Resources
A vertical, cylindrical container of cross-sectional area is sealed at the top by a frictionless, movable piston of mass . The cylinder contains an ideal gas under an atmospheric pressure of . Taking the acceleration due to gravity as , heat is slowly added to the gas from a heating element below, transferring into the gas and causing the piston to rise quasi-statically by a vertical displacement of . Calculate: (a) the absolute equilibrium pressure of the gas inside the cylinder, (b) the work done by the gas , and (c) the change in internal energy of the gas.
Answer and steps
Final answer
(a) ; (b) ; (c) .
Steps
Part (a): Absolute Equilibrium Pressure of the Gas
Because the piston moves slowly (quasi-statically) without friction, it remains in mechanical equilibrium throughout the process.
The downward forces acting on the piston are:
- The force from atmospheric pressure:
- The weight of the piston:
The upward force is exerted by the gas inside the cylinder:
Setting the net vertical force to zero:
Dividing both sides by the cross-sectional area gives the absolute pressure:
Substitute the given values into the equation:
Part (b): Work Done by the Gas
Throughout the heating process, the atmospheric pressure and the piston's weight remain constant, meaning the gas expands isobarically (at constant pressure ).
The change in volume of the gas is:
The work done by an expanding gas at constant pressure is:
Using the unrounded value of :
(Alternatively, the work can be calculated directly from the force exerted by the gas: .)
Part (c): Change in Internal Energy of the Gas
According to the First Law of Thermodynamics:
where:
- is the heat added to the system (),
- is the work done by the system ().
Substitute these quantities into the equation:
Common Pitfall: Be careful with signs in the First Law. When heat is added to the system, . When the gas expands, it does positive work on the surroundings, so , which subtracts from the thermal energy added to find .
Typical errors
01 The student ignores atmospheric pressure and equates the gas pressure solely to the gauge pressure exerted by the piston's weight.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You calculated only the gauge pressure caused by the piston's weight. The outside atmosphere also pushes down on top of the piston with pressure , so the total equilibrium pressure inside the gas is .
- Step 2Correct
Your formula and calculation method are entirely correct, but the result is affected by substituting the incorrect pressure from Part (a).
- Step 3Correct
You set up the First Law of Thermodynamics and used the correct sign convention, but your numerical answer carries over the error in .
WHAT YOU DID WELL
Compliments from Your TeacherYou set up a clear force-to-pressure relation for the piston.
You used the correct expression for work done during isobaric expansion.
You correctly stated and applied the First Law of Thermodynamics with proper signs: .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou equated the absolute gas pressure solely to the pressure exerted by the piston's weight, forgetting the atmospheric pressure acting on the outer face of the piston.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing gauge pressure with absolute pressure when writing the mechanical equilibrium condition for an open-air movable piston.
REASONING PATH
Your ACEpath teacher’s suggested approach- Include All Downward Forces
For a vertical piston open to the atmosphere, the downward force consists of atmospheric force plus the piston weight: .
Draw a free-body diagram of the piston and ensure both downward and upward are accounted for.
- Use Absolute Pressure for Gas Work
Thermodynamic state variables and work done by an ideal gas always require absolute pressure ().
Check whether the system is open to ambient surroundings; if so, add .
CORRECTED PATH
ACEpath Teacher's DemonstrationInclude atmospheric pressure in the vertical equilibrium equation: .
Divide by : .
Recalculate the work done by the gas: .
Apply the First Law of Thermodynamics: .
(a) ; (b) ; (c)
02 The student confuses the sign convention in the first law of thermodynamics and adds work instead of subtracting it.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
Because your definition of work represents work done by the expanding gas on the surroundings, it takes energy away from the gas. In this sign convention, the First Law is .
WHAT YOU DID WELL
Compliments from Your TeacherYou established the correct mechanical equilibrium condition to calculate the internal gas pressure.
You computed the work done by the expanding gas accurately using constant-pressure isobaric expansion.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou mixed the two standard thermodynamic sign conventions by pairing (work done by the system) with (which requires to be work done on the system).
WHY IT HAPPENED
ACEpath Teacher's DiagnosisFailing to explicitly define whether refers to work done by the system or work done on the system before substituting values into the First Law equation.
REASONING PATH
Your ACEpath teacher’s suggested approach- Clarify the Work Sign Convention
If is defined as work done BY the gas, . If is defined as work done ON the gas, , where .
Check whether an expanding gas is giving up energy to push its surroundings; if it expands, work done BY the gas must reduce internal energy.
CORRECTED PATH
ACEpath Teacher's DemonstrationState the First Law using work done by the gas: .
Substitute the given heat input and your calculated work : .
Perform the subtraction: .
(a) , (b) , (c)
03 The student calculates the work done by the gas considering only the work to lift the piston against gravity, omitting the work done against atmospheric pressure.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You calculated only the increase in gravitational potential energy of the piston (). The gas must also do work against atmospheric pressure (), so the total work done by the gas is .
- Step 3Correct
You applied the First Law of Thermodynamics correctly, but your numerical answer was carried over from the incorrect work value in part (b).
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly balanced the forces on the piston to find the absolute equilibrium pressure.
You correctly identified and applied the First Law of Thermodynamics formula with the proper signs.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou confused the net work done on the piston against gravity with the total thermodynamic boundary work done by the gas. When gas expands at constant pressure, the boundary work is , which accounts for both lifting the piston's mass and pushing back the atmosphere.
REASONING PATH
Your ACEpath teacher’s suggested approach- Thermodynamic Work Definition
For any expansion at constant pressure , the work done by the gas is .
Always compute gas work from the absolute pressure acting over the change in volume , rather than tracking only one specific component of the external load.
- Work Against Atmosphere
.
When a piston is open to the atmosphere, verify whether work against the surrounding air is included in your total work term.
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate the volume change of the gas: .
Calculate the isobaric work done by the gas: .
Substitute and into the First Law: .
(a) ; (b) ; (c)
Lock it in
What is the relationship between absolute pressure , atmospheric pressure , and gauge pressure ?
. Gas laws and thermodynamic work calculations always require absolute pressure.
Similar question
A frictionless piston of mass and cross-sectional area rests vertically on a gas container open to an atmosphere of . Taking , find the absolute equilibrium pressure of the trapped gas.
Answer
. Key steps: .
An ideal gas inside a vertical cylinder is sealed by a piston of area under . When of heat is supplied, the piston rises slowly by (). Find the work done by the gas and the change in internal energy .
Answer
, . Key steps: . . .
A horizontal cylinder has a frictionless piston of area holding gas against atmospheric pressure and an external spring pushing inward with force . If the gas absorbs and expands isobarically so the piston moves outward by (assume spring force remains approximately constant), find (a) the gas pressure , (b) the work done by the gas , and (c) .
Answer
(a) , (b) , (c) . Key steps: . . .