Resources
A hockey puck of mass glides across frictionless horizontal ice in the positive -direction at toward an identical stationary puck of mass . After the glancing collision, the first puck is deflected at an angle above the positive -axis with a final speed of . Determine the deflection angle (measured below the positive -axis) and the final speed of the second puck.
Answer and steps
Final answer
below the positive -axis,
Steps
Analyze Momentum along the -Axis
Principle: Conservation of Linear Momentum in Two Dimensions
Because the ice surface is horizontal and frictionless, no external net force acts on the two-puck system in the horizontal plane. Therefore, total linear momentum is conserved independently along the -axis and the -axis: Since both pucks have identical mass (), mass cancels from every term, reducing the conservation law directly to vector velocity: Given that the second puck is initially at rest (), this simplifies to:
Before the collision, motion is strictly along the positive -axis, so the total initial momentum in the -direction is zero:
After the collision, the first puck is deflected above the positive -axis at angle , and the second puck is deflected below the positive -axis at angle :
Dividing by and rearranging:
Using and :
Analyze Momentum along the -Axis
The total initial momentum along the -axis must equal the sum of the final -components:
Dividing by :
With the initial speed and the forward component retained by the deflected first puck evaluated as , the remaining forward velocity component transferred to the second puck is:
Determine the Speed and Angle of the Second Puck
With the perpendicular components of the second puck's velocity known:
-
Final Speed (): Apply the Pythagorean theorem:
-
Deflection Angle (): Use the tangent ratio:
The second puck moves at a final speed of at an angle of below the positive -axis.
Typical errors
01 The student confuses the sine and cosine components of the deflection angles, resolving x-momentum with sine and y-momentum with cosine.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Because the deflection angles are measured relative to the horizontal -axis, the adjacent component along the -axis requires , not .
- Step 2Correct
The vertical component along the -axis is opposite to the deflection angle, so it requires rather than .
- Step 3Correct
Your ratio setup was mathematically sound, but it yielded an incorrect angle because the substituted component values were swapped.
- Step 4Correct
Your application of the Pythagorean theorem was correct, but the final speed inherited the error from the swapped components.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that total linear momentum is independently conserved along perpendicular axes.
You canceled the equal puck masses appropriately across each momentum equation.
You correctly used and the Pythagorean theorem to find the resultant direction and magnitude.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisWhen an angle is measured with respect to the horizontal axis, the side adjacent to the angle lies along the -axis () and the side opposite lies along the -axis (). You inverted these definitions by associating the -direction with sine and the -direction with cosine.
REASONING PATH
Your ACEpath teacher’s suggested approach- Identify Angle Reference Axis
If is measured from the -axis, then the -component is adjacent () and the -component is opposite ().
Always sketch a right triangle with velocity as the hypotenuse before writing momentum equations to confirm which axis is adjacent to the given angle.
CORRECTED PATH
ACEpath Teacher's DemonstrationResolve along the -axis using the cosine component: .
Resolve along the -axis using the sine component: .
Compute the deflection angle: .
Compute the final speed: .
below the positive -axis,
02 The student assumes kinetic energy is conserved in the collision without verifying elasticity, incorrectly treating the collision as elastic.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You assumed that kinetic energy is conserved. Unless a problem explicitly states that a collision is elastic, kinetic energy is generally not conserved. Instead, you need to use conservation of linear momentum along the -axis as your second independent equation.
- Step 2
- Step 3Correct
,
Your algebraic isolation of and evaluation of the inverse sine function were executed accurately, but your final angle is inaccurate because it relies on the incorrect speed from Step 1.
WHAT YOU DID WELL
Compliments from Your TeacherYou recognized that linear momentum is conserved in the transverse -direction.
You correctly set the initial -momentum to zero and equated the final opposing -momentum components.
You carried out the trigonometric evaluation and inverse sine calculation with sound algebraic technique.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakenone
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou assumed that kinetic energy is conserved in the collision without explicit confirmation of elasticity, leading you to bypass the conservation of momentum equation along the -axis.
REASONING PATH
Your ACEpath teacher’s suggested approach- When is Kinetic Energy Conserved?
Total linear momentum is conserved in all isolated collisions, but kinetic energy is conserved only if the collision is explicitly designated as elastic.
Do not write unless the problem explicitly states that the collision is elastic.
- Resolving 2D Collisions by Vector Components
In two dimensions, momentum conservation provides two independent scalar equations: and .
Solve for the two unknown components ( and ) first, then combine them using the Pythagorean theorem and to find speed and direction.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the -momentum conservation equation: .
Divide by and solve for the horizontal component: (or using standard 3-4-5 triangle approximations).
From Step 2, obtain the vertical component: .
Compute the speed using the Pythagorean theorem: .
Compute the deflection angle: .
below the positive -axis,
03 The student treats momentum as a scalar quantity and simply adds or subtracts speeds without resolving into vector components.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
and
You treated momentum as a scalar sum of speeds. Because this is a glancing 2D collision, momentum must be conserved separately along the -axis () and the -axis ().
- Step 2Correct
You assumed the deflection angles must be identical. The angle of the second puck depends on the ratio of its resolved velocity components, .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that the collision conserves linear momentum.
You noted that puck 2 was initially stationary and correctly canceled identical masses.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakenone
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated momentum as a scalar quantity by directly adding and subtracting scalar speeds () instead of setting up vector component equations along the - and -axes.
REASONING PATH
Your ACEpath teacher’s suggested approach- Momentum is a Vector
In two dimensions, linear momentum conservation requires two independent equations: and .
Always resolve every initial and final velocity vector into perpendicular components using sine and cosine before applying conservation.
- Recombining Components
The magnitude of velocity is and direction is .
Solve for the unknown velocity components and first, then combine them using the Pythagorean theorem and inverse tangent.
CORRECTED PATH
ACEpath Teacher's DemonstrationApply -momentum conservation: .
Apply -momentum conservation: (using the exact retained component , giving ).
Calculate final speed: .
Calculate deflection angle: below the positive -axis.
below the positive -axis,
Lock it in
When a vector makes an angle with the horizontal (-axis), which trigonometric function gives the -component and which gives the -component?
and . Principle: the side adjacent to the angle uses cosine, while the opposite side uses sine.
Similar question
A curling stone of mass slides along the -axis at and strikes an identical stationary stone. After the collision, the first stone moves at at an angle of above the -axis. Find the - and -components of the second stone's final velocity.
Answer
, . Along : . Along : .
An object of mass moving at along the -axis collides with a stationary mass . After the collision, mass moves at at an angle of above the -axis (). Calculate the final speed and deflection angle of mass .
Answer
at below the -axis. Conservation along : . Conservation along : . Then , and .
Two gliders on an air table collide. Glider A () moves initially at along . Glider B () is initially stationary. After the collision, Glider B moves at an angle of below the -axis with speed . Find the final velocity vector (speed and angle) of Glider A.
Answer
at above the -axis. Along : . Along : . Thus at .