Resources

A thin conductive horizontal bar of length L=0.300 mL = 0.300\text{ m} and mass m=0.0450 kgm = 0.0450\text{ kg} is suspended horizontally by two identical vertical massless conducting springs, each with spring constant k=18.0 N/mk = 18.0\text{ N/m}. The bar is immersed in a uniform horizontal magnetic field B=0.750 TB = 0.750\text{ T} directed perpendicular to the bar. When a steady current I=1.60 AI = 1.60\text{ A} is passed through the bar, the resulting magnetic force points vertically downward, aiding gravity. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, calculate the total equilibrium stretch Δy\Delta y of each spring.

Answer and steps

Final answer

Δy=0.0222 m\Delta y = 0.0222\text{ m} (or 2.22 cm2.22\text{ cm})

Steps

01

Identify the forces acting on the bar

At equilibrium, the net vertical force on the horizontal conducting bar must equal zero: ∑Fy=0\sum F_y = 0

Three vertical forces act on the bar:

  1. Gravitational force (FgF_g), acting vertically downward: Fg=mgF_g = mg
  2. Magnetic force (FBF_B), acting on a current-carrying wire of length LL in a perpendicular magnetic field BB. The problem specifies that this force points downward (aiding gravity): FB=ILBsin⁡(90∘)=ILBF_B = I L B \sin(90^\circ) = I L B
  3. Restoring force from the springs (FspringF_{\text{spring}}), acting vertically upward. Because the bar is supported by two identical springs in parallel, each stretched by an amount Δy\Delta y: Fspring=2⋅(kΔy)=2kΔyF_{\text{spring}} = 2 \cdot (k \Delta y) = 2k \Delta y

02

Calculate the downward forces

  • Downward gravitational force: Fg=(0.0450 kg)⋅(9.80 m/s2)=0.441 NF_g = (0.0450\text{ kg}) \cdot (9.80\text{ m/s}^2) = 0.441\text{ N}
  • Downward magnetic force: FB=(1.60 A)⋅(0.300 m)⋅(0.750 T)=0.360 NF_B = (1.60\text{ A}) \cdot (0.300\text{ m}) \cdot (0.750\text{ T}) = 0.360\text{ N}
  • Total downward force: Fdown=Fg+FB=0.441 N+0.360 N=0.801 NF_{\text{down}} = F_g + F_B = 0.441\text{ N} + 0.360\text{ N} = 0.801\text{ N}

03

Apply the equilibrium condition and solve for Δy\Delta y

Equating the total upward force to the total downward force: 2kΔy=mg+ILB2k \Delta y = mg + I L B

Rearrange for the stretch Δy\Delta y: Δy=mg+ILB2k\Delta y = \frac{mg + I L B}{2k}

Substitute the numerical values: Δy=0.801 N2⋅18.0 N/m=0.801 N36.0 N/m≈0.0222 m (or 2.22 cm)\Delta y = \frac{0.801\text{ N}}{2 \cdot 18.0\text{ N/m}} = \frac{0.801\text{ N}}{36.0\text{ N/m}} \approx 0.0222\text{ m} \text{ (or } 2.22\text{ cm)}

Common Pitfall: A frequent mistake is using kΔyk \Delta y instead of 2kΔy2k \Delta y. Because the bar is suspended symmetrically by two identical springs, the total upward restoring stiffness is shared equally, giving an effective stiffness of 2k2k.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets that the bar is supported by two springs rather than one, dividing the total downward force by k instead of 2k.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Fg=mg=0.441 NF_g = mg = 0.441\text{ N}

  2. Step 2

    FB=ILB=1.60⋅0.300⋅0.750=0.360 NF_B = ILB = 1.60 \cdot 0.300 \cdot 0.750 = 0.360\text{ N}

  3. Step 3

    Ftotal=0.441+0.360=0.801 NF_{\text{total}} = 0.441 + 0.360 = 0.801\text{ N}

  4. Step 4

    k⋅Δy=Ftotal  ⟹  Δy=0.80118.0=0.0445 mk \cdot \Delta y = F_{\text{total}} \implies \Delta y = \frac{0.801}{18.0} = 0.0445\text{ m}

    Correct

    2kΔy=Fdown  ⟹  Δy=0.801 N2(18.0 N/m)≈0.0222 m2k\Delta y = F_{\text{down}} \implies \Delta y = \frac{0.801\text{ N}}{2(18.0\text{ N/m})} \approx 0.0222\text{ m}

    The bar is suspended symmetrically by two identical springs in parallel. Both springs exert an upward restoring force kΔyk\Delta y, so the total upward force is 2kΔy2k\Delta y rather than kΔyk\Delta y.

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the gravitational force acting on the mass accurately.

You correctly computed the magnitude of the magnetic force using F=ILBF = ILB.

You properly added the downward forces to find the total load.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted parallel spring factor

You equated the total downward load to the restoring force of a single spring kΔyk\Delta y rather than two springs in parallel.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking that two identical parallel supports share the suspended load equally, doubling the effective restoring stiffness to 2k2k.

REASONING PATH
Your ACEpath teacher’s suggested approach
Count All Supporting Elements
  • For nn identical vertical springs in parallel sharing an equal displacement Δy\Delta y, the total upward restoring force is n⋅kΔyn \cdot k\Delta y.

  • Always draw a free-body diagram showing each spring tension force separately before setting up ∑Fy=0\sum F_y = 0.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up vertical equilibrium with two springs: 2kΔy=Ftotal2k\Delta y = F_{\text{total}}

  2. Substitute the total downward force: 2(18.0 N/m)Δy=0.801 N2(18.0\text{ N/m})\Delta y = 0.801\text{ N}

  3. Solve for the stretch: Δy=0.801 N36.0 N/m≈0.0222 m\Delta y = \frac{0.801\text{ N}}{36.0\text{ N/m}} \approx 0.0222\text{ m}

Final answer

Δy=0.0222 m\Delta y = 0.0222\text{ m} (or 2.22 cm2.22\text{ cm})

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw an explicit free-body diagram of the bar showing two distinct upward spring force arrows Fs1F_{s1} and Fs2F_{s2}.

  • Practice problems involving multiple parallel supports, such as multiple springs or strings holding a rigid beam.

OverviewACEpath Teacher's Diagnosis

02 The student subtracts the magnetic force from gravity instead of adding it, incorrectly treating the magnetic force as opposing gravity despite the problem stating it aids gravity.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Fg=mg=0.0450×9.80=0.441 N  ⟹  FB=ILB=1.60×0.300×0.750=0.360 NF_g = mg = 0.0450 \times 9.80 = 0.441\text{ N} \implies F_B = ILB = 1.60 \times 0.300 \times 0.750 = 0.360\text{ N}

  2. Step 2

    Fnet=Fg−FB=0.441−0.360=0.081 NF_{net} = F_g - F_B = 0.441 - 0.360 = 0.081\text{ N}

    Correct

    Fdown=Fg+FB=0.441 N+0.360 N=0.801 NF_{\text{down}} = F_g + F_B = 0.441\text{ N} + 0.360\text{ N} = 0.801\text{ N}

    You subtracted the magnetic force from the gravitational force. Because the problem states that the magnetic force points vertically downward and aids gravity, both forces act in the same direction and must be added together.

  3. Step 3

    2⋅k⋅Δy=0.081  ⟹  Δy=0.081/36.0=0.00225 m2 \cdot k \cdot \Delta y = 0.081 \implies \Delta y = 0.081 / 36.0 = 0.00225\text{ m}

    Correct

    2kΔy=0.801 N  ⟹  Δy=0.801 N36.0 N/m≈0.0222 m2k\Delta y = 0.801\text{ N} \implies \Delta y = \frac{0.801\text{ N}}{36.0\text{ N/m}} \approx 0.0222\text{ m}

    Your setup using 2kΔy2k\Delta y for the two supporting springs is mathematically sound, but substituting the incorrect net downward force propagated to an incorrect final stretch.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used Fg=mgF_g = mg and FB=ILBF_B = ILB to find the force magnitudes.

You correctly identified that the two identical springs act in parallel, giving an effective stiffness of 2k2k.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect force direction in equilibrium equation

You set the magnetic force opposite to gravity rather than aligned with gravity as stated in the problem.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating magnetic levitation or opposition to gravity as an automatic default rather than drawing a free-body diagram based on the explicit direction given in the problem statement.

REASONING PATH
Your ACEpath teacher’s suggested approach
Draw a free-body diagram before writing equilibrium equations
  • At static equilibrium, ∑Fy=0\sum F_y = 0, meaning the sum of all upward forces equals the sum of all downward forces: Fup=FdownF_{\text{up}} = F_{\text{down}}.

  • Sketch the object and draw arrows for every force. If a force is stated to aid gravity, point its vector downward along with gravity.

Check the sign convention against problem wording
  • Wording such as 'aiding gravity' or 'downward' means FBF_B adds to FgF_g, whereas 'opposing gravity' or 'levitating' means FBF_B acts upward.

  • Underline directional keywords in the prompt to verify whether external forces add to or subtract from weight.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Sum the downward forces: Fdown=Fg+FB=0.441 N+0.360 N=0.801 NF_{\text{down}} = F_g + F_B = 0.441\text{ N} + 0.360\text{ N} = 0.801\text{ N}.

  2. Equate the total upward spring force to the total downward force: 2kΔy=Fdown2k\Delta y = F_{\text{down}}.

  3. Solve for the stretch: Δy=0.801 N2×18.0 N/m=0.801 N36.0 N/m≈0.0222 m\Delta y = \frac{0.801\text{ N}}{2 \times 18.0\text{ N/m}} = \frac{0.801\text{ N}}{36.0\text{ N/m}} \approx 0.0222\text{ m}.

Final answer

Δy=0.0222 m\Delta y = 0.0222\text{ m} (or 2.22 cm2.22\text{ cm})

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice drawing quick free-body diagrams to explicitly label the upward and downward vector directions before combining terms.

  • Review textbook problems involving magnetic forces on wires where the current direction alternates between aiding and opposing gravity.

OverviewACEpath Teacher's Diagnosis

03 The student treats the two springs in parallel as having an equivalent spring constant of k/2 as if they were connected in series.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Fg=mg=0.0450×9.80=0.441 NF_g = mg = 0.0450 \times 9.80 = 0.441\text{ N}

  2. Step 2

    FB=ILB=1.60×0.300×0.750=0.360 NF_B = ILB = 1.60 \times 0.300 \times 0.750 = 0.360\text{ N}

  3. Step 3

    Ftotal=0.441+0.360=0.801 NF_{\text{total}} = 0.441 + 0.360 = 0.801\text{ N}

  4. Step 4

    Keq=k2=9.0 N/mK_{eq} = \frac{k}{2} = 9.0\text{ N/m}

    Correct

    keq=2k=2(18.0 N/m)=36.0 N/mk_{\text{eq}} = 2k = 2(18.0\text{ N/m}) = 36.0\text{ N/m}

    The two springs suspend the horizontal bar side-by-side in parallel, meaning each spring undergoes the identical displacement Δy\Delta y. Their restoring forces add together (Fspring=kΔy+kΔy=2kΔyF_{\text{spring}} = k\Delta y + k\Delta y = 2k\Delta y), giving an equivalent stiffness of keq=2k=36.0 N/mk_{\text{eq}} = 2k = 36.0\text{ N/m}, not k2\frac{k}{2}.

  5. Step 5

    Δy=FtotalKeq=0.8019.0=0.0890 m\Delta y = \frac{F_{\text{total}}}{K_{eq}} = \frac{0.801}{9.0} = 0.0890\text{ m}

    Correct

    Δy=Ftotalkeq=0.801 N36.0 N/m≈0.0222 m\Delta y = \frac{F_{\text{total}}}{k_{\text{eq}}} = \frac{0.801\text{ N}}{36.0\text{ N/m}} \approx 0.0222\text{ m}

    Because your equivalent spring constant was four times too small, your resulting stretch was four times larger than the correct value.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the gravitational force using Fg=mgF_g = mg.

You applied the magnetic force formula FB=ILBF_B = ILB accurately.

You recognized that gravity and the magnetic force act in the same downward direction and summed them correctly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Parallel vs. Series Spring Combination

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated two side-by-side supporting springs sharing a common displacement as a series combination (keq=k/2k_{\text{eq}} = k/2) rather than a parallel combination (keq=k1+k2=2kk_{\text{eq}} = k_1 + k_2 = 2k).

REASONING PATH
Your ACEpath teacher’s suggested approach
Springs in Parallel (Same Stretch)
  • When multiple springs undergo the same elongation Δy\Delta y, their restoring forces add: Fnet=(k1+k2)ΔyF_{\text{net}} = (k_1 + k_2)\Delta y, so keq=k1+k2k_{\text{eq}} = k_1 + k_2.

  • Check whether the springs share the load side-by-side. If both stretch by Δy\Delta y, add their spring constants directly.

Springs in Series (Same Tension)
  • When springs are connected end-to-end, each carries the same force and displacements add: 1keq=1k1+1k2\frac{1}{k_{\text{eq}}} = \frac{1}{k_1} + \frac{1}{k_2}.

  • Use the reciprocal rule only when the springs are linked end-to-end along a single line of action.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify that the two identical vertical springs stretch together by the same amount Δy\Delta y, acting in parallel: keq=k+k=2(18.0 N/m)=36.0 N/mk_{\text{eq}} = k + k = 2(18.0\text{ N/m}) = 36.0\text{ N/m}.

  2. Equate the total upward restoring force to the total downward force: keqΔy=Ftotal  ⟹  (36.0 N/m)Δy=0.801 Nk_{\text{eq}} \Delta y = F_{\text{total}} \implies (36.0\text{ N/m}) \Delta y = 0.801\text{ N}.

  3. Solve for the equilibrium stretch: Δy=0.801 N36.0 N/m≈0.02225 m≈0.0222 m\Delta y = \frac{0.801\text{ N}}{36.0\text{ N/m}} \approx 0.02225\text{ m} \approx 0.0222\text{ m}.

Final answer

Δy=0.0222 m (or 2.22 cm)\Delta y = 0.0222\text{ m} \text{ (or } 2.22\text{ cm)}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice drawing free-body diagrams showing the individual upward force from each spring (kΔyk\Delta y) explicitly.

  • Review the physical distinction between parallel springs (shared displacement, forces add) and series springs (shared load, stretches add).

Lock it in

Similar question

01

A horizontal conductive rod of mass m=0.060 kgm = 0.060\text{ kg} is suspended by two identical vertical springs, each with spring constant k=25 N/mk = 25\text{ N/m}. No magnetic field is present. Taking g=9.8 m/s2g = 9.8\text{ m/s}^2, find the equilibrium stretch Δy\Delta y of each spring.

Answer

Δy=0.0118 m\Delta y = 0.0118\text{ m} (or 1.18 cm1.18\text{ cm}). Key steps: The total downward force is Fg=mg=(0.060)(9.8)=0.588 NF_g = mg = (0.060)(9.8) = 0.588\text{ N}. Vertical equilibrium requires 2kΔy=Fg2k\Delta y = F_g, so Δy=0.5882(25)=0.58850=0.01176 m≈0.0118 m\Delta y = \frac{0.588}{2(25)} = \frac{0.588}{50} = 0.01176\text{ m} \approx 0.0118\text{ m}.

02

A horizontal bar of length L=0.20 mL = 0.20\text{ m} and mass m=0.030 kgm = 0.030\text{ kg} is suspended by two identical vertical springs with k=15 N/mk = 15\text{ N/m}. A uniform magnetic field B=0.50 TB = 0.50\text{ T} is directed horizontally perpendicular to the bar. A current II is passed through the bar such that the magnetic force points upward (opposing gravity). If each spring stretches by only Δy=0.0040 m\Delta y = 0.0040\text{ m} at equilibrium, find the required current II. (Use g=9.8 m/s2g = 9.8\text{ m/s}^2.)

Answer

I=1.74 AI = 1.74\text{ A}. Key steps: Total upward force is 2kΔy+FB=mg2k\Delta y + F_B = mg. Upward spring force is 2(15)(0.0040)=0.120 N2(15)(0.0040) = 0.120\text{ N}. Downward gravity is mg=(0.030)(9.8)=0.294 Nmg = (0.030)(9.8) = 0.294\text{ N}. The magnetic force must provide FB=mg−2kΔy=0.294−0.120=0.174 NF_B = mg - 2k\Delta y = 0.294 - 0.120 = 0.174\text{ N}. Since FB=ILBF_B = ILB, I=0.174(0.20)(0.50)=1.74 AI = \frac{0.174}{(0.20)(0.50)} = 1.74\text{ A}.

03

A rigid conductive bar of length L=0.40 mL = 0.40\text{ m} and mass m=0.080 kgm = 0.080\text{ kg} carrying a current I=2.5 AI = 2.5\text{ A} is suspended horizontally by four identical vertical springs arranged symmetrically in parallel. A horizontal magnetic field B=0.60 TB = 0.60\text{ T} exerts a downward force on the bar. If the equilibrium stretch of the springs is Δy=0.015 m\Delta y = 0.015\text{ m}, calculate the spring constant kk of each individual spring. (Use g=9.8 m/s2g = 9.8\text{ m/s}^2.)

Answer

k=23.1 N/mk = 23.1\text{ N/m}. Key steps: Downward gravity is Fg=mg=(0.080)(9.8)=0.784 NF_g = mg = (0.080)(9.8) = 0.784\text{ N}. Downward magnetic force is FB=ILB=(2.5)(0.40)(0.60)=0.600 NF_B = ILB = (2.5)(0.40)(0.60) = 0.600\text{ N}. Total downward force Fdown=0.784+0.600=1.384 NF_{\text{down}} = 0.784 + 0.600 = 1.384\text{ N}. Equilibrium with 4 identical springs gives 4kΔy=Fdown4k\Delta y = F_{\text{down}}, so k=1.3844(0.015)=1.3840.060≈23.1 N/mk = \frac{1.384}{4(0.015)} = \frac{1.384}{0.060} \approx 23.1\text{ N/m}.

Loading workspace…