Resources
In human hearing diagnostics, the threshold of pain corresponds to a sound level of relative to the threshold of hearing . A laboratory siren operating at in air (density , speed of sound ) is gradually amplified. (a) Calculate the critical pressure amplitude and critical displacement amplitude associated with this exact threshold of pain. (b) If the atmospheric background pressure is , express as a percentage of ambient atmospheric pressure to verify whether the linear acoustic wave approximation (which requires ) remains valid at this critical upper boundary.
Answer and steps
Final answer
(a) , ; (b) , confirming that linear wave theory remains valid because .
Steps
Part (a): Critical Pressure and Displacement Amplitudes
Step 1: Determine the sound intensity at the threshold of pain
The sound level in decibels () is defined relative to the reference threshold of hearing as:
Substitute and :
Step 2: Calculate the pressure amplitude
The time-averaged intensity of a harmonic sound wave in a fluid of density and wave speed is related to its pressure amplitude by:
Solving for :
Substitute , , and :
Step 3: Calculate the displacement amplitude
Pressure amplitude and displacement amplitude are linked through the acoustic impedance and angular frequency:
where the angular frequency is :
Rearranging to solve for :
Part (b): Validation of the Linear Wave Approximation
To check the validity of linear acoustics, compare the critical pressure fluctuation to the ambient atmospheric pressure :
Because the pressure disturbance constitutes only about of the atmospheric background pressure, the condition is strongly satisfied. This confirms that the linear acoustic wave approximation remains thoroughly valid even at the extreme threshold of human pain.
Typical errors
01 The student omits the factor of 2 in the intensity formula, mistakenly using I = (ΔP_max)² / (ρv), which underestimates the pressure amplitude and displacement amplitude.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You omitted the factor of in the denominator of the time-averaged acoustic intensity formula. Because intensity is the time average of a sinusoidal power flux, an average factor of is required, giving .
- Step 3Correct
Your formula linking pressure amplitude and displacement amplitude is completely correct, but your numerical result is affected by substituting the incorrect instead of .
- Step 4Correct
Your logical reasoning and comparison to atmospheric pressure are correct, but the numerical percentage inherited the earlier error in .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the decibel definition to find the threshold intensity .
You correctly set up the relation to relate pressure amplitude to displacement amplitude.
You correctly evaluated the condition for the linear acoustic wave approximation by comparing the pressure disturbance to ambient atmospheric pressure.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou wrote instead of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing peak amplitude with root-mean-square (RMS) amplitude when calculating time-averaged wave intensity. For peak amplitudes , the cycle average of introduces a factor of , yielding . Writing is only valid if is the RMS pressure fluctuation.
REASONING PATH
Your ACEpath teacher’s suggested approach- Time-Averaging Sinusoidal Waves
For a harmonic wave with peak amplitude , the time average over a cycle satisfies .
Always include the factor of in the denominator whenever expressing average sound intensity in terms of peak pressure amplitude: .
- Peak vs. RMS Identification
, so .
Before calculating, check whether the variable represents peak amplitude (needs ) or RMS amplitude (needs ).
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the complete time-averaged intensity formula: .
Solve for the critical pressure amplitude: .
Calculate the critical displacement amplitude using : .
Compute the ratio relative to atmospheric pressure: .
Conclude that because , the condition holds and linear wave theory remains valid.
(a) , ; (b) , confirming that the linear acoustic wave approximation remains valid.
02 The student confuses frequency f with angular frequency ω, omitting the factor of 2π when calculating the displacement amplitude from pressure amplitude.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
The acoustic relation is , where is the angular frequency in radians per second, not the ordinary frequency in hertz. Omitting made your result roughly times too large.
- Step 4
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted the sound level from decibels to physical intensity in watts per square meter.
You used the exact relationship between wave intensity and acoustic pressure amplitude.
You evaluated the ratio of pressure disturbance to atmospheric background pressure and drew the correct physical conclusion about linearity.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou substituted the ordinary frequency where the constitutive equation requires angular frequency .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing cyclic frequency (measured in or ) with angular frequency (measured in ) when solving acoustic amplitude relations derived from wave equations.
REASONING PATH
Your ACEpath teacher’s suggested approach- Check Angular Frequency vs Ordinary Frequency
Wave speed and wave number relations relate pressure and displacement amplitudes by .
Whenever an acoustic formula contains frequency alongside wave parameters like wave speed or wave number , always ensure you write before evaluating.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the constitutive relationship linking pressure amplitude and displacement amplitude: .
Solve for the critical displacement amplitude: .
Substitute the numerical values: .
(a) , ; (b) , linear approximation is valid.
03 The student computes the decibel level using a linear ratio rather than a logarithmic relation, setting β = I / I₀ and obtaining an absurdly small intensity of 1.20 × 10⁻¹⁰ W/m².
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Decibels measure sound level on a logarithmic scale: . Inverting this yields , not a direct product .
- Step 2Correct
Your formula is completely correct, but the value is affected by substituting the incorrect intensity from Step 1.
- Step 3Correct
Your algebraic relation connecting displacement amplitude and pressure amplitude is correct, but using the incorrect pressure amplitude led to an inaccurate displacement amplitude.
- Step 4Correct
, confirming that the linear approximation remains valid.
Your reasoning for testing the linear acoustic limit is conceptually sound, but the numerical percentage reflects the earlier pressure error.
WHAT YOU DID WELL
Compliments from Your TeacherYou selected the correct physical formula connecting wave intensity and acoustic pressure amplitude.
You accurately related displacement amplitude to pressure amplitude via the acoustic impedance and angular frequency.
You correctly set up the ratio comparing pressure fluctuation to atmospheric background pressure to test the linear approximation.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou treated the sound level in decibels as a direct proportionality constant rather than an exponent in a logarithmic scale.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing a decibel value with a linear intensity ratio . Because decibels represent ten times the base-10 logarithm of , solving for intensity requires an exponential inversion: .
REASONING PATH
Your ACEpath teacher’s suggested approach- Decibel to Intensity Conversion
Sound level in decibels is , which inverts to .
Always isolate the ratio by dividing by 10 and raising 10 to that power before multiplying by .
- Sanity Check for Loud Sounds
The human threshold of pain () corresponds to and a pressure amplitude of tens of Pascals, not fractions of a millipascal.
Check that sounds above normal conversation () result in an intensity substantially larger than .
CORRECTED PATH
ACEpath Teacher's DemonstrationInvert the decibel definition: .
Calculate intensity: .
Compute pressure amplitude: .
Compute displacement amplitude: .
Compute pressure percentage: , confirming that linear wave theory holds.
(a) , ; (b) , confirming the linear approximation remains valid.
Lock it in
What is the correct formula for the time-averaged intensity of a harmonic sound wave in terms of its peak pressure amplitude ?
. The factor of in the denominator arises from the time average .
Similar question
A sound wave propagating in water (, ) has an intensity of . Calculate its maximum pressure amplitude .
Answer
Using , we find .
A conversational speech sound wave has a sound level of in air (, ) with . (a) Find the sound intensity . (b) Find the peak pressure amplitude .
Answer
(a) . (b) .
A planar sound wave at frequency in air (, ) has a displacement amplitude of . Calculate: (a) the peak pressure amplitude , and (b) the resulting sound level in decibels relative to .
Answer
(a) Angular frequency . Then . (b) . Thus .