Resources
A point mass executes one-dimensional motion described by , where is in meters () and is in seconds (). A common misconception is that when an object's position coordinate is zero (), its instantaneous velocity must also be zero, and vice-versa. (a) Determine the instantaneous velocity of the particle at the times when it crosses the origin (). (b) Determine the position coordinate of the particle at the instant its instantaneous velocity is zero ().
Answer and steps
Final answer
(a) At , ; at , ; (b) At when , .
Steps
Understanding the Relationship Between Position and Velocity
The instantaneous velocity of a particle moving along a straight line is the time derivative of its position function :
Given the position function:
Taking the first derivative with respect to time :
Part (a): Velocity When the Particle Crosses the Origin ()
-
Find the times when :
Divide the entire equation by :
Factor the quadratic equation:
This yields two positive times:
-
Calculate the velocity at each of these instants:
- At :
- At :
Key Takeaway: When the position coordinate is zero (), the particle is passing through the reference origin, but it is moving at and , respectively. Position being zero does not imply zero velocity.
Part (b): Position When the Velocity is Zero ()
- Find the instant at which :
- Evaluate the position at :
Common Pitfall: A particle coming to an instantaneous stop () simply marks a turning point in its trajectory, which can occur at any spatial coordinate—in this case, at , not at the origin.
Typical errors
01 The student misidentifies instantaneous velocity as average velocity x(t)/t rather than taking the time derivative dx/dt, leading to incorrect velocity values.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You calculated velocity by dividing position by time () instead of taking the derivative . Instantaneous velocity is the time derivative of position, not position divided by time.
- Step 3Correct
Because you set your expression for to zero, you recreated the equation instead of finding the true turning point where .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly set to locate the origin-crossing events.
You factored the quadratic equation accurately to find and .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeNo, this is a conceptual misunderstanding regarding the definition of instantaneous velocity rather than a simple calculation slip.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated instantaneous velocity as the algebraic quotient rather than finding the derivative of position with respect to time, . Because at and , dividing by forced the velocity to appear as zero at those points.
REASONING PATH
Your ACEpath teacher’s suggested approach- Derivative Definition
Instantaneous velocity is defined as the time rate of change of position: .
Always differentiate the position function using calculus power rules before evaluating velocity at a specific time.
- Independence of Position and Velocity
An object crossing is simply at the origin; its velocity depends entirely on the derivative at that instant.
Do not assume when , and do not confuse finding the roots of with finding the roots of .
CORRECTED PATH
ACEpath Teacher's DemonstrationDifferentiate the position function with respect to time: .
Evaluate at the crossing times from Step 1: and .
For part (b), set the true velocity equal to zero: .
Substitute back into the position function: .
(a) , ; (b) at
02 The student differentiates the quadratic term incorrectly by omitting the coefficient factor of 2, writing dx/dt as 3.0t - 12.0 instead of 6.0t - 12.0.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
When differentiating with respect to , you brought down the exponent implicitly but forgot to multiply the existing coefficient by , yielding instead of .
- Step 3Correct
Your substitution and arithmetic were carried out faithfully, but the values are incorrect because they rely on the incorrect velocity function.
- Step 4Correct
You correctly set your velocity expression to zero and substituted the resulting time back into , but the derived stopping time and position were thrown off by the initial differentiation mistake.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly set and factored the quadratic equation to obtain the crossing times.
You correctly identified that instantaneous velocity is defined as the first time derivative of position, .
You correctly recognized that finding the position when velocity is zero requires setting , solving for , and evaluating .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou differentiated into rather than multiplying the existing coefficient by the power of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisA lapse in applying the constant multiple rule alongside the power rule: for any term , the derivative is , meaning the exponent must multiply the leading coefficient .
REASONING PATH
Your ACEpath teacher’s suggested approach- Differentiating Power Terms with Coefficients
Always explicitly write out the multiplication step before simplifying.
CORRECTED PATH
ACEpath Teacher's DemonstrationDifferentiate correctly: .
Evaluate velocity at : .
Evaluate velocity at : .
Set to find the turnaround time: .
Evaluate position at : .
(a) At , ; at , . (b) At (when ), .
03 The student acts on the misconception described in the prompt that v = 0 whenever x = 0, assuming velocity is zero at the origin and position is zero at zero velocity.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Crossing the origin () does not mean the particle is at rest. You need to differentiate with respect to time to get , then evaluate it at and .
- Step 3Correct
A momentary stop () occurs at a turning point, not necessarily at the origin. You must set to find the time , then substitute that time into to find .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly factored the quadratic position equation to find the times when the particle is at the origin.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeWHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated position () and instantaneous velocity () as if one being zero forces the other to be zero. In kinematics, position tells you where an object is relative to a reference point, while velocity tells you how fast and in what direction that position is changing. An object can be moving rapidly through the origin (), and it can come to a temporary stop anywhere in space ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Differentiate to find velocity
Never guess velocity from position values; always compute the time derivative of first.
- Evaluate conditions independently
and represent entirely distinct physical events.
Solve for the specific time satisfying the stated condition, then substitute that into the requested function.
CORRECTED PATH
ACEpath Teacher's DemonstrationDifferentiate with respect to to find .
Evaluate velocity at the origin crossings: and .
Set to find the turning-point time: .
Substitute into : .
(a) At , ; at , ; (b) At ,
Lock it in
How is instantaneous velocity formally defined for an object with position function ?
. It is the first derivative of position with respect to time, not the ratio .
Similar question
A particle moves along a straight line with position given by , where is in meters and is in seconds. Determine the instantaneous velocity of the particle at the instant it passes through the origin for .
Answer
. Setting gives for . Differentiating gives . Substituting yields .
The position of a body moving in one dimension is , with in meters and in seconds. Find the position of the body at each instant its instantaneous velocity is zero.
Answer
and . Differentiating gives . Setting yields and . Evaluating position: , and .
An object moves along the -axis according to for . Determine all times when the object is at the origin, and calculate the instantaneous velocity at each of those times. State whether the object is instantaneously at rest at any origin crossing.
Answer
At , ; at , (at rest at the origin). Factoring gives , so crossings occur at and . The velocity function is . Evaluating gives and .