Resources

A horizontal steel piano wire has a length of L=0.850 mL = 0.850\text{ m} and a total mass of m=4.25 gm = 4.25\text{ g}. It is placed under a tensile load provided by a hanging mass of M=36.0 kgM = 36.0\text{ kg} suspended vertically over a frictionless pulley (g=9.80 m/s2g = 9.80\text{ m/s}^2). When plucked, the wire vibrates in its third harmonic (n=3n = 3). Calculate the wavelength λ\lambda of the transverse wave on the string and the corresponding oscillation frequency ff.

Answer and steps

Final answer

λ=0.567 m\lambda = 0.567\text{ m}, f=469 Hzf = 469\text{ Hz}

Steps

01

Calculate the wavelength for the third harmonic

For a string fixed at both ends, a standing wave forms when the length LL accommodates an integer number of half-wavelengths:

L=n(λ2)L = n \left(\frac{\lambda}{2}\right)

Rearranging to solve for the wavelength λ\lambda of the nn-th harmonic:

λ=2Ln\lambda = \frac{2L}{n}

For the third harmonic (n=3n = 3) with string length L=0.850 mL = 0.850\text{ m}:

λ=2(0.850 m)3=1.70 m3≈0.567 m\lambda = \frac{2(0.850\text{ m})}{3} = \frac{1.70\text{ m}}{3} \approx 0.567\text{ m}


02

Determine the tension and linear mass density

First, find the tension TT in the wire. Because the hanging mass MM is in static equilibrium over a frictionless pulley:

T=Mg=(36.0 kg)(9.80 m/s2)=352.8 NT = Mg = (36.0\text{ kg})(9.80\text{ m/s}^2) = 352.8\text{ N}

Next, convert the mass of the wire to kilograms (m=4.25 g=4.25×10−3 kgm = 4.25\text{ g} = 4.25 \times 10^{-3}\text{ kg}) and compute the linear mass density μ\mu:

μ=mL=4.25×10−3 kg0.850 m=5.00×10−3 kg/m\mu = \frac{m}{L} = \frac{4.25 \times 10^{-3}\text{ kg}}{0.850\text{ m}} = 5.00 \times 10^{-3}\text{ kg/m}


03

Calculate the wave speed

The propagation speed vv of a transverse wave on a flexible stretched string depends on tension and mass density:

v=Tμ=352.8 N5.00×10−3 kg/m=70560 m2/s2≈265.63 m/sv = \sqrt{\frac{T}{\mu}} = \sqrt{\frac{352.8\text{ N}}{5.00 \times 10^{-3}\text{ kg/m}}} = \sqrt{70560\text{ m}^2/\text{s}^2} \approx 265.63\text{ m/s}


04

Calculate the oscillation frequency

Using the wave speed relationship v=fλv = f\lambda, the oscillation frequency is:

f=vλ=265.63 m/s1.703 m=3×265.63 m/s1.70 m≈469 Hzf = \frac{v}{\lambda} = \frac{265.63\text{ m/s}}{\frac{1.70}{3}\text{ m}} = \frac{3 \times 265.63\text{ m/s}}{1.70\text{ m}} \approx 469\text{ Hz}

Common Pitfall: Remember to convert the wire's mass from grams to kilograms before calculating linear mass density μ\mu, or the calculated wave speed and frequency will be off by a factor of 1000≈31.6\sqrt{1000} \approx 31.6.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert the mass of the wire from grams to kilograms when calculating the linear mass density, leading to an incorrect wave speed and frequency.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    λ=2L3=2(0.850)3  ⟹  λ=0.567 m\lambda = \frac{2L}{3} = \frac{2(0.850)}{3} \implies \lambda = 0.567\text{ m}

  2. Step 2

    T=Mg=36.0×9.80=352.8 NT = Mg = 36.0 \times 9.80 = 352.8\text{ N}

  3. Step 3

    μ=mL=4.250.850=5.00 kg/m\mu = \frac{m}{L} = \frac{4.25}{0.850} = 5.00\text{ kg/m}

    Correct

    μ=mL=4.25×10−3 kg0.850 m=5.00×10−3 kg/m\mu = \frac{m}{L} = \frac{4.25 \times 10^{-3}\text{ kg}}{0.850\text{ m}} = 5.00 \times 10^{-3}\text{ kg/m}

    You substituted the mass as 4.25 g4.25\text{ g} directly instead of converting it to kilograms (4.25×10−3 kg4.25 \times 10^{-3}\text{ kg}), leading to a linear mass density that is 10001000 times too large.

  4. Step 4

    v=Tμ=352.85.00=70.56=8.40 m/sv = \sqrt{\frac{T}{\mu}} = \sqrt{\frac{352.8}{5.00}} = \sqrt{70.56} = 8.40\text{ m/s}

    Correct

    v=Tμ=352.8 N5.00×10−3 kg/m≈265.63 m/sv = \sqrt{\frac{T}{\mu}} = \sqrt{\frac{352.8\text{ N}}{5.00 \times 10^{-3}\text{ kg/m}}} \approx 265.63\text{ m/s}

    Your formula for wave speed is correct, but the result is affected by your earlier density calculation.

  5. Step 5

    f=vλ=8.400.567=14.8 Hzf = \frac{v}{\lambda} = \frac{8.40}{0.567} = 14.8\text{ Hz}

    Correct

    f=vλ=265.63 m/s0.567 m≈469 Hzf = \frac{v}{\lambda} = \frac{265.63\text{ m/s}}{0.567\text{ m}} \approx 469\text{ Hz}

    You correctly applied the wave relationship f=vλf = \frac{v}{\lambda}, but the numerical value inherits the error in wave speed.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related the string length to the third-harmonic wavelength.

You accurately calculated the tension using Newton's second law for the hanging mass.

You selected the correct formulas for wave speed on a stretched string and wave frequency.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Oversight

You wrote kg/m\text{kg/m} as the unit for linear mass density, but you plugged in the numerical mass value in grams (4.254.25) rather than kilograms (0.004250.00425).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking that mechanical formulas involving newtons (1 N=1 kg⋅m/s21\text{ N} = 1\text{ kg}\cdot\text{m/s}^2) strictly require mass to be expressed in standard SI units (kilograms, kg\text{kg}).

REASONING PATH
Your ACEpath teacher’s suggested approach
SI Base Unit Consistency
  • In wave mechanics, TT is in newtons (kg⋅m/s2\text{kg}\cdot\text{m/s}^2), so linear mass density μ\mu must be in kg/m\text{kg/m}.

  • Always convert masses given in grams to kilograms (1 g=10−3 kg1\text{ g} = 10^{-3}\text{ kg}) before computing density or applying dynamic equations.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the wire mass: m=4.25 g=4.25×10−3 kgm = 4.25\text{ g} = 4.25 \times 10^{-3}\text{ kg}.

  2. Compute linear mass density: μ=4.25×10−3 kg0.850 m=5.00×10−3 kg/m\mu = \frac{4.25 \times 10^{-3}\text{ kg}}{0.850\text{ m}} = 5.00 \times 10^{-3}\text{ kg/m}.

  3. Compute wave speed: v=Tμ=352.8 N5.00×10−3 kg/m=70560 m2/s2≈265.63 m/sv = \sqrt{\frac{T}{\mu}} = \sqrt{\frac{352.8\text{ N}}{5.00 \times 10^{-3}\text{ kg/m}}} = \sqrt{70560\text{ m}^2/\text{s}^2} \approx 265.63\text{ m/s}.

  4. Calculate oscillation frequency: f=vλ=265.63 m/s0.567 m≈469 Hzf = \frac{v}{\lambda} = \frac{265.63\text{ m/s}}{0.567\text{ m}} \approx 469\text{ Hz}.

Final answer

λ=0.567 m\lambda = 0.567\text{ m}, f=469 Hzf = 469\text{ Hz}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the units explicitly next to every number during substitution to catch unit mismatches immediately.

  • Perform a quick physical reality check: a steel piano wire under 350 N350\text{ N} of tension vibrates at hundreds of hertz, not a sluggish 15 Hz15\text{ Hz}.

OverviewACEpath Teacher's Diagnosis

02 The student misidentifies the third harmonic condition as λ = L/3 instead of λ = 2L/3, yielding half the correct wavelength and double the frequency.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    λ=L3=0.850/3  ⟹  λ=0.283 m\lambda = \frac{L}{3} = 0.850 / 3 \implies \lambda = 0.283\text{ m}

    Correct

    λ=2L3=2(0.850 m)3≈0.567 m\lambda = \frac{2L}{3} = \frac{2(0.850\text{ m})}{3} \approx 0.567\text{ m}

    For a string fixed at both ends, each standing wave loop equals a half-wavelength (λ2\frac{\lambda}{2}). The third harmonic has 3 loops over length LL, giving L=3(λ2)L = 3\left(\frac{\lambda}{2}\right), so λ=2L3\lambda = \frac{2L}{3}.

  2. Step 2

    T=Mg=36.0×9.80=352.8 NT = Mg = 36.0 \times 9.80 = 352.8\text{ N}

  3. Step 3

    μ=mL=0.004250.850=0.0050 kg/m\mu = \frac{m}{L} = \frac{0.00425}{0.850} = 0.0050\text{ kg/m}

  4. Step 4

    v=Tμ=352.80.0050=265.6 m/sv = \sqrt{\frac{T}{\mu}} = \sqrt{\frac{352.8}{0.0050}} = 265.6\text{ m/s}

  5. Step 5

    f=vλ=265.60.283=938.5 Hzf = \frac{v}{\lambda} = \frac{265.6}{0.283} = 938.5\text{ Hz}

    Correct

    f=vλ=265.63 m/s0.567 m≈469 Hzf = \frac{v}{\lambda} = \frac{265.63\text{ m/s}}{0.567\text{ m}} \approx 469\text{ Hz}

    Your formula f=vλf = \frac{v}{\lambda} and division are carried out correctly, but your result is doubled because it uses the incorrect wavelength from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly found the tension in the wire using the hanging mass equilibrium.

You properly converted the mass of the wire into kilograms to obtain the correct linear mass density.

You correctly used the transverse wave speed formula v=Tμv = \sqrt{\frac{T}{\mu}}.

You correctly recognized the wave relationship f=vλf = \frac{v}{\lambda}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Harmonic wavelength condition error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You equated the length of a single antinode loop with a full wavelength rather than a half-wavelength, leading to λ=Ln\lambda = \frac{L}{n} instead of λ=2Ln\lambda = \frac{2L}{n}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Standing Wave Geometry
  • For a medium fixed at both boundaries, an integer number of half-wavelength loops fits into length LL: L=n(λ2)L = n\left(\frac{\lambda}{2}\right).

  • Always sketch the standing wave pattern or write L=nλ2L = n\frac{\lambda}{2} first before solving for λ=2Ln\lambda = \frac{2L}{n}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the harmonic condition for a wire fixed at both ends: L=n(λ2)L = n\left(\frac{\lambda}{2}\right).

  2. Substitute n=3n = 3 and L=0.850 mL = 0.850\text{ m}: λ=2(0.850 m)3=0.567 m\lambda = \frac{2(0.850\text{ m})}{3} = 0.567\text{ m}.

  3. Recalculate the frequency using the correct wavelength: f=vλ=265.63 m/s0.567 m≈469 Hzf = \frac{v}{\lambda} = \frac{265.63\text{ m/s}}{0.567\text{ m}} \approx 469\text{ Hz}.

Final answer

λ=0.567 m\lambda = 0.567\text{ m}, f=469 Hzf = 469\text{ Hz}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice sketching standing waves for different harmonics nn to visualize why each loop is λ2\frac{\lambda}{2} rather than λ\lambda.

  • Verify your harmonic wavelength formula by checking the fundamental (n=1n = 1): a single loop covers the whole string, meaning half a wave fits on the string (L=λ2  ⟹  λ=2LL = \frac{\lambda}{2} \implies \lambda = 2L).

OverviewACEpath Teacher's Diagnosis

03 The student uses the hanging mass directly as the tension force rather than multiplying by gravitational acceleration, leading to an incorrect wave speed and frequency.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    λ=2L3=2(0.850)3=0.567 m\lambda = \frac{2L}{3} = \frac{2(0.850)}{3} = 0.567\text{ m}

  2. Step 2

    T=36.0 NT = 36.0\text{ N}

    Correct

    T=Mg=(36.0 kg)(9.80 m/s2)=352.8 NT = Mg = (36.0\text{ kg})(9.80\text{ m/s}^2) = 352.8\text{ N}

    You treated the hanging mass of 36.0 kg36.0\text{ kg} directly as a tension force of 36.0 N36.0\text{ N}. Because the hanging mass is in static equilibrium, the tension equals its weight, T=MgT = Mg.

  3. Step 3

    μ=0.004250.850=0.0050 kg/m\mu = \frac{0.00425}{0.850} = 0.0050\text{ kg/m}

  4. Step 4

    v=Tμ=36.00.0050=7200=84.85 m/sv = \sqrt{\frac{T}{\mu}} = \sqrt{\frac{36.0}{0.0050}} = \sqrt{7200} = 84.85\text{ m/s}

    Correct

    v=Tμ=352.8 N0.0050 kg/m≈265.63 m/sv = \sqrt{\frac{T}{\mu}} = \sqrt{\frac{352.8\text{ N}}{0.0050\text{ kg/m}}} \approx 265.63\text{ m/s}

    Your formula for transverse wave speed on a stretched string is correct, but your calculated value was affected by using T=36.0 NT = 36.0\text{ N} instead of 352.8 N352.8\text{ N}.

  5. Step 5

    f=vλ=84.850.567=149.6 Hzf = \frac{v}{\lambda} = \frac{84.85}{0.567} = 149.6\text{ Hz}

    Correct

    f=vλ=265.63 m/s0.567 m≈469 Hzf = \frac{v}{\lambda} = \frac{265.63\text{ m/s}}{0.567\text{ m}} \approx 469\text{ Hz}

    You correctly used the wave relation f=vλf = \frac{v}{\lambda}, but the numerical frequency reflects the earlier error in tension.

WHAT YOU DID WELL
Compliments from Your Teacher

You used the correct harmonic wavelength formula λ=2Ln\lambda = \frac{2L}{n} for n=3n = 3.

You correctly converted the wire's mass from grams to kilograms before finding μ\mu.

You selected the correct formulas for wave speed v=Tμv = \sqrt{\frac{T}{\mu}} and frequency f=vλf = \frac{v}{\lambda}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Mass vs. Weight Confusion

You wrote the hanging mass 36.0 kg36.0\text{ kg} as a tension of 36.0 N36.0\text{ N} instead of multiplying by g=9.80 m/s2g = 9.80\text{ m/s}^2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing mass (MM, measured in kg\text{kg}) with gravitational weight force (Fg=MgF_g = Mg, measured in N\text{N}) when converting a suspended load into string tension.

REASONING PATH
Your ACEpath teacher’s suggested approach
Equilibrium of Suspended Load
  • For a stationary suspended mass MM, the upward rope tension balances downward gravity: T=MgT = Mg.

  • Always multiply the suspended mass in kilograms by gg (9.80 m/s29.80\text{ m/s}^2) to find tension in newtons.

Unit Consistency Check
  • Mass is a scalar in kg\text{kg}; tension is a force in N=kg⋅m/s2\text{N} = \text{kg}\cdot\text{m/s}^2.

  • Before substituting into v=T/μv = \sqrt{T/\mu}, verify that tension carries units of newtons.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute the true string tension: T=Mg=(36.0 kg)(9.80 m/s2)=352.8 NT = Mg = (36.0\text{ kg})(9.80\text{ m/s}^2) = 352.8\text{ N}.

  2. Recalculate the transverse wave speed: v=Tμ=352.8 N0.0050 kg/m=70560≈265.63 m/sv = \sqrt{\frac{T}{\mu}} = \sqrt{\frac{352.8\text{ N}}{0.0050\text{ kg/m}}} = \sqrt{70560} \approx 265.63\text{ m/s}.

  3. Recalculate the frequency: f=vλ=265.63 m/s1.703 m≈469 Hzf = \frac{v}{\lambda} = \frac{265.63\text{ m/s}}{\frac{1.70}{3}\text{ m}} \approx 469\text{ Hz}.

Final answer

λ=0.567 m\lambda = 0.567\text{ m}, f=469 Hzf = 469\text{ Hz}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between mass in kilograms and force in newtons in free-body diagrams.

  • Practice checking whether a given value is a tension force directly or a hanging mass that requires T=MgT = Mg.

Lock it in

Similar question

01

A nylon guitar string has length L=0.650 mL = 0.650\text{ m} and mass m=3.25 gm = 3.25\text{ g}. It is under a tension of T=80.0 NT = 80.0\text{ N}. Find the speed of transverse waves on this string.

Answer

v=126 m/sv = 126\text{ m/s}. Convert m=3.25×10−3 kgm = 3.25 \times 10^{-3}\text{ kg}. Then μ=3.25×10−3 kg0.650 m=5.00×10−3 kg/m\mu = \frac{3.25 \times 10^{-3}\text{ kg}}{0.650\text{ m}} = 5.00 \times 10^{-3}\text{ kg/m}. Finally, v=80.0 N5.00×10−3 kg/m=16000≈126.5 m/sv = \sqrt{\frac{80.0\text{ N}}{5.00 \times 10^{-3}\text{ kg/m}}} = \sqrt{16000} \approx 126.5\text{ m/s}.

02

A horizontal wire with length L=1.20 mL = 1.20\text{ m} and mass m=6.00 gm = 6.00\text{ g} is fixed at both ends. It vibrates in its fundamental mode (n=1n = 1) at a frequency of f=150 Hzf = 150\text{ Hz}. What is the tension TT in the wire?

Answer

T=648 NT = 648\text{ N}. The wavelength is λ=2L=2.40 m\lambda = 2L = 2.40\text{ m}. Wave speed is v=fλ=(150 Hz)(2.40 m)=360 m/sv = f\lambda = (150\text{ Hz})(2.40\text{ m}) = 360\text{ m/s}. Linear density is μ=6.00×10−3 kg1.20 m=5.00×10−3 kg/m\mu = \frac{6.00 \times 10^{-3}\text{ kg}}{1.20\text{ m}} = 5.00 \times 10^{-3}\text{ kg/m}. Solving v=T/μv = \sqrt{T/\mu} gives T=μv2=(5.00×10−3)(360)2=648 NT = \mu v^2 = (5.00 \times 10^{-3})(360)^2 = 648\text{ N}.

03

A steel wire of length L=0.800 mL = 0.800\text{ m} and mass m=2.40 gm = 2.40\text{ g} has one end attached to a hanging mass M=20.0 kgM = 20.0\text{ kg} over a frictionless pulley (g=9.80 m/s2g = 9.80\text{ m/s}^2). Find the frequency of the second harmonic (n=2n = 2).

Answer

f2=320 Hzf_2 = 320\text{ Hz}. Tension is T=Mg=(20.0)(9.80)=196 NT = Mg = (20.0)(9.80) = 196\text{ N}. Linear density is μ=2.40×10−3 kg0.800 m=3.00×10−3 kg/m\mu = \frac{2.40 \times 10^{-3}\text{ kg}}{0.800\text{ m}} = 3.00 \times 10^{-3}\text{ kg/m}. Wave speed is v=1963.00×10−3=65333.3≈255.6 m/sv = \sqrt{\frac{196}{3.00 \times 10^{-3}}} = \sqrt{65333.3} \approx 255.6\text{ m/s}. For n=2n = 2, λ2=L=0.800 m\lambda_2 = L = 0.800\text{ m}, so f2=vλ2=255.60.800≈320 Hzf_2 = \frac{v}{\lambda_2} = \frac{255.6}{0.800} \approx 320\text{ Hz}.

Loading workspace…