
Your ACEpath teacher’s suggested approach- Snell's Law Derivation Check
Always write down the full Snell's law equation before isolating to ensure the indices stay attached to their respective media.
- Sine Range Sanity Check
If your expression for evaluates to a number greater than , immediately check whether you inverted the ratio of refractive indices.
CORRECTED PATH
ACEpath Teacher's DemonstrationApply Snell's law at the boundary: .
Solve for the sine of the critical angle: .
For part (a), take the limit as : , so .
For part (b), substitute and : .
Calculate the angle: .
(a) ; (b) , with a maximum escape cone half-angle of .
02 The student confuses the critical angle measured relative to the surface normal with the grazing angle measured relative to the interface, subtracting θc from 90°.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
{\max} = 90^ - 14.5^ = 75.5^
CorrectIn geometric optics, the escape cone is centered on the surface normal. Rays can escape into the rarer medium only if their angle of incidence satisfies . Therefore, the maximum half-angle of the cone is , not its complement with respect to the interface surface.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly related the critical angle to the index ratio using Snell's law.
You evaluated the asymptotic limit of the critical angle correctly as .
You calculated the numerical value of the critical angle accurately.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the escape cone half-angle as an angle measured from the material's planar surface rather than from the surface normal, leading you to subtract from .
REASONING PATH
Your ACEpath teacher’s suggested approach- Escape Cone Reference Axis
Optical angles in Snell's law and total internal reflection are measured from the surface normal, not the boundary interface.
Always draw the surface normal as the central axis of the cone; the half-angle of transmitted rays inside the material is exactly .
CORRECTED PATH
ACEpath Teacher's DemonstrationThe condition for light rays to escape the material without total internal reflection is , where is the angle of incidence relative to the surface normal.
This geometry forms a right circular cone inside the crystal whose central axis is perpendicular to the boundary.
Therefore, the semi-vertical angle (cone half-angle) is equal to .
(a) ; (b) , and the maximum escape cone half-angle is .
03 The student confuses the escape cone half-angle with the full apex angle of the escape cone, multiplying the critical angle by two.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
The half-angle of a cone is measured from its central axis (the surface normal) to its outer boundary. Because rays escape when their angle of incidence satisfies , the maximum half-angle is simply . Multiplying by computes the total cone apex angle (), not the half-angle.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly derived the limiting critical angle of as .
You accurately calculated the critical angle for germanium in air as .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou knew that total internal reflection forms a cone of rays, but you calculated the full apex angle instead of the requested half-angle.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the geometrical definitions of cone half-angle (semi-vertical angle measured from the normal axis) and full apex angle (the total angular span across the cone).
REASONING PATH
Your ACEpath teacher’s suggested approach- Define Cone Half-Angle
In optics, the cone half-angle is the angle between the central normal axis and the extreme ray: .
Always measure the half-angle from the normal to the ray boundary; do not multiply by 2 unless the full apex angle is specifically requested.
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify that rays escape the planar surface when the angle of incidence satisfies .
Recognize that the normal axis forms the center of a circular cone of escaping rays.
Conclude that the semi-vertical angle (cone half-angle) is equal to .
(a) ; (b) , maximum cone half-angle
Lock it in
What is the formula for the critical angle when light travels from medium 1 () into medium 2 (), and what condition must the indices satisfy?
, which requires so that .
Similar question
A core-cladding optical fiber has a core index and a cladding index . Calculate the critical angle at the core-cladding interface.
Answer
Using , we find .
A light source is placed at the bottom of a pool of liquid with refractive index . Light emerges into air () in a circular cone. Find the vertex angle (full angle, ) of this cone of escape.
Answer
First find the half-angle: . The full vertex angle is .
An optical crystal with refractive index is immersed in a liquid of variable index . If the escape cone half-angle is observed to be , determine the refractive index of the liquid .
Answer
Set . From , we have . Since , .