Resources
A composite system consists of a uniform solid disk of mass and radius mounted rigidly to a uniform thin rod of mass and length such that the rod extends radially outward from the disk's rim along the -axis (the disk center is at the origin and the rod spans from to on the -axis). The assembly is released from rest in a vertical plane from an orientation where the rod is horizontal, pivoting without friction about a fixed horizontal axle through the center of the disk. Using energy conservation and the location of the center of mass, calculate the angular speed of the assembly when the rod swings through the downward vertical position (take ; disk moment of inertia about its center is , and rod moment of inertia about the disk center axle is ).
Answer and steps
Final answer
Steps
Locate the Center of Mass of the Assembly
The pivot axle passes through the center of the disk at the origin .
- Disk: The disk's center of mass is at its geometric center:
- Rod: The uniform rod extends from to . Its center of mass lies at its midpoint:
The center of mass of the combined system along the rod axis is:
Determine the Change in Gravitational Potential Energy
The system is released from rest with the rod horizontal (). When it swings to the downward vertical position:
- The disk's center of mass remains at the origin, so it undergoes no vertical displacement.
- The entire assembly's center of mass drops by a vertical distance .
The decrease in potential energy is:
(Equivalently, considering only the falling rod: .)
Calculate the Total Moment of Inertia about the Pivot
- Disk about the central axle:
- Rod about the central axle: Using the parallel-axis theorem, where the distance from the axle to the rod's center of mass is :
- Total moment of inertia:
Common Pitfall: Do not use the standard rod formula about the axle. That formula applies only when a rod pivots about its own end. Because the rod starts at a distance away from the pivot, the parallel-axis theorem must use the distance to the rod's midpoint, .
Apply Conservation of Energy to Find
Since the axle is frictionless, mechanical energy is conserved:
Solving for :
Typical errors
01 The student forgets to include the parallel-axis theorem shift when calculating the rod's moment of inertia about the pivot at the disk center, using only its center-of-mass moment of inertia.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
- Step 4Correct
You evaluated the rod's moment of inertia only about its own center of mass (). Because the rod rotates about the axle through the disk's center at a distance , you need to add the parallel-axis shift .
- Step 5Correct
Your sum of the moments of inertia followed logically from your previous values, but it inherited the missing parallel-axis term.
- Step 6Correct
You applied the conservation of mechanical energy correctly, but the resulting angular speed was too large due to the underestimated moment of inertia.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly located the composite center of mass along the horizontal axis.
You calculated the gravitational potential energy change accurately.
You used the correct formula for the rotational inertia of the solid disk.
You applied conservation of energy with the correct relationship between kinetic energy and angular speed.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou used for the rod instead of shifting it to the actual pivot axle.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisForgetting that standard moment-of-inertia formulas from tables (like ) apply about an object's center of mass, so an offset rotation axis requires applying the parallel-axis theorem: .
REASONING PATH
Your ACEpath teacher’s suggested approach- Check the Rotation Axis
Every term in must be evaluated with respect to the exact same rotation axis.
Before adding moments of inertia, verify whether the pivot passes through each component's center of mass or is displaced by a distance .
CORRECTED PATH
ACEpath Teacher's DemonstrationInclude the parallel-axis term for the rod: .
Calculate the corrected total rotational inertia: .
Recalculate the angular speed using energy conservation: .
02 The student misidentifies the center of mass of the rod as L/2 from the pivot instead of R + L/2 when calculating potential energy change.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You used the rod's midpoint relative to its own attachment point () instead of its coordinate relative to the pivot axle at the disk's center ().
- Step 2Correct
You correctly formulated the potential energy decrease as , but the numerical result was halved because of the incorrect value of from Step 1.
- Step 3
- Step 4Correct
You correctly applied the conservation of energy formula , but obtained due to using the underestimated potential energy loss from Step 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the rotational inertia of the combined system about the axle using the parallel-axis theorem.
You correctly related the change in potential energy to the final rotational kinetic energy through energy conservation.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou recognized in part (b) that the rod's midpoint was at from the axle, but in part (a) you inadvertently wrote as the position coordinate of the rod.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisFailing to measure all component center-of-mass coordinates from the shared origin (the axle) when assembling a multi-body center-of-mass formula.
REASONING PATH
Your ACEpath teacher’s suggested approach- Establish a Single Global Origin
Every position coordinate in must be measured from the exact same reference coordinate system.
Before computing , clearly sketch the axis with origin at the pivot and explicitly write and .
CORRECTED PATH
ACEpath Teacher's DemonstrationSet the origin at the pivot (center of disk). The disk center is at , and the rod center is at .
Find the system center of mass: .
Calculate the potential energy drop as the assembly swings down by : .
Use the total rotational inertia already found, , to solve for angular speed: .
03 The student omits the disk's moment of inertia, mistakenly assuming that because the disk's center of mass does not change height, the disk does not contribute to the rotational kinetic energy.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You calculated the moment of inertia of the rod about the axle correctly, but you set and omitted the disk. Even though the disk's center of mass does not translate vertically, the disk rotates about its own central axle and contributes rotational kinetic energy .
- Step 4Correct
Your energy conservation setup and algebraic steps were mathematically sound, but substituting the incomplete moment of inertia propagated to an incorrect final angular speed.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the position of the center of mass for the combined assembly.
You correctly determined the loss in gravitational potential energy using the vertical drop of the center of mass.
You accurately applied the parallel-axis theorem to find the rod's moment of inertia about the central pivot.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou assumed the disk does not contribute to the rotational inertia because its center of mass does not translate or change height.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating zero change in gravitational potential energy with zero rotational kinetic energy: any rigid part rotating about an axle possesses rotational kinetic energy , regardless of whether its center of mass moves.
REASONING PATH
Your ACEpath teacher’s suggested approach- Include All Rotating Masses in $I_{\text{tot}}$
The total moment of inertia of a rigid body about a fixed pivot is the scalar sum of the moments of inertia of all its rigid components about that exact same pivot axle: .
Always list every component of the rigid assembly and compute its moment of inertia about the pivot before summing.
- Distinguish Potential Energy from Rotational Inertia
A component whose center of mass is on the pivot has , but its rotational kinetic energy is non-zero whenever and .
Check each part separately: determine from the height change of its center of mass, and determine from its moment of inertia about the axle.
CORRECTED PATH
ACEpath Teacher's DemonstrationLock it in
What does the parallel-axis theorem state, and when is it required?
. It is required whenever an object rotates about an axis parallel to, but separated by distance from, an axis through its center of mass.
Similar question
A uniform thin rod of mass and length is attached to the rim of a small wheel of radius . The rod extends radially outward. Find the moment of inertia of the rod alone about the central axle of the wheel.
Answer
. The center of mass of the rod is at from the axle. Using the parallel-axis theorem, .
A uniform square plate of mass and side has moment of inertia about an axis perpendicular to the plate through its center. If the plate is pivoted about a parallel axis passing through one of its corners, what is its moment of inertia about this corner pivot?
Answer
(or ). The distance from the center to a corner is . By the parallel-axis theorem, .
A physical pendulum consists of a uniform disk of mass and radius suspended from a pivot at its outer edge. It is released from rest when the diameter passing through the pivot is horizontal. Calculate the angular speed of the disk when it swings through its lowest vertical position (take ).
Answer
. The center of mass drops by , so . By the parallel-axis theorem, . By energy conservation, .