Resources

In a university radiation laboratory experiment, a student uses an end-window Geiger-Müller (GM) tube to identify three unknown radioactive sources (S1S_1, S2S_2, and S3S_3). The background count rate is measured to be Rbg=24.0 cpmR_{\text{bg}} = 24.0\text{ cpm} (counts per minute). The student records the gross count rate for each source at a fixed distance of 3.0 cm3.0\text{ cm} under three shielding configurations: (i) no absorber, (ii) a single sheet of standard paper (0.10 mm0.10\text{ mm} thick), and (iii) a 5.0 mm5.0\text{ mm} thick aluminum slab. The observed gross count rates are:

  • Source S1S_1: No absorber =3840 cpm= 3840\text{ cpm}; Paper =26.0 cpm= 26.0\text{ cpm}; Aluminum =24.0 cpm= 24.0\text{ cpm}.
  • Source S2S_2: No absorber =5120 cpm= 5120\text{ cpm}; Paper =5090 cpm= 5090\text{ cpm}; Aluminum =28.0 cpm= 28.0\text{ cpm}.
  • Source S3S_3: No absorber =1860 cpm= 1860\text{ cpm}; Paper =1855 cpm= 1855\text{ cpm}; Aluminum =1640 cpm= 1640\text{ cpm}. Calculate the net count rate in cpm\text{cpm} for each source under condition (i), and rigorously classify the primary radiation type emitted by S1S_1, S2S_2, and S3S_3 based on the differential absorption data.

Answer and steps

Final answer

Net initial count rates: S1=3816 cpmS_1 = 3816\text{ cpm}, S2=5096 cpmS_2 = 5096\text{ cpm}, S3=1836 cpmS_3 = 1836\text{ cpm}. Classifications: S1S_1 is an alpha (α\alpha) emitter (stopped completely by paper); S2S_2 is a beta (β\beta) emitter (penetrates paper but stopped completely by 5 mm5\text{ mm} aluminum); S3S_3 is a gamma (γ\gamma) emitter (penetrates both paper and aluminum with minimal attenuation).

Steps

01

Calculation of Net Initial Count Rates

The net count rate RnetR_{\text{net}} is obtained by subtracting the background count rate Rbg=24.0 cpmR_{\text{bg}} = 24.0\text{ cpm} from the gross measured count rate RgrossR_{\text{gross}}:

Rnet=Rgross−RbgR_{\text{net}} = R_{\text{gross}} - R_{\text{bg}}

Under condition (i) with no absorber:

  • Source S1S_1: Rnet,1=3840 cpm−24.0 cpm=3816 cpmR_{\text{net}, 1} = 3840\text{ cpm} - 24.0\text{ cpm} = 3816\text{ cpm}
  • Source S2S_2: Rnet,2=5120 cpm−24.0 cpm=5096 cpmR_{\text{net}, 2} = 5120\text{ cpm} - 24.0\text{ cpm} = 5096\text{ cpm}
  • Source S3S_3: Rnet,3=1860 cpm−24.0 cpm=1836 cpmR_{\text{net}, 3} = 1860\text{ cpm} - 24.0\text{ cpm} = 1836\text{ cpm}

02

Physical Basis for Radiation Identification

Different nuclear emissions exhibit distinct penetrating powers due to differences in mass, charge, and ionization density:

  1. Alpha (α\alpha) particles: Massive and doubly positively charged (X24X2224HeX2+\ce{^4_2He^{2+}}), with extremely high specific ionization. They lose kinetic energy rapidly and have a very short range in matter, being stopped completely by a few centimeters of air or a thin sheet of paper (0.1 mm0.1\text{ mm}).
  2. Beta (β\beta) particles: High-speed electrons (β−\beta^-) or positrons (β+\beta^+) with lower mass and charge magnitude. They readily penetrate paper but are completely absorbed by several millimeters of a low-to-medium ZZ material like aluminum (3 mm3\text{ mm} to 5 mm5\text{ mm}).
  3. Gamma (γ\gamma) rays: High-energy electromagnetic photons with zero charge and zero rest mass. They interact weakly via the photoelectric effect, Compton scattering, and pair production, penetrating both paper and thin aluminum slabs with only minor exponential attenuation.

03

Classification of the Radioactive Sources

  • Source S1S_1:

    • With paper: Rnet=26.0 cpm−24.0 cpm=2.0 cpm≈0 cpmR_{\text{net}} = 26.0\text{ cpm} - 24.0\text{ cpm} = 2.0\text{ cpm} \approx 0\text{ cpm}.
    • With aluminum: Rnet=24.0 cpm−24.0 cpm=0.0 cpmR_{\text{net}} = 24.0\text{ cpm} - 24.0\text{ cpm} = 0.0\text{ cpm}.
    • Conclusion: The radiation is completely blocked by a standard sheet of paper (0.10 mm0.10\text{ mm}). Therefore, S1S_1 is an alpha (α\alpha) emitter.
  • Source S2S_2:

    • With paper: Rnet=5090 cpm−24.0 cpm=5066 cpmR_{\text{net}} = 5090\text{ cpm} - 24.0\text{ cpm} = 5066\text{ cpm} (nearly 99.4%99.4\% transmission).
    • With aluminum: Rnet=28.0 cpm−24.0 cpm=4.0 cpm≈0 cpmR_{\text{net}} = 28.0\text{ cpm} - 24.0\text{ cpm} = 4.0\text{ cpm} \approx 0\text{ cpm}.
    • Conclusion: The radiation readily passes through paper but is almost entirely stopped by 5.0 mm5.0\text{ mm} of aluminum. Therefore, S2S_2 is a beta (β\beta) emitter.
  • Source S3S_3:

    • With paper: Rnet=1855 cpm−24.0 cpm=1831 cpmR_{\text{net}} = 1855\text{ cpm} - 24.0\text{ cpm} = 1831\text{ cpm} (virtually unattenuated).
    • With aluminum: Rnet=1640 cpm−24.0 cpm=1616 cpmR_{\text{net}} = 1640\text{ cpm} - 24.0\text{ cpm} = 1616\text{ cpm} (≈88%\approx 88\% transmission through 5.0 mm5.0\text{ mm} of aluminum).
    • Conclusion: The radiation penetrates both paper and aluminum with minimal attenuation. Therefore, S3S_3 is a gamma (γ\gamma) emitter.

Common Pitfall: Always subtract the background count rate before evaluating the absorption percentage. A gross rate close to RbgR_{\text{bg}} indicates that the radiation has been completely absorbed, not that a small residual fraction is penetrating.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to subtract the background radiation when determining net count rates, directly equating gross count rates to net count rates.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Rnet=Rgross  ⟹  S1 net=3840 cpm, S2 net=5120 cpm, S3 net=1860 cpmR_{\text{net}} = R_{\text{gross}} \implies S_1\text{ net} = 3840\text{ cpm},\, S_2\text{ net} = 5120\text{ cpm},\, S_3\text{ net} = 1860\text{ cpm}

    Correct

    Rnet=Rgross−Rbg  ⟹  S1 net=3816 cpm, S2 net=5096 cpm, S3 net=1836 cpmR_{\text{net}} = R_{\text{gross}} - R_{\text{bg}} \implies S_1\text{ net} = 3816\text{ cpm},\, S_2\text{ net} = 5096\text{ cpm},\, S_3\text{ net} = 1836\text{ cpm}

    To determine the true net count rate produced by a source alone, you must subtract the background count rate (Rbg=24.0 cpmR_{\text{bg}} = 24.0\text{ cpm}) from the gross count rate recorded by the detector.

  2. Step 2

    S1S_1: Paper absorbs radiation down to background (26 cpm≈24 cpm26\text{ cpm} \approx 24\text{ cpm}), so S1S_1 is alpha.   ⟹  S2\implies S_2: Passes through paper but stopped by aluminum (28 cpm≈24 cpm28\text{ cpm} \approx 24\text{ cpm}), so S2S_2 is beta.   ⟹  S3\implies S_3: Passes through both paper and aluminum with little attenuation, so S3S_3 is gamma.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly classified the three radiation types as alpha, beta, and gamma based on their differential penetration properties.

You recognized that count rates close to 24 cpm24\text{ cpm} represent complete absorption down to background radiation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Gross vs. net count rate confusion

You equated net count rate directly to gross count rate instead of subtracting the background count rate.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the definition of net count rate, which isolates the activity of the radioactive sample from ambient environmental radiation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Net Count Rate Definition
  • Rnet=Rgross−RbgR_{\text{net}} = R_{\text{gross}} - R_{\text{bg}}

  • Always subtract the ambient background rate from every measured gross count before reporting the source's net activity or transmission fraction.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Subtract the background count rate Rbg=24.0 cpmR_{\text{bg}} = 24.0\text{ cpm} from each gross count rate under condition (i):

  2. Rnet,1=3840 cpm−24.0 cpm=3816 cpmR_{\text{net}, 1} = 3840\text{ cpm} - 24.0\text{ cpm} = 3816\text{ cpm}

  3. Rnet,2=5120 cpm−24.0 cpm=5096 cpmR_{\text{net}, 2} = 5120\text{ cpm} - 24.0\text{ cpm} = 5096\text{ cpm}

  4. Rnet,3=1860 cpm−24.0 cpm=1836 cpmR_{\text{net}, 3} = 1860\text{ cpm} - 24.0\text{ cpm} = 1836\text{ cpm}

Final answer

Net count rates: S1=3816 cpmS_1 = 3816\text{ cpm}, S2=5096 cpmS_2 = 5096\text{ cpm}, S3=1836 cpmS_3 = 1836\text{ cpm}. Classifications: S1S_1 is an α\alpha emitter, S2S_2 is a β\beta emitter, and S3S_3 is a γ\gamma emitter.

NEXT STEPS
Final Takeaways from Your Teacher
  • Write down the formula Rnet=Rgross−RbgR_{\text{net}} = R_{\text{gross}} - R_{\text{bg}} at the start of any radiation experiment calculation.

  • Practice calculating net counts and transmission ratios for multi-component shielding setups.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the penetrating powers of alpha and beta radiation, misidentifying S1 as beta and S2 as alpha.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Rnet=Rgross−24.0 cpmR_{\text{net}} = R_{\text{gross}} - 24.0\text{ cpm} ⟹ S1:3840−24.0=3816.0 cpmS_1: 3840 - 24.0 = 3816.0\text{ cpm}, S2:5120−24.0=5096.0 cpmS_2: 5120 - 24.0 = 5096.0\text{ cpm}, S3:1860−24.0=1836.0 cpmS_3: 1860 - 24.0 = 1836.0\text{ cpm}

  2. Step 2

    S1S_1 is absorbed by paper, which indicates beta radiation.

    Correct

    S1S_1 is stopped by paper (0.10 mm0.10\text{ mm}), which indicates alpha (α\alpha) radiation.

    Alpha (α\alpha) particles have a high mass and charge, giving them very low penetrating power so that even a single sheet of paper completely absorbs them. Beta particles easily penetrate thin paper.

  3. Step 3

    S2S_2 penetrates paper and is stopped by aluminum, which indicates alpha radiation.

    Correct

    S2S_2 penetrates paper but is stopped by 5.0 mm5.0\text{ mm} of aluminum, which indicates beta (β\beta) radiation.

    Fast-moving electrons or positrons (beta particles) pass through paper but are completely stopped by a few millimeters of aluminum.

  4. Step 4

    S3S_3 penetrates aluminum, which indicates gamma radiation.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly subtracted the background radiation of 24.0 cpm24.0\text{ cpm} to determine the true initial activity of each source.

You accurately read the absorption behavior of each source under the different shielding configurations.

You correctly identified gamma radiation by its ability to penetrate dense aluminum shielding.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Penetrating Power Inversion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You inverted the absorption properties of alpha and beta radiation, misattributing paper-stopping ability to beta particles and aluminum-stopping ability to alpha particles.

REASONING PATH
Your ACEpath teacher’s suggested approach
Relative Penetrating Powers
  • Penetrating power ranks α<β<γ\alpha < \beta < \gamma. Alpha is stopped by paper, beta penetrates paper but is stopped by a few millimeters of aluminum, and gamma penetrates both.

  • Check shielding materials in order of thickness/density: paper blocks α\alpha, thin aluminum blocks β\beta, and thick lead/concrete attenuates γ\gamma.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall the ionizing power vs. penetrating power ranking: alpha particles ionize heavily and have the shortest range, so paper completely blocks them.

  2. Beta particles have lower ionization density and greater range, easily passing through paper but getting blocked by several millimeters of metal such as aluminum.

Final answer

S1S_1 is an alpha (α\alpha) emitter, S2S_2 is a beta (β\beta) emitter, and S3S_3 is a gamma (γ\gamma) emitter.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the physical properties (mass, charge, and specific ionization) of α\alpha, β\beta, and γ\gamma radiations to anchor why their penetrating abilities differ.

  • Practice identifying radiation types from transmission count tables with various absorbers (paper, aluminum, lead).

OverviewACEpath Teacher's Diagnosis

03 The student compares counts against zero rather than the 24.0 cpm background level, concluding that residual counts indicate the radiation was not completely absorbed.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Rnet=Rgross−24.0 cpm  ⟹  S1:3840−24.0=3816.0 cpm,  S2:5120−24.0=5096.0 cpm,  S3:1860−24.0=1836.0 cpmR_{\text{net}} = R_{\text{gross}} - 24.0\text{ cpm} \implies S_1: 3840 - 24.0 = 3816.0\text{ cpm},\; S_2: 5120 - 24.0 = 5096.0\text{ cpm},\; S_3: 1860 - 24.0 = 1836.0\text{ cpm}

  2. Step 2

    S1S_1 has 26.0 cpm26.0\text{ cpm} with paper >0 cpm  ⟹  > 0\text{ cpm} \implies paper does not fully absorb it; S2S_2 has 28.0 cpm28.0\text{ cpm} with aluminum >0 cpm  ⟹  > 0\text{ cpm} \implies aluminum does not fully absorb it; conclude all sources emit mixtures of gamma rays.

    Correct

    Net count rate with shield: Rnet=Rgross−RbgR_{\text{net}} = R_{\text{gross}} - R_{\text{bg}}. For S1S_1 with paper, Rnet=26.0−24.0=2.0 cpm≈0R_{\text{net}} = 26.0 - 24.0 = 2.0\text{ cpm} \approx 0 (alpha emitter). For S2S_2 with aluminum, Rnet=28.0−24.0=4.0 cpm≈0R_{\text{net}} = 28.0 - 24.0 = 4.0\text{ cpm} \approx 0 (beta emitter). For S3S_3, radiation passes paper and aluminum with minimal attenuation (gamma emitter).

    You compared the shielded gross counts to 0 cpm0\text{ cpm} instead of subtracting the 24.0 cpm24.0\text{ cpm} background. Gross counts near 24.0 cpm24.0\text{ cpm} indicate that the source radiation is completely blocked and only background radiation remains.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the background count rate as 24.0 cpm24.0\text{ cpm} and subtracted it to find the unshielded net count rates.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Background Subtraction Omission

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated complete absorption as a gross reading of 0 cpm0\text{ cpm} rather than evaluating whether the net count rate (Rgross−RbgR_{\text{gross}} - R_{\text{bg}}) drops to zero within statistical fluctuations.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define Complete Absorption in Radiation Detection
  • Complete absorption of source radiation occurs when Rnet=Rgross−Rbg≈0 cpmR_{\text{net}} = R_{\text{gross}} - R_{\text{bg}} \approx 0\text{ cpm}, meaning the gross detector reading equals the ambient background level.

  • Always subtract RbgR_{\text{bg}} from every shielded measurement before determining penetration or transmission percentage.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate net counts with paper: for S1S_1, Rnet=26.0−24.0=2.0 cpm≈0 cpmR_{\text{net}} = 26.0 - 24.0 = 2.0\text{ cpm} \approx 0\text{ cpm}, meaning paper stops it completely, so S1S_1 is an alpha (α\alpha) emitter.

  2. Calculate net counts with aluminum: for S2S_2, paper allows 5090−24.0=5066 cpm5090 - 24.0 = 5066\text{ cpm} through, but 5.0 mm5.0\text{ mm} aluminum reduces net counts to 28.0−24.0=4.0 cpm≈0 cpm28.0 - 24.0 = 4.0\text{ cpm} \approx 0\text{ cpm}, so S2S_2 is a beta (β\beta) emitter.

  3. For S3S_3, net counts remain high through paper (1831 cpm1831\text{ cpm}) and aluminum (1616 cpm1616\text{ cpm}), showing high penetration characteristic of gamma (γ\gamma) radiation.

Final answer

S1S_1 is an alpha (α\alpha) emitter, S2S_2 is a beta (β\beta) emitter, and S3S_3 is a gamma (γ\gamma) emitter.

NEXT STEPS
Final Takeaways from Your Teacher
  • Subtract background radiation from all experimental configurations, not just the unshielded baseline.

  • Review the characteristic absorption thresholds: paper stops alpha, a few millimeters of aluminum stops beta, and lead or thick matter attenuates gamma.

Lock it in

Similar question

01

A laboratory detector records a background rate of 18 cpm18\text{ cpm}. When a radioactive source is placed in front of the counter, the gross count rate is 1250 cpm1250\text{ cpm}. After placing a 1 mm1\text{ mm} plastic sheet between the source and detector, the gross rate drops to 19 cpm19\text{ cpm}. Calculate the net initial count rate and identify the radiation type.

Answer

Net initial count rate: 1250 cpm−18 cpm=1232 cpm1250\text{ cpm} - 18\text{ cpm} = 1232\text{ cpm}. The net count rate with the plastic sheet is 19 cpm−18 cpm=1 cpm≈0 cpm19\text{ cpm} - 18\text{ cpm} = 1\text{ cpm} \approx 0\text{ cpm}. Because the radiation is completely stopped by a thin low-density barrier, the source is an alpha (α\alpha) emitter (or very low-energy beta).

02

A GM counter with a background of 32 cpm32\text{ cpm} is used to test an unknown source. The gross rate is 2480 cpm2480\text{ cpm} with no absorber, 2470 cpm2470\text{ cpm} with paper, and 45 cpm45\text{ cpm} with 6 mm6\text{ mm} of aluminum. Find the net unshielded rate and the percentage transmission through the aluminum.

Answer

Net initial rate: 2480 cpm−32 cpm=2448 cpm2480\text{ cpm} - 32\text{ cpm} = 2448\text{ cpm}. Net rate with aluminum: 45 cpm−32 cpm=13 cpm45\text{ cpm} - 32\text{ cpm} = 13\text{ cpm}. Transmission percentage: 132448×100%≈0.53%\frac{13}{2448} \times 100\% \approx 0.53\%. The source is a beta (β\beta) emitter.

03

A mixed source emits both beta (β\beta) and gamma (γ\gamma) radiation. The detector measures a background of 25 cpm25\text{ cpm}. The gross rates are: no absorber =3625 cpm= 3625\text{ cpm}; with 5 mm5\text{ mm} aluminum =825 cpm= 825\text{ cpm}; with 5 cm5\text{ cm} lead =105 cpm= 105\text{ cpm}. Calculate the individual net count rates contributed by the beta particles alone and by the gamma rays alone before shielding.

Answer

Total net rate: 3625−25=3600 cpm3625 - 25 = 3600\text{ cpm}. The 5 mm5\text{ mm} aluminum stops all beta particles while passing virtually all gamma rays, giving a net gamma rate of 825−25=800 cpm825 - 25 = 800\text{ cpm}. Therefore, the net beta count rate is 3600−800=2800 cpm3600 - 800 = 2800\text{ cpm}.

Loading workspace…